! Started logfile: J0850-3039_S_2017_05_27_pus_uvs.log on Fri May 3 11:02:26 2019 obs J0850-3039_S_2017_05_27_pus_uva.fits ! Reading UV FITS file: J0850-3039_S_2017_05_27_pus_uva.fits ! AN table 1: 115 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.70628 visibilities/baseline/integration-bin. ! Found source: J0850-3039 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 1211 lines of history. ! ! Reading 14620 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J0850-3039_S_2017_05_27_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 196 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 268 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 209 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 700 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.977508Jy sigma=0.009156 ! Fit after self-cal, rms=0.925495Jy sigma=0.008999 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.011 mas, bmaj=9.387 mas, bpa=0.3221 degrees ! Estimated noise=1505.63 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0408094 Jy ! Component: 100 - total flux cleaned = 0.0533141 Jy ! Total flux subtracted in 100 components = 0.0533141 Jy ! Clean residual min=-0.015393 max=0.021246 Jy/beam ! Clean residual mean=0.000010 rms=0.007516 Jy/beam ! Combined flux in latest and established models = 0.0533141 Jy ! Performing phase self-cal ! Adding 4 model components to the UV plane model. ! The established model now contains 4 components and 0.0533141 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.186742Jy sigma=0.000767 ! Fit after self-cal, rms=0.186557Jy sigma=0.000756 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.619 mas, bmaj=11.04 mas, bpa=-0.4693 degrees ! Estimated noise=1127.91 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0299157 Jy ! Component: 100 - total flux cleaned = 0.0419367 Jy ! Component: 150 - total flux cleaned = 0.0479403 Jy ! Component: 200 - total flux cleaned = 0.0510033 Jy ! Total flux subtracted in 200 components = 0.0510033 Jy ! Clean residual min=-0.005612 max=0.007713 Jy/beam ! Clean residual mean=0.000068 rms=0.001904 Jy/beam ! Combined flux in latest and established models = 0.104317 Jy ! Performing phase self-cal ! Adding 47 model components to the UV plane model. ! The established model now contains 48 components and 0.104317 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.180399Jy sigma=0.000851 ! Fit after self-cal, rms=0.180336Jy sigma=0.000850 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.54 FD 0.89 HN 1.15 KP 0.98 ! LA 0.99 MK 1.21 NL 0.94 OV 0.97 ! PT 1.04 SC 0.98 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.88 HN 1.12 KP 0.93 ! LA 0.87 MK 1.28 NL 1.12 OV 1.05 ! PT 0.93 SC 1.02 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 12.97 FD 0.97 HN 1.06 KP 0.94 ! LA 0.94 MK 1.21 NL 1.05 OV 0.97 ! PT 0.98 SC 1.01 ! ! ! Correcting IF 4. ! A total of 51 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.01 HN 0.94 KP 1.00* ! LA 0.92 MK 0.94 NL 1.00* OV 1.00* ! PT 0.93 SC 1.00* ! ! ! Fit before self-cal, rms=0.180336Jy sigma=0.000850 ! Fit after self-cal, rms=1.179979Jy sigma=0.000651 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.683 mas, bmaj=11.3 mas, bpa=0.04378 degrees ! Estimated noise=1190.35 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00214663 Jy ! Component: 100 - total flux cleaned = 0.00214716 Jy ! Component: 150 - total flux cleaned = 0.00223308 Jy ! Component: 200 - total flux cleaned = 0.00237904 Jy ! Total flux subtracted in 200 components = 0.00237904 Jy ! Clean residual min=-0.003340 max=0.003267 Jy/beam ! Clean residual mean=0.000000 rms=0.000915 Jy/beam ! Combined flux in latest and established models = 0.106696 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 55 components and 0.106696 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=1.179863Jy sigma=0.000650 ! Fit after self-cal, rms=1.180194Jy sigma=0.000645 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=1.180194Jy sigma=0.000645 ! Fit after self-cal, rms=0.243833Jy sigma=0.000643 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.696 mas, bmaj=11.48 mas, bpa=-0.5892 degrees ! Estimated noise=1184.49 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00160763 Jy ! Component: 100 - total flux cleaned = 0.00165642 Jy ! Component: 150 - total flux cleaned = 0.00169936 Jy ! Component: 200 - total flux cleaned = 0.00170057 Jy ! Total flux subtracted in 200 components = 0.00170057 Jy ! Clean residual min=-0.003058 max=0.003132 Jy/beam ! Clean residual mean=-0.000011 rms=0.000776 Jy/beam ! Combined flux in latest and established models = 0.108397 Jy selfcal ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 58 components and 0.108397 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.243760Jy sigma=0.000643 ! Fit after self-cal, rms=0.243758Jy sigma=0.000643 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000184377 Jy ! Component: 100 - total flux cleaned = 0.000226853 Jy ! Component: 150 - total flux cleaned = 0.000226931 Jy ! Component: 200 - total flux cleaned = 0.000261396 Jy ! Total flux subtracted in 200 components = 0.000261396 Jy ! Clean residual min=-0.002994 max=0.003087 Jy/beam ! Clean residual mean=-0.000011 rms=0.000782 Jy/beam ! Combined flux in latest and established models = 0.108658 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 59 components and 0.108658 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.243720Jy sigma=0.000643 ! Fit after self-cal, rms=0.243699Jy sigma=0.000643 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.243699Jy sigma=0.000643 ! Fit after self-cal, rms=0.270055Jy sigma=0.000643 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.66 mas, bmaj=11.43 mas, bpa=-1.208 degrees ! Estimated noise=1183.48 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00154935 Jy ! Component: 100 - total flux cleaned = 0.00164317 Jy ! Component: 150 - total flux cleaned = 0.00168152 Jy ! Component: 200 - total flux cleaned = 0.00168134 Jy ! Total flux subtracted in 200 components = 0.00168134 Jy ! Clean residual min=-0.002950 max=0.003001 Jy/beam ! Clean residual mean=-0.000012 rms=0.000770 Jy/beam ! Combined flux in latest and established models = 0.11034 Jy selfcal ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 59 components and 0.11034 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.269984Jy sigma=0.000643 ! Fit after self-cal, rms=0.269962Jy sigma=0.000642 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000104049 Jy ! Component: 100 - total flux cleaned = 0.000102743 Jy ! Component: 150 - total flux cleaned = 0.000101681 Jy ! Component: 200 - total flux cleaned = 0.000101941 Jy ! Total flux subtracted in 200 components = 0.000101941 Jy ! Clean residual min=-0.002978 max=0.003009 Jy/beam ! Clean residual mean=-0.000012 rms=0.000774 Jy/beam ! Combined flux in latest and established models = 0.110442 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 62 components and 0.110442 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.269933Jy sigma=0.000642 ! Fit after self-cal, rms=0.269936Jy sigma=0.000642 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.269936Jy sigma=0.000642 ! Fit after self-cal, rms=0.277676Jy sigma=0.000642 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.614 mas, bmaj=25.32 mas, bpa=-3.363 degrees ! Estimated noise=1375.98 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0013879 Jy ! Component: 100 - total flux cleaned = 0.00146444 Jy ! Component: 150 - total flux cleaned = 0.00149768 Jy ! Component: 200 - total flux cleaned = 0.00150088 Jy ! Total flux subtracted in 200 components = 0.00150088 Jy ! Clean residual min=-0.002721 max=0.002638 Jy/beam ! Clean residual mean=-0.000021 rms=0.000857 Jy/beam ! Combined flux in latest and established models = 0.111943 Jy selfcal ! Performing phase self-cal ! Adding 6 model components to the UV plane model. ! The established model now contains 62 components and 0.111943 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.277604Jy sigma=0.000642 ! Fit after self-cal, rms=0.277574Jy sigma=0.000642 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 3.38657e-05 Jy ! Component: 100 - total flux cleaned = 3.17645e-05 Jy ! Component: 150 - total flux cleaned = 3.33368e-05 Jy ! Component: 200 - total flux cleaned = 6.52816e-05 Jy ! Total flux subtracted in 200 components = 6.52816e-05 Jy ! Clean residual min=-0.002726 max=0.002615 Jy/beam ! Clean residual mean=-0.000021 rms=0.000856 Jy/beam ! Combined flux in latest and established models = 0.112008 Jy ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 62 components and 0.112008 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.277540Jy sigma=0.000642 ! Fit after self-cal, rms=0.277539Jy sigma=0.000642 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.622 mas, bmaj=11.36 mas, bpa=-1.755 degrees ! Estimated noise=1181.73 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.622 x 11.36 at -1.755 degrees (North through East) ! Clean map min=-0.0030132 max=0.074323 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.625 mas, bmaj=8.856 mas, bpa=-1.624 degrees ! Estimated noise=2178.79 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0602206 Jy ! Component: 100 - total flux cleaned = 0.0805736 Jy ! Component: 150 - total flux cleaned = 0.0927829 Jy ! Component: 200 - total flux cleaned = 0.100274 Jy ! Total flux subtracted in 200 components = 0.100274 Jy ! Clean residual min=-0.005323 max=0.005882 Jy/beam ! Clean residual mean=-0.000019 rms=0.001397 Jy/beam ! Combined flux in latest and established models = 0.100274 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 20 model components to the UV plane model. ! The established model now contains 20 components and 0.100274 Jy ! Inverting map and beam ! Estimated beam: bmin=3.622 mas, bmaj=11.36 mas, bpa=-1.755 degrees ! Estimated noise=1181.73 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (3.5, 0). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00601336 Jy ! Component: 100 - total flux cleaned = 0.00882789 Jy ! Component: 150 - total flux cleaned = 0.0095851 Jy ! Component: 200 - total flux cleaned = 0.00979403 Jy ! Total flux subtracted in 200 components = 0.00979403 Jy ! Clean residual min=-0.003242 max=0.002879 Jy/beam ! Clean residual mean=-0.000016 rms=0.000758 Jy/beam ! Combined flux in latest and established models = 0.110068 Jy ! Adding 33 model components to the UV plane model. ! The established model now contains 51 components and 0.110068 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.614 mas, bmaj=25.32 mas, bpa=-3.363 degrees ! Estimated noise=1375.98 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000814027 Jy ! Component: 100 - total flux cleaned = 0.000846719 Jy ! Component: 150 - total flux cleaned = 0.000821216 Jy ! Component: 200 - total flux cleaned = 0.00077514 Jy ! Total flux subtracted in 200 components = 0.00077514 Jy ! Clean residual min=-0.002690 max=0.002515 Jy/beam ! Clean residual mean=-0.000026 rms=0.000837 Jy/beam ! Combined flux in latest and established models = 0.110843 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -4.32679e-05 Jy ! Component: 100 - total flux cleaned = -8.44035e-05 Jy ! Component: 150 - total flux cleaned = -0.000103834 Jy ! Component: 200 - total flux cleaned = -0.000141609 Jy ! Total flux subtracted in 200 components = -0.000141609 Jy ! Clean residual min=-0.002689 max=0.002472 Jy/beam ! Clean residual mean=-0.000027 rms=0.000838 Jy/beam ! Combined flux in latest and established models = 0.110701 Jy ! Adding 19 model components to the UV plane model. ! The established model now contains 70 components and 0.110702 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.622 mas, bmaj=11.36 mas, bpa=-1.755 degrees ! Estimated noise=1181.73 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000207074 Jy ! Component: 100 - total flux cleaned = -0.000207215 Jy ! Component: 150 - total flux cleaned = -0.000178865 Jy ! Component: 200 - total flux cleaned = -0.000205639 Jy ! Total flux subtracted in 200 components = -0.000205639 Jy ! Clean residual min=-0.003220 max=0.002829 Jy/beam ! Clean residual mean=-0.000017 rms=0.000750 Jy/beam ! Combined flux in latest and established models = 0.110496 Jy selfcal ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 83 components and 0.110496 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.277241Jy sigma=0.000642 ! Fit after self-cal, rms=0.277167Jy sigma=0.000642 wmodel J0850-3039_S_2017_05_27_pus_map.mod ! Writing 83 model components to file: J0850-3039_S_2017_05_27_pus_map.mod wobs J0850-3039_S_2017_05_27_pus_uvs.fits ! Writing UV FITS file: J0850-3039_S_2017_05_27_pus_uvs.fits wwins J0850-3039_S_2017_05_27_pus_map.win ! wwins: Wrote 2 windows to J0850-3039_S_2017_05_27_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000637453 Jy ! Component: 100 - total flux cleaned = -0.00143211 Jy ! Component: 150 - total flux cleaned = -0.00202907 Jy ! Component: 200 - total flux cleaned = -0.00233426 Jy ! Component: 250 - total flux cleaned = -0.00262819 Jy ! Component: 300 - total flux cleaned = -0.00295205 Jy ! Component: 350 - total flux cleaned = -0.00338383 Jy ! Component: 400 - total flux cleaned = -0.00376799 Jy ! Component: 450 - total flux cleaned = -0.00421901 Jy ! Component: 500 - total flux cleaned = -0.0045139 Jy ! Component: 550 - total flux cleaned = -0.00494847 Jy ! Component: 600 - total flux cleaned = -0.0052685 Jy ! Component: 650 - total flux cleaned = -0.00561702 Jy ! Component: 700 - total flux cleaned = -0.00589037 Jy ! Component: 750 - total flux cleaned = -0.00622652 Jy ! Component: 800 - total flux cleaned = -0.00655694 Jy ! Component: 850 - total flux cleaned = -0.0068817 Jy ! Component: 900 - total flux cleaned = -0.00726558 Jy ! Component: 950 - total flux cleaned = -0.00751681 Jy ! Component: 1000 - total flux cleaned = -0.00770222 Jy ! Component: 1050 - total flux cleaned = -0.00788526 Jy ! Component: 1100 - total flux cleaned = -0.00800616 Jy ! Component: 1150 - total flux cleaned = -0.00818395 Jy ! Component: 1200 - total flux cleaned = -0.00838897 Jy ! Component: 1250 - total flux cleaned = -0.00850535 Jy ! Component: 1300 - total flux cleaned = -0.00876376 Jy ! Component: 1350 - total flux cleaned = -0.0089628 Jy ! Component: 1400 - total flux cleaned = -0.00904768 Jy ! Component: 1450 - total flux cleaned = -0.00935416 Jy ! Component: 1500 - total flux cleaned = -0.00960217 Jy ! Component: 1550 - total flux cleaned = -0.00987496 Jy ! Component: 1600 - total flux cleaned = -0.0101183 Jy ! Component: 1650 - total flux cleaned = -0.0102791 Jy ! Component: 1700 - total flux cleaned = -0.0105454 Jy ! Component: 1750 - total flux cleaned = -0.0107824 Jy ! Component: 1800 - total flux cleaned = -0.0109655 Jy ! Component: 1850 - total flux cleaned = -0.0111731 Jy ! Component: 1900 - total flux cleaned = -0.0113532 Jy ! Component: 1950 - total flux cleaned = -0.0115319 Jy ! Component: 2000 - total flux cleaned = -0.0116585 Jy ! Component: 2050 - total flux cleaned = -0.0119851 Jy ! Component: 2100 - total flux cleaned = -0.0121344 Jy ! Component: 2150 - total flux cleaned = -0.0122828 Jy ! Component: 2200 - total flux cleaned = -0.0125279 Jy ! Component: 2250 - total flux cleaned = -0.0126006 Jy ! Component: 2300 - total flux cleaned = -0.0127213 Jy ! Component: 2350 - total flux cleaned = -0.0128893 Jy ! Component: 2400 - total flux cleaned = -0.0131034 Jy ! Component: 2450 - total flux cleaned = -0.0133161 Jy ! Component: 2500 - total flux cleaned = -0.0134569 Jy ! Component: 2550 - total flux cleaned = -0.0136669 Jy ! Component: 2600 - total flux cleaned = -0.0137828 Jy ! Component: 2650 - total flux cleaned = -0.0140132 Jy ! Component: 2700 - total flux cleaned = -0.014242 Jy ! Component: 2750 - total flux cleaned = -0.014424 Jy ! Component: 2800 - total flux cleaned = -0.0145369 Jy ! Component: 2850 - total flux cleaned = -0.014739 Jy ! Component: 2900 - total flux cleaned = -0.0148952 Jy ! Component: 2950 - total flux cleaned = -0.015006 Jy ! Component: 3000 - total flux cleaned = -0.0152267 Jy ! Component: 3050 - total flux cleaned = -0.0153582 Jy ! Component: 3100 - total flux cleaned = -0.015511 Jy ! Component: 3150 - total flux cleaned = -0.015663 Jy ! Component: 3200 - total flux cleaned = -0.0157925 Jy ! Component: 3250 - total flux cleaned = -0.016007 Jy ! Component: 3300 - total flux cleaned = -0.0160498 Jy ! Component: 3350 - total flux cleaned = -0.0161987 Jy ! Component: 3400 - total flux cleaned = -0.0163888 Jy ! Component: 3450 - total flux cleaned = -0.016473 Jy ! Component: 3500 - total flux cleaned = -0.0166615 Jy ! Component: 3550 - total flux cleaned = -0.0168491 Jy ! Component: 3600 - total flux cleaned = -0.0169942 Jy ! Component: 3650 - total flux cleaned = -0.0172008 Jy ! Component: 3700 - total flux cleaned = -0.017283 Jy ! Component: 3750 - total flux cleaned = -0.017467 Jy ! Component: 3800 - total flux cleaned = -0.0175894 Jy ! Component: 3850 - total flux cleaned = -0.0177112 Jy ! Component: 3900 - total flux cleaned = -0.0178731 Jy ! Component: 3950 - total flux cleaned = -0.0180949 Jy ! Component: 4000 - total flux cleaned = -0.0182556 Jy ! Component: 4050 - total flux cleaned = -0.0183756 Jy ! Total flux subtracted in 4096 components = -0.0185352 Jy ! Clean residual min=-0.001056 max=0.001132 Jy/beam ! Clean residual mean=-0.000017 rms=0.000384 Jy/beam ! Combined flux in latest and established models = 0.0919607 Jy keep ! Adding 267 model components to the UV plane model. ! The established model now contains 350 components and 0.0919607 Jy ![Exited script file: muppet] wmap "J0850-3039_S_2017_05_27_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.622 x 11.36 at -1.755 degrees (North through East) ! Clean map min=-0.0026503 max=0.079623 Jy/beam ! Writing clean map to FITS file: J0850-3039_S_2017_05_27_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.079623 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000378923 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -1.42769 1.42769 2.85538 5.71075 11.4215 22.843 45.686 91.372 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0011 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.079 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.622 x 11.36 at -1.755 degrees (North through East) ! Clean map min=-0.0026503 max=0.079623 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J0850-3039_S_2017_05_27_pus_uvs.log closed on Fri May 3 11:02:33 2019