! Started logfile: J0846-2607_S_2017_05_27_pus_uvs.log on Fri May 3 11:02:01 2019 obs J0846-2607_S_2017_05_27_pus_uva.fits ! Reading UV FITS file: J0846-2607_S_2017_05_27_pus_uva.fits ! AN table 1: 76 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.833918 visibilities/baseline/integration-bin. ! Found source: J0846-2607 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 1211 lines of history. ! ! Reading 11408 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J0846-2607_S_2017_05_27_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 100 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 65 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 90 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 511 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.985289Jy sigma=0.066699 ! Fit after self-cal, rms=0.975563Jy sigma=0.066651 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.338 mas, bmaj=8.88 mas, bpa=10.07 degrees ! Estimated noise=485.791 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0207493 Jy ! Component: 100 - total flux cleaned = 0.0321136 Jy ! Total flux subtracted in 100 components = 0.0321136 Jy ! Clean residual min=-0.007664 max=0.010966 Jy/beam ! Clean residual mean=-0.000015 rms=0.002614 Jy/beam ! Combined flux in latest and established models = 0.0321136 Jy ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 21 components and 0.0321136 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.491026Jy sigma=0.001660 ! Fit after self-cal, rms=0.490886Jy sigma=0.001638 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=4.046 mas, bmaj=11.7 mas, bpa=13.12 degrees ! Estimated noise=325.533 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0134765 Jy ! Component: 100 - total flux cleaned = 0.0222223 Jy ! Component: 150 - total flux cleaned = 0.0280224 Jy ! Component: 200 - total flux cleaned = 0.0318792 Jy ! Total flux subtracted in 200 components = 0.0318792 Jy ! Clean residual min=-0.011062 max=0.018504 Jy/beam ! Clean residual mean=-0.000068 rms=0.004331 Jy/beam ! Combined flux in latest and established models = 0.0639928 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 31 components and 0.0639928 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.486924Jy sigma=0.002340 ! Fit after self-cal, rms=0.486252Jy sigma=0.002332 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.12 FD 0.45 HN 0.84 KP 0.56 ! LA 0.56 MK 1.00* NL 0.62 OV 0.52 ! PT 0.56 SC 0.97 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 18.46 FD 0.47 HN 1.75 KP 0.66 ! LA 0.73 MK 1.50 NL 0.87 OV 0.73 ! PT 0.63 SC 1.25 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.33 FD 0.48 HN 0.88 KP 0.56 ! LA 0.55 MK 1.00* NL 0.69 OV 0.46 ! PT 0.52 SC 0.77 ! ! ! Correcting IF 4. ! A total of 117 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.50 HN 0.47 KP 1.00* ! LA 0.50 MK 1.00* NL 1.00* OV 1.00* ! PT 0.51 SC 1.00* ! ! ! Fit before self-cal, rms=0.486252Jy sigma=0.002332 ! Fit after self-cal, rms=0.133970Jy sigma=0.000814 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=4.525 mas, bmaj=14.72 mas, bpa=10.82 degrees ! Estimated noise=500.907 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0016007 Jy ! Component: 100 - total flux cleaned = 0.00181106 Jy ! Component: 150 - total flux cleaned = 0.00186987 Jy ! Component: 200 - total flux cleaned = 0.00177963 Jy ! Total flux subtracted in 200 components = 0.00177963 Jy ! Clean residual min=-0.003911 max=0.003429 Jy/beam ! Clean residual mean=-0.000019 rms=0.000952 Jy/beam ! Combined flux in latest and established models = 0.0657724 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 38 components and 0.0657724 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.133788Jy sigma=0.000812 ! Fit after self-cal, rms=0.131324Jy sigma=0.000745 ! Inverting map ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00453598 Jy ! Component: 100 - total flux cleaned = 0.00490315 Jy ! Component: 150 - total flux cleaned = 0.00495338 Jy ! Component: 200 - total flux cleaned = 0.00495691 Jy ! Total flux subtracted in 200 components = 0.00495691 Jy ! Clean residual min=-0.002894 max=0.003844 Jy/beam ! Clean residual mean=-0.000036 rms=0.000979 Jy/beam ! Combined flux in latest and established models = 0.0707293 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 44 components and 0.0707293 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.130733Jy sigma=0.000745 ! Fit after self-cal, rms=0.130752Jy sigma=0.000743 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.130752Jy sigma=0.000743 ! Fit after self-cal, rms=0.090268Jy sigma=0.000709 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=4.285 mas, bmaj=14.85 mas, bpa=10.46 degrees ! Estimated noise=497.043 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00145723 Jy ! Component: 100 - total flux cleaned = 0.00169785 Jy ! Component: 150 - total flux cleaned = 0.00169773 Jy ! Component: 200 - total flux cleaned = 0.00169683 Jy ! Total flux subtracted in 200 components = 0.00169683 Jy ! Clean residual min=-0.002509 max=0.003436 Jy/beam ! Clean residual mean=-0.000023 rms=0.000814 Jy/beam ! Combined flux in latest and established models = 0.0724262 Jy selfcal ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 55 components and 0.0724262 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.089986Jy sigma=0.000707 ! Fit after self-cal, rms=0.090039Jy sigma=0.000706 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000200678 Jy ! Component: 100 - total flux cleaned = -0.000207692 Jy ! Component: 150 - total flux cleaned = -0.00027044 Jy ! Component: 200 - total flux cleaned = -0.000325352 Jy ! Total flux subtracted in 200 components = -0.000325352 Jy ! Clean residual min=-0.002367 max=0.003401 Jy/beam ! Clean residual mean=-0.000024 rms=0.000821 Jy/beam ! Combined flux in latest and established models = 0.0721008 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 60 components and 0.0721008 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.089886Jy sigma=0.000704 ! Fit after self-cal, rms=0.089886Jy sigma=0.000704 ! Inverting map ! Added new window around map position (14, 25.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00346772 Jy ! Component: 100 - total flux cleaned = 0.00520554 Jy ! Component: 150 - total flux cleaned = 0.00571602 Jy ! Component: 200 - total flux cleaned = 0.00583272 Jy ! Total flux subtracted in 200 components = 0.00583272 Jy ! Clean residual min=-0.002432 max=0.002942 Jy/beam ! Clean residual mean=-0.000012 rms=0.000724 Jy/beam ! Combined flux in latest and established models = 0.0779335 Jy ! Performing phase self-cal ! Adding 35 model components to the UV plane model. ! The established model now contains 90 components and 0.0779335 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.089629Jy sigma=0.000700 ! Fit after self-cal, rms=0.089534Jy sigma=0.000699 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.089534Jy sigma=0.000699 ! Fit after self-cal, rms=0.089836Jy sigma=0.000697 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=4.215 mas, bmaj=14.38 mas, bpa=10.04 degrees ! Estimated noise=501.107 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0024844 Jy ! Component: 100 - total flux cleaned = 0.00323955 Jy ! Component: 150 - total flux cleaned = 0.00363027 Jy ! Component: 200 - total flux cleaned = 0.0038637 Jy ! Total flux subtracted in 200 components = 0.0038637 Jy ! Clean residual min=-0.002285 max=0.002731 Jy/beam ! Clean residual mean=-0.000007 rms=0.000677 Jy/beam ! Combined flux in latest and established models = 0.0817972 Jy selfcal ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 99 components and 0.0817972 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.089574Jy sigma=0.000695 ! Fit after self-cal, rms=0.089486Jy sigma=0.000694 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00053453 Jy ! Component: 100 - total flux cleaned = 0.000535939 Jy ! Component: 150 - total flux cleaned = 0.000592089 Jy ! Component: 200 - total flux cleaned = 0.000592435 Jy ! Total flux subtracted in 200 components = 0.000592435 Jy ! Clean residual min=-0.002216 max=0.002628 Jy/beam ! Clean residual mean=-0.000006 rms=0.000671 Jy/beam ! Combined flux in latest and established models = 0.0823896 Jy ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 107 components and 0.0823896 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.089350Jy sigma=0.000693 ! Fit after self-cal, rms=0.089317Jy sigma=0.000693 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.089317Jy sigma=0.000693 ! Fit after self-cal, rms=0.088264Jy sigma=0.000692 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.533 mas, bmaj=22.53 mas, bpa=1.702 degrees ! Estimated noise=539.209 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00225989 Jy ! Component: 100 - total flux cleaned = 0.00322832 Jy ! Component: 150 - total flux cleaned = 0.0035245 Jy ! Component: 200 - total flux cleaned = 0.00357082 Jy ! Total flux subtracted in 200 components = 0.00357082 Jy ! Clean residual min=-0.002731 max=0.002741 Jy/beam ! Clean residual mean=-0.000005 rms=0.000778 Jy/beam ! Combined flux in latest and established models = 0.0859605 Jy selfcal ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 119 components and 0.0859605 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.088092Jy sigma=0.000691 ! Fit after self-cal, rms=0.088031Jy sigma=0.000690 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000404861 Jy ! Component: 100 - total flux cleaned = 0.000317689 Jy ! Component: 150 - total flux cleaned = 0.000317852 Jy ! Component: 200 - total flux cleaned = 0.000278005 Jy ! Total flux subtracted in 200 components = 0.000278005 Jy ! Clean residual min=-0.002691 max=0.002662 Jy/beam ! Clean residual mean=-0.000004 rms=0.000768 Jy/beam ! Combined flux in latest and established models = 0.0862385 Jy ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 131 components and 0.0862385 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.087971Jy sigma=0.000690 ! Fit after self-cal, rms=0.087948Jy sigma=0.000690 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=4.118 mas, bmaj=13.92 mas, bpa=9.691 degrees ! Estimated noise=499.476 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.118 x 13.92 at 9.691 degrees (North through East) ! Clean map min=-0.0021064 max=0.039503 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.287 mas, bmaj=11.55 mas, bpa=9.027 degrees ! Estimated noise=796.401 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0368344 Jy ! Component: 100 - total flux cleaned = 0.0521428 Jy ! Component: 150 - total flux cleaned = 0.0600665 Jy ! Component: 200 - total flux cleaned = 0.0648015 Jy ! Total flux subtracted in 200 components = 0.0648015 Jy ! Clean residual min=-0.002660 max=0.003088 Jy/beam ! Clean residual mean=-0.000025 rms=0.000795 Jy/beam ! Combined flux in latest and established models = 0.0648015 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 34 model components to the UV plane model. ! The established model now contains 34 components and 0.0648015 Jy ! Inverting map and beam ! Estimated beam: bmin=4.118 mas, bmaj=13.92 mas, bpa=9.691 degrees ! Estimated noise=499.476 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00467172 Jy ! Component: 100 - total flux cleaned = 0.00783218 Jy ! Component: 150 - total flux cleaned = 0.0101743 Jy ! Component: 200 - total flux cleaned = 0.0120012 Jy ! Total flux subtracted in 200 components = 0.0120012 Jy ! Clean residual min=-0.001960 max=0.002277 Jy/beam ! Clean residual mean=-0.000019 rms=0.000647 Jy/beam ! Combined flux in latest and established models = 0.0768028 Jy ! Adding 48 model components to the UV plane model. ! The established model now contains 73 components and 0.0768027 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.533 mas, bmaj=22.53 mas, bpa=1.702 degrees ! Estimated noise=539.209 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0020259 Jy ! Component: 100 - total flux cleaned = 0.00343502 Jy ! Component: 150 - total flux cleaned = 0.00437713 Jy ! Component: 200 - total flux cleaned = 0.00472606 Jy ! Total flux subtracted in 200 components = 0.00472606 Jy ! Clean residual min=-0.002237 max=0.002414 Jy/beam ! Clean residual mean=-0.000019 rms=0.000746 Jy/beam ! Combined flux in latest and established models = 0.0815288 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000135645 Jy ! Component: 100 - total flux cleaned = 0.000210611 Jy ! Component: 150 - total flux cleaned = 0.00027949 Jy ! Component: 200 - total flux cleaned = 0.000344309 Jy ! Total flux subtracted in 200 components = 0.000344309 Jy ! Clean residual min=-0.002225 max=0.002435 Jy/beam ! Clean residual mean=-0.000018 rms=0.000735 Jy/beam ! Combined flux in latest and established models = 0.0818731 Jy ! Adding 37 model components to the UV plane model. ! The established model now contains 107 components and 0.0818731 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=4.118 mas, bmaj=13.92 mas, bpa=9.691 degrees ! Estimated noise=499.476 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000311657 Jy ! Component: 100 - total flux cleaned = -0.000286128 Jy ! Component: 150 - total flux cleaned = -0.00028661 Jy ! Component: 200 - total flux cleaned = -0.000285784 Jy ! Total flux subtracted in 200 components = -0.000285784 Jy ! Clean residual min=-0.001866 max=0.002317 Jy/beam ! Clean residual mean=-0.000011 rms=0.000571 Jy/beam ! Combined flux in latest and established models = 0.0815873 Jy selfcal ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 125 components and 0.0815873 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.087618Jy sigma=0.000688 ! Fit after self-cal, rms=0.087362Jy sigma=0.000687 wmodel J0846-2607_S_2017_05_27_pus_map.mod ! Writing 125 model components to file: J0846-2607_S_2017_05_27_pus_map.mod wobs J0846-2607_S_2017_05_27_pus_uvs.fits ! Writing UV FITS file: J0846-2607_S_2017_05_27_pus_uvs.fits wwins J0846-2607_S_2017_05_27_pus_map.win ! wwins: Wrote 2 windows to J0846-2607_S_2017_05_27_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.000138535 Jy ! Component: 100 - total flux cleaned = 0.000237349 Jy ! Component: 150 - total flux cleaned = 0.000331997 Jy ! Component: 200 - total flux cleaned = 0.000271728 Jy ! Component: 250 - total flux cleaned = 0.000185084 Jy ! Component: 300 - total flux cleaned = 0.000157177 Jy ! Component: 350 - total flux cleaned = 7.54283e-05 Jy ! Component: 400 - total flux cleaned = -2.88432e-06 Jy ! Component: 450 - total flux cleaned = -7.97509e-05 Jy ! Component: 500 - total flux cleaned = -0.000179523 Jy ! Component: 550 - total flux cleaned = -0.000252392 Jy ! Component: 600 - total flux cleaned = -0.000370378 Jy ! Component: 650 - total flux cleaned = -0.000438833 Jy ! Component: 700 - total flux cleaned = -0.000527909 Jy ! Component: 750 - total flux cleaned = -0.000570876 Jy ! Component: 800 - total flux cleaned = -0.000549495 Jy ! Component: 850 - total flux cleaned = -0.000570979 Jy ! Component: 900 - total flux cleaned = -0.000632997 Jy ! Component: 950 - total flux cleaned = -0.000672988 Jy ! Component: 1000 - total flux cleaned = -0.000672427 Jy ! Component: 1050 - total flux cleaned = -0.000691811 Jy ! Component: 1100 - total flux cleaned = -0.000787439 Jy ! Component: 1150 - total flux cleaned = -0.000843504 Jy ! Component: 1200 - total flux cleaned = -0.000898865 Jy ! Component: 1250 - total flux cleaned = -0.000989611 Jy ! Component: 1300 - total flux cleaned = -0.00104293 Jy ! Component: 1350 - total flux cleaned = -0.00113052 Jy ! Component: 1400 - total flux cleaned = -0.00114797 Jy ! Component: 1450 - total flux cleaned = -0.00125046 Jy ! Component: 1500 - total flux cleaned = -0.00130102 Jy ! Component: 1550 - total flux cleaned = -0.00136699 Jy ! Component: 1600 - total flux cleaned = -0.00141568 Jy ! Component: 1650 - total flux cleaned = -0.00144761 Jy ! Component: 1700 - total flux cleaned = -0.00144758 Jy ! Component: 1750 - total flux cleaned = -0.00149479 Jy ! Component: 1800 - total flux cleaned = -0.00155656 Jy ! Component: 1850 - total flux cleaned = -0.00152588 Jy ! Component: 1900 - total flux cleaned = -0.00154082 Jy ! Component: 1950 - total flux cleaned = -0.00155544 Jy ! Component: 2000 - total flux cleaned = -0.00151137 Jy ! Component: 2050 - total flux cleaned = -0.00149699 Jy ! Component: 2100 - total flux cleaned = -0.00148267 Jy ! Component: 2150 - total flux cleaned = -0.0014121 Jy ! Component: 2200 - total flux cleaned = -0.00139814 Jy ! Component: 2250 - total flux cleaned = -0.00135685 Jy ! Component: 2300 - total flux cleaned = -0.00134327 Jy ! Component: 2350 - total flux cleaned = -0.00130287 Jy ! Component: 2400 - total flux cleaned = -0.00128937 Jy ! Component: 2450 - total flux cleaned = -0.00122317 Jy ! Component: 2500 - total flux cleaned = -0.00119713 Jy ! Component: 2550 - total flux cleaned = -0.001197 Jy ! Component: 2600 - total flux cleaned = -0.00117126 Jy ! Component: 2650 - total flux cleaned = -0.00113323 Jy ! Component: 2700 - total flux cleaned = -0.00112057 Jy ! Component: 2750 - total flux cleaned = -0.00109584 Jy ! Component: 2800 - total flux cleaned = -0.00105905 Jy ! Component: 2850 - total flux cleaned = -0.00108342 Jy ! Component: 2900 - total flux cleaned = -0.00102291 Jy ! Component: 2950 - total flux cleaned = -0.00102301 Jy ! Component: 3000 - total flux cleaned = -0.000963848 Jy ! Component: 3050 - total flux cleaned = -0.000963912 Jy ! Component: 3100 - total flux cleaned = -0.000917378 Jy ! Component: 3150 - total flux cleaned = -0.000905822 Jy ! Component: 3200 - total flux cleaned = -0.000882843 Jy ! Component: 3250 - total flux cleaned = -0.000803511 Jy ! Component: 3300 - total flux cleaned = -0.000769871 Jy ! Component: 3350 - total flux cleaned = -0.000725501 Jy ! Component: 3400 - total flux cleaned = -0.000692372 Jy ! Component: 3450 - total flux cleaned = -0.000648465 Jy ! Component: 3500 - total flux cleaned = -0.000615717 Jy ! Component: 3550 - total flux cleaned = -0.000572489 Jy ! Component: 3600 - total flux cleaned = -0.000529565 Jy ! Component: 3650 - total flux cleaned = -0.000476365 Jy ! Component: 3700 - total flux cleaned = -0.000423702 Jy ! Component: 3750 - total flux cleaned = -0.000381804 Jy ! Component: 3800 - total flux cleaned = -0.00037138 Jy ! Component: 3850 - total flux cleaned = -0.000309393 Jy ! Component: 3900 - total flux cleaned = -0.000268462 Jy ! Component: 3950 - total flux cleaned = -0.000227774 Jy ! Component: 4000 - total flux cleaned = -0.00021777 Jy ! Component: 4050 - total flux cleaned = -0.000207807 Jy ! Total flux subtracted in 4096 components = -0.000217784 Jy ! Clean residual min=-0.000573 max=0.000578 Jy/beam ! Clean residual mean=0.000002 rms=0.000195 Jy/beam ! Combined flux in latest and established models = 0.0813695 Jy keep ! Adding 306 model components to the UV plane model. ! The established model now contains 429 components and 0.0813695 Jy ![Exited script file: muppet] wmap "J0846-2607_S_2017_05_27_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.118 x 13.92 at 9.691 degrees (North through East) ! Clean map min=-0.0012053 max=0.046363 Jy/beam ! Writing clean map to FITS file: J0846-2607_S_2017_05_27_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.0463631 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000191997 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -1.24235 1.24235 2.48469 4.96938 9.93876 19.8775 39.7551 79.5101 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0005 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.046 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.118 x 13.92 at 9.691 degrees (North through East) ! Clean map min=-0.0012053 max=0.046363 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J0846-2607_S_2017_05_27_pus_uvs.log closed on Fri May 3 11:02:07 2019