! Started logfile: J0846-2610_S_2017_05_27_pus_uvs.log on Fri May 3 11:02:08 2019 obs J0846-2610_S_2017_05_27_pus_uva.fits ! Reading UV FITS file: J0846-2610_S_2017_05_27_pus_uva.fits ! AN table 1: 155 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.892186 visibilities/baseline/integration-bin. ! Found source: J0846-2610 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 1211 lines of history. ! ! Reading 24892 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J0846-2610_S_2017_05_27_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 85 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 135 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 85 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 897 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.936174Jy sigma=0.012482 ! Fit after self-cal, rms=0.855038Jy sigma=0.012087 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.75 mas, bmaj=7.475 mas, bpa=-4.422 degrees ! Estimated noise=1299.74 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.12452 Jy ! Component: 100 - total flux cleaned = 0.197969 Jy ! Total flux subtracted in 100 components = 0.197969 Jy ! Clean residual min=-0.048270 max=0.059973 Jy/beam ! Clean residual mean=-0.000160 rms=0.016879 Jy/beam ! Combined flux in latest and established models = 0.197969 Jy ! Performing phase self-cal ! Adding 42 model components to the UV plane model. ! The established model now contains 42 components and 0.197969 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.411979Jy sigma=0.002984 ! Fit after self-cal, rms=0.411009Jy sigma=0.002980 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.535 mas, bmaj=9.034 mas, bpa=0.2741 degrees ! Estimated noise=755.232 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.129378 Jy ! Component: 100 - total flux cleaned = 0.198596 Jy ! Component: 150 - total flux cleaned = 0.237371 Jy ! Component: 200 - total flux cleaned = 0.259091 Jy ! Total flux subtracted in 200 components = 0.259091 Jy ! Clean residual min=-0.056972 max=0.111200 Jy/beam ! Clean residual mean=-0.000361 rms=0.025134 Jy/beam ! Combined flux in latest and established models = 0.45706 Jy ! Performing phase self-cal ! Adding 40 model components to the UV plane model. ! The established model now contains 70 components and 0.45706 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.356923Jy sigma=0.004206 ! Fit after self-cal, rms=0.356750Jy sigma=0.004205 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 14.25 FD 0.86 HN 1.40 KP 1.14 ! LA 0.76 MK 1.63 NL 2.06 OV 0.86 ! PT 0.74 SC 1.38 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.90 FD 0.89 HN 1.37 KP 1.09 ! LA 0.76 MK 1.57 NL 2.32 OV 0.88 ! PT 0.72 SC 1.47 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 16.50 FD 0.89 HN 1.29 KP 1.11 ! LA 0.79 MK 1.60 NL 2.05 OV 0.81 ! PT 0.75 SC 1.39 ! ! ! Correcting IF 4. ! A total of 102 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.46 HN 2.10 KP 1.00* ! LA 0.69 MK 1.15 NL 1.00* OV 1.00* ! PT 0.60 SC 1.00* ! ! ! Fit before self-cal, rms=0.356750Jy sigma=0.004205 ! Fit after self-cal, rms=3.816320Jy sigma=0.001984 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.884 mas, bmaj=10.11 mas, bpa=0.3009 degrees ! Estimated noise=1007.62 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-35, 16). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.142129 Jy ! Component: 100 - total flux cleaned = 0.20868 Jy ! Component: 150 - total flux cleaned = 0.241199 Jy ! Component: 200 - total flux cleaned = 0.258312 Jy ! Total flux subtracted in 200 components = 0.258312 Jy ! Clean residual min=-0.068943 max=0.076451 Jy/beam ! Clean residual mean=0.000328 rms=0.021090 Jy/beam ! Combined flux in latest and established models = 0.715371 Jy ! Performing phase self-cal ! Adding 64 model components to the UV plane model. ! The established model now contains 128 components and 0.715371 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=3.790137Jy sigma=0.001680 ! Fit after self-cal, rms=3.783658Jy sigma=0.001511 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=3.783658Jy sigma=0.001511 ! Fit after self-cal, rms=3.734147Jy sigma=0.001349 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.889 mas, bmaj=10.75 mas, bpa=-4.009 degrees ! Estimated noise=938.457 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0783619 Jy ! Component: 100 - total flux cleaned = 0.103602 Jy ! Component: 150 - total flux cleaned = 0.10157 Jy ! Component: 200 - total flux cleaned = 0.100687 Jy ! Total flux subtracted in 200 components = 0.100687 Jy ! Clean residual min=-0.042849 max=0.041979 Jy/beam ! Clean residual mean=-0.000032 rms=0.012457 Jy/beam ! Combined flux in latest and established models = 0.816058 Jy selfcal ! Performing phase self-cal ! Adding 38 model components to the UV plane model. ! The established model now contains 157 components and 0.816058 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=3.719747Jy sigma=0.001265 ! Fit after self-cal, rms=3.718763Jy sigma=0.001211 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0310283 Jy ! Component: 100 - total flux cleaned = 0.0320066 Jy ! Component: 150 - total flux cleaned = 0.0312657 Jy ! Component: 200 - total flux cleaned = 0.0290843 Jy ! Total flux subtracted in 200 components = 0.0290843 Jy ! Clean residual min=-0.042070 max=0.039122 Jy/beam ! Clean residual mean=0.000029 rms=0.011133 Jy/beam ! Combined flux in latest and established models = 0.845142 Jy ! Performing phase self-cal ! Adding 49 model components to the UV plane model. ! The established model now contains 187 components and 0.845142 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=3.711273Jy sigma=0.001210 ! Fit after self-cal, rms=3.711250Jy sigma=0.001202 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=3.711250Jy sigma=0.001202 ! Fit after self-cal, rms=4.966489Jy sigma=0.001142 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.979 mas, bmaj=11.12 mas, bpa=-4.502 degrees ! Estimated noise=1008.47 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0366722 Jy ! Component: 100 - total flux cleaned = 0.0429432 Jy ! Component: 150 - total flux cleaned = 0.0444522 Jy ! Component: 200 - total flux cleaned = 0.046493 Jy ! Total flux subtracted in 200 components = 0.046493 Jy ! Clean residual min=-0.039371 max=0.042007 Jy/beam ! Clean residual mean=0.000161 rms=0.011194 Jy/beam ! Combined flux in latest and established models = 0.891635 Jy selfcal ! Performing phase self-cal ! Adding 39 model components to the UV plane model. ! The established model now contains 203 components and 0.891636 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=4.958131Jy sigma=0.001145 ! Fit after self-cal, rms=4.958389Jy sigma=0.001139 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00855728 Jy ! Component: 100 - total flux cleaned = 0.00852565 Jy ! Component: 150 - total flux cleaned = 0.00795475 Jy ! Component: 200 - total flux cleaned = 0.00688626 Jy ! Total flux subtracted in 200 components = 0.00688626 Jy ! Clean residual min=-0.037845 max=0.040477 Jy/beam ! Clean residual mean=0.000181 rms=0.011076 Jy/beam ! Combined flux in latest and established models = 0.898522 Jy ! Performing phase self-cal ! Adding 34 model components to the UV plane model. ! The established model now contains 213 components and 0.898522 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=4.954169Jy sigma=0.001146 ! Fit after self-cal, rms=4.954275Jy sigma=0.001145 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=4.954275Jy sigma=0.001145 ! Fit after self-cal, rms=5.781240Jy sigma=0.001127 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=9.145 mas, bmaj=25.4 mas, bpa=-3.328 degrees ! Estimated noise=1073.91 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0446964 Jy ! Component: 100 - total flux cleaned = 0.0541662 Jy ! Component: 150 - total flux cleaned = 0.0561412 Jy ! Component: 200 - total flux cleaned = 0.0561848 Jy ! Total flux subtracted in 200 components = 0.0561848 Jy ! Clean residual min=-0.058768 max=0.059816 Jy/beam ! Clean residual mean=0.000322 rms=0.017123 Jy/beam ! Combined flux in latest and established models = 0.954707 Jy selfcal ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 221 components and 0.954707 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=5.770360Jy sigma=0.001150 ! Fit after self-cal, rms=5.770575Jy sigma=0.001148 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000944096 Jy ! Component: 100 - total flux cleaned = -0.0033579 Jy ! Component: 150 - total flux cleaned = -0.00487392 Jy ! Component: 200 - total flux cleaned = -0.00634338 Jy ! Total flux subtracted in 200 components = -0.00634338 Jy ! Clean residual min=-0.058578 max=0.057907 Jy/beam ! Clean residual mean=0.000303 rms=0.016965 Jy/beam ! Combined flux in latest and established models = 0.948363 Jy ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 225 components and 0.948363 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=5.766261Jy sigma=0.001158 ! Fit after self-cal, rms=5.766446Jy sigma=0.001157 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=4.024 mas, bmaj=11.21 mas, bpa=-4.964 degrees ! Estimated noise=1075.72 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.024 x 11.21 at -4.964 degrees (North through East) ! Clean map min=-0.066731 max=0.28367 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.928 mas, bmaj=8.582 mas, bpa=-8.581 degrees ! Estimated noise=2383.66 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.228619 Jy ! Component: 100 - total flux cleaned = 0.401179 Jy ! Component: 150 - total flux cleaned = 0.537063 Jy ! Component: 200 - total flux cleaned = 0.644973 Jy ! Total flux subtracted in 200 components = 0.644973 Jy ! Clean residual min=-0.050258 max=0.077809 Jy/beam ! Clean residual mean=-0.000188 rms=0.017334 Jy/beam ! Combined flux in latest and established models = 0.644973 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 70 model components to the UV plane model. ! The established model now contains 70 components and 0.644973 Jy ! Inverting map and beam ! Estimated beam: bmin=4.024 mas, bmaj=11.21 mas, bpa=-4.964 degrees ! Estimated noise=1075.72 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.111036 Jy ! Component: 100 - total flux cleaned = 0.186487 Jy ! Component: 150 - total flux cleaned = 0.239565 Jy ! Component: 200 - total flux cleaned = 0.269498 Jy ! Total flux subtracted in 200 components = 0.269498 Jy ! Clean residual min=-0.049058 max=0.051430 Jy/beam ! Clean residual mean=0.000015 rms=0.012741 Jy/beam ! Combined flux in latest and established models = 0.914471 Jy ! Adding 56 model components to the UV plane model. ! The established model now contains 106 components and 0.914471 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=9.145 mas, bmaj=25.4 mas, bpa=-3.328 degrees ! Estimated noise=1073.91 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0328508 Jy ! Component: 100 - total flux cleaned = 0.0343254 Jy ! Component: 150 - total flux cleaned = 0.0342737 Jy ! Component: 200 - total flux cleaned = 0.0342762 Jy ! Total flux subtracted in 200 components = 0.0342762 Jy ! Clean residual min=-0.063599 max=0.064265 Jy/beam ! Clean residual mean=0.000215 rms=0.017216 Jy/beam ! Combined flux in latest and established models = 0.948747 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -1.34039e-05 Jy ! Component: 100 - total flux cleaned = -3.26274e-05 Jy ! Component: 150 - total flux cleaned = -7.98885e-05 Jy ! Component: 200 - total flux cleaned = -0.00290907 Jy ! Total flux subtracted in 200 components = -0.00290907 Jy ! Clean residual min=-0.059867 max=0.062626 Jy/beam ! Clean residual mean=0.000242 rms=0.016936 Jy/beam ! Combined flux in latest and established models = 0.945838 Jy ! Adding 36 model components to the UV plane model. ! The established model now contains 130 components and 0.945838 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=4.024 mas, bmaj=11.21 mas, bpa=-4.964 degrees ! Estimated noise=1075.72 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00368889 Jy ! Component: 100 - total flux cleaned = 0.00371148 Jy ! Component: 150 - total flux cleaned = 0.00208535 Jy ! Component: 200 - total flux cleaned = 0.00136574 Jy ! Total flux subtracted in 200 components = 0.00136574 Jy ! Clean residual min=-0.046003 max=0.049513 Jy/beam ! Clean residual mean=0.000175 rms=0.012202 Jy/beam ! Combined flux in latest and established models = 0.947204 Jy selfcal ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 140 components and 0.947204 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=5.766738Jy sigma=0.001169 ! Fit after self-cal, rms=5.766508Jy sigma=0.001165 wmodel J0846-2610_S_2017_05_27_pus_map.mod ! Writing 140 model components to file: J0846-2610_S_2017_05_27_pus_map.mod wobs J0846-2610_S_2017_05_27_pus_uvs.fits ! Writing UV FITS file: J0846-2610_S_2017_05_27_pus_uvs.fits wwins J0846-2610_S_2017_05_27_pus_map.win ! wwins: Wrote 2 windows to J0846-2610_S_2017_05_27_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.00367272 Jy ! Component: 100 - total flux cleaned = 0.00511376 Jy ! Component: 150 - total flux cleaned = 0.00377229 Jy ! Component: 200 - total flux cleaned = 0.00117215 Jy ! Component: 250 - total flux cleaned = -0.00133904 Jy ! Component: 300 - total flux cleaned = -0.00437914 Jy ! Component: 350 - total flux cleaned = -0.00615434 Jy ! Component: 400 - total flux cleaned = -0.00730021 Jy ! Component: 450 - total flux cleaned = -0.00785721 Jy ! Component: 500 - total flux cleaned = -0.00895885 Jy ! Component: 550 - total flux cleaned = -0.0105735 Jy ! Component: 600 - total flux cleaned = -0.0116221 Jy ! Component: 650 - total flux cleaned = -0.0111035 Jy ! Component: 700 - total flux cleaned = -0.0106058 Jy ! Component: 750 - total flux cleaned = -0.00961729 Jy ! Component: 800 - total flux cleaned = -0.00863331 Jy ! Component: 850 - total flux cleaned = -0.00572708 Jy ! Component: 900 - total flux cleaned = -0.00429168 Jy ! Component: 950 - total flux cleaned = -0.00192955 Jy ! Component: 1000 - total flux cleaned = -0.000529202 Jy ! Component: 1050 - total flux cleaned = 0.00177988 Jy ! Component: 1100 - total flux cleaned = 0.00361185 Jy ! Component: 1150 - total flux cleaned = 0.00632821 Jy ! Component: 1200 - total flux cleaned = 0.00811695 Jy ! Component: 1250 - total flux cleaned = 0.00944691 Jy ! Component: 1300 - total flux cleaned = 0.0107661 Jy ! Component: 1350 - total flux cleaned = 0.0129439 Jy ! Component: 1400 - total flux cleaned = 0.0142354 Jy ! Component: 1450 - total flux cleaned = 0.0150908 Jy ! Component: 1500 - total flux cleaned = 0.0167881 Jy ! Component: 1550 - total flux cleaned = 0.0172066 Jy ! Component: 1600 - total flux cleaned = 0.0188784 Jy ! Component: 1650 - total flux cleaned = 0.0188785 Jy ! Component: 1700 - total flux cleaned = 0.0197039 Jy ! Component: 1750 - total flux cleaned = 0.0201127 Jy ! Component: 1800 - total flux cleaned = 0.0201128 Jy ! Component: 1850 - total flux cleaned = 0.0213263 Jy ! Component: 1900 - total flux cleaned = 0.0229317 Jy ! Component: 1950 - total flux cleaned = 0.0225304 Jy ! Component: 2000 - total flux cleaned = 0.0233247 Jy ! Component: 2050 - total flux cleaned = 0.0241114 Jy ! Component: 2100 - total flux cleaned = 0.0245045 Jy ! Component: 2150 - total flux cleaned = 0.025286 Jy ! Component: 2200 - total flux cleaned = 0.0260598 Jy ! Component: 2250 - total flux cleaned = 0.0268291 Jy ! Component: 2300 - total flux cleaned = 0.0268282 Jy ! Component: 2350 - total flux cleaned = 0.0275907 Jy ! Component: 2400 - total flux cleaned = 0.0287258 Jy ! Component: 2450 - total flux cleaned = 0.0294794 Jy ! Component: 2500 - total flux cleaned = 0.0302279 Jy ! Component: 2550 - total flux cleaned = 0.0306019 Jy ! Component: 2600 - total flux cleaned = 0.0317127 Jy ! Component: 2650 - total flux cleaned = 0.0320821 Jy ! Component: 2700 - total flux cleaned = 0.0324481 Jy ! Component: 2750 - total flux cleaned = 0.033178 Jy ! Component: 2800 - total flux cleaned = 0.0339048 Jy ! Component: 2850 - total flux cleaned = 0.0349884 Jy ! Component: 2900 - total flux cleaned = 0.0353485 Jy ! Component: 2950 - total flux cleaned = 0.0364218 Jy ! Component: 3000 - total flux cleaned = 0.0364232 Jy ! Component: 3050 - total flux cleaned = 0.0381965 Jy ! Component: 3100 - total flux cleaned = 0.0385486 Jy ! Component: 3150 - total flux cleaned = 0.0392536 Jy ! Component: 3200 - total flux cleaned = 0.0399537 Jy ! Component: 3250 - total flux cleaned = 0.0413467 Jy ! Component: 3300 - total flux cleaned = 0.042039 Jy ! Component: 3350 - total flux cleaned = 0.0434208 Jy ! Component: 3400 - total flux cleaned = 0.0441099 Jy ! Component: 3450 - total flux cleaned = 0.0451405 Jy ! Component: 3500 - total flux cleaned = 0.0471912 Jy ! Component: 3550 - total flux cleaned = 0.0482134 Jy ! Component: 3600 - total flux cleaned = 0.0488921 Jy ! Component: 3650 - total flux cleaned = 0.0505839 Jy ! Component: 3700 - total flux cleaned = 0.0512565 Jy ! Component: 3750 - total flux cleaned = 0.052266 Jy ! Component: 3800 - total flux cleaned = 0.0532716 Jy ! Component: 3850 - total flux cleaned = 0.0542754 Jy ! Component: 3900 - total flux cleaned = 0.0556068 Jy ! Component: 3950 - total flux cleaned = 0.0575982 Jy ! Component: 4000 - total flux cleaned = 0.0579264 Jy ! Component: 4050 - total flux cleaned = 0.0592424 Jy ! Total flux subtracted in 4096 components = 0.0605573 Jy ! Clean residual min=-0.017900 max=0.018371 Jy/beam ! Clean residual mean=-0.000113 rms=0.007283 Jy/beam ! Combined flux in latest and established models = 1.00776 Jy keep ! Adding 460 model components to the UV plane model. ! The established model now contains 600 components and 1.00776 Jy ![Exited script file: muppet] wmap "J0846-2610_S_2017_05_27_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.024 x 11.21 at -4.964 degrees (North through East) ! Clean map min=-0.057124 max=0.28089 Jy/beam ! Writing clean map to FITS file: J0846-2610_S_2017_05_27_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.28089 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.00731006 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -7.80741 7.80741 15.6148 31.2296 62.4593 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0219 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.28 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.024 x 11.21 at -4.964 degrees (North through East) ! Clean map min=-0.057124 max=0.28089 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J0846-2610_S_2017_05_27_pus_uvs.log closed on Fri May 3 11:02:15 2019