! Started logfile: J0849-3541_S_2017_05_27_pus_uvs.log on Fri May 3 11:02:21 2019 obs J0849-3541_S_2017_05_27_pus_uva.fits ! Reading UV FITS file: J0849-3541_S_2017_05_27_pus_uva.fits ! AN table 1: 115 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.610435 visibilities/baseline/integration-bin. ! Found source: J0849-3541 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 1211 lines of history. ! ! Reading 12636 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J0849-3541_S_2017_05_27_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 240 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 240 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 240 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 701 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.861536Jy sigma=0.004581 ! Fit after self-cal, rms=0.833474Jy sigma=0.004443 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.683 mas, bmaj=8.509 mas, bpa=-2.236 degrees ! Estimated noise=2414.25 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.124194 Jy ! Component: 100 - total flux cleaned = 0.16936 Jy ! Total flux subtracted in 100 components = 0.16936 Jy ! Clean residual min=-0.012781 max=0.023337 Jy/beam ! Clean residual mean=-0.000196 rms=0.004348 Jy/beam ! Combined flux in latest and established models = 0.16936 Jy ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 28 components and 0.16936 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.154902Jy sigma=0.000766 ! Fit after self-cal, rms=0.154773Jy sigma=0.000765 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.239 mas, bmaj=10.1 mas, bpa=-1.606 degrees ! Estimated noise=1333.41 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (2.5, -1.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0464037 Jy ! Component: 100 - total flux cleaned = 0.0712343 Jy ! Component: 150 - total flux cleaned = 0.0860994 Jy ! Component: 200 - total flux cleaned = 0.095474 Jy ! Total flux subtracted in 200 components = 0.095474 Jy ! Clean residual min=-0.008582 max=0.009986 Jy/beam ! Clean residual mean=-0.000418 rms=0.003000 Jy/beam ! Combined flux in latest and established models = 0.264834 Jy ! Performing phase self-cal ! Adding 103 model components to the UV plane model. ! The established model now contains 127 components and 0.264834 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.142392Jy sigma=0.000672 ! Fit after self-cal, rms=0.142070Jy sigma=0.000670 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.96 HN 1.05 KP 1.01 ! LA 0.93 MK 1.09 NL 1.07 OV 0.98 ! PT 1.02 SC 0.97 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.96 HN 1.05 KP 1.00 ! LA 0.89 MK 0.99 NL 1.18 OV 0.98 ! PT 1.01 SC 1.07 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.02 HN 1.18 KP 0.95 ! LA 0.92 MK 0.97 NL 1.20 OV 0.91 ! PT 0.97 SC 1.03 ! ! ! Correcting IF 4. ! A total of 9 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.07 HN 0.94 KP 1.00* ! LA 0.87 MK 0.98 NL 1.00* OV 1.00* ! PT 1.02 SC 1.00* ! ! ! Fit before self-cal, rms=0.142070Jy sigma=0.000670 ! Fit after self-cal, rms=0.147848Jy sigma=0.000663 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.269 mas, bmaj=10.18 mas, bpa=-1.619 degrees ! Estimated noise=1323.98 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00117991 Jy ! Component: 100 - total flux cleaned = 0.00127782 Jy ! Component: 150 - total flux cleaned = 0.00143925 Jy ! Component: 200 - total flux cleaned = 0.00151232 Jy ! Total flux subtracted in 200 components = 0.00151232 Jy ! Clean residual min=-0.007320 max=0.011297 Jy/beam ! Clean residual mean=-0.000233 rms=0.002252 Jy/beam ! Combined flux in latest and established models = 0.266346 Jy ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 143 components and 0.266346 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.147726Jy sigma=0.000662 ! Fit after self-cal, rms=0.147951Jy sigma=0.000662 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.147951Jy sigma=0.000662 ! Fit after self-cal, rms=0.147473Jy sigma=0.000659 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.265 mas, bmaj=10.16 mas, bpa=-1.601 degrees ! Estimated noise=1319.8 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000961996 Jy ! Component: 100 - total flux cleaned = 0.0010912 Jy ! Component: 150 - total flux cleaned = 0.0011415 Jy ! Component: 200 - total flux cleaned = 0.00114005 Jy ! Total flux subtracted in 200 components = 0.00114005 Jy ! Clean residual min=-0.005925 max=0.009453 Jy/beam ! Clean residual mean=-0.000160 rms=0.001876 Jy/beam ! Combined flux in latest and established models = 0.267486 Jy selfcal ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 150 components and 0.267487 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.147407Jy sigma=0.000658 ! Fit after self-cal, rms=0.147427Jy sigma=0.000658 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (35, -21.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00819638 Jy ! Component: 100 - total flux cleaned = 0.0118838 Jy ! Component: 150 - total flux cleaned = 0.0141997 Jy ! Component: 200 - total flux cleaned = 0.0159253 Jy ! Total flux subtracted in 200 components = 0.0159253 Jy ! Clean residual min=-0.004845 max=0.005518 Jy/beam ! Clean residual mean=-0.000074 rms=0.001389 Jy/beam ! Combined flux in latest and established models = 0.283412 Jy ! Performing phase self-cal ! Adding 40 model components to the UV plane model. ! The established model now contains 187 components and 0.283412 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.147022Jy sigma=0.000655 ! Fit after self-cal, rms=0.146887Jy sigma=0.000655 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.146887Jy sigma=0.000655 ! Fit after self-cal, rms=0.147270Jy sigma=0.000654 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.269 mas, bmaj=10.16 mas, bpa=-1.544 degrees ! Estimated noise=1319.88 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00366482 Jy ! Component: 100 - total flux cleaned = 0.00518567 Jy ! Component: 150 - total flux cleaned = 0.00563553 Jy ! Component: 200 - total flux cleaned = 0.00578288 Jy ! Total flux subtracted in 200 components = 0.00578288 Jy ! Clean residual min=-0.004648 max=0.004769 Jy/beam ! Clean residual mean=-0.000053 rms=0.001214 Jy/beam ! Combined flux in latest and established models = 0.289195 Jy selfcal ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 200 components and 0.289195 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.147171Jy sigma=0.000654 ! Fit after self-cal, rms=0.147147Jy sigma=0.000654 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00119479 Jy ! Component: 100 - total flux cleaned = 0.00147832 Jy ! Component: 150 - total flux cleaned = 0.00160804 Jy ! Component: 200 - total flux cleaned = 0.00176941 Jy ! Total flux subtracted in 200 components = 0.00176941 Jy ! Clean residual min=-0.004628 max=0.004721 Jy/beam ! Clean residual mean=-0.000044 rms=0.001196 Jy/beam ! Combined flux in latest and established models = 0.290964 Jy ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 209 components and 0.290964 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.147115Jy sigma=0.000654 ! Fit after self-cal, rms=0.147113Jy sigma=0.000654 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.147113Jy sigma=0.000654 ! Fit after self-cal, rms=0.147240Jy sigma=0.000653 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.794 mas, bmaj=26.84 mas, bpa=-4.065 degrees ! Estimated noise=1590.39 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00231576 Jy ! Component: 100 - total flux cleaned = 0.00264463 Jy ! Component: 150 - total flux cleaned = 0.00274827 Jy ! Component: 200 - total flux cleaned = 0.00288546 Jy ! Total flux subtracted in 200 components = 0.00288546 Jy ! Clean residual min=-0.005969 max=0.005649 Jy/beam ! Clean residual mean=-0.000063 rms=0.001585 Jy/beam ! Combined flux in latest and established models = 0.29385 Jy selfcal ! Performing phase self-cal ! Adding 47 model components to the UV plane model. ! The established model now contains 244 components and 0.29385 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.147234Jy sigma=0.000653 ! Fit after self-cal, rms=0.147248Jy sigma=0.000653 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000759285 Jy ! Component: 100 - total flux cleaned = 0.000899285 Jy ! Component: 150 - total flux cleaned = 0.000979375 Jy ! Component: 200 - total flux cleaned = 0.00104998 Jy ! Total flux subtracted in 200 components = 0.00104998 Jy ! Clean residual min=-0.005816 max=0.005470 Jy/beam ! Clean residual mean=-0.000049 rms=0.001568 Jy/beam ! Combined flux in latest and established models = 0.2949 Jy ! Performing phase self-cal ! Adding 33 model components to the UV plane model. ! The established model now contains 251 components and 0.2949 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.147249Jy sigma=0.000653 ! Fit after self-cal, rms=0.147256Jy sigma=0.000653 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.275 mas, bmaj=10.18 mas, bpa=-1.561 degrees ! Estimated noise=1320.31 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.275 x 10.18 at -1.561 degrees (North through East) ! Clean map min=-0.0042128 max=0.15862 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.695 mas, bmaj=8.518 mas, bpa=-2.053 degrees ! Estimated noise=2413.85 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.123031 Jy ! Component: 100 - total flux cleaned = 0.168622 Jy ! Component: 150 - total flux cleaned = 0.196781 Jy ! Component: 200 - total flux cleaned = 0.215266 Jy ! Total flux subtracted in 200 components = 0.215266 Jy ! Clean residual min=-0.008564 max=0.011486 Jy/beam ! Clean residual mean=-0.000120 rms=0.002745 Jy/beam ! Combined flux in latest and established models = 0.215266 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 51 model components to the UV plane model. ! The established model now contains 51 components and 0.215266 Jy ! Inverting map and beam ! Estimated beam: bmin=3.275 mas, bmaj=10.18 mas, bpa=-1.561 degrees ! Estimated noise=1320.31 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0216665 Jy ! Component: 100 - total flux cleaned = 0.0349045 Jy ! Component: 150 - total flux cleaned = 0.0443749 Jy ! Component: 200 - total flux cleaned = 0.05161 Jy ! Total flux subtracted in 200 components = 0.05161 Jy ! Clean residual min=-0.006146 max=0.007330 Jy/beam ! Clean residual mean=-0.000159 rms=0.001730 Jy/beam ! Combined flux in latest and established models = 0.266877 Jy ! Adding 79 model components to the UV plane model. ! The established model now contains 129 components and 0.266877 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.794 mas, bmaj=26.84 mas, bpa=-4.065 degrees ! Estimated noise=1590.39 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00913787 Jy ! Component: 100 - total flux cleaned = 0.0149382 Jy ! Component: 150 - total flux cleaned = 0.0187982 Jy ! Component: 200 - total flux cleaned = 0.0214135 Jy ! Total flux subtracted in 200 components = 0.0214135 Jy ! Clean residual min=-0.006235 max=0.006080 Jy/beam ! Clean residual mean=-0.000104 rms=0.001759 Jy/beam ! Combined flux in latest and established models = 0.28829 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00144283 Jy ! Component: 100 - total flux cleaned = 0.00176701 Jy ! Component: 150 - total flux cleaned = 0.00195453 Jy ! Component: 200 - total flux cleaned = 0.00219149 Jy ! Total flux subtracted in 200 components = 0.00219149 Jy ! Clean residual min=-0.006047 max=0.005714 Jy/beam ! Clean residual mean=-0.000083 rms=0.001689 Jy/beam ! Combined flux in latest and established models = 0.290482 Jy ! Adding 73 model components to the UV plane model. ! The established model now contains 187 components and 0.290482 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.275 mas, bmaj=10.18 mas, bpa=-1.561 degrees ! Estimated noise=1320.31 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000386025 Jy ! Component: 100 - total flux cleaned = -0.000140072 Jy ! Component: 150 - total flux cleaned = -0.000142085 Jy ! Component: 200 - total flux cleaned = -8.11148e-05 Jy ! Total flux subtracted in 200 components = -8.11148e-05 Jy ! Clean residual min=-0.004819 max=0.005094 Jy/beam ! Clean residual mean=-0.000047 rms=0.001224 Jy/beam ! Combined flux in latest and established models = 0.290401 Jy selfcal ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 205 components and 0.2904 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.147371Jy sigma=0.000654 ! Fit after self-cal, rms=0.147288Jy sigma=0.000654 wmodel J0849-3541_S_2017_05_27_pus_map.mod ! Writing 205 model components to file: J0849-3541_S_2017_05_27_pus_map.mod wobs J0849-3541_S_2017_05_27_pus_uvs.fits ! Writing UV FITS file: J0849-3541_S_2017_05_27_pus_uvs.fits wwins J0849-3541_S_2017_05_27_pus_map.win ! wwins: Wrote 3 windows to J0849-3541_S_2017_05_27_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.000354947 Jy ! Component: 100 - total flux cleaned = 0.000752119 Jy ! Component: 150 - total flux cleaned = 0.00118715 Jy ! Component: 200 - total flux cleaned = 0.00138857 Jy ! Component: 250 - total flux cleaned = 0.00144927 Jy ! Component: 300 - total flux cleaned = 0.00145282 Jy ! Component: 350 - total flux cleaned = 0.00128477 Jy ! Component: 400 - total flux cleaned = 0.00112398 Jy ! Component: 450 - total flux cleaned = 0.00117506 Jy ! Component: 500 - total flux cleaned = 0.00117317 Jy ! Component: 550 - total flux cleaned = 0.00112377 Jy ! Component: 600 - total flux cleaned = 0.00112409 Jy ! Component: 650 - total flux cleaned = 0.00108039 Jy ! Component: 700 - total flux cleaned = 0.000950172 Jy ! Component: 750 - total flux cleaned = 0.000823008 Jy ! Component: 800 - total flux cleaned = 0.000741199 Jy ! Component: 850 - total flux cleaned = 0.000700879 Jy ! Component: 900 - total flux cleaned = 0.000582493 Jy ! Component: 950 - total flux cleaned = 0.000583654 Jy ! Component: 1000 - total flux cleaned = 0.000471002 Jy ! Component: 1050 - total flux cleaned = 0.000471297 Jy ! Component: 1100 - total flux cleaned = 0.000435514 Jy ! Component: 1150 - total flux cleaned = 0.000364398 Jy ! Component: 1200 - total flux cleaned = 0.000226071 Jy ! Component: 1250 - total flux cleaned = 0.000124971 Jy ! Component: 1300 - total flux cleaned = 5.93631e-05 Jy ! Component: 1350 - total flux cleaned = 2.69401e-05 Jy ! Component: 1400 - total flux cleaned = -3.71487e-05 Jy ! Component: 1450 - total flux cleaned = -0.000162597 Jy ! Component: 1500 - total flux cleaned = -0.000285415 Jy ! Component: 1550 - total flux cleaned = -0.000314843 Jy ! Component: 1600 - total flux cleaned = -0.000373691 Jy ! Component: 1650 - total flux cleaned = -0.000402913 Jy ! Component: 1700 - total flux cleaned = -0.000545578 Jy ! Component: 1750 - total flux cleaned = -0.000545086 Jy ! Component: 1800 - total flux cleaned = -0.000600539 Jy ! Component: 1850 - total flux cleaned = -0.000682018 Jy ! Component: 1900 - total flux cleaned = -0.000708645 Jy ! Component: 1950 - total flux cleaned = -0.000840615 Jy ! Component: 2000 - total flux cleaned = -0.000892425 Jy ! Component: 2050 - total flux cleaned = -0.00086626 Jy ! Component: 2100 - total flux cleaned = -0.000968418 Jy ! Component: 2150 - total flux cleaned = -0.00114364 Jy ! Component: 2200 - total flux cleaned = -0.00116835 Jy ! Component: 2250 - total flux cleaned = -0.00121729 Jy ! Component: 2300 - total flux cleaned = -0.00124126 Jy ! Component: 2350 - total flux cleaned = -0.00128906 Jy ! Component: 2400 - total flux cleaned = -0.00138296 Jy ! Component: 2450 - total flux cleaned = -0.00142908 Jy ! Component: 2500 - total flux cleaned = -0.00149801 Jy ! Component: 2550 - total flux cleaned = -0.00147506 Jy ! Component: 2600 - total flux cleaned = -0.00156474 Jy ! Component: 2650 - total flux cleaned = -0.00158651 Jy ! Component: 2700 - total flux cleaned = -0.00158635 Jy ! Component: 2750 - total flux cleaned = -0.00160805 Jy ! Component: 2800 - total flux cleaned = -0.00167256 Jy ! Component: 2850 - total flux cleaned = -0.00165147 Jy ! Component: 2900 - total flux cleaned = -0.00175659 Jy ! Component: 2950 - total flux cleaned = -0.00173564 Jy ! Component: 3000 - total flux cleaned = -0.00179746 Jy ! Component: 3050 - total flux cleaned = -0.00185855 Jy ! Component: 3100 - total flux cleaned = -0.00179746 Jy ! Component: 3150 - total flux cleaned = -0.00185775 Jy ! Component: 3200 - total flux cleaned = -0.0018379 Jy ! Component: 3250 - total flux cleaned = -0.00193648 Jy ! Component: 3300 - total flux cleaned = -0.0019754 Jy ! Component: 3350 - total flux cleaned = -0.00193647 Jy ! Component: 3400 - total flux cleaned = -0.00191755 Jy ! Component: 3450 - total flux cleaned = -0.00199375 Jy ! Component: 3500 - total flux cleaned = -0.00203153 Jy ! Component: 3550 - total flux cleaned = -0.00205007 Jy ! Component: 3600 - total flux cleaned = -0.00205004 Jy ! Component: 3650 - total flux cleaned = -0.00204988 Jy ! Component: 3700 - total flux cleaned = -0.00206827 Jy ! Component: 3750 - total flux cleaned = -0.00212287 Jy ! Component: 3800 - total flux cleaned = -0.00221308 Jy ! Component: 3850 - total flux cleaned = -0.00226671 Jy ! Component: 3900 - total flux cleaned = -0.00228424 Jy ! Component: 3950 - total flux cleaned = -0.00228425 Jy ! Component: 4000 - total flux cleaned = -0.00238958 Jy ! Component: 4050 - total flux cleaned = -0.00249396 Jy ! Total flux subtracted in 4096 components = -0.0025631 Jy ! Clean residual min=-0.001065 max=0.000902 Jy/beam ! Clean residual mean=-0.000018 rms=0.000324 Jy/beam ! Combined flux in latest and established models = 0.287837 Jy keep ! Adding 291 model components to the UV plane model. ! The established model now contains 496 components and 0.287837 Jy ![Exited script file: muppet] wmap "J0849-3541_S_2017_05_27_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.275 x 10.18 at -1.561 degrees (North through East) ! Clean map min=-0.0025389 max=0.16408 Jy/beam ! Writing clean map to FITS file: J0849-3541_S_2017_05_27_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.164082 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000323553 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.591569 0.591569 1.18314 2.36627 4.73255 9.4651 18.9302 37.8604 75.7208 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0009 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.164 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.275 x 10.18 at -1.561 degrees (North through East) ! Clean map min=-0.0025389 max=0.16408 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J0849-3541_S_2017_05_27_pus_uvs.log closed on Fri May 3 11:02:26 2019