! Started logfile: J0836-2016_X_2017_05_27_pus_uvs.log on Fri May 3 10:32:38 2019 obs J0836-2016_X_2017_05_27_pus_uva.fits ! Reading UV FITS file: J0836-2016_X_2017_05_27_pus_uva.fits ! AN table 1: 49 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.518367 visibilities/baseline/integration-bin. ! Found source: J0836-2016 ! ! There are 12 IFs, and a total of 12 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.44388e+09 3.2e+07 1 3.2e+07 ! 02 2 8.47588e+09 3.2e+07 1 3.2e+07 ! 03 3 8.50788e+09 3.2e+07 1 3.2e+07 ! 04 4 8.53988e+09 3.2e+07 1 3.2e+07 ! 05 5 8.60388e+09 3.2e+07 1 3.2e+07 ! 06 6 8.63588e+09 3.2e+07 1 3.2e+07 ! 07 7 8.69988e+09 3.2e+07 1 3.2e+07 ! 08 8 8.73188e+09 3.2e+07 1 3.2e+07 ! 09 9 8.79588e+09 3.2e+07 1 3.2e+07 ! 10 10 8.82788e+09 3.2e+07 1 3.2e+07 ! 11 11 8.85988e+09 3.2e+07 1 3.2e+07 ! 12 12 8.89188e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 1033 lines of history. ! ! Reading 13716 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..12 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ! Reading IF 5 channels: 5..5 ! Reading IF 6 channels: 6..6 ! Reading IF 7 channels: 7..7 ! Reading IF 8 channels: 8..8 ! Reading IF 9 channels: 9..9 ! Reading IF 10 channels: 10..10 ! Reading IF 11 channels: 11..11 ! Reading IF 12 channels: 12..12 print "field_size =",field_size ! field_size = 512 print "field_cell =",field_cell ! field_cell = 0.2 print "taper_size =",taper_size ! taper_size = 70 ![@muppet J0836-2016_X_2017_05_27_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 512x512 pixels with 0.200x0.200 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 218 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 218 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 218 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 218 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 5. ! A total of 218 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 6. ! A total of 218 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 7. ! A total of 218 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 8. ! A total of 218 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 9. ! A total of 218 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 10. ! A total of 218 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 11. ! A total of 218 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 12. ! A total of 218 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.297908Jy sigma=0.002355 ! Fit after self-cal, rms=0.267999Jy sigma=0.002114 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Your choice of large map pixels excluded 0.0667% of the data. ! The x-axis pixel size should ideally be below 0.1994 milli-arcsec ! Estimated beam: bmin=0.6929 mas, bmaj=1.791 mas, bpa=-2.725 degrees ! Estimated noise=1194.06 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.820287 Jy ! Component: 100 - total flux cleaned = 1.04591 Jy ! Total flux subtracted in 100 components = 1.04591 Jy ! Clean residual min=-0.029545 max=0.103380 Jy/beam ! Clean residual mean=0.000320 rms=0.010329 Jy/beam ! Combined flux in latest and established models = 1.04591 Jy ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 8 components and 1.04591 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.231020Jy sigma=0.001828 ! Fit after self-cal, rms=0.231019Jy sigma=0.001827 ! Inverting map ! Your choice of large map pixels excluded 0.0667% of the data. ! The x-axis pixel size should ideally be below 0.1994 milli-arcsec ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.116712 Jy ! Component: 100 - total flux cleaned = 0.179963 Jy ! Total flux subtracted in 100 components = 0.179963 Jy ! Clean residual min=-0.014490 max=0.031192 Jy/beam ! Clean residual mean=0.000149 rms=0.004518 Jy/beam ! Combined flux in latest and established models = 1.22587 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 14 components and 1.22587 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.131344Jy sigma=0.001001 ! Fit after self-cal, rms=0.131317Jy sigma=0.001001 ! Inverting map ! Your choice of large map pixels excluded 0.0667% of the data. ! The x-axis pixel size should ideally be below 0.1994 milli-arcsec ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0368801 Jy ! Component: 100 - total flux cleaned = 0.0595626 Jy ! Total flux subtracted in 100 components = 0.0595626 Jy ! Clean residual min=-0.011942 max=0.019591 Jy/beam ! Clean residual mean=0.000093 rms=0.003258 Jy/beam ! Combined flux in latest and established models = 1.28544 Jy ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 32 components and 1.28543 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.113763Jy sigma=0.000844 ! Fit after self-cal, rms=0.113763Jy sigma=0.000844 ! Inverting map ! Your choice of large map pixels excluded 0.0667% of the data. ! The x-axis pixel size should ideally be below 0.1994 milli-arcsec ! Added new window around map position (-3, -0.6). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0194917 Jy ! Component: 100 - total flux cleaned = 0.0329388 Jy ! Total flux subtracted in 100 components = 0.0329388 Jy ! Clean residual min=-0.011914 max=0.013413 Jy/beam ! Clean residual mean=0.000064 rms=0.002805 Jy/beam ! Combined flux in latest and established models = 1.31837 Jy ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 42 components and 1.31837 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.108012Jy sigma=0.000791 ! Fit after self-cal, rms=0.107843Jy sigma=0.000789 ! Inverting map ! Your choice of large map pixels excluded 0.0667% of the data. ! The x-axis pixel size should ideally be below 0.1994 milli-arcsec print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Your choice of large map pixels excluded 0.0667% of the data. ! The x-axis pixel size should ideally be below 0.1994 milli-arcsec ! Estimated beam: bmin=0.8813 mas, bmaj=2.198 mas, bpa=-0.8149 degrees ! Estimated noise=791.889 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-1.4, -0.2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0242373 Jy ! Component: 100 - total flux cleaned = 0.0393842 Jy ! Component: 150 - total flux cleaned = 0.0499183 Jy ! Component: 200 - total flux cleaned = 0.0568541 Jy ! Total flux subtracted in 200 components = 0.0568541 Jy ! Clean residual min=-0.009188 max=0.011242 Jy/beam ! Clean residual mean=0.000006 rms=0.002551 Jy/beam ! Combined flux in latest and established models = 1.37523 Jy ! Performing phase self-cal ! Adding 51 model components to the UV plane model. ! The established model now contains 84 components and 1.37523 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.101669Jy sigma=0.000736 ! Fit after self-cal, rms=0.101089Jy sigma=0.000730 ! Inverting map ! Your choice of large map pixels excluded 0.0667% of the data. ! The x-axis pixel size should ideally be below 0.1994 milli-arcsec print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.97 FD 1.00 HN 1.04 KP 0.97 ! LA 0.97 MK 0.99 NL 1.00 OV 1.00 ! PT 1.00 SC 1.01 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 0.98 FD 1.00 HN 1.01 KP 0.96 ! LA 0.97 MK 0.99 NL 1.00 OV 1.01 ! PT 0.99 SC 1.01 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.98 FD 1.00 HN 1.01 KP 0.97 ! LA 0.99 MK 1.01 NL 1.00 OV 1.01 ! PT 1.02 SC 1.01 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 0.97 FD 0.98 HN 1.04 KP 0.96 ! LA 1.00 MK 1.01 NL 0.99 OV 1.00 ! PT 1.04 SC 1.02 ! ! ! Correcting IF 5. ! Telescope amplitude corrections in sub-array 1: ! BR 0.98 FD 0.98 HN 1.00 KP 0.96 ! LA 0.99 MK 1.03 NL 0.99 OV 1.01 ! PT 1.03 SC 1.00 ! ! ! Correcting IF 6. ! Telescope amplitude corrections in sub-array 1: ! BR 0.98 FD 0.99 HN 1.04 KP 0.96 ! LA 0.99 MK 1.01 NL 0.99 OV 1.00 ! PT 1.02 SC 1.01 ! ! ! Correcting IF 7. ! Telescope amplitude corrections in sub-array 1: ! BR 0.98 FD 1.00 HN 1.03 KP 0.96 ! LA 1.00 MK 1.03 NL 1.00 OV 1.01 ! PT 1.03 SC 1.02 ! ! ! Correcting IF 8. ! Telescope amplitude corrections in sub-array 1: ! BR 0.97 FD 1.04 HN 1.03 KP 0.97 ! LA 0.98 MK 1.01 NL 1.00 OV 1.01 ! PT 1.04 SC 1.02 ! ! ! Correcting IF 9. ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 1.01 HN 1.03 KP 0.97 ! LA 1.00 MK 0.99 NL 1.00 OV 1.01 ! PT 1.00 SC 0.98 ! ! ! Correcting IF 10. ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 1.00 HN 1.02 KP 0.97 ! LA 1.02 MK 1.00 NL 1.00 OV 1.02 ! PT 1.04 SC 0.97 ! ! ! Correcting IF 11. ! Telescope amplitude corrections in sub-array 1: ! BR 0.97 FD 1.02 HN 1.06 KP 0.98 ! LA 1.01 MK 1.00 NL 1.01 OV 1.01 ! PT 1.05 SC 0.98 ! ! ! Correcting IF 12. ! Telescope amplitude corrections in sub-array 1: ! BR 0.97 FD 1.02 HN 1.02 KP 0.94 ! LA 1.00 MK 0.96 NL 1.01 OV 1.01 ! PT 1.05 SC 1.00 ! ! ! Fit before self-cal, rms=0.101089Jy sigma=0.000730 ! Fit after self-cal, rms=0.093909Jy sigma=0.000674 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Your choice of large map pixels excluded 0.0667% of the data. ! The x-axis pixel size should ideally be below 0.1994 milli-arcsec ! Estimated beam: bmin=0.8841 mas, bmaj=2.2 mas, bpa=-0.7594 degrees ! Estimated noise=789.686 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-4.6, -3.8). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0110717 Jy ! Component: 100 - total flux cleaned = 0.0178159 Jy ! Component: 150 - total flux cleaned = 0.0205293 Jy ! Component: 200 - total flux cleaned = 0.0217418 Jy ! Total flux subtracted in 200 components = 0.0217418 Jy ! Clean residual min=-0.004286 max=0.004632 Jy/beam ! Clean residual mean=-0.000027 rms=0.001303 Jy/beam ! Combined flux in latest and established models = 1.39697 Jy ! Performing phase self-cal ! Adding 40 model components to the UV plane model. ! The established model now contains 123 components and 1.39697 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.092402Jy sigma=0.000661 ! Fit after self-cal, rms=0.092337Jy sigma=0.000661 ! Inverting map ! Your choice of large map pixels excluded 0.0667% of the data. ! The x-axis pixel size should ideally be below 0.1994 milli-arcsec selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.092337Jy sigma=0.000661 ! Fit after self-cal, rms=0.090963Jy sigma=0.000649 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Your choice of large map pixels excluded 0.0667% of the data. ! The x-axis pixel size should ideally be below 0.1994 milli-arcsec ! Estimated beam: bmin=0.8843 mas, bmaj=2.201 mas, bpa=-0.7942 degrees ! Estimated noise=790.151 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00451456 Jy ! Component: 100 - total flux cleaned = 0.00758148 Jy ! Component: 150 - total flux cleaned = 0.00891447 Jy ! Component: 200 - total flux cleaned = 0.00938305 Jy ! Total flux subtracted in 200 components = 0.00938305 Jy ! Clean residual min=-0.002735 max=0.003320 Jy/beam ! Clean residual mean=-0.000000 rms=0.000782 Jy/beam ! Combined flux in latest and established models = 1.40635 Jy selfcal ! Performing phase self-cal ! Adding 36 model components to the UV plane model. ! The established model now contains 158 components and 1.40635 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.090690Jy sigma=0.000647 ! Fit after self-cal, rms=0.090678Jy sigma=0.000647 flux_cutoff = imstat(rms) * dynam ! Inverting map ! Your choice of large map pixels excluded 0.0667% of the data. ! The x-axis pixel size should ideally be below 0.1994 milli-arcsec repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (7.4, -14). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00293892 Jy ! Component: 100 - total flux cleaned = 0.00370111 Jy ! Component: 150 - total flux cleaned = 0.00402945 Jy ! Component: 200 - total flux cleaned = 0.00432325 Jy ! Total flux subtracted in 200 components = 0.00432325 Jy ! Clean residual min=-0.002481 max=0.002750 Jy/beam ! Clean residual mean=0.000005 rms=0.000707 Jy/beam ! Combined flux in latest and established models = 1.41068 Jy ! Performing phase self-cal ! Adding 30 model components to the UV plane model. ! The established model now contains 176 components and 1.41068 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.090531Jy sigma=0.000646 ! Fit after self-cal, rms=0.090524Jy sigma=0.000646 ! Inverting map ! Your choice of large map pixels excluded 0.0667% of the data. ! The x-axis pixel size should ideally be below 0.1994 milli-arcsec selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.090524Jy sigma=0.000646 ! Fit after self-cal, rms=0.090174Jy sigma=0.000642 clean clean_niter,clean_gain ! Inverting map and beam ! Your choice of large map pixels excluded 0.0667% of the data. ! The x-axis pixel size should ideally be below 0.1994 milli-arcsec ! Estimated beam: bmin=0.8846 mas, bmaj=2.202 mas, bpa=-0.8056 degrees ! Estimated noise=790.311 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00145267 Jy ! Component: 100 - total flux cleaned = 0.00199237 Jy ! Component: 150 - total flux cleaned = 0.0021481 Jy ! Component: 200 - total flux cleaned = 0.00228914 Jy ! Total flux subtracted in 200 components = 0.00228914 Jy ! Clean residual min=-0.002305 max=0.002701 Jy/beam ! Clean residual mean=0.000001 rms=0.000611 Jy/beam ! Combined flux in latest and established models = 1.41297 Jy selfcal ! Performing phase self-cal ! Adding 35 model components to the UV plane model. ! The established model now contains 196 components and 1.41296 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.090097Jy sigma=0.000642 ! Fit after self-cal, rms=0.090093Jy sigma=0.000642 flux_cutoff = imstat(rms) * dynam ! Inverting map ! Your choice of large map pixels excluded 0.0667% of the data. ! The x-axis pixel size should ideally be below 0.1994 milli-arcsec repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-8.4, -1.6). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00203729 Jy ! Component: 100 - total flux cleaned = 0.00244447 Jy ! Component: 150 - total flux cleaned = 0.00273902 Jy ! Component: 200 - total flux cleaned = 0.00296276 Jy ! Total flux subtracted in 200 components = 0.00296276 Jy ! Clean residual min=-0.002242 max=0.002198 Jy/beam ! Clean residual mean=-0.000002 rms=0.000569 Jy/beam ! Combined flux in latest and established models = 1.41593 Jy ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 209 components and 1.41593 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.090004Jy sigma=0.000641 ! Fit after self-cal, rms=0.090001Jy sigma=0.000641 ! Inverting map ! Your choice of large map pixels excluded 0.0667% of the data. ! The x-axis pixel size should ideally be below 0.1994 milli-arcsec uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.090001Jy sigma=0.000641 ! Fit after self-cal, rms=0.090016Jy sigma=0.000641 clean clean_niter,clean_gain ! Inverting map and beam ! Your choice of large map pixels excluded 0.0667% of the data. ! The x-axis pixel size should ideally be below 0.1994 milli-arcsec ! Estimated beam: bmin=2.252 mas, bmaj=4.564 mas, bpa=-3.04 degrees ! Estimated noise=999.709 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00123926 Jy ! Component: 100 - total flux cleaned = 0.00168143 Jy ! Component: 150 - total flux cleaned = 0.00199944 Jy ! Component: 200 - total flux cleaned = 0.00211957 Jy ! Total flux subtracted in 200 components = 0.00211957 Jy ! Clean residual min=-0.002442 max=0.002757 Jy/beam ! Clean residual mean=0.000004 rms=0.000669 Jy/beam ! Combined flux in latest and established models = 1.41805 Jy selfcal ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 223 components and 1.41805 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.089988Jy sigma=0.000641 ! Fit after self-cal, rms=0.089983Jy sigma=0.000641 flux_cutoff = imstat(rms) * dynam ! Inverting map ! Your choice of large map pixels excluded 0.0667% of the data. ! The x-axis pixel size should ideally be below 0.1994 milli-arcsec repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000375265 Jy ! Component: 100 - total flux cleaned = 0.000517448 Jy ! Component: 150 - total flux cleaned = 0.000518554 Jy ! Component: 200 - total flux cleaned = 0.000548225 Jy ! Total flux subtracted in 200 components = 0.000548225 Jy ! Clean residual min=-0.002385 max=0.002655 Jy/beam ! Clean residual mean=0.000002 rms=0.000647 Jy/beam ! Combined flux in latest and established models = 1.4186 Jy ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 231 components and 1.4186 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.089971Jy sigma=0.000641 ! Fit after self-cal, rms=0.089970Jy sigma=0.000641 ! Inverting map ! Your choice of large map pixels excluded 0.0667% of the data. ! The x-axis pixel size should ideally be below 0.1994 milli-arcsec uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Your choice of large map pixels excluded 0.0667% of the data. ! The x-axis pixel size should ideally be below 0.1994 milli-arcsec ! Estimated beam: bmin=0.8849 mas, bmaj=2.202 mas, bpa=-0.8076 degrees ! Estimated noise=790.444 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8849 x 2.202 at -0.8076 degrees (North through East) ! Clean map min=-0.002001 max=1.1158 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.089970Jy sigma=0.000641 ! Fit after self-cal, rms=0.084382Jy sigma=0.000596 ! Inverting map and beam ! Your choice of large map pixels excluded 0.0667% of the data. ! The x-axis pixel size should ideally be below 0.1994 milli-arcsec ! Estimated beam: bmin=0.8853 mas, bmaj=2.203 mas, bpa=-0.8022 degrees ! Estimated noise=790.433 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 2.1257e-05 Jy ! Component: 100 - total flux cleaned = 2.33833e-05 Jy ! Component: 150 - total flux cleaned = 2.48141e-05 Jy ! Component: 200 - total flux cleaned = 6.19139e-05 Jy ! Total flux subtracted in 200 components = 6.19139e-05 Jy ! Clean residual min=-0.001990 max=0.002017 Jy/beam ! Clean residual mean=0.000001 rms=0.000510 Jy/beam ! Combined flux in latest and established models = 1.41866 Jy ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 242 components and 1.41866 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.084331Jy sigma=0.000596 ! Fit after self-cal, rms=0.084328Jy sigma=0.000596 ! Inverting map ! Your choice of large map pixels excluded 0.0667% of the data. ! The x-axis pixel size should ideally be below 0.1994 milli-arcsec ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000243025 Jy ! Component: 100 - total flux cleaned = 0.000207803 Jy ! Component: 150 - total flux cleaned = 0.000208171 Jy ! Component: 200 - total flux cleaned = 0.000269964 Jy ! Total flux subtracted in 200 components = 0.000269964 Jy ! Clean residual min=-0.001966 max=0.001954 Jy/beam ! Clean residual mean=0.000000 rms=0.000501 Jy/beam ! Combined flux in latest and established models = 1.41893 Jy ! Performing phase self-cal ! Adding 39 model components to the UV plane model. ! The established model now contains 252 components and 1.41893 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.084301Jy sigma=0.000596 ! Fit after self-cal, rms=0.084300Jy sigma=0.000596 ! Inverting map ! Your choice of large map pixels excluded 0.0667% of the data. ! The x-axis pixel size should ideally be below 0.1994 milli-arcsec ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.084300Jy sigma=0.000596 ! Fit after self-cal, rms=0.084313Jy sigma=0.000596 print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Your choice of large map pixels excluded 0.0667% of the data. ! The x-axis pixel size should ideally be below 0.1994 milli-arcsec ! Estimated beam: bmin=0.6953 mas, bmaj=1.793 mas, bpa=-2.77 degrees ! Estimated noise=1195.74 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.821385 Jy ! Component: 100 - total flux cleaned = 1.04465 Jy ! Component: 150 - total flux cleaned = 1.15946 Jy ! Component: 200 - total flux cleaned = 1.22167 Jy ! Total flux subtracted in 200 components = 1.22167 Jy ! Clean residual min=-0.010659 max=0.030481 Jy/beam ! Clean residual mean=0.000175 rms=0.003861 Jy/beam ! Combined flux in latest and established models = 1.22168 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 13 model components to the UV plane model. ! The established model now contains 13 components and 1.22168 Jy ! Inverting map and beam ! Your choice of large map pixels excluded 0.0667% of the data. ! The x-axis pixel size should ideally be below 0.1994 milli-arcsec ! Estimated beam: bmin=0.8854 mas, bmaj=2.203 mas, bpa=-0.8079 degrees ! Estimated noise=790.467 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0569103 Jy ! Component: 100 - total flux cleaned = 0.0921847 Jy ! Component: 150 - total flux cleaned = 0.116058 Jy ! Component: 200 - total flux cleaned = 0.132651 Jy ! Total flux subtracted in 200 components = 0.132651 Jy ! Clean residual min=-0.005114 max=0.009567 Jy/beam ! Clean residual mean=0.000046 rms=0.002215 Jy/beam ! Combined flux in latest and established models = 1.35433 Jy ! Adding 62 model components to the UV plane model. ! The established model now contains 66 components and 1.35433 Jy ! Inverting map ! Your choice of large map pixels excluded 0.0667% of the data. ! The x-axis pixel size should ideally be below 0.1994 milli-arcsec ! Added new window around map position (-3.8, -0.2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.012238 Jy ! Component: 100 - total flux cleaned = 0.0215033 Jy ! Component: 150 - total flux cleaned = 0.0287199 Jy ! Component: 200 - total flux cleaned = 0.0344818 Jy ! Total flux subtracted in 200 components = 0.0344818 Jy ! Clean residual min=-0.003126 max=0.003576 Jy/beam ! Clean residual mean=0.000016 rms=0.001077 Jy/beam ! Combined flux in latest and established models = 1.38881 Jy ! Adding 75 model components to the UV plane model. ! The established model now contains 127 components and 1.38881 Jy ! Inverting map ! Your choice of large map pixels excluded 0.0667% of the data. ! The x-axis pixel size should ideally be below 0.1994 milli-arcsec uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Your choice of large map pixels excluded 0.0667% of the data. ! The x-axis pixel size should ideally be below 0.1994 milli-arcsec ! Estimated beam: bmin=2.251 mas, bmaj=4.565 mas, bpa=-3.059 degrees ! Estimated noise=999.391 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00796741 Jy ! Component: 100 - total flux cleaned = 0.0133139 Jy ! Component: 150 - total flux cleaned = 0.0172964 Jy ! Component: 200 - total flux cleaned = 0.0203798 Jy ! Total flux subtracted in 200 components = 0.0203798 Jy ! Clean residual min=-0.002497 max=0.002955 Jy/beam ! Clean residual mean=0.000012 rms=0.000885 Jy/beam ! Combined flux in latest and established models = 1.40919 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0024372 Jy ! Component: 100 - total flux cleaned = 0.00437713 Jy ! Component: 150 - total flux cleaned = 0.00594245 Jy ! Component: 200 - total flux cleaned = 0.00722261 Jy ! Total flux subtracted in 200 components = 0.00722261 Jy ! Clean residual min=-0.002328 max=0.002832 Jy/beam ! Clean residual mean=0.000008 rms=0.000661 Jy/beam ! Combined flux in latest and established models = 1.41641 Jy ! Adding 117 model components to the UV plane model. ! The established model now contains 224 components and 1.41641 Jy ! Inverting map ! Your choice of large map pixels excluded 0.0667% of the data. ! The x-axis pixel size should ideally be below 0.1994 milli-arcsec ! Added new window around map position (3.8, 3.6). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00224477 Jy ! Component: 100 - total flux cleaned = 0.00271328 Jy ! Component: 150 - total flux cleaned = 0.00315072 Jy ! Component: 200 - total flux cleaned = 0.00354186 Jy ! Total flux subtracted in 200 components = 0.00354186 Jy ! Clean residual min=-0.002003 max=0.001862 Jy/beam ! Clean residual mean=0.000006 rms=0.000536 Jy/beam ! Combined flux in latest and established models = 1.41995 Jy ! Adding 24 model components to the UV plane model. ! The established model now contains 240 components and 1.41995 Jy ! Inverting map ! Your choice of large map pixels excluded 0.0667% of the data. ! The x-axis pixel size should ideally be below 0.1994 milli-arcsec uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Your choice of large map pixels excluded 0.0667% of the data. ! The x-axis pixel size should ideally be below 0.1994 milli-arcsec ! Estimated beam: bmin=0.8854 mas, bmaj=2.203 mas, bpa=-0.8079 degrees ! Estimated noise=790.467 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00035393 Jy ! Component: 100 - total flux cleaned = 0.000713037 Jy ! Component: 150 - total flux cleaned = 0.000965816 Jy ! Component: 200 - total flux cleaned = 0.00114159 Jy ! Total flux subtracted in 200 components = 0.00114159 Jy ! Clean residual min=-0.002034 max=0.001683 Jy/beam ! Clean residual mean=0.000004 rms=0.000458 Jy/beam ! Combined flux in latest and established models = 1.42109 Jy selfcal ! Performing phase self-cal ! Adding 33 model components to the UV plane model. ! The established model now contains 272 components and 1.42109 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.084296Jy sigma=0.000596 ! Fit after self-cal, rms=0.084284Jy sigma=0.000596 wmodel J0836-2016_X_2017_05_27_pus_map.mod ! Writing 272 model components to file: J0836-2016_X_2017_05_27_pus_map.mod wobs J0836-2016_X_2017_05_27_pus_uvs.fits ! Writing UV FITS file: J0836-2016_X_2017_05_27_pus_uvs.fits wwins J0836-2016_X_2017_05_27_pus_map.win ! wwins: Wrote 8 windows to J0836-2016_X_2017_05_27_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! Your choice of large map pixels excluded 0.0667% of the data. ! The x-axis pixel size should ideally be below 0.1994 milli-arcsec ! clean: niter=2048 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000410792 Jy ! Component: 100 - total flux cleaned = -0.00037812 Jy ! Component: 150 - total flux cleaned = -0.000490298 Jy ! Component: 200 - total flux cleaned = -0.000706609 Jy ! Component: 250 - total flux cleaned = -0.000941323 Jy ! Component: 300 - total flux cleaned = -0.00109306 Jy ! Component: 350 - total flux cleaned = -0.00121623 Jy ! Component: 400 - total flux cleaned = -0.00128835 Jy ! Component: 450 - total flux cleaned = -0.00133514 Jy ! Component: 500 - total flux cleaned = -0.00133483 Jy ! Component: 550 - total flux cleaned = -0.00135758 Jy ! Component: 600 - total flux cleaned = -0.00137959 Jy ! Component: 650 - total flux cleaned = -0.00142285 Jy ! Component: 700 - total flux cleaned = -0.00142273 Jy ! Component: 750 - total flux cleaned = -0.00140167 Jy ! Component: 800 - total flux cleaned = -0.00148584 Jy ! Component: 850 - total flux cleaned = -0.00154771 Jy ! Component: 900 - total flux cleaned = -0.00166952 Jy ! Component: 950 - total flux cleaned = -0.00170946 Jy ! Component: 1000 - total flux cleaned = -0.00180866 Jy ! Component: 1050 - total flux cleaned = -0.00188751 Jy ! Component: 1100 - total flux cleaned = -0.00200372 Jy ! Component: 1150 - total flux cleaned = -0.00217591 Jy ! Component: 1200 - total flux cleaned = -0.00221329 Jy ! Component: 1250 - total flux cleaned = -0.00230725 Jy ! Component: 1300 - total flux cleaned = -0.00241883 Jy ! Component: 1350 - total flux cleaned = -0.00238227 Jy ! Component: 1400 - total flux cleaned = -0.00256438 Jy ! Component: 1450 - total flux cleaned = -0.0026545 Jy ! Component: 1500 - total flux cleaned = -0.00276154 Jy ! Component: 1550 - total flux cleaned = -0.00284998 Jy ! Component: 1600 - total flux cleaned = -0.00293775 Jy ! Component: 1650 - total flux cleaned = -0.00302461 Jy ! Component: 1700 - total flux cleaned = -0.00312786 Jy ! Component: 1750 - total flux cleaned = -0.00321324 Jy ! Component: 1800 - total flux cleaned = -0.00336575 Jy ! Component: 1850 - total flux cleaned = -0.00344953 Jy ! Component: 1900 - total flux cleaned = -0.00348267 Jy ! Component: 1950 - total flux cleaned = -0.00356551 Jy ! Component: 2000 - total flux cleaned = -0.00371291 Jy ! Total flux subtracted in 2048 components = -0.00376181 Jy ! Clean residual min=-0.001114 max=0.000901 Jy/beam ! Clean residual mean=0.000001 rms=0.000313 Jy/beam ! Combined flux in latest and established models = 1.41733 Jy keep ! Adding 149 model components to the UV plane model. ! The established model now contains 418 components and 1.41733 Jy ![Exited script file: muppet] wmap "J0836-2016_X_2017_05_27_pus\_map.fits" ! Inverting map ! Your choice of large map pixels excluded 0.0667% of the data. ! The x-axis pixel size should ideally be below 0.1994 milli-arcsec ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8854 x 2.203 at -0.8079 degrees (North through East) ! Clean map min=-0.0020999 max=1.1177 Jy/beam ! Writing clean map to FITS file: J0836-2016_X_2017_05_27_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 1.11772 invert ! Inverting map ! Your choice of large map pixels excluded 0.0667% of the data. ! The x-axis pixel size should ideally be below 0.1994 milli-arcsec float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000311392 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.0835789 0.0835789 0.167158 0.334316 0.668631 1.33726 2.67453 5.34905 10.6981 21.3962 42.7924 85.5848 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0009 print "peak=",int(1000*peak_flux)/1000 ! peak= 1.117 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8854 x 2.203 at -0.8079 degrees (North through East) ! Clean map min=-0.0020999 max=1.1177 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J0836-2016_X_2017_05_27_pus_uvs.log closed on Fri May 3 10:32:39 2019