! Started logfile: J0840+1312_S_2017_06_15_pus_uvs.log on Tue May 7 15:14:53 2019 obs J0840+1312_S_2017_06_15_pus_uva.fits ! Reading UV FITS file: J0840+1312_S_2017_06_15_pus_uva.fits ! AN table 1: 84 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.965344 visibilities/baseline/integration-bin. ! Found source: J0840+1312 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 603 lines of history. ! ! Reading 14596 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J0840+1312_S_2017_06_15_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 17 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 59 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 59 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 439 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.628077Jy sigma=0.005703 ! Fit after self-cal, rms=0.598808Jy sigma=0.005467 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.739 mas, bmaj=7.001 mas, bpa=-6.361 degrees ! Estimated noise=997.639 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.309132 Jy ! Component: 100 - total flux cleaned = 0.426474 Jy ! Total flux subtracted in 100 components = 0.426474 Jy ! Clean residual min=-0.014635 max=0.052693 Jy/beam ! Clean residual mean=-0.000049 rms=0.004693 Jy/beam ! Combined flux in latest and established models = 0.426475 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 9 components and 0.426475 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.132738Jy sigma=0.001185 ! Fit after self-cal, rms=0.131591Jy sigma=0.001175 ! Inverting map ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.060025 Jy ! Component: 100 - total flux cleaned = 0.0913777 Jy ! Total flux subtracted in 100 components = 0.0913777 Jy ! Clean residual min=-0.007521 max=0.018574 Jy/beam ! Clean residual mean=-0.000023 rms=0.002083 Jy/beam ! Combined flux in latest and established models = 0.517852 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 18 components and 0.517852 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.093612Jy sigma=0.000808 ! Fit after self-cal, rms=0.093368Jy sigma=0.000806 ! Inverting map ! Added new window around map position (4, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0201996 Jy ! Component: 100 - total flux cleaned = 0.0315455 Jy ! Total flux subtracted in 100 components = 0.0315455 Jy ! Clean residual min=-0.005860 max=0.008165 Jy/beam ! Clean residual mean=-0.000014 rms=0.001501 Jy/beam ! Combined flux in latest and established models = 0.549398 Jy ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 28 components and 0.549398 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.087307Jy sigma=0.000750 ! Fit after self-cal, rms=0.087156Jy sigma=0.000748 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.286 mas, bmaj=7.763 mas, bpa=-5.338 degrees ! Estimated noise=740.875 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0117521 Jy ! Component: 100 - total flux cleaned = 0.0181155 Jy ! Component: 150 - total flux cleaned = 0.0218157 Jy ! Component: 200 - total flux cleaned = 0.0241862 Jy ! Total flux subtracted in 200 components = 0.0241862 Jy ! Clean residual min=-0.005135 max=0.005102 Jy/beam ! Clean residual mean=-0.000014 rms=0.001314 Jy/beam ! Combined flux in latest and established models = 0.573584 Jy ! Performing phase self-cal ! Adding 36 model components to the UV plane model. ! The established model now contains 57 components and 0.573584 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.085397Jy sigma=0.000735 ! Fit after self-cal, rms=0.085318Jy sigma=0.000734 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.02 FD 0.94 HN 0.97 KP 1.03 ! LA 1.01 MK 1.02 NL 0.91 OV 1.02 ! PT 1.02 SC 0.96 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.02 FD 0.98 HN 1.00 KP 1.00 ! LA 0.97 MK 1.02 NL 1.05 OV 1.05 ! PT 0.99 SC 1.01 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.98 FD 1.03 HN 1.00 KP 1.00 ! LA 0.99 MK 1.04 NL 1.02 OV 0.95 ! PT 0.99 SC 1.03 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.06 HN 0.97 KP 1.00* ! LA 0.96 MK 1.02 NL 1.00* OV 1.00* ! PT 1.03 SC 1.00* ! ! ! Fit before self-cal, rms=0.085318Jy sigma=0.000734 ! Fit after self-cal, rms=0.082780Jy sigma=0.000709 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.304 mas, bmaj=7.769 mas, bpa=-5.176 degrees ! Estimated noise=743.077 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00197516 Jy ! Component: 100 - total flux cleaned = 0.00219447 Jy ! Component: 150 - total flux cleaned = 0.00242129 Jy ! Component: 200 - total flux cleaned = 0.00247089 Jy ! Total flux subtracted in 200 components = 0.00247089 Jy ! Clean residual min=-0.004452 max=0.005077 Jy/beam ! Clean residual mean=-0.000012 rms=0.001205 Jy/beam ! Combined flux in latest and established models = 0.576055 Jy ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 71 components and 0.576055 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.082652Jy sigma=0.000707 ! Fit after self-cal, rms=0.082629Jy sigma=0.000707 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.082629Jy sigma=0.000707 ! Fit after self-cal, rms=0.079649Jy sigma=0.000686 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.306 mas, bmaj=7.783 mas, bpa=-5.263 degrees ! Estimated noise=743.52 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000957207 Jy ! Component: 100 - total flux cleaned = 0.00120829 Jy ! Component: 150 - total flux cleaned = 0.00140189 Jy ! Component: 200 - total flux cleaned = 0.00145873 Jy ! Total flux subtracted in 200 components = 0.00145873 Jy ! Clean residual min=-0.002464 max=0.003738 Jy/beam ! Clean residual mean=-0.000013 rms=0.000683 Jy/beam ! Combined flux in latest and established models = 0.577513 Jy selfcal ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 82 components and 0.577514 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.079601Jy sigma=0.000685 ! Fit after self-cal, rms=0.079593Jy sigma=0.000685 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (17, -2.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00409053 Jy ! Component: 100 - total flux cleaned = 0.00642196 Jy ! Component: 150 - total flux cleaned = 0.00774592 Jy ! Component: 200 - total flux cleaned = 0.00831119 Jy ! Total flux subtracted in 200 components = 0.00831119 Jy ! Clean residual min=-0.002036 max=0.002630 Jy/beam ! Clean residual mean=-0.000010 rms=0.000564 Jy/beam ! Combined flux in latest and established models = 0.585825 Jy ! Performing phase self-cal ! Adding 31 model components to the UV plane model. ! The established model now contains 110 components and 0.585825 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.079382Jy sigma=0.000683 ! Fit after self-cal, rms=0.079364Jy sigma=0.000683 ! Inverting map ! Added new window around map position (26.5, 0.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00242298 Jy ! Component: 100 - total flux cleaned = 0.00381614 Jy ! Component: 150 - total flux cleaned = 0.00454824 Jy ! Component: 200 - total flux cleaned = 0.00469774 Jy ! Total flux subtracted in 200 components = 0.00469774 Jy ! Clean residual min=-0.002003 max=0.002284 Jy/beam ! Clean residual mean=-0.000007 rms=0.000517 Jy/beam ! Combined flux in latest and established models = 0.590523 Jy ! Performing phase self-cal ! Adding 36 model components to the UV plane model. ! The established model now contains 139 components and 0.590523 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.079279Jy sigma=0.000682 ! Fit after self-cal, rms=0.079275Jy sigma=0.000682 ! Inverting map ! Added new window around map position (33.5, -110.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00137406 Jy ! Component: 100 - total flux cleaned = 0.00189101 Jy ! Component: 150 - total flux cleaned = 0.00262462 Jy ! Component: 200 - total flux cleaned = 0.00318595 Jy ! Total flux subtracted in 200 components = 0.00318595 Jy ! Clean residual min=-0.001730 max=0.001916 Jy/beam ! Clean residual mean=-0.000007 rms=0.000487 Jy/beam ! Combined flux in latest and established models = 0.593709 Jy ! Performing phase self-cal ! Adding 29 model components to the UV plane model. ! The established model now contains 160 components and 0.593709 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.079200Jy sigma=0.000681 ! Fit after self-cal, rms=0.079198Jy sigma=0.000681 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.079198Jy sigma=0.000681 ! Fit after self-cal, rms=0.079096Jy sigma=0.000680 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.309 mas, bmaj=7.786 mas, bpa=-5.235 degrees ! Estimated noise=743.534 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00121037 Jy ! Component: 100 - total flux cleaned = 0.0018408 Jy ! Component: 150 - total flux cleaned = 0.00225856 Jy ! Component: 200 - total flux cleaned = 0.00267189 Jy ! Total flux subtracted in 200 components = 0.00267189 Jy ! Clean residual min=-0.001739 max=0.001750 Jy/beam ! Clean residual mean=-0.000006 rms=0.000447 Jy/beam ! Combined flux in latest and established models = 0.596381 Jy selfcal ! Performing phase self-cal ! Adding 45 model components to the UV plane model. ! The established model now contains 187 components and 0.596381 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.079063Jy sigma=0.000680 ! Fit after self-cal, rms=0.079061Jy sigma=0.000680 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000598425 Jy ! Component: 100 - total flux cleaned = 0.000979929 Jy ! Component: 150 - total flux cleaned = 0.00119707 Jy ! Component: 200 - total flux cleaned = 0.00127358 Jy ! Total flux subtracted in 200 components = 0.00127358 Jy ! Clean residual min=-0.001688 max=0.001751 Jy/beam ! Clean residual mean=-0.000006 rms=0.000439 Jy/beam ! Combined flux in latest and established models = 0.597654 Jy ! Performing phase self-cal ! Adding 43 model components to the UV plane model. ! The established model now contains 198 components and 0.597654 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.079042Jy sigma=0.000680 ! Fit after self-cal, rms=0.079041Jy sigma=0.000680 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.079041Jy sigma=0.000680 ! Fit after self-cal, rms=0.079059Jy sigma=0.000680 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.437 mas, bmaj=11.68 mas, bpa=-8.684 degrees ! Estimated noise=919.711 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00134479 Jy ! Component: 100 - total flux cleaned = 0.00204843 Jy ! Component: 150 - total flux cleaned = 0.00244229 Jy ! Component: 200 - total flux cleaned = 0.00263085 Jy ! Total flux subtracted in 200 components = 0.00263085 Jy ! Clean residual min=-0.001731 max=0.002013 Jy/beam ! Clean residual mean=-0.000010 rms=0.000533 Jy/beam ! Combined flux in latest and established models = 0.600285 Jy selfcal ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 217 components and 0.600285 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.079048Jy sigma=0.000680 ! Fit after self-cal, rms=0.079045Jy sigma=0.000680 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000326157 Jy ! Component: 100 - total flux cleaned = 0.000614028 Jy ! Component: 150 - total flux cleaned = 0.000764379 Jy ! Component: 200 - total flux cleaned = 0.00086438 Jy ! Total flux subtracted in 200 components = 0.00086438 Jy ! Clean residual min=-0.001699 max=0.002015 Jy/beam ! Clean residual mean=-0.000010 rms=0.000524 Jy/beam ! Combined flux in latest and established models = 0.60115 Jy ! Performing phase self-cal ! Adding 32 model components to the UV plane model. ! The established model now contains 233 components and 0.60115 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.079041Jy sigma=0.000680 ! Fit after self-cal, rms=0.079040Jy sigma=0.000680 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.311 mas, bmaj=7.787 mas, bpa=-5.223 degrees ! Estimated noise=743.836 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.311 x 7.787 at -5.223 degrees (North through East) ! Clean map min=-0.0015743 max=0.41423 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.754 mas, bmaj=7.029 mas, bpa=-6.274 degrees ! Estimated noise=1006.62 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.312277 Jy ! Component: 100 - total flux cleaned = 0.432319 Jy ! Component: 150 - total flux cleaned = 0.490554 Jy ! Component: 200 - total flux cleaned = 0.522039 Jy ! Total flux subtracted in 200 components = 0.522039 Jy ! Clean residual min=-0.005414 max=0.015778 Jy/beam ! Clean residual mean=-0.000024 rms=0.001679 Jy/beam ! Combined flux in latest and established models = 0.522039 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 16 model components to the UV plane model. ! The established model now contains 16 components and 0.522039 Jy ! Inverting map and beam ! Estimated beam: bmin=3.311 mas, bmaj=7.787 mas, bpa=-5.223 degrees ! Estimated noise=743.836 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0244995 Jy ! Component: 100 - total flux cleaned = 0.037927 Jy ! Component: 150 - total flux cleaned = 0.0457717 Jy ! Component: 200 - total flux cleaned = 0.0513401 Jy ! Total flux subtracted in 200 components = 0.0513401 Jy ! Clean residual min=-0.002666 max=0.003818 Jy/beam ! Clean residual mean=-0.000017 rms=0.000765 Jy/beam ! Combined flux in latest and established models = 0.573379 Jy ! Adding 40 model components to the UV plane model. ! The established model now contains 48 components and 0.573379 Jy ! Inverting map ! Added new window around map position (9.5, -1.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00444872 Jy ! Component: 100 - total flux cleaned = 0.00793666 Jy ! Component: 150 - total flux cleaned = 0.0107954 Jy ! Component: 200 - total flux cleaned = 0.013144 Jy ! Total flux subtracted in 200 components = 0.013144 Jy ! Clean residual min=-0.001989 max=0.002154 Jy/beam ! Clean residual mean=-0.000011 rms=0.000544 Jy/beam ! Combined flux in latest and established models = 0.586523 Jy ! Adding 53 model components to the UV plane model. ! The established model now contains 89 components and 0.586523 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.437 mas, bmaj=11.68 mas, bpa=-8.684 degrees ! Estimated noise=919.711 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00338699 Jy ! Component: 100 - total flux cleaned = 0.00579847 Jy ! Component: 150 - total flux cleaned = 0.00771155 Jy ! Component: 200 - total flux cleaned = 0.00908277 Jy ! Total flux subtracted in 200 components = 0.00908277 Jy ! Clean residual min=-0.001893 max=0.001867 Jy/beam ! Clean residual mean=-0.000014 rms=0.000582 Jy/beam ! Combined flux in latest and established models = 0.595606 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000986289 Jy ! Component: 100 - total flux cleaned = 0.0017851 Jy ! Component: 150 - total flux cleaned = 0.00240741 Jy ! Component: 200 - total flux cleaned = 0.0028951 Jy ! Total flux subtracted in 200 components = 0.0028951 Jy ! Clean residual min=-0.001772 max=0.001848 Jy/beam ! Clean residual mean=-0.000012 rms=0.000543 Jy/beam ! Combined flux in latest and established models = 0.598501 Jy ! Adding 107 model components to the UV plane model. ! The established model now contains 187 components and 0.598501 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.311 mas, bmaj=7.787 mas, bpa=-5.223 degrees ! Estimated noise=743.836 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000641305 Jy ! Component: 100 - total flux cleaned = 0.0011809 Jy ! Component: 150 - total flux cleaned = 0.00162063 Jy ! Component: 200 - total flux cleaned = 0.00178968 Jy ! Total flux subtracted in 200 components = 0.00178968 Jy ! Clean residual min=-0.001677 max=0.001797 Jy/beam ! Clean residual mean=-0.000005 rms=0.000437 Jy/beam ! Combined flux in latest and established models = 0.60029 Jy selfcal ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 215 components and 0.60029 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.079069Jy sigma=0.000680 ! Fit after self-cal, rms=0.079051Jy sigma=0.000680 wmodel J0840+1312_S_2017_06_15_pus_map.mod ! Writing 215 model components to file: J0840+1312_S_2017_06_15_pus_map.mod wobs J0840+1312_S_2017_06_15_pus_uvs.fits ! Writing UV FITS file: J0840+1312_S_2017_06_15_pus_uvs.fits wwins J0840+1312_S_2017_06_15_pus_map.win ! wwins: Wrote 6 windows to J0840+1312_S_2017_06_15_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.000262742 Jy ! Component: 100 - total flux cleaned = 0.000585962 Jy ! Component: 150 - total flux cleaned = 0.000838774 Jy ! Component: 200 - total flux cleaned = 0.00100162 Jy ! Component: 250 - total flux cleaned = 0.00121262 Jy ! Component: 300 - total flux cleaned = 0.00144446 Jy ! Component: 350 - total flux cleaned = 0.00159586 Jy ! Component: 400 - total flux cleaned = 0.00179345 Jy ! Component: 450 - total flux cleaned = 0.00198746 Jy ! Component: 500 - total flux cleaned = 0.00220166 Jy ! Component: 550 - total flux cleaned = 0.00236523 Jy ! Component: 600 - total flux cleaned = 0.0025493 Jy ! Component: 650 - total flux cleaned = 0.00270796 Jy ! Component: 700 - total flux cleaned = 0.00281964 Jy ! Component: 750 - total flux cleaned = 0.00306231 Jy ! Component: 800 - total flux cleaned = 0.00319267 Jy ! Component: 850 - total flux cleaned = 0.00340713 Jy ! Component: 900 - total flux cleaned = 0.00359728 Jy ! Component: 950 - total flux cleaned = 0.00370214 Jy ! Component: 1000 - total flux cleaned = 0.00382615 Jy ! Component: 1050 - total flux cleaned = 0.00398948 Jy ! Component: 1100 - total flux cleaned = 0.00413042 Jy ! Component: 1150 - total flux cleaned = 0.00419036 Jy ! Component: 1200 - total flux cleaned = 0.00432859 Jy ! Component: 1250 - total flux cleaned = 0.00450446 Jy ! Component: 1300 - total flux cleaned = 0.0046202 Jy ! Component: 1350 - total flux cleaned = 0.00467754 Jy ! Component: 1400 - total flux cleaned = 0.00486649 Jy ! Component: 1450 - total flux cleaned = 0.0048853 Jy ! Component: 1500 - total flux cleaned = 0.00494124 Jy ! Component: 1550 - total flux cleaned = 0.00508852 Jy ! Component: 1600 - total flux cleaned = 0.0051433 Jy ! Component: 1650 - total flux cleaned = 0.00523374 Jy ! Component: 1700 - total flux cleaned = 0.00532332 Jy ! Component: 1750 - total flux cleaned = 0.00541225 Jy ! Component: 1800 - total flux cleaned = 0.0054825 Jy ! Component: 1850 - total flux cleaned = 0.00548267 Jy ! Component: 1900 - total flux cleaned = 0.00560393 Jy ! Component: 1950 - total flux cleaned = 0.00565532 Jy ! Component: 2000 - total flux cleaned = 0.00565554 Jy ! Component: 2050 - total flux cleaned = 0.00568965 Jy ! Component: 2100 - total flux cleaned = 0.00575704 Jy ! Component: 2150 - total flux cleaned = 0.00580713 Jy ! Component: 2200 - total flux cleaned = 0.00588965 Jy ! Component: 2250 - total flux cleaned = 0.00587336 Jy ! Component: 2300 - total flux cleaned = 0.00588973 Jy ! Component: 2350 - total flux cleaned = 0.00592208 Jy ! Component: 2400 - total flux cleaned = 0.00597034 Jy ! Component: 2450 - total flux cleaned = 0.00603397 Jy ! Component: 2500 - total flux cleaned = 0.00614471 Jy ! Component: 2550 - total flux cleaned = 0.00608176 Jy ! Component: 2600 - total flux cleaned = 0.0061598 Jy ! Component: 2650 - total flux cleaned = 0.0062374 Jy ! Component: 2700 - total flux cleaned = 0.00620637 Jy ! Component: 2750 - total flux cleaned = 0.00626759 Jy ! Component: 2800 - total flux cleaned = 0.00626767 Jy ! Component: 2850 - total flux cleaned = 0.00632841 Jy ! Component: 2900 - total flux cleaned = 0.00638857 Jy ! Component: 2950 - total flux cleaned = 0.00643337 Jy ! Component: 3000 - total flux cleaned = 0.00643353 Jy ! Component: 3050 - total flux cleaned = 0.00646333 Jy ! Component: 3100 - total flux cleaned = 0.0064926 Jy ! Component: 3150 - total flux cleaned = 0.00658019 Jy ! Component: 3200 - total flux cleaned = 0.00662373 Jy ! Component: 3250 - total flux cleaned = 0.00673901 Jy ! Component: 3300 - total flux cleaned = 0.00672463 Jy ! Component: 3350 - total flux cleaned = 0.00673892 Jy ! Component: 3400 - total flux cleaned = 0.00685219 Jy ! Component: 3450 - total flux cleaned = 0.00689439 Jy ! Component: 3500 - total flux cleaned = 0.00690837 Jy ! Component: 3550 - total flux cleaned = 0.00697796 Jy ! Component: 3600 - total flux cleaned = 0.00696414 Jy ! Component: 3650 - total flux cleaned = 0.00701912 Jy ! Component: 3700 - total flux cleaned = 0.00701904 Jy ! Component: 3750 - total flux cleaned = 0.00701897 Jy ! Component: 3800 - total flux cleaned = 0.00703245 Jy ! Component: 3850 - total flux cleaned = 0.00709982 Jy ! Component: 3900 - total flux cleaned = 0.00703277 Jy ! Component: 3950 - total flux cleaned = 0.00711273 Jy ! Component: 4000 - total flux cleaned = 0.00712602 Jy ! Component: 4050 - total flux cleaned = 0.00711281 Jy ! Total flux subtracted in 4096 components = 0.00715223 Jy ! Clean residual min=-0.000780 max=0.001012 Jy/beam ! Clean residual mean=-0.000002 rms=0.000245 Jy/beam ! Combined flux in latest and established models = 0.607443 Jy keep ! Adding 288 model components to the UV plane model. ! The established model now contains 503 components and 0.607443 Jy ![Exited script file: muppet] wmap "J0840+1312_S_2017_06_15_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.311 x 7.787 at -5.223 degrees (North through East) ! Clean map min=-0.0013427 max=0.41416 Jy/beam ! Writing clean map to FITS file: J0840+1312_S_2017_06_15_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.414159 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000242243 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.175471 0.175471 0.350941 0.701882 1.40376 2.80753 5.61506 11.2301 22.4602 44.9205 89.8409 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0007 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.414 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.311 x 7.787 at -5.223 degrees (North through East) ! Clean map min=-0.0013427 max=0.41416 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J0840+1312_S_2017_06_15_pus_uvs.log closed on Tue May 7 15:14:59 2019