! Started logfile: J0853-3824_S_2017_05_27_pus_uvs.log on Fri May 3 11:02:40 2019 obs J0853-3824_S_2017_05_27_pus_uva.fits ! Reading UV FITS file: J0853-3824_S_2017_05_27_pus_uva.fits ! AN table 1: 114 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.475244 visibilities/baseline/integration-bin. ! *** This seems a bit low - see "help observe" on the binwid argument. ! Found source: J0853-3824 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 1211 lines of history. ! ! Reading 9752 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J0853-3824_S_2017_05_27_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 346 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 346 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 346 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 749 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.964699Jy sigma=0.004917 ! Fit after self-cal, rms=0.907949Jy sigma=0.004683 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.499 mas, bmaj=8.573 mas, bpa=0.9687 degrees ! Estimated noise=2687.64 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0689511 Jy ! Component: 100 - total flux cleaned = 0.0903315 Jy ! Total flux subtracted in 100 components = 0.0903315 Jy ! Clean residual min=-0.008641 max=0.011022 Jy/beam ! Clean residual mean=-0.000079 rms=0.002209 Jy/beam ! Combined flux in latest and established models = 0.0903315 Jy ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 15 components and 0.0903315 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.147796Jy sigma=0.000651 ! Fit after self-cal, rms=0.147356Jy sigma=0.000649 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.876 mas, bmaj=12.33 mas, bpa=-1.854 degrees ! Estimated noise=1593.51 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0203256 Jy ! Component: 100 - total flux cleaned = 0.0283981 Jy ! Component: 150 - total flux cleaned = 0.0318569 Jy ! Component: 200 - total flux cleaned = 0.0333457 Jy ! Total flux subtracted in 200 components = 0.0333457 Jy ! Clean residual min=-0.006376 max=0.010961 Jy/beam ! Clean residual mean=-0.000295 rms=0.002158 Jy/beam ! Combined flux in latest and established models = 0.123677 Jy ! Performing phase self-cal ! Adding 33 model components to the UV plane model. ! The established model now contains 44 components and 0.123677 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.145271Jy sigma=0.000633 ! Fit after self-cal, rms=0.145270Jy sigma=0.000633 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.93 HN 0.90 KP 1.02 ! LA 0.96 MK 1.30 NL 1.01 OV 1.21 ! PT 0.97 SC 1.15 ! ! ! Correcting IF 2. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.03 HN 1.13 KP 1.01 ! LA 0.89 MK 1.06 NL 1.27 OV 1.20 ! PT 0.92 SC 0.94 ! ! ! Correcting IF 3. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.99 HN 1.06 KP 0.99 ! LA 0.90 MK 1.04 NL 1.18 OV 1.08 ! PT 0.93 SC 1.08 ! ! ! Correcting IF 4. ! A total of 159 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.04 HN 0.76 KP 1.00* ! LA 0.84 MK 0.84 NL 1.00* OV 1.00* ! PT 0.95 SC 1.00* ! ! ! Fit before self-cal, rms=0.145270Jy sigma=0.000633 ! Fit after self-cal, rms=0.159664Jy sigma=0.000630 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.915 mas, bmaj=12.41 mas, bpa=-1.895 degrees ! Estimated noise=1657.37 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000238852 Jy ! Component: 100 - total flux cleaned = 0.000291265 Jy ! Component: 150 - total flux cleaned = 0.000338065 Jy ! Component: 200 - total flux cleaned = 0.00035919 Jy ! Total flux subtracted in 200 components = 0.00035919 Jy ! Clean residual min=-0.004768 max=0.007154 Jy/beam ! Clean residual mean=-0.000019 rms=0.001501 Jy/beam ! Combined flux in latest and established models = 0.124036 Jy ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 46 components and 0.124036 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.159654Jy sigma=0.000630 ! Fit after self-cal, rms=0.160250Jy sigma=0.000630 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.160250Jy sigma=0.000630 ! Fit after self-cal, rms=0.163153Jy sigma=0.000628 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.921 mas, bmaj=12.47 mas, bpa=-1.958 degrees ! Estimated noise=1661.98 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000236611 Jy ! Component: 100 - total flux cleaned = 0.000263056 Jy ! Component: 150 - total flux cleaned = 0.000286476 Jy ! Component: 200 - total flux cleaned = 0.000305425 Jy ! Total flux subtracted in 200 components = 0.000305425 Jy ! Clean residual min=-0.004339 max=0.006383 Jy/beam ! Clean residual mean=-0.000015 rms=0.001336 Jy/beam ! Combined flux in latest and established models = 0.124342 Jy selfcal ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 48 components and 0.124342 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.163144Jy sigma=0.000628 ! Fit after self-cal, rms=0.163305Jy sigma=0.000628 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-14, -4.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00590446 Jy ! Component: 100 - total flux cleaned = 0.00760848 Jy ! Component: 150 - total flux cleaned = 0.00783302 Jy ! Component: 200 - total flux cleaned = 0.00777825 Jy ! Total flux subtracted in 200 components = 0.00777825 Jy ! Clean residual min=-0.003939 max=0.004624 Jy/beam ! Clean residual mean=0.000035 rms=0.001071 Jy/beam ! Combined flux in latest and established models = 0.13212 Jy ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 72 components and 0.13212 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.163078Jy sigma=0.000627 ! Fit after self-cal, rms=0.162912Jy sigma=0.000627 ! Inverting map ! Added new window around map position (67, 111.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00448527 Jy ! Component: 100 - total flux cleaned = 0.00664493 Jy ! Component: 150 - total flux cleaned = 0.00710372 Jy ! Component: 200 - total flux cleaned = 0.0073611 Jy ! Total flux subtracted in 200 components = 0.0073611 Jy ! Clean residual min=-0.004382 max=0.003655 Jy/beam ! Clean residual mean=0.000031 rms=0.000975 Jy/beam ! Combined flux in latest and established models = 0.139481 Jy ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 86 components and 0.139481 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.162731Jy sigma=0.000626 ! Fit after self-cal, rms=0.162666Jy sigma=0.000626 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.162666Jy sigma=0.000626 ! Fit after self-cal, rms=0.156322Jy sigma=0.000625 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.882 mas, bmaj=12.4 mas, bpa=-2.338 degrees ! Estimated noise=1643.51 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00342214 Jy ! Component: 100 - total flux cleaned = 0.00379433 Jy ! Component: 150 - total flux cleaned = 0.00371643 Jy ! Component: 200 - total flux cleaned = 0.00364899 Jy ! Total flux subtracted in 200 components = 0.00364899 Jy ! Clean residual min=-0.004124 max=0.003350 Jy/beam ! Clean residual mean=-0.000010 rms=0.000875 Jy/beam ! Combined flux in latest and established models = 0.14313 Jy selfcal ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 95 components and 0.14313 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.156192Jy sigma=0.000625 ! Fit after self-cal, rms=0.155994Jy sigma=0.000625 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00166872 Jy ! Component: 100 - total flux cleaned = 0.00153302 Jy ! Component: 150 - total flux cleaned = 0.00147057 Jy ! Component: 200 - total flux cleaned = 0.00135467 Jy ! Total flux subtracted in 200 components = 0.00135467 Jy ! Clean residual min=-0.004060 max=0.003392 Jy/beam ! Clean residual mean=0.000004 rms=0.000870 Jy/beam ! Combined flux in latest and established models = 0.144485 Jy ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 106 components and 0.144485 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.155914Jy sigma=0.000625 ! Fit after self-cal, rms=0.155890Jy sigma=0.000625 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.155890Jy sigma=0.000625 ! Fit after self-cal, rms=0.152225Jy sigma=0.000624 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=9.75 mas, bmaj=33.12 mas, bpa=-5.627 degrees ! Estimated noise=1829.99 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00115228 Jy ! Component: 100 - total flux cleaned = 0.00107092 Jy ! Component: 150 - total flux cleaned = 0.000915784 Jy ! Component: 200 - total flux cleaned = 0.000813037 Jy ! Total flux subtracted in 200 components = 0.000813037 Jy ! Clean residual min=-0.003312 max=0.002738 Jy/beam ! Clean residual mean=-0.000024 rms=0.000930 Jy/beam ! Combined flux in latest and established models = 0.145298 Jy selfcal ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 116 components and 0.145298 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.152179Jy sigma=0.000624 ! Fit after self-cal, rms=0.152055Jy sigma=0.000624 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000622005 Jy ! Component: 100 - total flux cleaned = 0.00058168 Jy ! Component: 150 - total flux cleaned = 0.000513081 Jy ! Component: 200 - total flux cleaned = 0.000355718 Jy ! Total flux subtracted in 200 components = 0.000355718 Jy ! Clean residual min=-0.003255 max=0.002754 Jy/beam ! Clean residual mean=-0.000009 rms=0.000926 Jy/beam ! Combined flux in latest and established models = 0.145654 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 127 components and 0.145654 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.152033Jy sigma=0.000624 ! Fit after self-cal, rms=0.152038Jy sigma=0.000624 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.862 mas, bmaj=12.35 mas, bpa=-2.484 degrees ! Estimated noise=1637.04 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.862 x 12.35 at -2.484 degrees (North through East) ! Clean map min=-0.004816 max=0.094101 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.517 mas, bmaj=8.614 mas, bpa=0.426 degrees ! Estimated noise=2749.57 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0684231 Jy ! Component: 100 - total flux cleaned = 0.0922127 Jy ! Component: 150 - total flux cleaned = 0.106522 Jy ! Component: 200 - total flux cleaned = 0.117065 Jy ! Total flux subtracted in 200 components = 0.117065 Jy ! Clean residual min=-0.009095 max=0.008297 Jy/beam ! Clean residual mean=-0.000023 rms=0.002223 Jy/beam ! Combined flux in latest and established models = 0.117065 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 33 model components to the UV plane model. ! The established model now contains 33 components and 0.117065 Jy ! Inverting map and beam ! Estimated beam: bmin=3.862 mas, bmaj=12.35 mas, bpa=-2.484 degrees ! Estimated noise=1637.04 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-2.5, -4). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0122061 Jy ! Component: 100 - total flux cleaned = 0.0193582 Jy ! Component: 150 - total flux cleaned = 0.0244002 Jy ! Component: 200 - total flux cleaned = 0.0267387 Jy ! Total flux subtracted in 200 components = 0.0267387 Jy ! Clean residual min=-0.004689 max=0.003771 Jy/beam ! Clean residual mean=-0.000029 rms=0.001063 Jy/beam ! Combined flux in latest and established models = 0.143804 Jy ! Adding 53 model components to the UV plane model. ! The established model now contains 80 components and 0.143804 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=9.75 mas, bmaj=33.12 mas, bpa=-5.627 degrees ! Estimated noise=1829.99 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00261552 Jy ! Component: 100 - total flux cleaned = 0.00294824 Jy ! Component: 150 - total flux cleaned = 0.0030204 Jy ! Component: 200 - total flux cleaned = 0.00301863 Jy ! Total flux subtracted in 200 components = 0.00301863 Jy ! Clean residual min=-0.003650 max=0.002851 Jy/beam ! Clean residual mean=-0.000020 rms=0.001007 Jy/beam ! Combined flux in latest and established models = 0.146823 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 6.22494e-05 Jy ! Component: 100 - total flux cleaned = 6.24552e-05 Jy ! Component: 150 - total flux cleaned = 0.000113152 Jy ! Component: 200 - total flux cleaned = 0.00011183 Jy ! Total flux subtracted in 200 components = 0.00011183 Jy ! Clean residual min=-0.003647 max=0.002758 Jy/beam ! Clean residual mean=-0.000014 rms=0.000964 Jy/beam ! Combined flux in latest and established models = 0.146935 Jy ! Adding 29 model components to the UV plane model. ! The established model now contains 107 components and 0.146935 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.862 mas, bmaj=12.35 mas, bpa=-2.484 degrees ! Estimated noise=1637.04 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -9.26025e-05 Jy ! Component: 100 - total flux cleaned = -0.000183431 Jy ! Component: 150 - total flux cleaned = -0.000349486 Jy ! Component: 200 - total flux cleaned = -0.000500177 Jy ! Total flux subtracted in 200 components = -0.000500177 Jy ! Clean residual min=-0.004057 max=0.003528 Jy/beam ! Clean residual mean=-0.000008 rms=0.000863 Jy/beam ! Combined flux in latest and established models = 0.146435 Jy selfcal ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 126 components and 0.146434 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.152045Jy sigma=0.000624 ! Fit after self-cal, rms=0.152018Jy sigma=0.000624 wmodel J0853-3824_S_2017_05_27_pus_map.mod ! Writing 126 model components to file: J0853-3824_S_2017_05_27_pus_map.mod wobs J0853-3824_S_2017_05_27_pus_uvs.fits ! Writing UV FITS file: J0853-3824_S_2017_05_27_pus_uvs.fits wwins J0853-3824_S_2017_05_27_pus_map.win ! wwins: Wrote 4 windows to J0853-3824_S_2017_05_27_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000709935 Jy ! Component: 100 - total flux cleaned = -0.00173724 Jy ! Component: 150 - total flux cleaned = -0.00267756 Jy ! Component: 200 - total flux cleaned = -0.00331096 Jy ! Component: 250 - total flux cleaned = -0.00381638 Jy ! Component: 300 - total flux cleaned = -0.00416902 Jy ! Component: 350 - total flux cleaned = -0.00450763 Jy ! Component: 400 - total flux cleaned = -0.0047118 Jy ! Component: 450 - total flux cleaned = -0.00487168 Jy ! Component: 500 - total flux cleaned = -0.00490974 Jy ! Component: 550 - total flux cleaned = -0.00502361 Jy ! Component: 600 - total flux cleaned = -0.00513433 Jy ! Component: 650 - total flux cleaned = -0.0052056 Jy ! Component: 700 - total flux cleaned = -0.00527681 Jy ! Component: 750 - total flux cleaned = -0.00531136 Jy ! Component: 800 - total flux cleaned = -0.00527651 Jy ! Component: 850 - total flux cleaned = -0.00531058 Jy ! Component: 900 - total flux cleaned = -0.00531094 Jy ! Component: 950 - total flux cleaned = -0.00534395 Jy ! Component: 1000 - total flux cleaned = -0.00521577 Jy ! Component: 1050 - total flux cleaned = -0.00534344 Jy ! Component: 1100 - total flux cleaned = -0.00531173 Jy ! Component: 1150 - total flux cleaned = -0.00537319 Jy ! Component: 1200 - total flux cleaned = -0.005343 Jy ! Component: 1250 - total flux cleaned = -0.00540268 Jy ! Component: 1300 - total flux cleaned = -0.00537314 Jy ! Component: 1350 - total flux cleaned = -0.00531496 Jy ! Component: 1400 - total flux cleaned = -0.00531513 Jy ! Component: 1450 - total flux cleaned = -0.0052298 Jy ! Component: 1500 - total flux cleaned = -0.00531434 Jy ! Component: 1550 - total flux cleaned = -0.00531415 Jy ! Component: 1600 - total flux cleaned = -0.00525901 Jy ! Component: 1650 - total flux cleaned = -0.00520486 Jy ! Component: 1700 - total flux cleaned = -0.00523152 Jy ! Component: 1750 - total flux cleaned = -0.00520495 Jy ! Component: 1800 - total flux cleaned = -0.00528342 Jy ! Component: 1850 - total flux cleaned = -0.00528337 Jy ! Component: 1900 - total flux cleaned = -0.0052577 Jy ! Component: 1950 - total flux cleaned = -0.00530856 Jy ! Component: 2000 - total flux cleaned = -0.0053084 Jy ! Component: 2050 - total flux cleaned = -0.00530858 Jy ! Component: 2100 - total flux cleaned = -0.00535828 Jy ! Component: 2150 - total flux cleaned = -0.00543158 Jy ! Component: 2200 - total flux cleaned = -0.00540706 Jy ! Component: 2250 - total flux cleaned = -0.00540702 Jy ! Component: 2300 - total flux cleaned = -0.00543087 Jy ! Component: 2350 - total flux cleaned = -0.00547824 Jy ! Component: 2400 - total flux cleaned = -0.00545498 Jy ! Component: 2450 - total flux cleaned = -0.0055717 Jy ! Component: 2500 - total flux cleaned = -0.00566411 Jy ! Component: 2550 - total flux cleaned = -0.0057785 Jy ! Component: 2600 - total flux cleaned = -0.00580117 Jy ! Component: 2650 - total flux cleaned = -0.00586893 Jy ! Component: 2700 - total flux cleaned = -0.00593605 Jy ! Component: 2750 - total flux cleaned = -0.00602482 Jy ! Component: 2800 - total flux cleaned = -0.00606904 Jy ! Component: 2850 - total flux cleaned = -0.00613475 Jy ! Component: 2900 - total flux cleaned = -0.00622168 Jy ! Component: 2950 - total flux cleaned = -0.00628645 Jy ! Component: 3000 - total flux cleaned = -0.00635099 Jy ! Component: 3050 - total flux cleaned = -0.00635117 Jy ! Component: 3100 - total flux cleaned = -0.00643583 Jy ! Component: 3150 - total flux cleaned = -0.00647784 Jy ! Component: 3200 - total flux cleaned = -0.00651937 Jy ! Component: 3250 - total flux cleaned = -0.00654 Jy ! Component: 3300 - total flux cleaned = -0.00658107 Jy ! Component: 3350 - total flux cleaned = -0.00653996 Jy ! Component: 3400 - total flux cleaned = -0.00658077 Jy ! Component: 3450 - total flux cleaned = -0.00658075 Jy ! Component: 3500 - total flux cleaned = -0.00660094 Jy ! Component: 3550 - total flux cleaned = -0.00666107 Jy ! Component: 3600 - total flux cleaned = -0.00670095 Jy ! Component: 3650 - total flux cleaned = -0.00677998 Jy ! Component: 3700 - total flux cleaned = -0.00689804 Jy ! Component: 3750 - total flux cleaned = -0.00701537 Jy ! Component: 3800 - total flux cleaned = -0.00709324 Jy ! Component: 3850 - total flux cleaned = -0.00717055 Jy ! Component: 3900 - total flux cleaned = -0.00722836 Jy ! Component: 3950 - total flux cleaned = -0.00728611 Jy ! Component: 4000 - total flux cleaned = -0.00745801 Jy ! Component: 4050 - total flux cleaned = -0.00751498 Jy ! Total flux subtracted in 4096 components = -0.00759061 Jy ! Clean residual min=-0.001139 max=0.000946 Jy/beam ! Clean residual mean=0.000000 rms=0.000352 Jy/beam ! Combined flux in latest and established models = 0.138844 Jy keep ! Adding 213 model components to the UV plane model. ! The established model now contains 339 components and 0.138844 Jy ![Exited script file: muppet] wmap "J0853-3824_S_2017_05_27_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.862 x 12.35 at -2.484 degrees (North through East) ! Clean map min=-0.0037248 max=0.094723 Jy/beam ! Writing clean map to FITS file: J0853-3824_S_2017_05_27_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.094723 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000343234 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -1.08707 1.08707 2.17413 4.34827 8.69653 17.3931 34.7861 69.5722 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.001 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.094 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.862 x 12.35 at -2.484 degrees (North through East) ! Clean map min=-0.0037248 max=0.094723 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J0853-3824_S_2017_05_27_pus_uvs.log closed on Fri May 3 11:02:46 2019