! Started logfile: J0845-3347_S_2017_05_01_pus_uvs.log on Wed May 1 18:32:23 2019 obs J0845-3347_S_2017_05_01_pus_uva.fits ! Reading UV FITS file: J0845-3347_S_2017_05_01_pus_uva.fits ! AN table 1: 147 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.656689 visibilities/baseline/integration-bin. ! Found source: J0845-3347 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 788 lines of history. ! ! Reading 17376 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J0845-3347_S_2017_05_01_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 459 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 433 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 459 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 917 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.904859Jy sigma=0.023697 ! Fit after self-cal, rms=0.885188Jy sigma=0.023682 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.62 mas, bmaj=7.468 mas, bpa=-7.013 degrees ! Estimated noise=1406.8 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0564206 Jy ! Component: 100 - total flux cleaned = 0.0743013 Jy ! Total flux subtracted in 100 components = 0.0743013 Jy ! Clean residual min=-0.021923 max=0.022140 Jy/beam ! Clean residual mean=0.000350 rms=0.007859 Jy/beam ! Combined flux in latest and established models = 0.0743013 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 10 components and 0.0743013 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.147133Jy sigma=0.001733 ! Fit after self-cal, rms=0.147091Jy sigma=0.001726 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.461 mas, bmaj=9.442 mas, bpa=-5.191 degrees ! Estimated noise=733.844 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0146268 Jy ! Component: 100 - total flux cleaned = 0.0200528 Jy ! Component: 150 - total flux cleaned = 0.0211389 Jy ! Component: 200 - total flux cleaned = 0.0212264 Jy ! Total flux subtracted in 200 components = 0.0212264 Jy ! Clean residual min=-0.025166 max=0.029949 Jy/beam ! Clean residual mean=0.001395 rms=0.010486 Jy/beam ! Combined flux in latest and established models = 0.0955277 Jy ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 27 components and 0.0955277 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.140490Jy sigma=0.002099 ! Fit after self-cal, rms=0.140487Jy sigma=0.002099 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.74 FD 0.69 HN 1.00* KP 0.76 ! LA 0.72 MK 0.95 NL 0.80 OV 0.80 ! PT 0.73 SC 1.21 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 0.76 FD 0.73 HN 1.15 KP 0.71 ! LA 0.72 MK 0.93 NL 0.85 OV 0.83 ! PT 0.72 SC 1.17 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.80 FD 0.77 HN 1.00* KP 0.73 ! LA 0.71 MK 0.89 NL 0.81 OV 0.75 ! PT 0.70 SC 1.19 ! ! ! Correcting IF 4. ! A total of 6 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.01 FD 0.93 HN 1.00* KP 1.00* ! LA 20.96 MK 0.85 NL 1.00* OV 1.00* ! PT 0.87 SC 1.00* ! ! ! Fit before self-cal, rms=0.140487Jy sigma=0.002099 ! Fit after self-cal, rms=0.480419Jy sigma=0.000677 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.568 mas, bmaj=8.937 mas, bpa=-4.182 degrees ! Estimated noise=740.611 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00220219 Jy ! Component: 100 - total flux cleaned = 0.00296712 Jy ! Component: 150 - total flux cleaned = 0.0030545 Jy ! Component: 200 - total flux cleaned = 0.00309405 Jy ! Total flux subtracted in 200 components = 0.00309405 Jy ! Clean residual min=-0.002807 max=0.003453 Jy/beam ! Clean residual mean=-0.000003 rms=0.000912 Jy/beam ! Combined flux in latest and established models = 0.0986218 Jy ! Performing phase self-cal ! Adding 6 model components to the UV plane model. ! The established model now contains 32 components and 0.0986218 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.480181Jy sigma=0.000677 ! Fit after self-cal, rms=0.481020Jy sigma=0.000670 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.481020Jy sigma=0.000670 ! Fit after self-cal, rms=0.590248Jy sigma=0.000667 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.561 mas, bmaj=9.028 mas, bpa=-3.905 degrees ! Estimated noise=746.794 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00164357 Jy ! Component: 100 - total flux cleaned = 0.0021377 Jy ! Component: 150 - total flux cleaned = 0.00219312 Jy ! Component: 200 - total flux cleaned = 0.00222713 Jy ! Total flux subtracted in 200 components = 0.00222713 Jy ! Clean residual min=-0.002682 max=0.003030 Jy/beam ! Clean residual mean=-0.000013 rms=0.000852 Jy/beam ! Combined flux in latest and established models = 0.100849 Jy selfcal ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 39 components and 0.100849 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.590074Jy sigma=0.000668 ! Fit after self-cal, rms=0.590115Jy sigma=0.000667 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 6.62855e-05 Jy ! Component: 100 - total flux cleaned = 5.03634e-05 Jy ! Component: 150 - total flux cleaned = 6.52731e-05 Jy ! Component: 200 - total flux cleaned = 7.94627e-05 Jy ! Total flux subtracted in 200 components = 7.94627e-05 Jy ! Clean residual min=-0.002583 max=0.003067 Jy/beam ! Clean residual mean=-0.000011 rms=0.000850 Jy/beam ! Combined flux in latest and established models = 0.100928 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 42 components and 0.100928 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.590108Jy sigma=0.000667 ! Fit after self-cal, rms=0.590108Jy sigma=0.000667 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.590108Jy sigma=0.000667 ! Fit after self-cal, rms=0.095224Jy sigma=0.000658 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.551 mas, bmaj=9.105 mas, bpa=-3.893 degrees ! Estimated noise=747.387 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000123533 Jy ! Component: 100 - total flux cleaned = 0.000123468 Jy ! Component: 150 - total flux cleaned = 0.000142798 Jy ! Component: 200 - total flux cleaned = 0.000142448 Jy ! Total flux subtracted in 200 components = 0.000142448 Jy ! Clean residual min=-0.002046 max=0.002352 Jy/beam ! Clean residual mean=-0.000015 rms=0.000530 Jy/beam ! Combined flux in latest and established models = 0.101071 Jy selfcal ! Performing phase self-cal ! Adding 6 model components to the UV plane model. ! The established model now contains 44 components and 0.101071 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.095215Jy sigma=0.000658 ! Fit after self-cal, rms=0.095094Jy sigma=0.000657 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-6.5, 13.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00210175 Jy ! Component: 100 - total flux cleaned = 0.00245969 Jy ! Component: 150 - total flux cleaned = 0.00245951 Jy ! Component: 200 - total flux cleaned = 0.00242901 Jy ! Total flux subtracted in 200 components = 0.00242901 Jy ! Clean residual min=-0.001780 max=0.001769 Jy/beam ! Clean residual mean=-0.000008 rms=0.000478 Jy/beam ! Combined flux in latest and established models = 0.1035 Jy ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 63 components and 0.1035 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.095036Jy sigma=0.000657 ! Fit after self-cal, rms=0.095028Jy sigma=0.000657 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.095028Jy sigma=0.000657 ! Fit after self-cal, rms=0.094190Jy sigma=0.000656 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=9.377 mas, bmaj=25.91 mas, bpa=1.801 degrees ! Estimated noise=840.416 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00117185 Jy ! Component: 100 - total flux cleaned = 0.00147146 Jy ! Component: 150 - total flux cleaned = 0.00153191 Jy ! Component: 200 - total flux cleaned = 0.00154252 Jy ! Total flux subtracted in 200 components = 0.00154252 Jy ! Clean residual min=-0.001994 max=0.001688 Jy/beam ! Clean residual mean=-0.000011 rms=0.000491 Jy/beam ! Combined flux in latest and established models = 0.105042 Jy selfcal ! Performing phase self-cal ! Adding 30 model components to the UV plane model. ! The established model now contains 91 components and 0.105042 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.094185Jy sigma=0.000656 ! Fit after self-cal, rms=0.094173Jy sigma=0.000656 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000288559 Jy ! Component: 100 - total flux cleaned = 0.000302302 Jy ! Component: 150 - total flux cleaned = 0.000303201 Jy ! Component: 200 - total flux cleaned = 0.000303281 Jy ! Total flux subtracted in 200 components = 0.000303281 Jy ! Clean residual min=-0.002022 max=0.001708 Jy/beam ! Clean residual mean=-0.000009 rms=0.000491 Jy/beam ! Combined flux in latest and established models = 0.105346 Jy ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 112 components and 0.105346 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.094171Jy sigma=0.000656 ! Fit after self-cal, rms=0.094173Jy sigma=0.000656 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.526 mas, bmaj=9.069 mas, bpa=-4.096 degrees ! Estimated noise=743.677 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.526 x 9.069 at -4.096 degrees (North through East) ! Clean map min=-0.0016639 max=0.079708 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.632 mas, bmaj=6.97 mas, bpa=-6.262 degrees ! Estimated noise=1471.14 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0592128 Jy ! Component: 100 - total flux cleaned = 0.0787445 Jy ! Component: 150 - total flux cleaned = 0.0888348 Jy ! Component: 200 - total flux cleaned = 0.0945329 Jy ! Total flux subtracted in 200 components = 0.0945329 Jy ! Clean residual min=-0.003288 max=0.003107 Jy/beam ! Clean residual mean=-0.000016 rms=0.000875 Jy/beam ! Combined flux in latest and established models = 0.094533 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 38 model components to the UV plane model. ! The established model now contains 38 components and 0.094533 Jy ! Inverting map and beam ! Estimated beam: bmin=3.526 mas, bmaj=9.069 mas, bpa=-4.096 degrees ! Estimated noise=743.677 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00492459 Jy ! Component: 100 - total flux cleaned = 0.00738552 Jy ! Component: 150 - total flux cleaned = 0.00894413 Jy ! Component: 200 - total flux cleaned = 0.00994497 Jy ! Total flux subtracted in 200 components = 0.00994497 Jy ! Clean residual min=-0.001820 max=0.001948 Jy/beam ! Clean residual mean=-0.000009 rms=0.000458 Jy/beam ! Combined flux in latest and established models = 0.104478 Jy ! Adding 32 model components to the UV plane model. ! The established model now contains 67 components and 0.104478 Jy ! Inverting map ! Added new window around map position (-51, 65). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0015648 Jy ! Component: 100 - total flux cleaned = 0.00162802 Jy ! Component: 150 - total flux cleaned = 0.00168886 Jy ! Component: 200 - total flux cleaned = 0.00174633 Jy ! Total flux subtracted in 200 components = 0.00174633 Jy ! Clean residual min=-0.001757 max=0.001433 Jy/beam ! Clean residual mean=-0.000004 rms=0.000432 Jy/beam ! Combined flux in latest and established models = 0.106224 Jy ! Adding 24 model components to the UV plane model. ! The established model now contains 89 components and 0.106224 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=9.377 mas, bmaj=25.91 mas, bpa=1.801 degrees ! Estimated noise=840.416 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00046643 Jy ! Component: 100 - total flux cleaned = 0.000565543 Jy ! Component: 150 - total flux cleaned = 0.000615768 Jy ! Component: 200 - total flux cleaned = 0.000691088 Jy ! Total flux subtracted in 200 components = 0.000691088 Jy ! Clean residual min=-0.001953 max=0.001376 Jy/beam ! Clean residual mean=-0.000003 rms=0.000455 Jy/beam ! Combined flux in latest and established models = 0.106915 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 5.34669e-05 Jy ! Component: 100 - total flux cleaned = 7.80904e-05 Jy ! Component: 150 - total flux cleaned = 0.000112702 Jy ! Component: 200 - total flux cleaned = 0.000144922 Jy ! Total flux subtracted in 200 components = 0.000144922 Jy ! Clean residual min=-0.001951 max=0.001379 Jy/beam ! Clean residual mean=-0.000002 rms=0.000450 Jy/beam ! Combined flux in latest and established models = 0.10706 Jy ! Adding 27 model components to the UV plane model. ! The established model now contains 114 components and 0.10706 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.526 mas, bmaj=9.069 mas, bpa=-4.096 degrees ! Estimated noise=743.677 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000403905 Jy ! Component: 100 - total flux cleaned = -0.000429762 Jy ! Component: 150 - total flux cleaned = -0.000428529 Jy ! Component: 200 - total flux cleaned = -0.00045074 Jy ! Total flux subtracted in 200 components = -0.00045074 Jy ! Clean residual min=-0.001737 max=0.001422 Jy/beam ! Clean residual mean=-0.000003 rms=0.000414 Jy/beam ! Combined flux in latest and established models = 0.10661 Jy selfcal ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 130 components and 0.10661 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.094100Jy sigma=0.000656 ! Fit after self-cal, rms=0.094092Jy sigma=0.000656 wmodel J0845-3347_S_2017_05_01_pus_map.mod ! Writing 130 model components to file: J0845-3347_S_2017_05_01_pus_map.mod wobs J0845-3347_S_2017_05_01_pus_uvs.fits ! Writing UV FITS file: J0845-3347_S_2017_05_01_pus_uvs.fits wwins J0845-3347_S_2017_05_01_pus_map.win ! wwins: Wrote 3 windows to J0845-3347_S_2017_05_01_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.00076994 Jy ! Component: 100 - total flux cleaned = -0.00133344 Jy ! Component: 150 - total flux cleaned = -0.00170667 Jy ! Component: 200 - total flux cleaned = -0.00208971 Jy ! Component: 250 - total flux cleaned = -0.00243464 Jy ! Component: 300 - total flux cleaned = -0.00264984 Jy ! Component: 350 - total flux cleaned = -0.00292927 Jy ! Component: 400 - total flux cleaned = -0.00311151 Jy ! Component: 450 - total flux cleaned = -0.0033342 Jy ! Component: 500 - total flux cleaned = -0.00359595 Jy ! Component: 550 - total flux cleaned = -0.00378805 Jy ! Component: 600 - total flux cleaned = -0.00399788 Jy ! Component: 650 - total flux cleaned = -0.00414215 Jy ! Component: 700 - total flux cleaned = -0.0043244 Jy ! Component: 750 - total flux cleaned = -0.0045032 Jy ! Component: 800 - total flux cleaned = -0.00463965 Jy ! Component: 850 - total flux cleaned = -0.00477514 Jy ! Component: 900 - total flux cleaned = -0.00490842 Jy ! Component: 950 - total flux cleaned = -0.00509617 Jy ! Component: 1000 - total flux cleaned = -0.00520682 Jy ! Component: 1050 - total flux cleaned = -0.00527969 Jy ! Component: 1100 - total flux cleaned = -0.00545938 Jy ! Component: 1150 - total flux cleaned = -0.00553031 Jy ! Component: 1200 - total flux cleaned = -0.0056531 Jy ! Component: 1250 - total flux cleaned = -0.00577418 Jy ! Component: 1300 - total flux cleaned = -0.00587696 Jy ! Component: 1350 - total flux cleaned = -0.00592778 Jy ! Component: 1400 - total flux cleaned = -0.00601134 Jy ! Component: 1450 - total flux cleaned = -0.0061103 Jy ! Component: 1500 - total flux cleaned = -0.00614298 Jy ! Component: 1550 - total flux cleaned = -0.00628805 Jy ! Component: 1600 - total flux cleaned = -0.00638317 Jy ! Component: 1650 - total flux cleaned = -0.00633566 Jy ! Component: 1700 - total flux cleaned = -0.00646049 Jy ! Component: 1750 - total flux cleaned = -0.00652198 Jy ! Component: 1800 - total flux cleaned = -0.00656778 Jy ! Component: 1850 - total flux cleaned = -0.00665846 Jy ! Component: 1900 - total flux cleaned = -0.00671824 Jy ! Component: 1950 - total flux cleaned = -0.00680695 Jy ! Component: 2000 - total flux cleaned = -0.00686539 Jy ! Component: 2050 - total flux cleaned = -0.00687982 Jy ! Component: 2100 - total flux cleaned = -0.00693725 Jy ! Component: 2150 - total flux cleaned = -0.00695151 Jy ! Component: 2200 - total flux cleaned = -0.0069799 Jy ! Component: 2250 - total flux cleaned = -0.00703583 Jy ! Component: 2300 - total flux cleaned = -0.00703582 Jy ! Component: 2350 - total flux cleaned = -0.00706324 Jy ! Component: 2400 - total flux cleaned = -0.00703599 Jy ! Component: 2450 - total flux cleaned = -0.00707623 Jy ! Component: 2500 - total flux cleaned = -0.00707614 Jy ! Component: 2550 - total flux cleaned = -0.00707611 Jy ! Component: 2600 - total flux cleaned = -0.00704973 Jy ! Component: 2650 - total flux cleaned = -0.00707603 Jy ! Component: 2700 - total flux cleaned = -0.00706313 Jy ! Component: 2750 - total flux cleaned = -0.00710174 Jy ! Component: 2800 - total flux cleaned = -0.00707611 Jy ! Component: 2850 - total flux cleaned = -0.00710154 Jy ! Component: 2900 - total flux cleaned = -0.00708911 Jy ! Component: 2950 - total flux cleaned = -0.00705173 Jy ! Component: 3000 - total flux cleaned = -0.00703945 Jy ! Component: 3050 - total flux cleaned = -0.0070273 Jy ! Component: 3100 - total flux cleaned = -0.00703951 Jy ! Component: 3150 - total flux cleaned = -0.00701539 Jy ! Component: 3200 - total flux cleaned = -0.0070154 Jy ! Component: 3250 - total flux cleaned = -0.00697954 Jy ! Component: 3300 - total flux cleaned = -0.00701511 Jy ! Component: 3350 - total flux cleaned = -0.00694431 Jy ! Component: 3400 - total flux cleaned = -0.00693271 Jy ! Component: 3450 - total flux cleaned = -0.00692113 Jy ! Component: 3500 - total flux cleaned = -0.00686332 Jy ! Component: 3550 - total flux cleaned = -0.00686328 Jy ! Component: 3600 - total flux cleaned = -0.0068748 Jy ! Component: 3650 - total flux cleaned = -0.0068295 Jy ! Component: 3700 - total flux cleaned = -0.00680701 Jy ! Component: 3750 - total flux cleaned = -0.00679569 Jy ! Component: 3800 - total flux cleaned = -0.0067957 Jy ! Component: 3850 - total flux cleaned = -0.00680685 Jy ! Component: 3900 - total flux cleaned = -0.00676284 Jy ! Component: 3950 - total flux cleaned = -0.00673028 Jy ! Component: 4000 - total flux cleaned = -0.0067195 Jy ! Component: 4050 - total flux cleaned = -0.00670875 Jy ! Total flux subtracted in 4096 components = -0.00670879 Jy ! Clean residual min=-0.000625 max=0.000572 Jy/beam ! Clean residual mean=-0.000002 rms=0.000181 Jy/beam ! Combined flux in latest and established models = 0.0999007 Jy keep ! Adding 214 model components to the UV plane model. ! The established model now contains 344 components and 0.0999007 Jy ![Exited script file: muppet] wmap "J0845-3347_S_2017_05_01_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.526 x 9.069 at -4.096 degrees (North through East) ! Clean map min=-0.0014586 max=0.07976 Jy/beam ! Writing clean map to FITS file: J0845-3347_S_2017_05_01_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.0797596 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000177476 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.667542 0.667542 1.33508 2.67017 5.34033 10.6807 21.3613 42.7227 85.4453 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0005 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.079 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.526 x 9.069 at -4.096 degrees (North through East) ! Clean map min=-0.0014586 max=0.07976 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J0845-3347_S_2017_05_01_pus_uvs.log closed on Wed May 1 18:32:28 2019