! Started logfile: J0839+0104_S_2017_05_01_pus_uvs.log on Wed May 1 18:31:59 2019 obs J0839+0104_S_2017_05_01_pus_uva.fits ! Reading UV FITS file: J0839+0104_S_2017_05_01_pus_uva.fits ! AN table 1: 84 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.959524 visibilities/baseline/integration-bin. ! Found source: J0839+0104 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 788 lines of history. ! ! Reading 14508 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J0839+0104_S_2017_05_01_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 19 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 19 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 19 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 367 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.618586Jy sigma=0.023653 ! Fit after self-cal, rms=0.599375Jy sigma=0.023601 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.814 mas, bmaj=6.669 mas, bpa=5.734 degrees ! Estimated noise=792.825 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.236649 Jy ! Component: 100 - total flux cleaned = 0.338279 Jy ! Total flux subtracted in 100 components = 0.338279 Jy ! Clean residual min=-0.051321 max=0.077479 Jy/beam ! Clean residual mean=-0.000102 rms=0.017153 Jy/beam ! Combined flux in latest and established models = 0.338279 Jy ! Performing phase self-cal ! Adding 5 model components to the UV plane model. ! The established model now contains 5 components and 0.338279 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.229334Jy sigma=0.004370 ! Fit after self-cal, rms=0.226995Jy sigma=0.004365 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.256 mas, bmaj=6.99 mas, bpa=8.928 degrees ! Estimated noise=609.023 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0754601 Jy ! Component: 100 - total flux cleaned = 0.11752 Jy ! Component: 150 - total flux cleaned = 0.145096 Jy ! Component: 200 - total flux cleaned = 0.163841 Jy ! Total flux subtracted in 200 components = 0.163841 Jy ! Clean residual min=-0.043466 max=0.051113 Jy/beam ! Clean residual mean=-0.000027 rms=0.011732 Jy/beam ! Combined flux in latest and established models = 0.50212 Jy ! Performing phase self-cal ! Adding 32 model components to the UV plane model. ! The established model now contains 36 components and 0.50212 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.200116Jy sigma=0.003571 ! Fit after self-cal, rms=0.197758Jy sigma=0.003569 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.76 FD 0.84 HN 0.97 KP 1.02 ! LA 0.99 MK 1.03 NL 0.96 OV 0.99 ! PT 1.01 SC 0.41 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 0.74 FD 0.87 HN 1.06 KP 0.97 ! LA 0.97 MK 1.04 NL 1.05 OV 1.02 ! PT 0.98 SC 44.34 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.80 FD 0.90 HN 1.01 KP 1.00 ! LA 0.99 MK 1.06 NL 1.02 OV 0.95 ! PT 0.97 SC 0.43 ! ! ! Correcting IF 4. ! A total of 9 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.73 FD 0.91 HN 1.03 KP 1.00* ! LA 0.94 MK 1.17 NL 1.00* OV 1.00* ! PT 1.03 SC 1.00* ! ! ! Fit before self-cal, rms=0.197758Jy sigma=0.003569 ! Fit after self-cal, rms=3.872860Jy sigma=0.001231 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.411 mas, bmaj=7.358 mas, bpa=2.97 degrees ! Estimated noise=725.765 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.0132057 Jy ! Component: 100 - total flux cleaned = -0.0180695 Jy ! Component: 150 - total flux cleaned = -0.0221628 Jy ! Component: 200 - total flux cleaned = -0.0240661 Jy ! Total flux subtracted in 200 components = -0.0240661 Jy ! Clean residual min=-0.014260 max=0.017083 Jy/beam ! Clean residual mean=-0.000053 rms=0.003929 Jy/beam ! Combined flux in latest and established models = 0.478054 Jy ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 38 components and 0.478054 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=3.858823Jy sigma=0.001209 ! Fit after self-cal, rms=3.858820Jy sigma=0.001200 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=3.858820Jy sigma=0.001200 ! Fit after self-cal, rms=0.624738Jy sigma=0.000747 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.342 mas, bmaj=7.35 mas, bpa=3.878 degrees ! Estimated noise=717.52 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00489275 Jy ! Component: 100 - total flux cleaned = -0.00515524 Jy ! Component: 150 - total flux cleaned = -0.00564099 Jy ! Component: 200 - total flux cleaned = -0.00650633 Jy ! Total flux subtracted in 200 components = -0.00650633 Jy ! Clean residual min=-0.007529 max=0.007914 Jy/beam ! Clean residual mean=-0.000014 rms=0.001549 Jy/beam ! Combined flux in latest and established models = 0.471548 Jy selfcal ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 50 components and 0.471548 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.624112Jy sigma=0.000722 ! Fit after self-cal, rms=0.624754Jy sigma=0.000721 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-5, -4.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00280242 Jy ! Component: 100 - total flux cleaned = 0.00259971 Jy ! Component: 150 - total flux cleaned = 0.00276009 Jy ! Component: 200 - total flux cleaned = 0.00274818 Jy ! Total flux subtracted in 200 components = 0.00274818 Jy ! Clean residual min=-0.006053 max=0.005294 Jy/beam ! Clean residual mean=-0.000014 rms=0.001351 Jy/beam ! Combined flux in latest and established models = 0.474296 Jy ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 66 components and 0.474296 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.624354Jy sigma=0.000708 ! Fit after self-cal, rms=0.624274Jy sigma=0.000708 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.624274Jy sigma=0.000708 ! Fit after self-cal, rms=0.685215Jy sigma=0.000702 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.337 mas, bmaj=7.366 mas, bpa=3.585 degrees ! Estimated noise=718.413 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00335714 Jy ! Component: 100 - total flux cleaned = -0.00300018 Jy ! Component: 150 - total flux cleaned = -0.00315695 Jy ! Component: 200 - total flux cleaned = -0.00330074 Jy ! Total flux subtracted in 200 components = -0.00330074 Jy ! Clean residual min=-0.004941 max=0.004437 Jy/beam ! Clean residual mean=-0.000013 rms=0.001107 Jy/beam ! Combined flux in latest and established models = 0.470995 Jy selfcal ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 74 components and 0.470995 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.684883Jy sigma=0.000692 ! Fit after self-cal, rms=0.684745Jy sigma=0.000692 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000273801 Jy ! Component: 100 - total flux cleaned = 0.000275154 Jy ! Component: 150 - total flux cleaned = 0.000276436 Jy ! Component: 200 - total flux cleaned = 0.000279844 Jy ! Total flux subtracted in 200 components = 0.000279844 Jy ! Clean residual min=-0.004479 max=0.004257 Jy/beam ! Clean residual mean=-0.000012 rms=0.001039 Jy/beam ! Combined flux in latest and established models = 0.471275 Jy ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 77 components and 0.471275 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.684587Jy sigma=0.000689 ! Fit after self-cal, rms=0.684562Jy sigma=0.000689 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.684562Jy sigma=0.000689 ! Fit after self-cal, rms=0.712971Jy sigma=0.000687 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.607 mas, bmaj=11.3 mas, bpa=3.754 degrees ! Estimated noise=938.835 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00320989 Jy ! Component: 100 - total flux cleaned = -0.00332022 Jy ! Component: 150 - total flux cleaned = -0.00341694 Jy ! Component: 200 - total flux cleaned = -0.00350035 Jy ! Total flux subtracted in 200 components = -0.00350035 Jy ! Clean residual min=-0.004387 max=0.005008 Jy/beam ! Clean residual mean=-0.000028 rms=0.001268 Jy/beam ! Combined flux in latest and established models = 0.467775 Jy selfcal ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 87 components and 0.467775 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.712775Jy sigma=0.000685 ! Fit after self-cal, rms=0.712697Jy sigma=0.000685 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000117992 Jy ! Component: 100 - total flux cleaned = 5.35917e-05 Jy ! Component: 150 - total flux cleaned = -3.18027e-06 Jy ! Component: 200 - total flux cleaned = 5.13614e-05 Jy ! Total flux subtracted in 200 components = 5.13614e-05 Jy ! Clean residual min=-0.004235 max=0.004962 Jy/beam ! Clean residual mean=-0.000027 rms=0.001242 Jy/beam ! Combined flux in latest and established models = 0.467826 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 91 components and 0.467826 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.712608Jy sigma=0.000684 ! Fit after self-cal, rms=0.712584Jy sigma=0.000684 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.339 mas, bmaj=7.381 mas, bpa=3.303 degrees ! Estimated noise=719.852 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.339 x 7.381 at 3.303 degrees (North through East) ! Clean map min=-0.003989 max=0.35228 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.802 mas, bmaj=6.671 mas, bpa=4.345 degrees ! Estimated noise=918.561 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.269755 Jy ! Component: 100 - total flux cleaned = 0.355352 Jy ! Component: 150 - total flux cleaned = 0.392332 Jy ! Component: 200 - total flux cleaned = 0.412709 Jy ! Total flux subtracted in 200 components = 0.412709 Jy ! Clean residual min=-0.007772 max=0.010685 Jy/beam ! Clean residual mean=-0.000044 rms=0.001797 Jy/beam ! Combined flux in latest and established models = 0.412709 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 32 model components to the UV plane model. ! The established model now contains 32 components and 0.412709 Jy ! Inverting map and beam ! Estimated beam: bmin=3.339 mas, bmaj=7.381 mas, bpa=3.303 degrees ! Estimated noise=719.852 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0184266 Jy ! Component: 100 - total flux cleaned = 0.0301184 Jy ! Component: 150 - total flux cleaned = 0.038141 Jy ! Component: 200 - total flux cleaned = 0.0439302 Jy ! Total flux subtracted in 200 components = 0.0439302 Jy ! Clean residual min=-0.005321 max=0.004680 Jy/beam ! Clean residual mean=-0.000015 rms=0.001051 Jy/beam ! Combined flux in latest and established models = 0.45664 Jy ! Adding 49 model components to the UV plane model. ! The established model now contains 75 components and 0.45664 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.607 mas, bmaj=11.3 mas, bpa=3.754 degrees ! Estimated noise=938.835 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00557363 Jy ! Component: 100 - total flux cleaned = 0.00854207 Jy ! Component: 150 - total flux cleaned = 0.0097817 Jy ! Component: 200 - total flux cleaned = 0.0100179 Jy ! Total flux subtracted in 200 components = 0.0100179 Jy ! Clean residual min=-0.004180 max=0.005191 Jy/beam ! Clean residual mean=-0.000028 rms=0.001245 Jy/beam ! Combined flux in latest and established models = 0.466658 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000106972 Jy ! Component: 100 - total flux cleaned = 0.00025706 Jy ! Component: 150 - total flux cleaned = 0.000398377 Jy ! Component: 200 - total flux cleaned = 0.000527911 Jy ! Total flux subtracted in 200 components = 0.000527911 Jy ! Clean residual min=-0.004122 max=0.005117 Jy/beam ! Clean residual mean=-0.000027 rms=0.001234 Jy/beam ! Combined flux in latest and established models = 0.467186 Jy ! Adding 48 model components to the UV plane model. ! The established model now contains 112 components and 0.467186 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.339 mas, bmaj=7.381 mas, bpa=3.303 degrees ! Estimated noise=719.852 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000862758 Jy ! Component: 100 - total flux cleaned = -0.00102978 Jy ! Component: 150 - total flux cleaned = -0.000815667 Jy ! Component: 200 - total flux cleaned = -0.000687884 Jy ! Total flux subtracted in 200 components = -0.000687884 Jy ! Clean residual min=-0.004645 max=0.003792 Jy/beam ! Clean residual mean=-0.000012 rms=0.000909 Jy/beam ! Combined flux in latest and established models = 0.466498 Jy selfcal ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 128 components and 0.466498 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.712139Jy sigma=0.000683 ! Fit after self-cal, rms=0.712043Jy sigma=0.000683 wmodel J0839+0104_S_2017_05_01_pus_map.mod ! Writing 128 model components to file: J0839+0104_S_2017_05_01_pus_map.mod wobs J0839+0104_S_2017_05_01_pus_uvs.fits ! Writing UV FITS file: J0839+0104_S_2017_05_01_pus_uvs.fits wwins J0839+0104_S_2017_05_01_pus_map.win ! wwins: Wrote 2 windows to J0839+0104_S_2017_05_01_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.00147819 Jy ! Component: 100 - total flux cleaned = -0.00218147 Jy ! Component: 150 - total flux cleaned = -0.00257107 Jy ! Component: 200 - total flux cleaned = -0.00275447 Jy ! Component: 250 - total flux cleaned = -0.0027549 Jy ! Component: 300 - total flux cleaned = -0.00270073 Jy ! Component: 350 - total flux cleaned = -0.00254036 Jy ! Component: 400 - total flux cleaned = -0.00238553 Jy ! Component: 450 - total flux cleaned = -0.00238494 Jy ! Component: 500 - total flux cleaned = -0.00233518 Jy ! Component: 550 - total flux cleaned = -0.00233419 Jy ! Component: 600 - total flux cleaned = -0.00228962 Jy ! Component: 650 - total flux cleaned = -0.00233584 Jy ! Component: 700 - total flux cleaned = -0.00242363 Jy ! Component: 750 - total flux cleaned = -0.00246543 Jy ! Component: 800 - total flux cleaned = -0.00250679 Jy ! Component: 850 - total flux cleaned = -0.00262915 Jy ! Component: 900 - total flux cleaned = -0.00262961 Jy ! Component: 950 - total flux cleaned = -0.00282487 Jy ! Component: 1000 - total flux cleaned = -0.00286301 Jy ! Component: 1050 - total flux cleaned = -0.00289956 Jy ! Component: 1100 - total flux cleaned = -0.00286263 Jy ! Component: 1150 - total flux cleaned = -0.00286313 Jy ! Component: 1200 - total flux cleaned = -0.00282736 Jy ! Component: 1250 - total flux cleaned = -0.00272291 Jy ! Component: 1300 - total flux cleaned = -0.0027227 Jy ! Component: 1350 - total flux cleaned = -0.00258744 Jy ! Component: 1400 - total flux cleaned = -0.00252069 Jy ! Component: 1450 - total flux cleaned = -0.00238963 Jy ! Component: 1500 - total flux cleaned = -0.00222881 Jy ! Component: 1550 - total flux cleaned = -0.00219755 Jy ! Component: 1600 - total flux cleaned = -0.00213475 Jy ! Component: 1650 - total flux cleaned = -0.00201043 Jy ! Component: 1700 - total flux cleaned = -0.00198016 Jy ! Component: 1750 - total flux cleaned = -0.00198001 Jy ! Component: 1800 - total flux cleaned = -0.00189035 Jy ! Component: 1850 - total flux cleaned = -0.00194936 Jy ! Component: 1900 - total flux cleaned = -0.00183341 Jy ! Component: 1950 - total flux cleaned = -0.00180515 Jy ! Component: 2000 - total flux cleaned = -0.00174876 Jy ! Component: 2050 - total flux cleaned = -0.00172167 Jy ! Component: 2100 - total flux cleaned = -0.00180411 Jy ! Component: 2150 - total flux cleaned = -0.00177635 Jy ! Component: 2200 - total flux cleaned = -0.00180326 Jy ! Component: 2250 - total flux cleaned = -0.00182971 Jy ! Component: 2300 - total flux cleaned = -0.00172404 Jy ! Component: 2350 - total flux cleaned = -0.00177634 Jy ! Component: 2400 - total flux cleaned = -0.00180208 Jy ! Component: 2450 - total flux cleaned = -0.00180233 Jy ! Component: 2500 - total flux cleaned = -0.00182729 Jy ! Component: 2550 - total flux cleaned = -0.00190212 Jy ! Component: 2600 - total flux cleaned = -0.00187774 Jy ! Component: 2650 - total flux cleaned = -0.00197585 Jy ! Component: 2700 - total flux cleaned = -0.00197611 Jy ! Component: 2750 - total flux cleaned = -0.00202445 Jy ! Component: 2800 - total flux cleaned = -0.00214377 Jy ! Component: 2850 - total flux cleaned = -0.00214386 Jy ! Component: 2900 - total flux cleaned = -0.00221386 Jy ! Component: 2950 - total flux cleaned = -0.00219068 Jy ! Component: 3000 - total flux cleaned = -0.00223666 Jy ! Component: 3050 - total flux cleaned = -0.00223661 Jy ! Component: 3100 - total flux cleaned = -0.00221444 Jy ! Component: 3150 - total flux cleaned = -0.00225909 Jy ! Component: 3200 - total flux cleaned = -0.00228095 Jy ! Component: 3250 - total flux cleaned = -0.00225889 Jy ! Component: 3300 - total flux cleaned = -0.00225901 Jy ! Component: 3350 - total flux cleaned = -0.00221584 Jy ! Component: 3400 - total flux cleaned = -0.00221602 Jy ! Component: 3450 - total flux cleaned = -0.00236507 Jy ! Component: 3500 - total flux cleaned = -0.00228065 Jy ! Component: 3550 - total flux cleaned = -0.0023227 Jy ! Component: 3600 - total flux cleaned = -0.00240605 Jy ! Component: 3650 - total flux cleaned = -0.00242692 Jy ! Component: 3700 - total flux cleaned = -0.00259089 Jy ! Component: 3750 - total flux cleaned = -0.00259086 Jy ! Component: 3800 - total flux cleaned = -0.00265144 Jy ! Component: 3850 - total flux cleaned = -0.00269161 Jy ! Component: 3900 - total flux cleaned = -0.00277111 Jy ! Component: 3950 - total flux cleaned = -0.00283056 Jy ! Component: 4000 - total flux cleaned = -0.00283053 Jy ! Component: 4050 - total flux cleaned = -0.00292815 Jy ! Total flux subtracted in 4096 components = -0.00292831 Jy ! Clean residual min=-0.001119 max=0.001137 Jy/beam ! Clean residual mean=-0.000010 rms=0.000369 Jy/beam ! Combined flux in latest and established models = 0.463569 Jy keep ! Adding 332 model components to the UV plane model. ! The established model now contains 460 components and 0.463569 Jy ![Exited script file: muppet] wmap "J0839+0104_S_2017_05_01_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.339 x 7.381 at 3.303 degrees (North through East) ! Clean map min=-0.0030988 max=0.35498 Jy/beam ! Writing clean map to FITS file: J0839+0104_S_2017_05_01_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.354978 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000366816 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.310005 0.310005 0.620009 1.24002 2.48004 4.96007 9.92015 19.8403 39.6806 79.3612 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0011 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.354 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.339 x 7.381 at 3.303 degrees (North through East) ! Clean map min=-0.0030988 max=0.35498 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J0839+0104_S_2017_05_01_pus_uvs.log closed on Wed May 1 18:32:03 2019