! Started logfile: J0834-2241_S_2017_05_01_pus_uvs.log on Wed May 1 18:31:43 2019 obs J0834-2241_S_2017_05_01_pus_uva.fits ! Reading UV FITS file: J0834-2241_S_2017_05_01_pus_uva.fits ! AN table 1: 116 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.586207 visibilities/baseline/integration-bin. ! Found source: J0834-2241 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 788 lines of history. ! ! Reading 12240 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J0834-2241_S_2017_05_01_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 320 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 264 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 292 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 700 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.968764Jy sigma=0.006434 ! Fit after self-cal, rms=0.934650Jy sigma=0.006226 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=4.008 mas, bmaj=14.37 mas, bpa=5.399 degrees ! Estimated noise=1875 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0509375 Jy ! Component: 100 - total flux cleaned = 0.0642006 Jy ! Total flux subtracted in 100 components = 0.0642006 Jy ! Clean residual min=-0.004740 max=0.005726 Jy/beam ! Clean residual mean=-0.000022 rms=0.001340 Jy/beam ! Combined flux in latest and established models = 0.0642006 Jy ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 15 components and 0.0642006 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.101221Jy sigma=0.000642 ! Fit after self-cal, rms=0.100825Jy sigma=0.000640 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=5.407 mas, bmaj=17.55 mas, bpa=4.626 degrees ! Estimated noise=1104.33 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00971084 Jy ! Component: 100 - total flux cleaned = 0.0136421 Jy ! Component: 150 - total flux cleaned = 0.0154098 Jy ! Component: 200 - total flux cleaned = 0.0160431 Jy ! Total flux subtracted in 200 components = 0.0160431 Jy ! Clean residual min=-0.003228 max=0.004426 Jy/beam ! Clean residual mean=-0.000012 rms=0.000967 Jy/beam ! Combined flux in latest and established models = 0.0802437 Jy ! Performing phase self-cal ! Adding 56 model components to the UV plane model. ! The established model now contains 70 components and 0.0802437 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.100017Jy sigma=0.000634 ! Fit after self-cal, rms=0.099982Jy sigma=0.000634 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.98 FD 0.92 HN 1.05 KP 1.05 ! LA 0.98 MK 1.00* NL 1.06 OV 1.10 ! PT 1.02 SC 0.97 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 0.95 FD 0.91 HN 1.06 KP 1.07 ! LA 0.94 MK 1.00* NL 1.06 OV 1.10 ! PT 0.99 SC 1.07 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.06 FD 1.05 HN 0.88 KP 0.98 ! LA 0.97 MK 1.00* NL 1.06 OV 1.07 ! PT 0.94 SC 0.97 ! ! ! Correcting IF 4. ! A total of 87 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.92 FD 0.97 HN 0.58 KP 1.00* ! LA 0.76 MK 1.00* NL 1.00* OV 1.00* ! PT 1.05 SC 1.00* ! ! ! Fit before self-cal, rms=0.099982Jy sigma=0.000634 ! Fit after self-cal, rms=0.099435Jy sigma=0.000632 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=5.369 mas, bmaj=17.42 mas, bpa=4.391 degrees ! Estimated noise=1105.59 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-16.5, 6). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00307811 Jy ! Component: 100 - total flux cleaned = 0.00360865 Jy ! Component: 150 - total flux cleaned = 0.00376784 Jy ! Component: 200 - total flux cleaned = 0.00381293 Jy ! Total flux subtracted in 200 components = 0.00381293 Jy ! Clean residual min=-0.002462 max=0.002302 Jy/beam ! Clean residual mean=0.000013 rms=0.000616 Jy/beam ! Combined flux in latest and established models = 0.0840566 Jy ! Performing phase self-cal ! Adding 29 model components to the UV plane model. ! The established model now contains 97 components and 0.0840566 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.099323Jy sigma=0.000631 ! Fit after self-cal, rms=0.099346Jy sigma=0.000631 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.099346Jy sigma=0.000631 ! Fit after self-cal, rms=0.100424Jy sigma=0.000630 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=5.352 mas, bmaj=17.45 mas, bpa=4.499 degrees ! Estimated noise=1108.69 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00156029 Jy ! Component: 100 - total flux cleaned = 0.00171452 Jy ! Component: 150 - total flux cleaned = 0.00188241 Jy ! Component: 200 - total flux cleaned = 0.0019887 Jy ! Total flux subtracted in 200 components = 0.0019887 Jy ! Clean residual min=-0.002160 max=0.002290 Jy/beam ! Clean residual mean=0.000012 rms=0.000538 Jy/beam ! Combined flux in latest and established models = 0.0860453 Jy selfcal ! Performing phase self-cal ! Adding 29 model components to the UV plane model. ! The established model now contains 117 components and 0.0860453 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.100366Jy sigma=0.000630 ! Fit after self-cal, rms=0.100387Jy sigma=0.000629 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000643553 Jy ! Component: 100 - total flux cleaned = 0.000601018 Jy ! Component: 150 - total flux cleaned = 0.000601131 Jy ! Component: 200 - total flux cleaned = 0.000566914 Jy ! Total flux subtracted in 200 components = 0.000566914 Jy ! Clean residual min=-0.002075 max=0.002145 Jy/beam ! Clean residual mean=0.000012 rms=0.000538 Jy/beam ! Combined flux in latest and established models = 0.0866123 Jy ! Performing phase self-cal ! Adding 33 model components to the UV plane model. ! The established model now contains 129 components and 0.0866122 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.100344Jy sigma=0.000629 ! Fit after self-cal, rms=0.100301Jy sigma=0.000629 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.100301Jy sigma=0.000629 ! Fit after self-cal, rms=0.100975Jy sigma=0.000629 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=5.333 mas, bmaj=17.48 mas, bpa=4.517 degrees ! Estimated noise=1109.87 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000745203 Jy ! Component: 100 - total flux cleaned = 0.000870766 Jy ! Component: 150 - total flux cleaned = 0.000909213 Jy ! Component: 200 - total flux cleaned = 0.000908878 Jy ! Total flux subtracted in 200 components = 0.000908878 Jy ! Clean residual min=-0.002000 max=0.001958 Jy/beam ! Clean residual mean=0.000010 rms=0.000506 Jy/beam ! Combined flux in latest and established models = 0.0875211 Jy selfcal ! Performing phase self-cal ! Adding 29 model components to the UV plane model. ! The established model now contains 139 components and 0.0875211 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.100940Jy sigma=0.000628 ! Fit after self-cal, rms=0.100943Jy sigma=0.000628 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000266251 Jy ! Component: 100 - total flux cleaned = 0.000304041 Jy ! Component: 150 - total flux cleaned = 0.000305309 Jy ! Component: 200 - total flux cleaned = 0.000306034 Jy ! Total flux subtracted in 200 components = 0.000306034 Jy ! Clean residual min=-0.001968 max=0.001995 Jy/beam ! Clean residual mean=0.000010 rms=0.000511 Jy/beam ! Combined flux in latest and established models = 0.0878271 Jy ! Performing phase self-cal ! Adding 30 model components to the UV plane model. ! The established model now contains 147 components and 0.0878271 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.100912Jy sigma=0.000628 ! Fit after self-cal, rms=0.100892Jy sigma=0.000628 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.100892Jy sigma=0.000628 ! Fit after self-cal, rms=0.101015Jy sigma=0.000628 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=9.079 mas, bmaj=21.55 mas, bpa=1.894 degrees ! Estimated noise=1207.26 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000281376 Jy ! Component: 100 - total flux cleaned = 0.000418974 Jy ! Component: 150 - total flux cleaned = 0.00053189 Jy ! Component: 200 - total flux cleaned = 0.000531945 Jy ! Total flux subtracted in 200 components = 0.000531945 Jy ! Clean residual min=-0.001877 max=0.002015 Jy/beam ! Clean residual mean=0.000011 rms=0.000521 Jy/beam ! Combined flux in latest and established models = 0.0883591 Jy selfcal ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 168 components and 0.0883591 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.100996Jy sigma=0.000628 ! Fit after self-cal, rms=0.101002Jy sigma=0.000628 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 1.71218e-05 Jy ! Component: 100 - total flux cleaned = 1.8538e-05 Jy ! Component: 150 - total flux cleaned = -1.73765e-05 Jy ! Component: 200 - total flux cleaned = -5.08457e-05 Jy ! Total flux subtracted in 200 components = -5.08457e-05 Jy ! Clean residual min=-0.001868 max=0.002023 Jy/beam ! Clean residual mean=0.000010 rms=0.000517 Jy/beam ! Combined flux in latest and established models = 0.0883083 Jy ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 171 components and 0.0883083 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.100989Jy sigma=0.000628 ! Fit after self-cal, rms=0.100986Jy sigma=0.000628 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=5.316 mas, bmaj=17.48 mas, bpa=4.497 degrees ! Estimated noise=1110.37 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 5.316 x 17.48 at 4.497 degrees (North through East) ! Clean map min=-0.004351 max=0.06932 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.946 mas, bmaj=14.31 mas, bpa=4.873 degrees ! Estimated noise=1841.43 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0499306 Jy ! Component: 100 - total flux cleaned = 0.0663554 Jy ! Component: 150 - total flux cleaned = 0.0763388 Jy ! Component: 200 - total flux cleaned = 0.0803718 Jy ! Total flux subtracted in 200 components = 0.0803718 Jy ! Clean residual min=-0.003817 max=0.004552 Jy/beam ! Clean residual mean=0.000002 rms=0.001131 Jy/beam ! Combined flux in latest and established models = 0.0803718 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 27 model components to the UV plane model. ! The established model now contains 27 components and 0.0803718 Jy ! Inverting map and beam ! Estimated beam: bmin=5.316 mas, bmaj=17.48 mas, bpa=4.497 degrees ! Estimated noise=1110.37 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00435122 Jy ! Component: 100 - total flux cleaned = 0.00515658 Jy ! Component: 150 - total flux cleaned = 0.00567465 Jy ! Component: 200 - total flux cleaned = 0.00611022 Jy ! Total flux subtracted in 200 components = 0.00611022 Jy ! Clean residual min=-0.001974 max=0.002500 Jy/beam ! Clean residual mean=0.000008 rms=0.000614 Jy/beam ! Combined flux in latest and established models = 0.086482 Jy ! Adding 41 model components to the UV plane model. ! The established model now contains 66 components and 0.086482 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=9.079 mas, bmaj=21.55 mas, bpa=1.894 degrees ! Estimated noise=1207.26 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000840008 Jy ! Component: 100 - total flux cleaned = 0.00118004 Jy ! Component: 150 - total flux cleaned = 0.00141372 Jy ! Component: 200 - total flux cleaned = 0.00165223 Jy ! Total flux subtracted in 200 components = 0.00165223 Jy ! Clean residual min=-0.001826 max=0.001896 Jy/beam ! Clean residual mean=0.000010 rms=0.000529 Jy/beam ! Combined flux in latest and established models = 0.0881343 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000202596 Jy ! Component: 100 - total flux cleaned = 0.000261287 Jy ! Component: 150 - total flux cleaned = 0.000315142 Jy ! Component: 200 - total flux cleaned = 0.000315244 Jy ! Total flux subtracted in 200 components = 0.000315244 Jy ! Clean residual min=-0.001851 max=0.001977 Jy/beam ! Clean residual mean=0.000010 rms=0.000511 Jy/beam ! Combined flux in latest and established models = 0.0884495 Jy ! Adding 70 model components to the UV plane model. ! The established model now contains 134 components and 0.0884495 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=5.316 mas, bmaj=17.48 mas, bpa=4.497 degrees ! Estimated noise=1110.37 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000143634 Jy ! Component: 100 - total flux cleaned = -0.000221307 Jy ! Component: 150 - total flux cleaned = -0.000185756 Jy ! Component: 200 - total flux cleaned = -0.000219698 Jy ! Total flux subtracted in 200 components = -0.000219698 Jy ! Clean residual min=-0.001853 max=0.001950 Jy/beam ! Clean residual mean=0.000008 rms=0.000514 Jy/beam ! Combined flux in latest and established models = 0.0882298 Jy selfcal ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 150 components and 0.0882298 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.100983Jy sigma=0.000628 ! Fit after self-cal, rms=0.100976Jy sigma=0.000628 wmodel J0834-2241_S_2017_05_01_pus_map.mod ! Writing 150 model components to file: J0834-2241_S_2017_05_01_pus_map.mod wobs J0834-2241_S_2017_05_01_pus_uvs.fits ! Writing UV FITS file: J0834-2241_S_2017_05_01_pus_uvs.fits wwins J0834-2241_S_2017_05_01_pus_map.win ! wwins: Wrote 2 windows to J0834-2241_S_2017_05_01_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.00081113 Jy ! Component: 100 - total flux cleaned = 0.00110586 Jy ! Component: 150 - total flux cleaned = 0.00119608 Jy ! Component: 200 - total flux cleaned = 0.00142611 Jy ! Component: 250 - total flux cleaned = 0.00159268 Jy ! Component: 300 - total flux cleaned = 0.00180723 Jy ! Component: 350 - total flux cleaned = 0.00209378 Jy ! Component: 400 - total flux cleaned = 0.00232016 Jy ! Component: 450 - total flux cleaned = 0.00251611 Jy ! Component: 500 - total flux cleaned = 0.00268246 Jy ! Component: 550 - total flux cleaned = 0.00279788 Jy ! Component: 600 - total flux cleaned = 0.00291037 Jy ! Component: 650 - total flux cleaned = 0.0030198 Jy ! Component: 700 - total flux cleaned = 0.00312632 Jy ! Component: 750 - total flux cleaned = 0.00323085 Jy ! Component: 800 - total flux cleaned = 0.00339426 Jy ! Component: 850 - total flux cleaned = 0.00347382 Jy ! Component: 900 - total flux cleaned = 0.00349341 Jy ! Component: 950 - total flux cleaned = 0.0035506 Jy ! Component: 1000 - total flux cleaned = 0.00358791 Jy ! Component: 1050 - total flux cleaned = 0.0036798 Jy ! Component: 1100 - total flux cleaned = 0.0037336 Jy ! Component: 1150 - total flux cleaned = 0.00382206 Jy ! Component: 1200 - total flux cleaned = 0.00383903 Jy ! Component: 1250 - total flux cleaned = 0.00399277 Jy ! Component: 1300 - total flux cleaned = 0.00392584 Jy ! Component: 1350 - total flux cleaned = 0.00402529 Jy ! Component: 1400 - total flux cleaned = 0.00409082 Jy ! Component: 1450 - total flux cleaned = 0.0041067 Jy ! Component: 1500 - total flux cleaned = 0.00409106 Jy ! Component: 1550 - total flux cleaned = 0.00413795 Jy ! Component: 1600 - total flux cleaned = 0.00416851 Jy ! Component: 1650 - total flux cleaned = 0.0041385 Jy ! Component: 1700 - total flux cleaned = 0.00421351 Jy ! Component: 1750 - total flux cleaned = 0.00421369 Jy ! Component: 1800 - total flux cleaned = 0.00425722 Jy ! Component: 1850 - total flux cleaned = 0.00430022 Jy ! Component: 1900 - total flux cleaned = 0.00431426 Jy ! Component: 1950 - total flux cleaned = 0.00438457 Jy ! Component: 2000 - total flux cleaned = 0.00448162 Jy ! Component: 2050 - total flux cleaned = 0.00450913 Jy ! Component: 2100 - total flux cleaned = 0.00459083 Jy ! Component: 2150 - total flux cleaned = 0.00465797 Jy ! Component: 2200 - total flux cleaned = 0.00471103 Jy ! Component: 2250 - total flux cleaned = 0.00476356 Jy ! Component: 2300 - total flux cleaned = 0.00484156 Jy ! Component: 2350 - total flux cleaned = 0.00493166 Jy ! Component: 2400 - total flux cleaned = 0.00500815 Jy ! Component: 2450 - total flux cleaned = 0.00508373 Jy ! Component: 2500 - total flux cleaned = 0.00514635 Jy ! Component: 2550 - total flux cleaned = 0.00522068 Jy ! Component: 2600 - total flux cleaned = 0.00530624 Jy ! Component: 2650 - total flux cleaned = 0.00535453 Jy ! Component: 2700 - total flux cleaned = 0.00541439 Jy ! Component: 2750 - total flux cleaned = 0.00545021 Jy ! Component: 2800 - total flux cleaned = 0.0055091 Jy ! Component: 2850 - total flux cleaned = 0.00559073 Jy ! Component: 2900 - total flux cleaned = 0.00562535 Jy ! Component: 2950 - total flux cleaned = 0.00564821 Jy ! Component: 3000 - total flux cleaned = 0.00564825 Jy ! Component: 3050 - total flux cleaned = 0.00565947 Jy ! Component: 3100 - total flux cleaned = 0.00570409 Jy ! Component: 3150 - total flux cleaned = 0.00569302 Jy ! Component: 3200 - total flux cleaned = 0.00573682 Jy ! Component: 3250 - total flux cleaned = 0.00573673 Jy ! Component: 3300 - total flux cleaned = 0.00572581 Jy ! Component: 3350 - total flux cleaned = 0.00579008 Jy ! Component: 3400 - total flux cleaned = 0.00584326 Jy ! Component: 3450 - total flux cleaned = 0.0058432 Jy ! Component: 3500 - total flux cleaned = 0.00585367 Jy ! Component: 3550 - total flux cleaned = 0.0058641 Jy ! Component: 3600 - total flux cleaned = 0.00591586 Jy ! Component: 3650 - total flux cleaned = 0.0059467 Jy ! Component: 3700 - total flux cleaned = 0.00595687 Jy ! Component: 3750 - total flux cleaned = 0.00596696 Jy ! Component: 3800 - total flux cleaned = 0.00596704 Jy ! Component: 3850 - total flux cleaned = 0.00600708 Jy ! Component: 3900 - total flux cleaned = 0.00602698 Jy ! Component: 3950 - total flux cleaned = 0.00601704 Jy ! Component: 4000 - total flux cleaned = 0.00601697 Jy ! Component: 4050 - total flux cleaned = 0.00597788 Jy ! Total flux subtracted in 4096 components = 0.00600697 Jy ! Clean residual min=-0.000519 max=0.000632 Jy/beam ! Clean residual mean=0.000002 rms=0.000194 Jy/beam ! Combined flux in latest and established models = 0.0942368 Jy keep ! Adding 289 model components to the UV plane model. ! The established model now contains 438 components and 0.0942367 Jy ![Exited script file: muppet] wmap "J0834-2241_S_2017_05_01_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 5.316 x 17.48 at 4.497 degrees (North through East) ! Clean map min=-0.0040774 max=0.068761 Jy/beam ! Writing clean map to FITS file: J0834-2241_S_2017_05_01_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.068761 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000192486 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.839805 0.839805 1.67961 3.35922 6.71844 13.4369 26.8737 53.7475 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0005 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.068 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 5.316 x 17.48 at 4.497 degrees (North through East) ! Clean map min=-0.0040774 max=0.068761 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J0834-2241_S_2017_05_01_pus_uvs.log closed on Wed May 1 18:31:48 2019