! Started logfile: J0836-2016_S_2017_05_31_pus_uvs.log on Tue Feb  5 21:43:10 2019
obs J0836-2016_S_2017_05_31_pus_uva.fits
! Reading UV FITS file: J0836-2016_S_2017_05_31_pus_uva.fits
! AN table 1: 32 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.265278 visibilities/baseline/integration-bin.
! *** This seems a bit low - see "help observe" on the binwid argument.
! Found source: J0836-2016
! 
! There are 4 IFs, and a total of 4 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1  2.23588e+09      3.2e+07          1      3.2e+07
!  02        2  2.26788e+09      3.2e+07          1      3.2e+07
!  03        3  2.29988e+09      3.2e+07          1      3.2e+07
!  04        4  2.36388e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 703 lines of history.
! 
! Reading 1528 visibilities.
select I
! Polarization I is unavailable.
! Selecting polarization: RR,  channels: 1..4
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
print "field_size =",field_size
! field_size = 1024 
print "field_cell =",field_cell
! field_cell = 0.5 
print "taper_size =",taper_size
! taper_size = 20 
![@muppet J0836-2016_S_2017_05_31_pus]
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 170 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 180 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 180 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 275 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.153860Jy  sigma=0.005905
! Fit after  self-cal, rms=1.122471Jy  sigma=0.005659
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.747 mas, bmaj=8.832 mas, bpa=-11.29 degrees
! Estimated noise=4001.63 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 1.10177 Jy
! Component: 100  -  total flux cleaned = 1.5545 Jy
! Total flux subtracted in 100 components = 1.5545 Jy
! Clean residual min=-0.103650 max=0.224147 Jy/beam
! Clean residual mean=0.001743 rms=0.040996 Jy/beam
! Combined flux in latest and established models = 1.5545 Jy
! Performing phase self-cal
! Adding 15 model components to the UV plane model.
! The established model now contains 15 components and 1.5545 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.824233Jy  sigma=0.003287
! Fit after  self-cal, rms=0.824022Jy  sigma=0.003285
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=4.127 mas, bmaj=9.485 mas, bpa=-12.35 degrees
! Estimated noise=3242.7 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.335101 Jy
! Component: 100  -  total flux cleaned = 0.503308 Jy
! Component: 150  -  total flux cleaned = 0.598158 Jy
! Component: 200  -  total flux cleaned = 0.654479 Jy
! Total flux subtracted in 200 components = 0.654479 Jy
! Clean residual min=-0.049557 max=0.058811 Jy/beam
! Clean residual mean=-0.000032 rms=0.014694 Jy/beam
! Combined flux in latest and established models = 2.20897 Jy
! Performing phase self-cal
! Adding 82 model components to the UV plane model.
! The established model now contains 92 components and 2.20897 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.620236Jy  sigma=0.001640
! Fit after  self-cal, rms=0.620010Jy  sigma=0.001637
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  A total of 66 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        0.95     HN        0.99     KP        1.02     
!   LA        0.99     MK        1.00*    NL        0.99     OV        1.01     
!   PT        1.03     SC        0.98     
! 
! 
! Correcting IF 2.
!  A total of 66 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00*    FD        0.99     HN        1.03     KP        0.98     
!   LA        0.98     MK        1.00*    NL        1.12     OV        1.04     
!   PT        1.02     SC        1.02     
! 
! 
! Correcting IF 3.
!  A total of 66 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00*    FD        1.02     HN        1.00     KP        0.98     
!   LA        0.98     MK        1.00*    NL        1.05     OV        0.96     
!   PT        1.00     SC        0.98     
! 
! 
! Correcting IF 4.
!  A total of 6 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00*    FD        1.03     HN        0.91     KP        0.37     
!   LA        0.98     MK        1.00*    NL        1.00*    OV        1.00*    
!   PT        1.04     SC        1.00*    
! 
! 
! Fit before self-cal, rms=0.620010Jy  sigma=0.001637
! Fit after  self-cal, rms=0.100926Jy  sigma=0.000690
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=4.3 mas, bmaj=12.5 mas, bpa=-1.243 degrees
! Estimated noise=3425.5 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (42, -95.5).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0209657 Jy
! Component: 100  -  total flux cleaned = 0.0236342 Jy
! Component: 150  -  total flux cleaned = 0.0260237 Jy
! Component: 200  -  total flux cleaned = 0.027415 Jy
! Total flux subtracted in 200 components = 0.027415 Jy
! Clean residual min=-0.010979 max=0.009750 Jy/beam
! Clean residual mean=0.000025 rms=0.002801 Jy/beam
! Combined flux in latest and established models = 2.23639 Jy
! Performing phase self-cal
! Adding 36 model components to the UV plane model.
! The established model now contains 125 components and 2.23639 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.096816Jy  sigma=0.000661
! Fit after  self-cal, rms=0.096561Jy  sigma=0.000659
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.096561Jy  sigma=0.000659
! Fit after  self-cal, rms=0.096308Jy  sigma=0.000658
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=4.3 mas, bmaj=12.5 mas, bpa=-1.301 degrees
! Estimated noise=3422.43 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00308161 Jy
! Component: 100  -  total flux cleaned = 0.00407145 Jy
! Component: 150  -  total flux cleaned = 0.00418044 Jy
! Component: 200  -  total flux cleaned = 0.00418921 Jy
! Total flux subtracted in 200 components = 0.00418921 Jy
! Clean residual min=-0.010727 max=0.008828 Jy/beam
! Clean residual mean=0.000014 rms=0.002630 Jy/beam
! Combined flux in latest and established models = 2.24058 Jy
selfcal
! Performing phase self-cal
! Adding 32 model components to the UV plane model.
! The established model now contains 150 components and 2.24058 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.095957Jy  sigma=0.000656
! Fit after  self-cal, rms=0.095947Jy  sigma=0.000656
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000672612 Jy
! Component: 100  -  total flux cleaned = 0.000854467 Jy
! Component: 150  -  total flux cleaned = 0.00109716 Jy
! Component: 200  -  total flux cleaned = 0.00109644 Jy
! Total flux subtracted in 200 components = 0.00109644 Jy
! Clean residual min=-0.010428 max=0.008872 Jy/beam
! Clean residual mean=0.000010 rms=0.002576 Jy/beam
! Combined flux in latest and established models = 2.24168 Jy
! Performing phase self-cal
! Adding 34 model components to the UV plane model.
! The established model now contains 176 components and 2.24168 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.095787Jy  sigma=0.000655
! Fit after  self-cal, rms=0.095784Jy  sigma=0.000655
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.095784Jy  sigma=0.000655
! Fit after  self-cal, rms=0.095727Jy  sigma=0.000655
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=4.301 mas, bmaj=12.5 mas, bpa=-1.332 degrees
! Estimated noise=3421.45 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00109273 Jy
! Component: 100  -  total flux cleaned = 0.00109371 Jy
! Component: 150  -  total flux cleaned = 0.00101925 Jy
! Component: 200  -  total flux cleaned = 0.000950748 Jy
! Total flux subtracted in 200 components = 0.000950748 Jy
! Clean residual min=-0.010065 max=0.008724 Jy/beam
! Clean residual mean=0.000011 rms=0.002525 Jy/beam
! Combined flux in latest and established models = 2.24263 Jy
selfcal
! Performing phase self-cal
! Adding 27 model components to the UV plane model.
! The established model now contains 186 components and 2.24263 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.095604Jy  sigma=0.000654
! Fit after  self-cal, rms=0.095605Jy  sigma=0.000654
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 8.20741e-06 Jy
! Component: 100  -  total flux cleaned = -0.000197709 Jy
! Component: 150  -  total flux cleaned = -0.000198774 Jy
! Component: 200  -  total flux cleaned = -0.000200577 Jy
! Total flux subtracted in 200 components = -0.000200577 Jy
! Clean residual min=-0.009752 max=0.008644 Jy/beam
! Clean residual mean=0.000010 rms=0.002490 Jy/beam
! Combined flux in latest and established models = 2.24243 Jy
! Performing phase self-cal
! Adding 27 model components to the UV plane model.
! The established model now contains 195 components and 2.24243 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.095516Jy  sigma=0.000653
! Fit after  self-cal, rms=0.095517Jy  sigma=0.000653
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.095517Jy  sigma=0.000653
! Fit after  self-cal, rms=0.095491Jy  sigma=0.000653
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=7.785 mas, bmaj=17.2 mas, bpa=-10.41 degrees
! Estimated noise=4132.68 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000772476 Jy
! Component: 100  -  total flux cleaned = 0.000847224 Jy
! Component: 150  -  total flux cleaned = 0.000788882 Jy
! Component: 200  -  total flux cleaned = 0.000736277 Jy
! Total flux subtracted in 200 components = 0.000736277 Jy
! Clean residual min=-0.010151 max=0.008392 Jy/beam
! Clean residual mean=0.000016 rms=0.002789 Jy/beam
! Combined flux in latest and established models = 2.24316 Jy
selfcal
! Performing phase self-cal
! Adding 20 model components to the UV plane model.
! The established model now contains 211 components and 2.24316 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.095419Jy  sigma=0.000653
! Fit after  self-cal, rms=0.095409Jy  sigma=0.000653
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -2.2237e-05 Jy
! Component: 100  -  total flux cleaned = -1.65699e-05 Jy
! Component: 150  -  total flux cleaned = -1.91387e-05 Jy
! Component: 200  -  total flux cleaned = 6.56256e-05 Jy
! Total flux subtracted in 200 components = 6.56256e-05 Jy
! Clean residual min=-0.010029 max=0.008391 Jy/beam
! Clean residual mean=0.000018 rms=0.002745 Jy/beam
! Combined flux in latest and established models = 2.24323 Jy
! Performing phase self-cal
! Adding 23 model components to the UV plane model.
! The established model now contains 222 components and 2.24323 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.095369Jy  sigma=0.000653
! Fit after  self-cal, rms=0.095365Jy  sigma=0.000652
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=4.301 mas, bmaj=12.5 mas, bpa=-1.349 degrees
! Estimated noise=3421.13 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 4.301 x 12.5 at -1.349 degrees (North through East)
! Clean map  min=-0.0091615  max=1.568 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
! Performing amp+phase self-cal
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.095365Jy  sigma=0.000652
! Fit after  self-cal, rms=0.086984Jy  sigma=0.000593
! Inverting map and beam 
! Estimated beam: bmin=4.299 mas, bmaj=12.5 mas, bpa=-1.328 degrees
! Estimated noise=3420.19 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000918727 Jy
! Component: 100  -  total flux cleaned = 0.000794172 Jy
! Component: 150  -  total flux cleaned = 0.000737938 Jy
! Component: 200  -  total flux cleaned = 0.000579957 Jy
! Total flux subtracted in 200 components = 0.000579957 Jy
! Clean residual min=-0.009028 max=0.009106 Jy/beam
! Clean residual mean=0.000013 rms=0.002396 Jy/beam
! Combined flux in latest and established models = 2.24381 Jy
! Performing phase self-cal
! Adding 23 model components to the UV plane model.
! The established model now contains 238 components and 2.24381 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.086907Jy  sigma=0.000592
! Fit after  self-cal, rms=0.086909Jy  sigma=0.000592
! Inverting map 
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -9.96793e-05 Jy
! Component: 100  -  total flux cleaned = -0.00025429 Jy
! Component: 150  -  total flux cleaned = -0.000302541 Jy
! Component: 200  -  total flux cleaned = -0.000303253 Jy
! Total flux subtracted in 200 components = -0.000303253 Jy
! Clean residual min=-0.009080 max=0.009055 Jy/beam
! Clean residual mean=0.000014 rms=0.002377 Jy/beam
! Combined flux in latest and established models = 2.24351 Jy
! Performing phase self-cal
! Adding 29 model components to the UV plane model.
! The established model now contains 250 components and 2.24351 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.086855Jy  sigma=0.000592
! Fit after  self-cal, rms=0.086857Jy  sigma=0.000592
! Inverting map 
! Performing amp+phase self-cal
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.086857Jy  sigma=0.000592
! Fit after  self-cal, rms=0.086854Jy  sigma=0.000592
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.826 mas, bmaj=11.18 mas, bpa=-2.334 degrees
! Estimated noise=4291.8 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 1.13456 Jy
! Component: 100  -  total flux cleaned = 1.57289 Jy
! Component: 150  -  total flux cleaned = 1.8103 Jy
! Component: 200  -  total flux cleaned = 1.94827 Jy
! Total flux subtracted in 200 components = 1.94827 Jy
! Clean residual min=-0.040988 max=0.072431 Jy/beam
! Clean residual mean=0.000857 rms=0.016157 Jy/beam
! Combined flux in latest and established models = 1.94827 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 36 model components to the UV plane model.
! The established model now contains 36 components and 1.94827 Jy
! Inverting map and beam 
! Estimated beam: bmin=4.3 mas, bmaj=12.5 mas, bpa=-1.335 degrees
! Estimated noise=3420.18 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.114792 Jy
! Component: 100  -  total flux cleaned = 0.176696 Jy
! Component: 150  -  total flux cleaned = 0.212443 Jy
! Component: 200  -  total flux cleaned = 0.236647 Jy
! Total flux subtracted in 200 components = 0.236647 Jy
! Clean residual min=-0.014438 max=0.017463 Jy/beam
! Clean residual mean=0.000213 rms=0.004819 Jy/beam
! Combined flux in latest and established models = 2.18491 Jy
! Adding 66 model components to the UV plane model.
! The established model now contains 94 components and 2.18491 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=7.783 mas, bmaj=17.2 mas, bpa=-10.4 degrees
! Estimated noise=4132.79 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0231076 Jy
! Component: 100  -  total flux cleaned = 0.0356772 Jy
! Component: 150  -  total flux cleaned = 0.043892 Jy
! Component: 200  -  total flux cleaned = 0.0494961 Jy
! Total flux subtracted in 200 components = 0.0494961 Jy
! Clean residual min=-0.011670 max=0.007016 Jy/beam
! Clean residual mean=0.000090 rms=0.002949 Jy/beam
! Combined flux in latest and established models = 2.23441 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00296964 Jy
! Component: 100  -  total flux cleaned = 0.0045343 Jy
! Component: 150  -  total flux cleaned = 0.00573143 Jy
! Component: 200  -  total flux cleaned = 0.00648254 Jy
! Total flux subtracted in 200 components = 0.00648254 Jy
! Clean residual min=-0.011060 max=0.007955 Jy/beam
! Clean residual mean=0.000058 rms=0.002773 Jy/beam
! Combined flux in latest and established models = 2.24089 Jy
! Adding 53 model components to the UV plane model.
! The established model now contains 136 components and 2.24089 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=4.3 mas, bmaj=12.5 mas, bpa=-1.335 degrees
! Estimated noise=3420.18 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000346878 Jy
! Component: 100  -  total flux cleaned = 0.000337449 Jy
! Component: 150  -  total flux cleaned = 0.000332021 Jy
! Component: 200  -  total flux cleaned = 0.000453935 Jy
! Total flux subtracted in 200 components = 0.000453935 Jy
! Clean residual min=-0.010791 max=0.008719 Jy/beam
! Clean residual mean=0.000024 rms=0.002574 Jy/beam
! Combined flux in latest and established models = 2.24135 Jy
selfcal
! Performing phase self-cal
! Adding 23 model components to the UV plane model.
! The established model now contains 155 components and 2.24135 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.087299Jy  sigma=0.000596
! Fit after  self-cal, rms=0.087218Jy  sigma=0.000595
wmodel J0836-2016_S_2017_05_31_pus_map.mod
! Writing 155 model components to file: J0836-2016_S_2017_05_31_pus_map.mod
wobs J0836-2016_S_2017_05_31_pus_uvs.fits
! Writing UV FITS file: J0836-2016_S_2017_05_31_pus_uvs.fits
wwins J0836-2016_S_2017_05_31_pus_map.win
! wwins: Wrote 2 windows to J0836-2016_S_2017_05_31_pus_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = -0.00137904 Jy
! Component: 100  -  total flux cleaned = -0.000642139 Jy
! Component: 150  -  total flux cleaned = -0.00117717 Jy
! Component: 200  -  total flux cleaned = -0.00179095 Jy
! Component: 250  -  total flux cleaned = -0.00247285 Jy
! Component: 300  -  total flux cleaned = -0.00301171 Jy
! Component: 350  -  total flux cleaned = -0.00372877 Jy
! Component: 400  -  total flux cleaned = -0.00441111 Jy
! Component: 450  -  total flux cleaned = -0.00506246 Jy
! Component: 500  -  total flux cleaned = -0.00559356 Jy
! Component: 550  -  total flux cleaned = -0.00610405 Jy
! Component: 600  -  total flux cleaned = -0.00651297 Jy
! Component: 650  -  total flux cleaned = -0.0069083 Jy
! Component: 700  -  total flux cleaned = -0.00744035 Jy
! Component: 750  -  total flux cleaned = -0.00780712 Jy
! Component: 800  -  total flux cleaned = -0.00809057 Jy
! Component: 850  -  total flux cleaned = -0.00836518 Jy
! Component: 900  -  total flux cleaned = -0.00863004 Jy
! Component: 950  -  total flux cleaned = -0.00888705 Jy
! Component: 1000  -  total flux cleaned = -0.00919781 Jy
! Component: 1050  -  total flux cleaned = -0.00925846 Jy
! Component: 1100  -  total flux cleaned = -0.00955521 Jy
! Component: 1150  -  total flux cleaned = -0.00949774 Jy
! Component: 1200  -  total flux cleaned = -0.00955308 Jy
! Component: 1250  -  total flux cleaned = -0.00955229 Jy
! Component: 1300  -  total flux cleaned = -0.00944527 Jy
! Component: 1350  -  total flux cleaned = -0.00944497 Jy
! Component: 1400  -  total flux cleaned = -0.00934311 Jy
! Component: 1450  -  total flux cleaned = -0.00934352 Jy
! Component: 1500  -  total flux cleaned = -0.00934267 Jy
! Component: 1550  -  total flux cleaned = -0.00929449 Jy
! Component: 1600  -  total flux cleaned = -0.00915501 Jy
! Component: 1650  -  total flux cleaned = -0.00915591 Jy
! Component: 1700  -  total flux cleaned = -0.0092456 Jy
! Component: 1750  -  total flux cleaned = -0.00928889 Jy
! Component: 1800  -  total flux cleaned = -0.00933149 Jy
! Component: 1850  -  total flux cleaned = -0.00933149 Jy
! Component: 1900  -  total flux cleaned = -0.00949755 Jy
! Component: 1950  -  total flux cleaned = -0.00974103 Jy
! Component: 2000  -  total flux cleaned = -0.00982006 Jy
! Component: 2050  -  total flux cleaned = -0.010057 Jy
! Component: 2100  -  total flux cleaned = -0.0102124 Jy
! Component: 2150  -  total flux cleaned = -0.0103659 Jy
! Component: 2200  -  total flux cleaned = -0.0105177 Jy
! Component: 2250  -  total flux cleaned = -0.0107414 Jy
! Component: 2300  -  total flux cleaned = -0.0108889 Jy
! Component: 2350  -  total flux cleaned = -0.0111078 Jy
! Component: 2400  -  total flux cleaned = -0.0112867 Jy
! Component: 2450  -  total flux cleaned = -0.0113575 Jy
! Component: 2500  -  total flux cleaned = -0.0115321 Jy
! Component: 2550  -  total flux cleaned = -0.0116356 Jy
! Component: 2600  -  total flux cleaned = -0.0117039 Jy
! Component: 2650  -  total flux cleaned = -0.0117379 Jy
! Component: 2700  -  total flux cleaned = -0.0118052 Jy
! Component: 2750  -  total flux cleaned = -0.0119047 Jy
! Component: 2800  -  total flux cleaned = -0.0118714 Jy
! Component: 2850  -  total flux cleaned = -0.0118387 Jy
! Component: 2900  -  total flux cleaned = -0.0118387 Jy
! Component: 2950  -  total flux cleaned = -0.0118063 Jy
! Component: 3000  -  total flux cleaned = -0.0119029 Jy
! Component: 3050  -  total flux cleaned = -0.0119347 Jy
! Component: 3100  -  total flux cleaned = -0.0119349 Jy
! Component: 3150  -  total flux cleaned = -0.0119666 Jy
! Component: 3200  -  total flux cleaned = -0.01203 Jy
! Component: 3250  -  total flux cleaned = -0.0121561 Jy
! Component: 3300  -  total flux cleaned = -0.0122191 Jy
! Component: 3350  -  total flux cleaned = -0.0122818 Jy
! Component: 3400  -  total flux cleaned = -0.0123759 Jy
! Component: 3450  -  total flux cleaned = -0.0124382 Jy
! Component: 3500  -  total flux cleaned = -0.0125006 Jy
! Component: 3550  -  total flux cleaned = -0.012594 Jy
! Component: 3600  -  total flux cleaned = -0.0126869 Jy
! Component: 3650  -  total flux cleaned = -0.0127797 Jy
! Component: 3700  -  total flux cleaned = -0.0128105 Jy
! Component: 3750  -  total flux cleaned = -0.0128721 Jy
! Component: 3800  -  total flux cleaned = -0.0129956 Jy
! Component: 3850  -  total flux cleaned = -0.0130574 Jy
! Component: 3900  -  total flux cleaned = -0.01315 Jy
! Component: 3950  -  total flux cleaned = -0.0132425 Jy
! Component: 4000  -  total flux cleaned = -0.0133043 Jy
! Component: 4050  -  total flux cleaned = -0.0133968 Jy
! Total flux subtracted in 4096 components = -0.0134585 Jy
! Clean residual min=-0.001824 max=0.001998 Jy/beam
! Clean residual mean=0.000008 rms=0.000560 Jy/beam
! Combined flux in latest and established models = 2.22789 Jy
keep
! Adding 295 model components to the UV plane model.
! The established model now contains 450 components and 2.22789 Jy
![Exited script file: muppet]
wmap "J0836-2016_S_2017_05_31_pus\_map.fits"
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 4.3 x 12.5 at -1.335 degrees (North through East)
! Clean map  min=-0.0063269  max=1.5654 Jy/beam
! Writing clean map to FITS file: J0836-2016_S_2017_05_31_pus_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is",peak_flux
! The peak flux is 1.56543 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000542337 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.103934 0.103934 0.207868 0.415736 0.831472 1.66294 3.32589 6.65178 13.3036 26.6071 53.2142
print "clev=",int(3*image_rms*10000)/10000
! clev= 0.0016 
print "peak=",int(1000*peak_flux)/1000
! peak= 1.565 
mapcolor none
! Mapplot colormap: none, contrast: 1 brightness: 0.5.
mapplot cln
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 4.3 x 12.5 at -1.335 degrees (North through East)
! Clean map  min=-0.0063269  max=1.5654 Jy/beam
! Error occured in command: mapplot
! 
! <Aborted by EOF>
! <Aborted by EOF>
! <Aborted by EOF>
! <Aborted by EOF>
! 4 consecutive EOF's on stdin - 10 will exit program
! <Aborted by EOF>
! 5 consecutive EOF's on stdin - 10 will exit program
! <Aborted by EOF>
! 6 consecutive EOF's on stdin - 10 will exit program
! <Aborted by EOF>
! 7 consecutive EOF's on stdin - 10 will exit program
! <Aborted by EOF>
! 8 consecutive EOF's on stdin - 10 will exit program
! <Aborted by EOF>
! 9 consecutive EOF's on stdin - 10 will exit program
! <Aborted by EOF>
! 10 consecutive EOF's on stdin - 10 will exit program
! Log file J0836-2016_S_2017_05_31_pus_uvs.log closed on Tue Feb  5 21:43:15 2019