! Started logfile: J0838-3836_S_2017_04_28_pus_uvs.log on Thu May 2 16:21:54 2019 obs J0838-3836_S_2017_04_28_pus_uva.fits ! Reading UV FITS file: J0838-3836_S_2017_04_28_pus_uva.fits ! AN table 1: 95 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.565146 visibilities/baseline/integration-bin. ! Found source: J0838-3836 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 671 lines of history. ! ! Reading 9664 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J0838-3836_S_2017_04_28_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 303 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 288 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 348 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 581 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.958408Jy sigma=0.024156 ! Fit after self-cal, rms=0.908122Jy sigma=0.024103 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.596 mas, bmaj=7.952 mas, bpa=-7.042 degrees ! Estimated noise=1910.06 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0561267 Jy ! Component: 100 - total flux cleaned = 0.075728 Jy ! Total flux subtracted in 100 components = 0.075728 Jy ! Clean residual min=-0.018795 max=0.019228 Jy/beam ! Clean residual mean=0.000236 rms=0.006245 Jy/beam ! Combined flux in latest and established models = 0.075728 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 9 components and 0.075728 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.153916Jy sigma=0.001782 ! Fit after self-cal, rms=0.153684Jy sigma=0.001730 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.429 mas, bmaj=10.07 mas, bpa=-6.103 degrees ! Estimated noise=1082.43 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00913992 Jy ! Component: 100 - total flux cleaned = -0.00981266 Jy ! Component: 150 - total flux cleaned = -0.0103851 Jy ! Component: 200 - total flux cleaned = -0.0109069 Jy ! Total flux subtracted in 200 components = -0.0109069 Jy ! Clean residual min=-0.020227 max=0.022331 Jy/beam ! Clean residual mean=0.000663 rms=0.007350 Jy/beam ! Combined flux in latest and established models = 0.0648211 Jy ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 16 components and 0.0648211 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.154408Jy sigma=0.001545 ! Fit after self-cal, rms=0.154247Jy sigma=0.001545 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! A total of 90 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.66 FD 0.72 HN 1.00 KP 0.80 ! LA 0.74 MK 0.80 NL 0.85 OV 0.83 ! PT 0.78 SC 0.96 ! ! ! Correcting IF 2. ! A total of 45 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.75 FD 0.72 HN 0.83 KP 0.72 ! LA 0.72 MK 0.84 NL 0.96 OV 0.76 ! PT 0.89 SC 1.07 ! ! ! Correcting IF 3. ! A total of 45 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.67 FD 0.71 HN 1.16 KP 0.77 ! LA 0.68 MK 0.79 NL 0.89 OV 0.73 ! PT 0.75 SC 1.10 ! ! ! Correcting IF 4. ! A total of 102 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.79 FD 1.08 HN 0.59 KP 1.00* ! LA 18.83 MK 0.70 NL 1.00* OV 1.00* ! PT 1.11 SC 1.00* ! ! ! Fit before self-cal, rms=0.154247Jy sigma=0.001545 ! Fit after self-cal, rms=0.307633Jy sigma=0.000655 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.303 mas, bmaj=9.393 mas, bpa=-2.693 degrees ! Estimated noise=1103.21 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0010789 Jy ! Component: 100 - total flux cleaned = 0.00116678 Jy ! Component: 150 - total flux cleaned = 0.00122275 Jy ! Component: 200 - total flux cleaned = 0.00123977 Jy ! Total flux subtracted in 200 components = 0.00123977 Jy ! Clean residual min=-0.003020 max=0.003219 Jy/beam ! Clean residual mean=-0.000083 rms=0.000762 Jy/beam ! Combined flux in latest and established models = 0.0660609 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 24 components and 0.0660609 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.307589Jy sigma=0.000655 ! Fit after self-cal, rms=0.308195Jy sigma=0.000651 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.308195Jy sigma=0.000651 ! Fit after self-cal, rms=0.408521Jy sigma=0.000649 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.308 mas, bmaj=9.411 mas, bpa=-3.546 degrees ! Estimated noise=1095.31 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000896624 Jy ! Component: 100 - total flux cleaned = 0.00102086 Jy ! Component: 150 - total flux cleaned = 0.0010208 Jy ! Component: 200 - total flux cleaned = 0.00102173 Jy ! Total flux subtracted in 200 components = 0.00102173 Jy ! Clean residual min=-0.002680 max=0.003058 Jy/beam ! Clean residual mean=-0.000076 rms=0.000706 Jy/beam ! Combined flux in latest and established models = 0.0670826 Jy selfcal ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 36 components and 0.0670826 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.408491Jy sigma=0.000649 ! Fit after self-cal, rms=0.408636Jy sigma=0.000648 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000221462 Jy ! Component: 100 - total flux cleaned = 0.000236198 Jy ! Component: 150 - total flux cleaned = 0.000236395 Jy ! Component: 200 - total flux cleaned = 0.000248627 Jy ! Total flux subtracted in 200 components = 0.000248627 Jy ! Clean residual min=-0.002732 max=0.002964 Jy/beam ! Clean residual mean=-0.000069 rms=0.000706 Jy/beam ! Combined flux in latest and established models = 0.0673312 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 38 components and 0.0673312 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.408628Jy sigma=0.000648 ! Fit after self-cal, rms=0.408631Jy sigma=0.000648 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.408631Jy sigma=0.000648 ! Fit after self-cal, rms=0.105044Jy sigma=0.000647 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.299 mas, bmaj=9.384 mas, bpa=-3.483 degrees ! Estimated noise=1097.8 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000500249 Jy ! Component: 100 - total flux cleaned = 0.000499679 Jy ! Component: 150 - total flux cleaned = 0.000500042 Jy ! Component: 200 - total flux cleaned = 0.000500232 Jy ! Total flux subtracted in 200 components = 0.000500232 Jy ! Clean residual min=-0.002813 max=0.002784 Jy/beam ! Clean residual mean=-0.000062 rms=0.000676 Jy/beam ! Combined flux in latest and established models = 0.0678315 Jy selfcal ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 41 components and 0.0678315 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.105036Jy sigma=0.000647 ! Fit after self-cal, rms=0.105033Jy sigma=0.000646 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 6.53399e-05 Jy ! Component: 100 - total flux cleaned = 7.79783e-05 Jy ! Component: 150 - total flux cleaned = 8.86474e-05 Jy ! Component: 200 - total flux cleaned = 9.81954e-05 Jy ! Total flux subtracted in 200 components = 9.81954e-05 Jy ! Clean residual min=-0.002866 max=0.002809 Jy/beam ! Clean residual mean=-0.000064 rms=0.000674 Jy/beam ! Combined flux in latest and established models = 0.0679297 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 42 components and 0.0679297 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.105029Jy sigma=0.000646 ! Fit after self-cal, rms=0.105032Jy sigma=0.000646 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.105032Jy sigma=0.000646 ! Fit after self-cal, rms=0.104996Jy sigma=0.000646 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=9.008 mas, bmaj=29.34 mas, bpa=0.4945 degrees ! Estimated noise=1297.71 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000873071 Jy ! Component: 100 - total flux cleaned = 0.00101026 Jy ! Component: 150 - total flux cleaned = 0.00102295 Jy ! Component: 200 - total flux cleaned = 0.00104647 Jy ! Total flux subtracted in 200 components = 0.00104647 Jy ! Clean residual min=-0.002830 max=0.002812 Jy/beam ! Clean residual mean=-0.000101 rms=0.000770 Jy/beam ! Combined flux in latest and established models = 0.0689761 Jy selfcal ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 46 components and 0.0689761 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.104994Jy sigma=0.000646 ! Fit after self-cal, rms=0.105004Jy sigma=0.000646 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 1.12609e-05 Jy ! Component: 100 - total flux cleaned = 2.25657e-05 Jy ! Component: 150 - total flux cleaned = 4.47846e-05 Jy ! Component: 200 - total flux cleaned = 6.60521e-05 Jy ! Total flux subtracted in 200 components = 6.60521e-05 Jy ! Clean residual min=-0.002830 max=0.002820 Jy/beam ! Clean residual mean=-0.000102 rms=0.000768 Jy/beam ! Combined flux in latest and established models = 0.0690422 Jy ! Performing phase self-cal ! Adding 5 model components to the UV plane model. ! The established model now contains 46 components and 0.0690422 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.105005Jy sigma=0.000646 ! Fit after self-cal, rms=0.105008Jy sigma=0.000646 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.29 mas, bmaj=9.354 mas, bpa=-3.35 degrees ! Estimated noise=1101.16 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.29 x 9.354 at -3.35 degrees (North through East) ! Clean map min=-0.0046434 max=0.071937 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.778 mas, bmaj=8.188 mas, bpa=-1.753 degrees ! Estimated noise=1824.75 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0526926 Jy ! Component: 100 - total flux cleaned = 0.0653455 Jy ! Component: 150 - total flux cleaned = 0.0694203 Jy ! Component: 200 - total flux cleaned = 0.0695357 Jy ! Total flux subtracted in 200 components = 0.0695357 Jy ! Clean residual min=-0.004835 max=0.004947 Jy/beam ! Clean residual mean=-0.000026 rms=0.001295 Jy/beam ! Combined flux in latest and established models = 0.0695357 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 13 model components to the UV plane model. ! The established model now contains 13 components and 0.0695357 Jy ! Inverting map and beam ! Estimated beam: bmin=3.29 mas, bmaj=9.354 mas, bpa=-3.35 degrees ! Estimated noise=1101.16 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (23.5, 36.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00130618 Jy ! Component: 100 - total flux cleaned = 0.00129161 Jy ! Component: 150 - total flux cleaned = 0.00135028 Jy ! Component: 200 - total flux cleaned = 0.00145295 Jy ! Total flux subtracted in 200 components = 0.00145295 Jy ! Clean residual min=-0.002760 max=0.002838 Jy/beam ! Clean residual mean=-0.000052 rms=0.000683 Jy/beam ! Combined flux in latest and established models = 0.0709886 Jy ! Adding 15 model components to the UV plane model. ! The established model now contains 27 components and 0.0709886 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=9.008 mas, bmaj=29.34 mas, bpa=0.4945 degrees ! Estimated noise=1297.71 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000179576 Jy ! Component: 100 - total flux cleaned = 0.000273865 Jy ! Component: 150 - total flux cleaned = 0.000359517 Jy ! Component: 200 - total flux cleaned = 0.000437249 Jy ! Total flux subtracted in 200 components = 0.000437249 Jy ! Clean residual min=-0.002847 max=0.002688 Jy/beam ! Clean residual mean=-0.000087 rms=0.000740 Jy/beam ! Combined flux in latest and established models = 0.0714259 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 6.98339e-05 Jy ! Component: 100 - total flux cleaned = 0.000133299 Jy ! Component: 150 - total flux cleaned = 0.000172191 Jy ! Component: 200 - total flux cleaned = 0.000190114 Jy ! Total flux subtracted in 200 components = 0.000190114 Jy ! Clean residual min=-0.002803 max=0.002628 Jy/beam ! Clean residual mean=-0.000084 rms=0.000731 Jy/beam ! Combined flux in latest and established models = 0.071616 Jy ! Adding 6 model components to the UV plane model. ! The established model now contains 33 components and 0.071616 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.29 mas, bmaj=9.354 mas, bpa=-3.35 degrees ! Estimated noise=1101.16 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000155403 Jy ! Component: 100 - total flux cleaned = -0.00015528 Jy ! Component: 150 - total flux cleaned = -0.000115663 Jy ! Component: 200 - total flux cleaned = -7.99202e-05 Jy ! Total flux subtracted in 200 components = -7.99202e-05 Jy ! Clean residual min=-0.002719 max=0.002627 Jy/beam ! Clean residual mean=-0.000048 rms=0.000657 Jy/beam ! Combined flux in latest and established models = 0.0715361 Jy selfcal ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 43 components and 0.0715361 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.105004Jy sigma=0.000646 ! Fit after self-cal, rms=0.105082Jy sigma=0.000646 wmodel J0838-3836_S_2017_04_28_pus_map.mod ! Writing 43 model components to file: J0838-3836_S_2017_04_28_pus_map.mod wobs J0838-3836_S_2017_04_28_pus_uvs.fits ! Writing UV FITS file: J0838-3836_S_2017_04_28_pus_uvs.fits wwins J0838-3836_S_2017_04_28_pus_map.win ! wwins: Wrote 2 windows to J0838-3836_S_2017_04_28_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000267744 Jy ! Component: 100 - total flux cleaned = -0.000136827 Jy ! Component: 150 - total flux cleaned = -5.41792e-05 Jy ! Component: 200 - total flux cleaned = -5.47512e-05 Jy ! Component: 250 - total flux cleaned = -8.94721e-05 Jy ! Component: 300 - total flux cleaned = -0.000262314 Jy ! Component: 350 - total flux cleaned = -0.000395329 Jy ! Component: 400 - total flux cleaned = -0.000587763 Jy ! Component: 450 - total flux cleaned = -0.000835719 Jy ! Component: 500 - total flux cleaned = -0.0011365 Jy ! Component: 550 - total flux cleaned = -0.00139957 Jy ! Component: 600 - total flux cleaned = -0.0016836 Jy ! Component: 650 - total flux cleaned = -0.00193252 Jy ! Component: 700 - total flux cleaned = -0.00217529 Jy ! Component: 750 - total flux cleaned = -0.0023594 Jy ! Component: 800 - total flux cleaned = -0.00253878 Jy ! Component: 850 - total flux cleaned = -0.00268882 Jy ! Component: 900 - total flux cleaned = -0.0028854 Jy ! Component: 950 - total flux cleaned = -0.00307817 Jy ! Component: 1000 - total flux cleaned = -0.00329095 Jy ! Component: 1050 - total flux cleaned = -0.00349938 Jy ! Component: 1100 - total flux cleaned = -0.00377161 Jy ! Component: 1150 - total flux cleaned = -0.00394981 Jy ! Component: 1200 - total flux cleaned = -0.00423478 Jy ! Component: 1250 - total flux cleaned = -0.00442898 Jy ! Component: 1300 - total flux cleaned = -0.00457818 Jy ! Component: 1350 - total flux cleaned = -0.00476686 Jy ! Component: 1400 - total flux cleaned = -0.00489085 Jy ! Component: 1450 - total flux cleaned = -0.00499292 Jy ! Component: 1500 - total flux cleaned = -0.00517403 Jy ! Component: 1550 - total flux cleaned = -0.00519402 Jy ! Component: 1600 - total flux cleaned = -0.00529211 Jy ! Component: 1650 - total flux cleaned = -0.00527261 Jy ! Component: 1700 - total flux cleaned = -0.00534922 Jy ! Component: 1750 - total flux cleaned = -0.00534914 Jy ! Component: 1800 - total flux cleaned = -0.00540475 Jy ! Component: 1850 - total flux cleaned = -0.00538612 Jy ! Component: 1900 - total flux cleaned = -0.0054409 Jy ! Component: 1950 - total flux cleaned = -0.00545908 Jy ! Component: 2000 - total flux cleaned = -0.00545906 Jy ! Component: 2050 - total flux cleaned = -0.00547685 Jy ! Component: 2100 - total flux cleaned = -0.00551187 Jy ! Component: 2150 - total flux cleaned = -0.00552914 Jy ! Component: 2200 - total flux cleaned = -0.00551203 Jy ! Component: 2250 - total flux cleaned = -0.0055801 Jy ! Component: 2300 - total flux cleaned = -0.0055293 Jy ! Component: 2350 - total flux cleaned = -0.00556276 Jy ! Component: 2400 - total flux cleaned = -0.00557925 Jy ! Component: 2450 - total flux cleaned = -0.00557907 Jy ! Component: 2500 - total flux cleaned = -0.00561156 Jy ! Component: 2550 - total flux cleaned = -0.00565995 Jy ! Component: 2600 - total flux cleaned = -0.00565988 Jy ! Component: 2650 - total flux cleaned = -0.00567583 Jy ! Component: 2700 - total flux cleaned = -0.00570719 Jy ! Component: 2750 - total flux cleaned = -0.00570706 Jy ! Component: 2800 - total flux cleaned = -0.00573784 Jy ! Component: 2850 - total flux cleaned = -0.00578393 Jy ! Component: 2900 - total flux cleaned = -0.00582946 Jy ! Component: 2950 - total flux cleaned = -0.00582952 Jy ! Component: 3000 - total flux cleaned = -0.00587468 Jy ! Component: 3050 - total flux cleaned = -0.00594943 Jy ! Component: 3100 - total flux cleaned = -0.00596432 Jy ! Component: 3150 - total flux cleaned = -0.00599391 Jy ! Component: 3200 - total flux cleaned = -0.00603782 Jy ! Component: 3250 - total flux cleaned = -0.00609597 Jy ! Component: 3300 - total flux cleaned = -0.00612487 Jy ! Component: 3350 - total flux cleaned = -0.00616792 Jy ! Component: 3400 - total flux cleaned = -0.00619639 Jy ! Component: 3450 - total flux cleaned = -0.00616805 Jy ! Component: 3500 - total flux cleaned = -0.0062102 Jy ! Component: 3550 - total flux cleaned = -0.0062382 Jy ! Component: 3600 - total flux cleaned = -0.00625201 Jy ! Component: 3650 - total flux cleaned = -0.00621037 Jy ! Component: 3700 - total flux cleaned = -0.00618296 Jy ! Component: 3750 - total flux cleaned = -0.00623781 Jy ! Component: 3800 - total flux cleaned = -0.00619703 Jy ! Component: 3850 - total flux cleaned = -0.00621066 Jy ! Component: 3900 - total flux cleaned = -0.00622407 Jy ! Component: 3950 - total flux cleaned = -0.00622403 Jy ! Component: 4000 - total flux cleaned = -0.00622413 Jy ! Component: 4050 - total flux cleaned = -0.00626398 Jy ! Total flux subtracted in 4096 components = -0.00627728 Jy ! Clean residual min=-0.000858 max=0.000845 Jy/beam ! Clean residual mean=-0.000006 rms=0.000240 Jy/beam ! Combined flux in latest and established models = 0.0652588 Jy keep ! Adding 256 model components to the UV plane model. ! The established model now contains 299 components and 0.0652588 Jy ![Exited script file: muppet] wmap "J0838-3836_S_2017_04_28_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.29 x 9.354 at -3.35 degrees (North through East) ! Clean map min=-0.0024183 max=0.068218 Jy/beam ! Writing clean map to FITS file: J0838-3836_S_2017_04_28_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.0682185 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000241605 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -1.06249 1.06249 2.12498 4.24996 8.49992 16.9998 33.9997 67.9994 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0007 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.068 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.29 x 9.354 at -3.35 degrees (North through East) ! Clean map min=-0.0024183 max=0.068218 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J0838-3836_S_2017_04_28_pus_uvs.log closed on Thu May 2 16:21:59 2019