! Started logfile: J0845-3718_S_2017_05_01_pus_uvs.log on Wed May 1 18:32:28 2019 obs J0845-3718_S_2017_05_01_pus_uva.fits ! Reading UV FITS file: J0845-3718_S_2017_05_01_pus_uva.fits ! AN table 1: 194 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.544101 visibilities/baseline/integration-bin. ! Found source: J0845-3718 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 788 lines of history. ! ! Reading 19000 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J0845-3718_S_2017_05_01_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 709 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 737 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 709 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 1344 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.994504Jy sigma=0.005083 ! Fit after self-cal, rms=0.931049Jy sigma=0.004796 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.39 mas, bmaj=6.266 mas, bpa=-4.009 degrees ! Estimated noise=1912.88 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0612989 Jy ! Component: 100 - total flux cleaned = 0.0748215 Jy ! Total flux subtracted in 100 components = 0.0748215 Jy ! Clean residual min=-0.006737 max=0.005717 Jy/beam ! Clean residual mean=-0.000010 rms=0.001407 Jy/beam ! Combined flux in latest and established models = 0.0748215 Jy ! Performing phase self-cal ! Adding 5 model components to the UV plane model. ! The established model now contains 5 components and 0.0748215 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.138570Jy sigma=0.000635 ! Fit after self-cal, rms=0.137441Jy sigma=0.000630 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.118 mas, bmaj=8.153 mas, bpa=-1.771 degrees ! Estimated noise=1153.32 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00558561 Jy ! Component: 100 - total flux cleaned = 0.00797651 Jy ! Component: 150 - total flux cleaned = 0.0090462 Jy ! Component: 200 - total flux cleaned = 0.00919928 Jy ! Total flux subtracted in 200 components = 0.00919928 Jy ! Clean residual min=-0.003334 max=0.003264 Jy/beam ! Clean residual mean=0.000005 rms=0.000846 Jy/beam ! Combined flux in latest and established models = 0.0840207 Jy ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 16 components and 0.0840208 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.137214Jy sigma=0.000629 ! Fit after self-cal, rms=0.137148Jy sigma=0.000629 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.87 FD 0.97 HN 0.86 KP 1.06 ! LA 0.97 MK 1.10 NL 0.89 OV 1.12 ! PT 1.07 SC 0.97 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 0.93 HN 0.86 KP 1.00 ! LA 0.98 MK 1.01 NL 0.96 OV 1.08 ! PT 1.04 SC 1.12 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.98 FD 0.99 HN 0.85 KP 1.03 ! LA 1.00 MK 1.11 NL 0.92 OV 1.07 ! PT 0.99 SC 1.03 ! ! ! Correcting IF 4. ! A total of 90 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.90 FD 0.94 HN 0.77 KP 1.00* ! LA 0.91 MK 0.85 NL 1.00* OV 1.00* ! PT 0.97 SC 1.00* ! ! ! Fit before self-cal, rms=0.137148Jy sigma=0.000629 ! Fit after self-cal, rms=0.132905Jy sigma=0.000628 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.139 mas, bmaj=8.186 mas, bpa=-2.179 degrees ! Estimated noise=1159.48 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000209132 Jy ! Component: 100 - total flux cleaned = -0.00021061 Jy ! Component: 150 - total flux cleaned = -0.000239333 Jy ! Component: 200 - total flux cleaned = -0.000239029 Jy ! Total flux subtracted in 200 components = -0.000239029 Jy ! Clean residual min=-0.002866 max=0.003029 Jy/beam ! Clean residual mean=-0.000000 rms=0.000740 Jy/beam ! Combined flux in latest and established models = 0.0837817 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 23 components and 0.0837817 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.132890Jy sigma=0.000628 ! Fit after self-cal, rms=0.132733Jy sigma=0.000628 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.132733Jy sigma=0.000628 ! Fit after self-cal, rms=0.132466Jy sigma=0.000627 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.145 mas, bmaj=8.173 mas, bpa=-2.413 degrees ! Estimated noise=1158.82 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -8.67635e-06 Jy ! Component: 100 - total flux cleaned = 1.83396e-05 Jy ! Component: 150 - total flux cleaned = 3.74535e-05 Jy ! Component: 200 - total flux cleaned = 5.40083e-05 Jy ! Total flux subtracted in 200 components = 5.40083e-05 Jy ! Clean residual min=-0.002851 max=0.002815 Jy/beam ! Clean residual mean=-0.000000 rms=0.000707 Jy/beam ! Combined flux in latest and established models = 0.0838357 Jy selfcal ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 31 components and 0.0838357 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.132459Jy sigma=0.000627 ! Fit after self-cal, rms=0.132455Jy sigma=0.000627 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000103325 Jy ! Component: 100 - total flux cleaned = 0.000105756 Jy ! Component: 150 - total flux cleaned = 0.00012299 Jy ! Component: 200 - total flux cleaned = 0.000122962 Jy ! Total flux subtracted in 200 components = 0.000122962 Jy ! Clean residual min=-0.002929 max=0.002798 Jy/beam ! Clean residual mean=0.000000 rms=0.000706 Jy/beam ! Combined flux in latest and established models = 0.0839587 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 34 components and 0.0839587 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.132450Jy sigma=0.000627 ! Fit after self-cal, rms=0.132447Jy sigma=0.000627 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.132447Jy sigma=0.000627 ! Fit after self-cal, rms=0.132114Jy sigma=0.000627 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.146 mas, bmaj=8.147 mas, bpa=-2.427 degrees ! Estimated noise=1157.4 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -8.69515e-05 Jy ! Component: 100 - total flux cleaned = -7.09629e-05 Jy ! Component: 150 - total flux cleaned = -8.60041e-05 Jy ! Component: 200 - total flux cleaned = -0.000112836 Jy ! Total flux subtracted in 200 components = -0.000112836 Jy ! Clean residual min=-0.002725 max=0.002654 Jy/beam ! Clean residual mean=0.000001 rms=0.000693 Jy/beam ! Combined flux in latest and established models = 0.0838458 Jy selfcal ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 37 components and 0.0838458 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.132110Jy sigma=0.000627 ! Fit after self-cal, rms=0.132111Jy sigma=0.000627 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 6.22127e-05 Jy ! Component: 100 - total flux cleaned = 8.08661e-05 Jy ! Component: 150 - total flux cleaned = 8.01343e-05 Jy ! Component: 200 - total flux cleaned = 6.70978e-05 Jy ! Total flux subtracted in 200 components = 6.70978e-05 Jy ! Clean residual min=-0.002715 max=0.002781 Jy/beam ! Clean residual mean=-0.000000 rms=0.000693 Jy/beam ! Combined flux in latest and established models = 0.0839129 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 39 components and 0.0839129 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.132106Jy sigma=0.000627 ! Fit after self-cal, rms=0.132107Jy sigma=0.000627 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.132107Jy sigma=0.000627 ! Fit after self-cal, rms=0.132067Jy sigma=0.000627 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.335 mas, bmaj=24.78 mas, bpa=2.908 degrees ! Estimated noise=1438.7 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 4.64145e-05 Jy ! Component: 100 - total flux cleaned = 4.47643e-05 Jy ! Component: 150 - total flux cleaned = 4.39939e-05 Jy ! Component: 200 - total flux cleaned = 4.41417e-05 Jy ! Total flux subtracted in 200 components = 4.41417e-05 Jy ! Clean residual min=-0.002709 max=0.002690 Jy/beam ! Clean residual mean=-0.000001 rms=0.000843 Jy/beam ! Combined flux in latest and established models = 0.0839571 Jy selfcal ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 45 components and 0.0839571 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.132066Jy sigma=0.000627 ! Fit after self-cal, rms=0.132070Jy sigma=0.000627 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -2.42345e-05 Jy ! Component: 100 - total flux cleaned = -2.35359e-05 Jy ! Component: 150 - total flux cleaned = -1.09123e-05 Jy ! Component: 200 - total flux cleaned = -1.86422e-06 Jy ! Total flux subtracted in 200 components = -1.86422e-06 Jy ! Clean residual min=-0.002737 max=0.002678 Jy/beam ! Clean residual mean=-0.000000 rms=0.000840 Jy/beam ! Combined flux in latest and established models = 0.0839552 Jy ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 45 components and 0.0839552 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.132070Jy sigma=0.000627 ! Fit after self-cal, rms=0.132059Jy sigma=0.000627 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.146 mas, bmaj=8.138 mas, bpa=-2.419 degrees ! Estimated noise=1156.2 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.146 x 8.138 at -2.419 degrees (North through East) ! Clean map min=-0.0026182 max=0.077517 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.414 mas, bmaj=6.275 mas, bpa=-5.156 degrees ! Estimated noise=1891.38 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.061446 Jy ! Component: 100 - total flux cleaned = 0.0758718 Jy ! Component: 150 - total flux cleaned = 0.079529 Jy ! Component: 200 - total flux cleaned = 0.0807167 Jy ! Total flux subtracted in 200 components = 0.0807167 Jy ! Clean residual min=-0.004800 max=0.004297 Jy/beam ! Clean residual mean=-0.000006 rms=0.001091 Jy/beam ! Combined flux in latest and established models = 0.0807167 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 11 model components to the UV plane model. ! The established model now contains 11 components and 0.0807167 Jy ! Inverting map and beam ! Estimated beam: bmin=3.146 mas, bmaj=8.138 mas, bpa=-2.419 degrees ! Estimated noise=1156.2 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (2.5, -0.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00328435 Jy ! Component: 100 - total flux cleaned = 0.00394824 Jy ! Component: 150 - total flux cleaned = 0.00426774 Jy ! Component: 200 - total flux cleaned = 0.00437956 Jy ! Total flux subtracted in 200 components = 0.00437956 Jy ! Clean residual min=-0.002851 max=0.002738 Jy/beam ! Clean residual mean=0.000004 rms=0.000683 Jy/beam ! Combined flux in latest and established models = 0.0850963 Jy ! Adding 25 model components to the UV plane model. ! The established model now contains 34 components and 0.0850963 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.335 mas, bmaj=24.78 mas, bpa=2.908 degrees ! Estimated noise=1438.7 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000508914 Jy ! Component: 100 - total flux cleaned = 0.000492495 Jy ! Component: 150 - total flux cleaned = 0.000506164 Jy ! Component: 200 - total flux cleaned = 0.000518792 Jy ! Total flux subtracted in 200 components = 0.000518792 Jy ! Clean residual min=-0.002731 max=0.002524 Jy/beam ! Clean residual mean=0.000009 rms=0.000799 Jy/beam ! Combined flux in latest and established models = 0.0856151 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 1.2146e-05 Jy ! Component: 100 - total flux cleaned = 2.28246e-05 Jy ! Component: 150 - total flux cleaned = 3.31593e-05 Jy ! Component: 200 - total flux cleaned = 5.2223e-05 Jy ! Total flux subtracted in 200 components = 5.2223e-05 Jy ! Clean residual min=-0.002747 max=0.002525 Jy/beam ! Clean residual mean=0.000009 rms=0.000796 Jy/beam ! Combined flux in latest and established models = 0.0856673 Jy ! Adding 13 model components to the UV plane model. ! The established model now contains 46 components and 0.0856673 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.146 mas, bmaj=8.138 mas, bpa=-2.419 degrees ! Estimated noise=1156.2 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 1.93531e-05 Jy ! Component: 100 - total flux cleaned = -4.06295e-05 Jy ! Component: 150 - total flux cleaned = -9.34656e-05 Jy ! Component: 200 - total flux cleaned = -0.000118777 Jy ! Total flux subtracted in 200 components = -0.000118777 Jy ! Clean residual min=-0.002812 max=0.002685 Jy/beam ! Clean residual mean=0.000005 rms=0.000670 Jy/beam ! Combined flux in latest and established models = 0.0855485 Jy selfcal ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 54 components and 0.0855485 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.132045Jy sigma=0.000627 ! Fit after self-cal, rms=0.132038Jy sigma=0.000627 wmodel J0845-3718_S_2017_05_01_pus_map.mod ! Writing 54 model components to file: J0845-3718_S_2017_05_01_pus_map.mod wobs J0845-3718_S_2017_05_01_pus_uvs.fits ! Writing UV FITS file: J0845-3718_S_2017_05_01_pus_uvs.fits wwins J0845-3718_S_2017_05_01_pus_map.win ! wwins: Wrote 2 windows to J0845-3718_S_2017_05_01_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.00077042 Jy ! Component: 100 - total flux cleaned = -0.00161267 Jy ! Component: 150 - total flux cleaned = -0.00227052 Jy ! Component: 200 - total flux cleaned = -0.00272705 Jy ! Component: 250 - total flux cleaned = -0.00304361 Jy ! Component: 300 - total flux cleaned = -0.00327136 Jy ! Component: 350 - total flux cleaned = -0.00345437 Jy ! Component: 400 - total flux cleaned = -0.00341995 Jy ! Component: 450 - total flux cleaned = -0.0034204 Jy ! Component: 500 - total flux cleaned = -0.00342074 Jy ! Component: 550 - total flux cleaned = -0.00351892 Jy ! Component: 600 - total flux cleaned = -0.00355043 Jy ! Component: 650 - total flux cleaned = -0.00361321 Jy ! Component: 700 - total flux cleaned = -0.00370558 Jy ! Component: 750 - total flux cleaned = -0.00370537 Jy ! Component: 800 - total flux cleaned = -0.00376425 Jy ! Component: 850 - total flux cleaned = -0.00370617 Jy ! Component: 900 - total flux cleaned = -0.00367797 Jy ! Component: 950 - total flux cleaned = -0.0036773 Jy ! Component: 1000 - total flux cleaned = -0.00354051 Jy ! Component: 1050 - total flux cleaned = -0.00351421 Jy ! Component: 1100 - total flux cleaned = -0.00351471 Jy ! Component: 1150 - total flux cleaned = -0.00354078 Jy ! Component: 1200 - total flux cleaned = -0.00343845 Jy ! Component: 1250 - total flux cleaned = -0.00343803 Jy ! Component: 1300 - total flux cleaned = -0.00341263 Jy ! Component: 1350 - total flux cleaned = -0.00336329 Jy ! Component: 1400 - total flux cleaned = -0.00333932 Jy ! Component: 1450 - total flux cleaned = -0.00329187 Jy ! Component: 1500 - total flux cleaned = -0.00336246 Jy ! Component: 1550 - total flux cleaned = -0.00329272 Jy ! Component: 1600 - total flux cleaned = -0.00320201 Jy ! Component: 1650 - total flux cleaned = -0.00315738 Jy ! Component: 1700 - total flux cleaned = -0.00306889 Jy ! Component: 1750 - total flux cleaned = -0.00304721 Jy ! Component: 1800 - total flux cleaned = -0.00298213 Jy ! Component: 1850 - total flux cleaned = -0.00293934 Jy ! Component: 1900 - total flux cleaned = -0.00291838 Jy ! Component: 1950 - total flux cleaned = -0.00291822 Jy ! Component: 2000 - total flux cleaned = -0.00285618 Jy ! Component: 2050 - total flux cleaned = -0.00291764 Jy ! Component: 2100 - total flux cleaned = -0.00295812 Jy ! Component: 2150 - total flux cleaned = -0.00291806 Jy ! Component: 2200 - total flux cleaned = -0.00293811 Jy ! Component: 2250 - total flux cleaned = -0.00295727 Jy ! Component: 2300 - total flux cleaned = -0.00293766 Jy ! Component: 2350 - total flux cleaned = -0.00286092 Jy ! Component: 2400 - total flux cleaned = -0.00286093 Jy ! Component: 2450 - total flux cleaned = -0.0028046 Jy ! Component: 2500 - total flux cleaned = -0.00273038 Jy ! Component: 2550 - total flux cleaned = -0.0026755 Jy ! Component: 2600 - total flux cleaned = -0.00267561 Jy ! Component: 2650 - total flux cleaned = -0.00260366 Jy ! Component: 2700 - total flux cleaned = -0.00255016 Jy ! Component: 2750 - total flux cleaned = -0.0024969 Jy ! Component: 2800 - total flux cleaned = -0.00240922 Jy ! Component: 2850 - total flux cleaned = -0.0023573 Jy ! Component: 2900 - total flux cleaned = -0.00233992 Jy ! Component: 2950 - total flux cleaned = -0.00228862 Jy ! Component: 3000 - total flux cleaned = -0.00227157 Jy ! Component: 3050 - total flux cleaned = -0.00223798 Jy ! Component: 3100 - total flux cleaned = -0.00220449 Jy ! Component: 3150 - total flux cleaned = -0.00220468 Jy ! Component: 3200 - total flux cleaned = -0.0021558 Jy ! Component: 3250 - total flux cleaned = -0.00217231 Jy ! Component: 3300 - total flux cleaned = -0.00217232 Jy ! Component: 3350 - total flux cleaned = -0.00217221 Jy ! Component: 3400 - total flux cleaned = -0.00210852 Jy ! Component: 3450 - total flux cleaned = -0.00209286 Jy ! Component: 3500 - total flux cleaned = -0.0021712 Jy ! Component: 3550 - total flux cleaned = -0.00213997 Jy ! Component: 3600 - total flux cleaned = -0.00215523 Jy ! Component: 3650 - total flux cleaned = -0.00212469 Jy ! Component: 3700 - total flux cleaned = -0.0021246 Jy ! Component: 3750 - total flux cleaned = -0.00215456 Jy ! Component: 3800 - total flux cleaned = -0.00209462 Jy ! Component: 3850 - total flux cleaned = -0.00209465 Jy ! Component: 3900 - total flux cleaned = -0.00208 Jy ! Component: 3950 - total flux cleaned = -0.00203613 Jy ! Component: 4000 - total flux cleaned = -0.00197796 Jy ! Component: 4050 - total flux cleaned = -0.0019492 Jy ! Total flux subtracted in 4096 components = -0.00194916 Jy ! Clean residual min=-0.000845 max=0.000826 Jy/beam ! Clean residual mean=0.000001 rms=0.000253 Jy/beam ! Combined flux in latest and established models = 0.0835994 Jy keep ! Adding 250 model components to the UV plane model. ! The established model now contains 304 components and 0.0835993 Jy ![Exited script file: muppet] wmap "J0845-3718_S_2017_05_01_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.146 x 8.138 at -2.419 degrees (North through East) ! Clean map min=-0.0016207 max=0.077004 Jy/beam ! Writing clean map to FITS file: J0845-3718_S_2017_05_01_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.0770041 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000251143 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.978427 0.978427 1.95685 3.91371 7.82742 15.6548 31.3097 62.6193 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0007 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.077 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.146 x 8.138 at -2.419 degrees (North through East) ! Clean map min=-0.0016207 max=0.077004 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J0845-3718_S_2017_05_01_pus_uvs.log closed on Wed May 1 18:32:33 2019