! Started logfile: J0845-3347_S_2017_10_09_pus_uvs.log on Sun May 12 13:08:05 2019 obs J0845-3347_S_2017_10_09_pus_uva.fits ! Reading UV FITS file: J0845-3347_S_2017_10_09_pus_uva.fits ! AN table 1: 73 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.759132 visibilities/baseline/integration-bin. ! Found source: J0845-3347 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 496 lines of history. ! ! Reading 7980 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J0845-3347_S_2017_10_09_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 81 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 121 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 81 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 375 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.961833Jy sigma=0.006256 ! Fit after self-cal, rms=0.919907Jy sigma=0.005995 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.478 mas, bmaj=14.4 mas, bpa=-24.94 degrees ! Estimated noise=2476.97 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0615095 Jy ! Component: 100 - total flux cleaned = 0.0840555 Jy ! Total flux subtracted in 100 components = 0.0840555 Jy ! Clean residual min=-0.010458 max=0.014361 Jy/beam ! Clean residual mean=0.000100 rms=0.003753 Jy/beam ! Combined flux in latest and established models = 0.0840556 Jy ! Performing phase self-cal ! Adding 34 model components to the UV plane model. ! The established model now contains 34 components and 0.0840556 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.111019Jy sigma=0.000693 ! Fit after self-cal, rms=0.110617Jy sigma=0.000690 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3 mas, bmaj=14.82 mas, bpa=-23.81 degrees ! Estimated noise=1402.24 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0225434 Jy ! Component: 100 - total flux cleaned = 0.0363071 Jy ! Component: 150 - total flux cleaned = 0.0453387 Jy ! Component: 200 - total flux cleaned = 0.051358 Jy ! Total flux subtracted in 200 components = 0.051358 Jy ! Clean residual min=-0.007138 max=0.012214 Jy/beam ! Clean residual mean=0.000005 rms=0.002887 Jy/beam ! Combined flux in latest and established models = 0.135414 Jy ! Performing phase self-cal ! Adding 59 model components to the UV plane model. ! The established model now contains 87 components and 0.135414 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.105397Jy sigma=0.000655 ! Fit after self-cal, rms=0.105027Jy sigma=0.000653 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.13 FD 0.87 HN 1.13 KP 1.01 ! LA 0.97 MK 1.07 NL 0.94 OV 1.00* ! PT 0.93 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.97 FD 0.92 HN 0.96 KP 0.88 ! LA 0.94 MK 1.13 NL 1.14 OV 1.00* ! PT 0.85 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.98 FD 0.96 HN 0.89 KP 0.90 ! LA 0.71 MK 1.24 NL 1.23 OV 1.00* ! PT 0.88 ! ! ! Correcting IF 4. ! A total of 6 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.94 HN 0.86 KP 1.00* ! LA 1.00* MK 0.88 NL 1.00* OV 1.00* ! PT 0.93 ! ! ! Fit before self-cal, rms=0.105027Jy sigma=0.000653 ! Fit after self-cal, rms=0.116390Jy sigma=0.000636 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.055 mas, bmaj=15.54 mas, bpa=-23.36 degrees ! Estimated noise=1431.71 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000956604 Jy ! Component: 100 - total flux cleaned = 0.0010186 Jy ! Component: 150 - total flux cleaned = 0.00107502 Jy ! Component: 200 - total flux cleaned = 0.00102389 Jy ! Total flux subtracted in 200 components = 0.00102389 Jy ! Clean residual min=-0.003733 max=0.004684 Jy/beam ! Clean residual mean=-0.000004 rms=0.001088 Jy/beam ! Combined flux in latest and established models = 0.136437 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 103 components and 0.136437 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.116309Jy sigma=0.000636 ! Fit after self-cal, rms=0.116937Jy sigma=0.000634 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.116937Jy sigma=0.000634 ! Fit after self-cal, rms=0.121979Jy sigma=0.000634 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.047 mas, bmaj=15.6 mas, bpa=-23.39 degrees ! Estimated noise=1440.04 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000732458 Jy ! Component: 100 - total flux cleaned = 0.000732618 Jy ! Component: 150 - total flux cleaned = 0.00073378 Jy ! Component: 200 - total flux cleaned = 0.000701947 Jy ! Total flux subtracted in 200 components = 0.000701947 Jy ! Clean residual min=-0.003466 max=0.003412 Jy/beam ! Clean residual mean=-0.000003 rms=0.000891 Jy/beam ! Combined flux in latest and established models = 0.137139 Jy selfcal ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 114 components and 0.137139 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.121942Jy sigma=0.000634 ! Fit after self-cal, rms=0.121987Jy sigma=0.000634 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000183202 Jy ! Component: 100 - total flux cleaned = 4.19953e-05 Jy ! Component: 150 - total flux cleaned = -1.94058e-05 Jy ! Component: 200 - total flux cleaned = -0.000131442 Jy ! Total flux subtracted in 200 components = -0.000131442 Jy ! Clean residual min=-0.003478 max=0.003328 Jy/beam ! Clean residual mean=-0.000003 rms=0.000883 Jy/beam ! Combined flux in latest and established models = 0.137008 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 117 components and 0.137008 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.121964Jy sigma=0.000634 ! Fit after self-cal, rms=0.121921Jy sigma=0.000633 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.121921Jy sigma=0.000633 ! Fit after self-cal, rms=0.123607Jy sigma=0.000633 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.036 mas, bmaj=15.64 mas, bpa=-23.49 degrees ! Estimated noise=1447.95 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000680308 Jy ! Component: 100 - total flux cleaned = 0.00079028 Jy ! Component: 150 - total flux cleaned = 0.000852217 Jy ! Component: 200 - total flux cleaned = 0.000935405 Jy ! Total flux subtracted in 200 components = 0.000935405 Jy ! Clean residual min=-0.003666 max=0.003260 Jy/beam ! Clean residual mean=-0.000003 rms=0.000887 Jy/beam ! Combined flux in latest and established models = 0.137943 Jy selfcal ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 123 components and 0.137943 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.123578Jy sigma=0.000633 ! Fit after self-cal, rms=0.123567Jy sigma=0.000633 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00013381 Jy ! Component: 100 - total flux cleaned = 7.98426e-05 Jy ! Component: 150 - total flux cleaned = 8.02222e-05 Jy ! Component: 200 - total flux cleaned = 5.60898e-05 Jy ! Total flux subtracted in 200 components = 5.60898e-05 Jy ! Clean residual min=-0.003671 max=0.003239 Jy/beam ! Clean residual mean=-0.000003 rms=0.000892 Jy/beam ! Combined flux in latest and established models = 0.137999 Jy ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 126 components and 0.137999 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.123549Jy sigma=0.000633 ! Fit after self-cal, rms=0.123533Jy sigma=0.000633 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.123533Jy sigma=0.000633 ! Fit after self-cal, rms=0.124713Jy sigma=0.000633 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.717 mas, bmaj=32.78 mas, bpa=-10.01 degrees ! Estimated noise=1810.8 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000634462 Jy ! Component: 100 - total flux cleaned = 0.000708205 Jy ! Component: 150 - total flux cleaned = 0.000750403 Jy ! Component: 200 - total flux cleaned = 0.000750445 Jy ! Total flux subtracted in 200 components = 0.000750445 Jy ! Clean residual min=-0.003834 max=0.002632 Jy/beam ! Clean residual mean=-0.000007 rms=0.000926 Jy/beam ! Combined flux in latest and established models = 0.13875 Jy selfcal ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 132 components and 0.13875 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.124712Jy sigma=0.000633 ! Fit after self-cal, rms=0.124705Jy sigma=0.000633 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -4.32268e-05 Jy ! Component: 100 - total flux cleaned = -6.20155e-05 Jy ! Component: 150 - total flux cleaned = -6.12803e-05 Jy ! Component: 200 - total flux cleaned = -9.48336e-05 Jy ! Total flux subtracted in 200 components = -9.48336e-05 Jy ! Clean residual min=-0.003783 max=0.002664 Jy/beam ! Clean residual mean=-0.000007 rms=0.000926 Jy/beam ! Combined flux in latest and established models = 0.138655 Jy ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 134 components and 0.138655 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.124703Jy sigma=0.000633 ! Fit after self-cal, rms=0.124694Jy sigma=0.000633 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.031 mas, bmaj=15.7 mas, bpa=-23.59 degrees ! Estimated noise=1456.46 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.031 x 15.7 at -23.59 degrees (North through East) ! Clean map min=-0.0033957 max=0.077993 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.507 mas, bmaj=14.9 mas, bpa=-24.78 degrees ! Estimated noise=2537.03 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0619525 Jy ! Component: 100 - total flux cleaned = 0.0864868 Jy ! Component: 150 - total flux cleaned = 0.101978 Jy ! Component: 200 - total flux cleaned = 0.112319 Jy ! Total flux subtracted in 200 components = 0.112319 Jy ! Clean residual min=-0.006368 max=0.007040 Jy/beam ! Clean residual mean=0.000050 rms=0.002005 Jy/beam ! Combined flux in latest and established models = 0.112319 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 48 model components to the UV plane model. ! The established model now contains 48 components and 0.112319 Jy ! Inverting map and beam ! Estimated beam: bmin=3.031 mas, bmaj=15.7 mas, bpa=-23.59 degrees ! Estimated noise=1456.46 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0102084 Jy ! Component: 100 - total flux cleaned = 0.0158035 Jy ! Component: 150 - total flux cleaned = 0.0191345 Jy ! Component: 200 - total flux cleaned = 0.0211835 Jy ! Total flux subtracted in 200 components = 0.0211835 Jy ! Clean residual min=-0.003878 max=0.003887 Jy/beam ! Clean residual mean=-0.000004 rms=0.000987 Jy/beam ! Combined flux in latest and established models = 0.133503 Jy ! Adding 46 model components to the UV plane model. ! The established model now contains 86 components and 0.133503 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.717 mas, bmaj=32.78 mas, bpa=-10.01 degrees ! Estimated noise=1810.8 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0019333 Jy ! Component: 100 - total flux cleaned = 0.00216953 Jy ! Component: 150 - total flux cleaned = 0.00227677 Jy ! Component: 200 - total flux cleaned = 0.00230667 Jy ! Total flux subtracted in 200 components = 0.00230667 Jy ! Clean residual min=-0.003554 max=0.003675 Jy/beam ! Clean residual mean=-0.000011 rms=0.001044 Jy/beam ! Combined flux in latest and established models = 0.135809 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 2.42751e-05 Jy ! Component: 100 - total flux cleaned = 6.68685e-05 Jy ! Component: 150 - total flux cleaned = 0.000108656 Jy ! Component: 200 - total flux cleaned = 0.000149047 Jy ! Total flux subtracted in 200 components = 0.000149047 Jy ! Clean residual min=-0.003482 max=0.003628 Jy/beam ! Clean residual mean=-0.000011 rms=0.001028 Jy/beam ! Combined flux in latest and established models = 0.135958 Jy ! Adding 24 model components to the UV plane model. ! The established model now contains 102 components and 0.135958 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.031 mas, bmaj=15.7 mas, bpa=-23.59 degrees ! Estimated noise=1456.46 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 5.81094e-05 Jy ! Component: 100 - total flux cleaned = 2.39588e-05 Jy ! Component: 150 - total flux cleaned = 5.12261e-05 Jy ! Component: 200 - total flux cleaned = 5.15944e-05 Jy ! Total flux subtracted in 200 components = 5.15944e-05 Jy ! Clean residual min=-0.003443 max=0.003682 Jy/beam ! Clean residual mean=-0.000006 rms=0.000915 Jy/beam ! Combined flux in latest and established models = 0.13601 Jy selfcal ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 113 components and 0.13601 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.124691Jy sigma=0.000633 ! Fit after self-cal, rms=0.124680Jy sigma=0.000633 wmodel J0845-3347_S_2017_10_09_pus_map.mod ! Writing 113 model components to file: J0845-3347_S_2017_10_09_pus_map.mod wobs J0845-3347_S_2017_10_09_pus_uvs.fits ! Writing UV FITS file: J0845-3347_S_2017_10_09_pus_uvs.fits wwins J0845-3347_S_2017_10_09_pus_map.win ! wwins: Wrote 1 windows to J0845-3347_S_2017_10_09_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000266535 Jy ! Component: 100 - total flux cleaned = -0.000773455 Jy ! Component: 150 - total flux cleaned = -0.000927788 Jy ! Component: 200 - total flux cleaned = -0.000830564 Jy ! Component: 250 - total flux cleaned = -0.000648585 Jy ! Component: 300 - total flux cleaned = -0.000519536 Jy ! Component: 350 - total flux cleaned = -0.000519014 Jy ! Component: 400 - total flux cleaned = -0.000518087 Jy ! Component: 450 - total flux cleaned = -0.000517824 Jy ! Component: 500 - total flux cleaned = -0.000517443 Jy ! Component: 550 - total flux cleaned = -0.000516816 Jy ! Component: 600 - total flux cleaned = -0.000548633 Jy ! Component: 650 - total flux cleaned = -0.000548663 Jy ! Component: 700 - total flux cleaned = -0.000490053 Jy ! Component: 750 - total flux cleaned = -0.000433341 Jy ! Component: 800 - total flux cleaned = -0.000350225 Jy ! Component: 850 - total flux cleaned = -0.000243326 Jy ! Component: 900 - total flux cleaned = -0.000113549 Jy ! Component: 950 - total flux cleaned = -1.23848e-05 Jy ! Component: 1000 - total flux cleaned = 0.000111215 Jy ! Component: 1050 - total flux cleaned = 0.000182939 Jy ! Component: 1100 - total flux cleaned = 0.000183549 Jy ! Component: 1150 - total flux cleaned = 0.000184077 Jy ! Component: 1200 - total flux cleaned = 0.000162083 Jy ! Component: 1250 - total flux cleaned = 0.000139992 Jy ! Component: 1300 - total flux cleaned = 7.4302e-05 Jy ! Component: 1350 - total flux cleaned = -1.21121e-05 Jy ! Component: 1400 - total flux cleaned = -9.7036e-05 Jy ! Component: 1450 - total flux cleaned = -0.000159759 Jy ! Component: 1500 - total flux cleaned = -0.000160167 Jy ! Component: 1550 - total flux cleaned = -0.000221501 Jy ! Component: 1600 - total flux cleaned = -0.000281895 Jy ! Component: 1650 - total flux cleaned = -0.000262182 Jy ! Component: 1700 - total flux cleaned = -0.000262417 Jy ! Component: 1750 - total flux cleaned = -0.000262412 Jy ! Component: 1800 - total flux cleaned = -0.000301009 Jy ! Component: 1850 - total flux cleaned = -0.000281715 Jy ! Component: 1900 - total flux cleaned = -0.000300671 Jy ! Component: 1950 - total flux cleaned = -0.000319456 Jy ! Component: 2000 - total flux cleaned = -0.000300597 Jy ! Component: 2050 - total flux cleaned = -0.00031908 Jy ! Component: 2100 - total flux cleaned = -0.00028211 Jy ! Component: 2150 - total flux cleaned = -0.000245456 Jy ! Component: 2200 - total flux cleaned = -0.000245226 Jy ! Component: 2250 - total flux cleaned = -0.000208906 Jy ! Component: 2300 - total flux cleaned = -0.0002452 Jy ! Component: 2350 - total flux cleaned = -0.000209016 Jy ! Component: 2400 - total flux cleaned = -0.000227109 Jy ! Component: 2450 - total flux cleaned = -0.000209025 Jy ! Component: 2500 - total flux cleaned = -0.000191038 Jy ! Component: 2550 - total flux cleaned = -0.000245102 Jy ! Component: 2600 - total flux cleaned = -0.00029909 Jy ! Component: 2650 - total flux cleaned = -0.000335152 Jy ! Component: 2700 - total flux cleaned = -0.000353125 Jy ! Component: 2750 - total flux cleaned = -0.000353129 Jy ! Component: 2800 - total flux cleaned = -0.000353317 Jy ! Component: 2850 - total flux cleaned = -0.000371472 Jy ! Component: 2900 - total flux cleaned = -0.000389488 Jy ! Component: 2950 - total flux cleaned = -0.000425826 Jy ! Component: 3000 - total flux cleaned = -0.000480554 Jy ! Component: 3050 - total flux cleaned = -0.000517019 Jy ! Component: 3100 - total flux cleaned = -0.000627358 Jy ! Component: 3150 - total flux cleaned = -0.000645787 Jy ! Component: 3200 - total flux cleaned = -0.000719979 Jy ! Component: 3250 - total flux cleaned = -0.000794821 Jy ! Component: 3300 - total flux cleaned = -0.000851232 Jy ! Component: 3350 - total flux cleaned = -0.000870106 Jy ! Component: 3400 - total flux cleaned = -0.000965204 Jy ! Component: 3450 - total flux cleaned = -0.00102258 Jy ! Component: 3500 - total flux cleaned = -0.000983993 Jy ! Component: 3550 - total flux cleaned = -0.000964523 Jy ! Component: 3600 - total flux cleaned = -0.000925099 Jy ! Component: 3650 - total flux cleaned = -0.000905284 Jy ! Component: 3700 - total flux cleaned = -0.000805048 Jy ! Component: 3750 - total flux cleaned = -0.000805123 Jy ! Component: 3800 - total flux cleaned = -0.000723196 Jy ! Component: 3850 - total flux cleaned = -0.000702543 Jy ! Component: 3900 - total flux cleaned = -0.000597675 Jy ! Component: 3950 - total flux cleaned = -0.000533913 Jy ! Component: 4000 - total flux cleaned = -0.000469229 Jy ! Component: 4050 - total flux cleaned = -0.000381994 Jy ! Total flux subtracted in 4096 components = -0.000271396 Jy ! Clean residual min=-0.001271 max=0.001230 Jy/beam ! Clean residual mean=-0.000005 rms=0.000348 Jy/beam ! Combined flux in latest and established models = 0.135738 Jy keep ! Adding 216 model components to the UV plane model. ! The established model now contains 329 components and 0.135738 Jy ![Exited script file: muppet] wmap "J0845-3347_S_2017_10_09_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.031 x 15.7 at -23.59 degrees (North through East) ! Clean map min=-0.0040754 max=0.080079 Jy/beam ! Writing clean map to FITS file: J0845-3347_S_2017_10_09_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.0800793 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000332042 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -1.24392 1.24392 2.48785 4.97569 9.95139 19.9028 39.8055 79.6111 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0009 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.08 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.031 x 15.7 at -23.59 degrees (North through East) ! Clean map min=-0.0040754 max=0.080079 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J0845-3347_S_2017_10_09_pus_uvs.log closed on Sun May 12 13:08:11 2019