! Started logfile: J0845-3347_S_2017_10_21_pus_uvs.log on Sat May 11 20:54:35 2019 obs J0845-3347_S_2017_10_21_pus_uva.fits ! Reading UV FITS file: J0845-3347_S_2017_10_21_pus_uva.fits ! AN table 1: 146 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.666286 visibilities/baseline/integration-bin. ! Found source: J0845-3347 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 644 lines of history. ! ! Reading 14008 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J0845-3347_S_2017_10_21_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 232 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 232 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 232 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 688 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.935711Jy sigma=0.006269 ! Fit after self-cal, rms=0.898786Jy sigma=0.006064 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.685 mas, bmaj=20.13 mas, bpa=-16.3 degrees ! Estimated noise=2178.38 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0748982 Jy ! Component: 100 - total flux cleaned = 0.103351 Jy ! Total flux subtracted in 100 components = 0.103351 Jy ! Clean residual min=-0.009733 max=0.013516 Jy/beam ! Clean residual mean=-0.000028 rms=0.002780 Jy/beam ! Combined flux in latest and established models = 0.103351 Jy ! Performing phase self-cal ! Adding 32 model components to the UV plane model. ! The established model now contains 32 components and 0.103351 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.125025Jy sigma=0.000748 ! Fit after self-cal, rms=0.124743Jy sigma=0.000746 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.62 mas, bmaj=22.72 mas, bpa=-15.81 degrees ! Estimated noise=1002.21 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0228716 Jy ! Component: 100 - total flux cleaned = 0.0338835 Jy ! Component: 150 - total flux cleaned = 0.0401145 Jy ! Component: 200 - total flux cleaned = 0.0438435 Jy ! Total flux subtracted in 200 components = 0.0438435 Jy ! Clean residual min=-0.005016 max=0.004775 Jy/beam ! Clean residual mean=-0.000082 rms=0.001422 Jy/beam ! Combined flux in latest and established models = 0.147194 Jy ! Performing phase self-cal ! Adding 74 model components to the UV plane model. ! The established model now contains 103 components and 0.147194 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.120981Jy sigma=0.000716 ! Fit after self-cal, rms=0.121010Jy sigma=0.000715 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.98 HN 1.13 KP 1.08 ! LA 1.00 MK 1.18 NL 0.91 OV 1.00 ! PT 0.94 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.06 HN 1.09 KP 1.06 ! LA 0.95 MK 1.11 NL 1.04 OV 1.02 ! PT 0.95 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.08 HN 1.03 KP 1.03 ! LA 0.81 MK 1.04 NL 1.23 OV 0.95 ! PT 0.87 ! ! ! Correcting IF 4. ! A total of 48 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.12 HN 0.75 KP 1.00* ! LA 0.89 MK 0.75 NL 1.00* OV 1.00* ! PT 0.84 ! ! ! Fit before self-cal, rms=0.121010Jy sigma=0.000715 ! Fit after self-cal, rms=0.119851Jy sigma=0.000708 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.633 mas, bmaj=22.79 mas, bpa=-15.75 degrees ! Estimated noise=998.191 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000375182 Jy ! Component: 100 - total flux cleaned = -0.000457166 Jy ! Component: 150 - total flux cleaned = -0.00053255 Jy ! Component: 200 - total flux cleaned = -0.000634069 Jy ! Total flux subtracted in 200 components = -0.000634069 Jy ! Clean residual min=-0.003376 max=0.002772 Jy/beam ! Clean residual mean=-0.000010 rms=0.000812 Jy/beam ! Combined flux in latest and established models = 0.14656 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 115 components and 0.14656 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.119821Jy sigma=0.000708 ! Fit after self-cal, rms=0.119962Jy sigma=0.000708 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.119962Jy sigma=0.000708 ! Fit after self-cal, rms=0.120383Jy sigma=0.000707 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.627 mas, bmaj=22.71 mas, bpa=-15.71 degrees ! Estimated noise=995.329 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000101441 Jy ! Component: 100 - total flux cleaned = -0.000164116 Jy ! Component: 150 - total flux cleaned = -0.000249439 Jy ! Component: 200 - total flux cleaned = -0.000325742 Jy ! Total flux subtracted in 200 components = -0.000325742 Jy ! Clean residual min=-0.003366 max=0.002777 Jy/beam ! Clean residual mean=-0.000014 rms=0.000792 Jy/beam ! Combined flux in latest and established models = 0.146234 Jy selfcal ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 125 components and 0.146234 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.120364Jy sigma=0.000707 ! Fit after self-cal, rms=0.120432Jy sigma=0.000707 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -3.2526e-05 Jy ! Component: 100 - total flux cleaned = -8.85726e-05 Jy ! Component: 150 - total flux cleaned = -0.00016262 Jy ! Component: 200 - total flux cleaned = -0.000230755 Jy ! Total flux subtracted in 200 components = -0.000230755 Jy ! Clean residual min=-0.003395 max=0.002835 Jy/beam ! Clean residual mean=-0.000016 rms=0.000783 Jy/beam ! Combined flux in latest and established models = 0.146004 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 128 components and 0.146003 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.120418Jy sigma=0.000707 ! Fit after self-cal, rms=0.120409Jy sigma=0.000707 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.120409Jy sigma=0.000707 ! Fit after self-cal, rms=0.120549Jy sigma=0.000707 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.627 mas, bmaj=22.7 mas, bpa=-15.71 degrees ! Estimated noise=994.486 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -7.99635e-05 Jy ! Component: 100 - total flux cleaned = -0.000130851 Jy ! Component: 150 - total flux cleaned = -0.000222129 Jy ! Component: 200 - total flux cleaned = -0.000285123 Jy ! Total flux subtracted in 200 components = -0.000285123 Jy ! Clean residual min=-0.003272 max=0.002789 Jy/beam ! Clean residual mean=-0.000014 rms=0.000779 Jy/beam ! Combined flux in latest and established models = 0.145718 Jy selfcal ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 129 components and 0.145718 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.120537Jy sigma=0.000707 ! Fit after self-cal, rms=0.120557Jy sigma=0.000707 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 9.75635e-06 Jy ! Component: 100 - total flux cleaned = -3.51035e-05 Jy ! Component: 150 - total flux cleaned = -9.65025e-05 Jy ! Component: 200 - total flux cleaned = -0.000155452 Jy ! Total flux subtracted in 200 components = -0.000155452 Jy ! Clean residual min=-0.003252 max=0.002805 Jy/beam ! Clean residual mean=-0.000015 rms=0.000774 Jy/beam ! Combined flux in latest and established models = 0.145563 Jy ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 134 components and 0.145563 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.120548Jy sigma=0.000707 ! Fit after self-cal, rms=0.120541Jy sigma=0.000707 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.120541Jy sigma=0.000707 ! Fit after self-cal, rms=0.120533Jy sigma=0.000707 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.469 mas, bmaj=39.37 mas, bpa=-7.774 degrees ! Estimated noise=1113.32 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 3.87123e-06 Jy ! Component: 100 - total flux cleaned = -4.87252e-05 Jy ! Component: 150 - total flux cleaned = -0.000113993 Jy ! Component: 200 - total flux cleaned = -0.000159292 Jy ! Total flux subtracted in 200 components = -0.000159292 Jy ! Clean residual min=-0.002684 max=0.002938 Jy/beam ! Clean residual mean=-0.000021 rms=0.000843 Jy/beam ! Combined flux in latest and established models = 0.145404 Jy selfcal ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 147 components and 0.145404 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.120527Jy sigma=0.000707 ! Fit after self-cal, rms=0.120534Jy sigma=0.000707 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 1.29307e-05 Jy ! Component: 100 - total flux cleaned = -1.88131e-05 Jy ! Component: 150 - total flux cleaned = -4.879e-05 Jy ! Component: 200 - total flux cleaned = -9.26389e-05 Jy ! Total flux subtracted in 200 components = -9.26389e-05 Jy ! Clean residual min=-0.002646 max=0.002940 Jy/beam ! Clean residual mean=-0.000022 rms=0.000836 Jy/beam ! Combined flux in latest and established models = 0.145311 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 155 components and 0.145311 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.120530Jy sigma=0.000707 ! Fit after self-cal, rms=0.120525Jy sigma=0.000707 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.627 mas, bmaj=22.7 mas, bpa=-15.71 degrees ! Estimated noise=993.808 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.627 x 22.7 at -15.71 degrees (North through East) ! Clean map min=-0.003189 max=0.10266 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.708 mas, bmaj=20 mas, bpa=-16.07 degrees ! Estimated noise=2162.56 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.072483 Jy ! Component: 100 - total flux cleaned = 0.101266 Jy ! Component: 150 - total flux cleaned = 0.117277 Jy ! Component: 200 - total flux cleaned = 0.12682 Jy ! Total flux subtracted in 200 components = 0.12682 Jy ! Clean residual min=-0.007397 max=0.005682 Jy/beam ! Clean residual mean=-0.000021 rms=0.001858 Jy/beam ! Combined flux in latest and established models = 0.12682 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 51 model components to the UV plane model. ! The established model now contains 51 components and 0.12682 Jy ! Inverting map and beam ! Estimated beam: bmin=3.627 mas, bmaj=22.7 mas, bpa=-15.71 degrees ! Estimated noise=993.808 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00969728 Jy ! Component: 100 - total flux cleaned = 0.0141818 Jy ! Component: 150 - total flux cleaned = 0.0166002 Jy ! Component: 200 - total flux cleaned = 0.0180044 Jy ! Total flux subtracted in 200 components = 0.0180044 Jy ! Clean residual min=-0.003512 max=0.002866 Jy/beam ! Clean residual mean=-0.000017 rms=0.000811 Jy/beam ! Combined flux in latest and established models = 0.144825 Jy ! Adding 49 model components to the UV plane model. ! The established model now contains 97 components and 0.144825 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.469 mas, bmaj=39.37 mas, bpa=-7.774 degrees ! Estimated noise=1113.32 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000509524 Jy ! Component: 100 - total flux cleaned = 0.000653438 Jy ! Component: 150 - total flux cleaned = 0.000742003 Jy ! Component: 200 - total flux cleaned = 0.000714095 Jy ! Total flux subtracted in 200 components = 0.000714095 Jy ! Clean residual min=-0.002939 max=0.002947 Jy/beam ! Clean residual mean=-0.000022 rms=0.000870 Jy/beam ! Combined flux in latest and established models = 0.145539 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -2.55198e-05 Jy ! Component: 100 - total flux cleaned = -5.07658e-05 Jy ! Component: 150 - total flux cleaned = -7.32738e-05 Jy ! Component: 200 - total flux cleaned = -9.62297e-05 Jy ! Total flux subtracted in 200 components = -9.62297e-05 Jy ! Clean residual min=-0.002865 max=0.002941 Jy/beam ! Clean residual mean=-0.000023 rms=0.000861 Jy/beam ! Combined flux in latest and established models = 0.145443 Jy ! Adding 30 model components to the UV plane model. ! The established model now contains 127 components and 0.145443 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.627 mas, bmaj=22.7 mas, bpa=-15.71 degrees ! Estimated noise=993.808 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00024957 Jy ! Component: 100 - total flux cleaned = -0.000297284 Jy ! Component: 150 - total flux cleaned = -0.000297892 Jy ! Component: 200 - total flux cleaned = -0.000297735 Jy ! Total flux subtracted in 200 components = -0.000297735 Jy ! Clean residual min=-0.003307 max=0.002973 Jy/beam ! Clean residual mean=-0.000015 rms=0.000789 Jy/beam ! Combined flux in latest and established models = 0.145145 Jy selfcal ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 140 components and 0.145145 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.120546Jy sigma=0.000707 ! Fit after self-cal, rms=0.120501Jy sigma=0.000707 wmodel J0845-3347_S_2017_10_21_pus_map.mod ! Writing 140 model components to file: J0845-3347_S_2017_10_21_pus_map.mod wobs J0845-3347_S_2017_10_21_pus_uvs.fits ! Writing UV FITS file: J0845-3347_S_2017_10_21_pus_uvs.fits wwins J0845-3347_S_2017_10_21_pus_map.win ! wwins: Wrote 1 windows to J0845-3347_S_2017_10_21_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.0011222 Jy ! Component: 100 - total flux cleaned = -0.00112278 Jy ! Component: 150 - total flux cleaned = -0.000983726 Jy ! Component: 200 - total flux cleaned = -0.0012447 Jy ! Component: 250 - total flux cleaned = -0.00157433 Jy ! Component: 300 - total flux cleaned = -0.00192543 Jy ! Component: 350 - total flux cleaned = -0.00214749 Jy ! Component: 400 - total flux cleaned = -0.00236022 Jy ! Component: 450 - total flux cleaned = -0.00259657 Jy ! Component: 500 - total flux cleaned = -0.0027261 Jy ! Component: 550 - total flux cleaned = -0.00294363 Jy ! Component: 600 - total flux cleaned = -0.00303399 Jy ! Component: 650 - total flux cleaned = -0.00309196 Jy ! Component: 700 - total flux cleaned = -0.00317469 Jy ! Component: 750 - total flux cleaned = -0.00325568 Jy ! Component: 800 - total flux cleaned = -0.00336002 Jy ! Component: 850 - total flux cleaned = -0.00336077 Jy ! Component: 900 - total flux cleaned = -0.00340989 Jy ! Component: 950 - total flux cleaned = -0.00352819 Jy ! Component: 1000 - total flux cleaned = -0.00364334 Jy ! Component: 1050 - total flux cleaned = -0.0037334 Jy ! Component: 1100 - total flux cleaned = -0.00391075 Jy ! Component: 1150 - total flux cleaned = -0.00406289 Jy ! Component: 1200 - total flux cleaned = -0.00423273 Jy ! Component: 1250 - total flux cleaned = -0.00435778 Jy ! Component: 1300 - total flux cleaned = -0.00443978 Jy ! Component: 1350 - total flux cleaned = -0.0044802 Jy ! Component: 1400 - total flux cleaned = -0.00457885 Jy ! Component: 1450 - total flux cleaned = -0.00463688 Jy ! Component: 1500 - total flux cleaned = -0.00469403 Jy ! Component: 1550 - total flux cleaned = -0.00478774 Jy ! Component: 1600 - total flux cleaned = -0.00482412 Jy ! Component: 1650 - total flux cleaned = -0.00489662 Jy ! Component: 1700 - total flux cleaned = -0.00495012 Jy ! Component: 1750 - total flux cleaned = -0.00500318 Jy ! Component: 1800 - total flux cleaned = -0.00507225 Jy ! Component: 1850 - total flux cleaned = -0.00514009 Jy ! Component: 1900 - total flux cleaned = -0.0051399 Jy ! Component: 1950 - total flux cleaned = -0.00517263 Jy ! Component: 2000 - total flux cleaned = -0.00515681 Jy ! Component: 2050 - total flux cleaned = -0.00520459 Jy ! Component: 2100 - total flux cleaned = -0.00515746 Jy ! Component: 2150 - total flux cleaned = -0.00518859 Jy ! Component: 2200 - total flux cleaned = -0.00515811 Jy ! Component: 2250 - total flux cleaned = -0.0052486 Jy ! Component: 2300 - total flux cleaned = -0.00520364 Jy ! Component: 2350 - total flux cleaned = -0.005189 Jy ! Component: 2400 - total flux cleaned = -0.00517457 Jy ! Component: 2450 - total flux cleaned = -0.00523182 Jy ! Component: 2500 - total flux cleaned = -0.00517524 Jy ! Component: 2550 - total flux cleaned = -0.00521729 Jy ! Component: 2600 - total flux cleaned = -0.00520326 Jy ! Component: 2650 - total flux cleaned = -0.00520342 Jy ! Component: 2700 - total flux cleaned = -0.00520329 Jy ! Component: 2750 - total flux cleaned = -0.00527032 Jy ! Component: 2800 - total flux cleaned = -0.00531011 Jy ! Component: 2850 - total flux cleaned = -0.0053233 Jy ! Component: 2900 - total flux cleaned = -0.0053885 Jy ! Component: 2950 - total flux cleaned = -0.00542717 Jy ! Component: 3000 - total flux cleaned = -0.00547847 Jy ! Component: 3050 - total flux cleaned = -0.00551655 Jy ! Component: 3100 - total flux cleaned = -0.00554176 Jy ! Component: 3150 - total flux cleaned = -0.00557915 Jy ! Component: 3200 - total flux cleaned = -0.00559145 Jy ! Component: 3250 - total flux cleaned = -0.00564064 Jy ! Component: 3300 - total flux cleaned = -0.00566501 Jy ! Component: 3350 - total flux cleaned = -0.00570141 Jy ! Component: 3400 - total flux cleaned = -0.00568925 Jy ! Component: 3450 - total flux cleaned = -0.00572522 Jy ! Component: 3500 - total flux cleaned = -0.00574914 Jy ! Component: 3550 - total flux cleaned = -0.00576109 Jy ! Component: 3600 - total flux cleaned = -0.00578464 Jy ! Component: 3650 - total flux cleaned = -0.00579636 Jy ! Component: 3700 - total flux cleaned = -0.00580798 Jy ! Component: 3750 - total flux cleaned = -0.00584271 Jy ! Component: 3800 - total flux cleaned = -0.00586577 Jy ! Component: 3850 - total flux cleaned = -0.00585429 Jy ! Component: 3900 - total flux cleaned = -0.00585426 Jy ! Component: 3950 - total flux cleaned = -0.00586556 Jy ! Component: 4000 - total flux cleaned = -0.00586549 Jy ! Component: 4050 - total flux cleaned = -0.00587672 Jy ! Total flux subtracted in 4096 components = -0.00584317 Jy ! Clean residual min=-0.000630 max=0.000614 Jy/beam ! Clean residual mean=-0.000003 rms=0.000219 Jy/beam ! Combined flux in latest and established models = 0.139302 Jy keep ! Adding 296 model components to the UV plane model. ! The established model now contains 436 components and 0.139302 Jy ![Exited script file: muppet] wmap "J0845-3347_S_2017_10_21_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.627 x 22.7 at -15.71 degrees (North through East) ! Clean map min=-0.0018764 max=0.10233 Jy/beam ! Writing clean map to FITS file: J0845-3347_S_2017_10_21_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.102328 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.00021026 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.616427 0.616427 1.23285 2.46571 4.93141 9.86282 19.7256 39.4513 78.9026 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0006 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.102 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.627 x 22.7 at -15.71 degrees (North through East) ! Clean map min=-0.0018764 max=0.10233 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J0845-3347_S_2017_10_21_pus_uvs.log closed on Sat May 11 20:54:40 2019