! Started logfile: J0833+0350_S_2017_04_28_pus_uvs.log on Thu May 2 16:21:21 2019 obs J0833+0350_S_2017_04_28_pus_uva.fits ! Reading UV FITS file: J0833+0350_S_2017_04_28_pus_uva.fits ! AN table 1: 111 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.966567 visibilities/baseline/integration-bin. ! Found source: J0833+0350 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 671 lines of history. ! ! Reading 19312 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J0833+0350_S_2017_04_28_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 21 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 21 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 21 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 469 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.707158Jy sigma=0.018167 ! Fit after self-cal, rms=0.698061Jy sigma=0.018140 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.963 mas, bmaj=7.511 mas, bpa=-7.105 degrees ! Estimated noise=740.438 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.194195 Jy ! Component: 100 - total flux cleaned = 0.233314 Jy ! Total flux subtracted in 100 components = 0.233314 Jy ! Clean residual min=-0.048783 max=0.048546 Jy/beam ! Clean residual mean=0.000256 rms=0.016162 Jy/beam ! Combined flux in latest and established models = 0.233314 Jy ! Performing phase self-cal ! Adding 5 model components to the UV plane model. ! The established model now contains 5 components and 0.233314 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.160333Jy sigma=0.004065 ! Fit after self-cal, rms=0.160315Jy sigma=0.004065 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.52 mas, bmaj=8.042 mas, bpa=-4.72 degrees ! Estimated noise=621.554 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0164093 Jy ! Component: 100 - total flux cleaned = 0.0127178 Jy ! Component: 150 - total flux cleaned = 0.00956731 Jy ! Component: 200 - total flux cleaned = 0.00687153 Jy ! Total flux subtracted in 200 components = 0.00687153 Jy ! Clean residual min=-0.042400 max=0.045123 Jy/beam ! Clean residual mean=0.000708 rms=0.013518 Jy/beam ! Combined flux in latest and established models = 0.240185 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 11 components and 0.240185 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.150932Jy sigma=0.004305 ! Fit after self-cal, rms=0.150913Jy sigma=0.004305 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.85 FD 0.85 HN 0.94 KP 0.85 ! LA 0.82 MK 0.96 NL 0.86 OV 0.86 ! PT 0.97 SC 1.03 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 0.91 FD 0.78 HN 0.99 KP 0.84 ! LA 0.79 MK 0.94 NL 1.01 OV 0.88 ! PT 0.97 SC 0.98 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.97 FD 0.81 HN 0.97 KP 0.91 ! LA 0.84 MK 1.03 NL 0.94 OV 0.89 ! PT 0.95 SC 0.96 ! ! ! Correcting IF 4. ! A total of 9 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 0.84 HN 0.94 KP 1.00* ! LA 27.36 MK 1.03 NL 1.00* OV 1.00* ! PT 1.05 SC 1.00* ! ! ! Fit before self-cal, rms=0.150913Jy sigma=0.004305 ! Fit after self-cal, rms=3.006532Jy sigma=0.000793 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.457 mas, bmaj=7.866 mas, bpa=-3.432 degrees ! Estimated noise=623.391 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0072418 Jy ! Component: 100 - total flux cleaned = 0.011169 Jy ! Component: 150 - total flux cleaned = 0.0132649 Jy ! Component: 200 - total flux cleaned = 0.013269 Jy ! Total flux subtracted in 200 components = 0.013269 Jy ! Clean residual min=-0.007021 max=0.005599 Jy/beam ! Clean residual mean=0.000001 rms=0.001529 Jy/beam ! Combined flux in latest and established models = 0.253454 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 23 components and 0.253454 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=3.005929Jy sigma=0.000789 ! Fit after self-cal, rms=3.006136Jy sigma=0.000785 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=3.006136Jy sigma=0.000785 ! Fit after self-cal, rms=3.480242Jy sigma=0.000725 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.437 mas, bmaj=7.844 mas, bpa=-3.552 degrees ! Estimated noise=627.487 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0035697 Jy ! Component: 100 - total flux cleaned = 0.00568572 Jy ! Component: 150 - total flux cleaned = 0.00677699 Jy ! Component: 200 - total flux cleaned = 0.0071404 Jy ! Total flux subtracted in 200 components = 0.0071404 Jy ! Clean residual min=-0.003031 max=0.003206 Jy/beam ! Clean residual mean=0.000017 rms=0.000787 Jy/beam ! Combined flux in latest and established models = 0.260595 Jy selfcal ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 30 components and 0.260595 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=3.479918Jy sigma=0.000724 ! Fit after self-cal, rms=3.479917Jy sigma=0.000724 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00010261 Jy ! Component: 100 - total flux cleaned = 0.000355308 Jy ! Component: 150 - total flux cleaned = 0.000541823 Jy ! Component: 200 - total flux cleaned = 0.000723328 Jy ! Total flux subtracted in 200 components = 0.000723328 Jy ! Clean residual min=-0.002964 max=0.003133 Jy/beam ! Clean residual mean=0.000017 rms=0.000785 Jy/beam ! Combined flux in latest and established models = 0.261318 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 38 components and 0.261318 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=3.479868Jy sigma=0.000724 ! Fit after self-cal, rms=3.479866Jy sigma=0.000724 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=3.479866Jy sigma=0.000724 ! Fit after self-cal, rms=0.091685Jy sigma=0.000697 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.431 mas, bmaj=7.834 mas, bpa=-3.585 degrees ! Estimated noise=627.793 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00110309 Jy ! Component: 100 - total flux cleaned = 0.00158276 Jy ! Component: 150 - total flux cleaned = 0.00176282 Jy ! Component: 200 - total flux cleaned = 0.00191868 Jy ! Total flux subtracted in 200 components = 0.00191868 Jy ! Clean residual min=-0.001689 max=0.002000 Jy/beam ! Clean residual mean=-0.000001 rms=0.000417 Jy/beam ! Combined flux in latest and established models = 0.263237 Jy selfcal ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 48 components and 0.263237 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.091669Jy sigma=0.000697 ! Fit after self-cal, rms=0.091606Jy sigma=0.000697 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (2, 15). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00185235 Jy ! Component: 100 - total flux cleaned = 0.00245692 Jy ! Component: 150 - total flux cleaned = 0.00236042 Jy ! Component: 200 - total flux cleaned = 0.00230119 Jy ! Total flux subtracted in 200 components = 0.00230119 Jy ! Clean residual min=-0.001503 max=0.001541 Jy/beam ! Clean residual mean=0.000000 rms=0.000395 Jy/beam ! Combined flux in latest and established models = 0.265538 Jy ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 67 components and 0.265538 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.091561Jy sigma=0.000696 ! Fit after self-cal, rms=0.091561Jy sigma=0.000696 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.091561Jy sigma=0.000696 ! Fit after self-cal, rms=0.091637Jy sigma=0.000696 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.526 mas, bmaj=11.56 mas, bpa=0.31 degrees ! Estimated noise=760.544 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000918167 Jy ! Component: 100 - total flux cleaned = 0.00130405 Jy ! Component: 150 - total flux cleaned = 0.0013737 Jy ! Component: 200 - total flux cleaned = 0.00143416 Jy ! Total flux subtracted in 200 components = 0.00143416 Jy ! Clean residual min=-0.001609 max=0.001725 Jy/beam ! Clean residual mean=-0.000001 rms=0.000442 Jy/beam ! Combined flux in latest and established models = 0.266972 Jy selfcal ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 88 components and 0.266972 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.091629Jy sigma=0.000696 ! Fit after self-cal, rms=0.091628Jy sigma=0.000696 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000156988 Jy ! Component: 100 - total flux cleaned = 0.000183081 Jy ! Component: 150 - total flux cleaned = 0.000183575 Jy ! Component: 200 - total flux cleaned = 0.000184132 Jy ! Total flux subtracted in 200 components = 0.000184132 Jy ! Clean residual min=-0.001615 max=0.001659 Jy/beam ! Clean residual mean=-0.000001 rms=0.000437 Jy/beam ! Combined flux in latest and established models = 0.267156 Jy ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 103 components and 0.267156 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.091627Jy sigma=0.000696 ! Fit after self-cal, rms=0.091627Jy sigma=0.000696 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.427 mas, bmaj=7.824 mas, bpa=-3.568 degrees ! Estimated noise=628.555 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.427 x 7.824 at -3.568 degrees (North through East) ! Clean map min=-0.0013806 max=0.26649 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.883 mas, bmaj=7.231 mas, bpa=-5.248 degrees ! Estimated noise=784.603 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.206087 Jy ! Component: 100 - total flux cleaned = 0.251068 Jy ! Component: 150 - total flux cleaned = 0.262014 Jy ! Component: 200 - total flux cleaned = 0.266653 Jy ! Total flux subtracted in 200 components = 0.266653 Jy ! Clean residual min=-0.002608 max=0.002770 Jy/beam ! Clean residual mean=-0.000000 rms=0.000614 Jy/beam ! Combined flux in latest and established models = 0.266653 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 13 model components to the UV plane model. ! The established model now contains 13 components and 0.266653 Jy ! Inverting map and beam ! Estimated beam: bmin=3.427 mas, bmaj=7.824 mas, bpa=-3.568 degrees ! Estimated noise=628.555 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000714739 Jy ! Component: 100 - total flux cleaned = 0.00113315 Jy ! Component: 150 - total flux cleaned = 0.00141427 Jy ! Component: 200 - total flux cleaned = 0.00153503 Jy ! Total flux subtracted in 200 components = 0.00153503 Jy ! Clean residual min=-0.001788 max=0.001668 Jy/beam ! Clean residual mean=-0.000001 rms=0.000420 Jy/beam ! Combined flux in latest and established models = 0.268188 Jy ! Adding 27 model components to the UV plane model. ! The established model now contains 33 components and 0.268188 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.526 mas, bmaj=11.56 mas, bpa=0.31 degrees ! Estimated noise=760.544 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000173639 Jy ! Component: 100 - total flux cleaned = 0.000151256 Jy ! Component: 150 - total flux cleaned = 9.53177e-05 Jy ! Component: 200 - total flux cleaned = 7.01998e-05 Jy ! Total flux subtracted in 200 components = 7.01998e-05 Jy ! Clean residual min=-0.001669 max=0.001727 Jy/beam ! Clean residual mean=-0.000001 rms=0.000458 Jy/beam ! Combined flux in latest and established models = 0.268259 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -4.60079e-05 Jy ! Component: 100 - total flux cleaned = -8.97557e-05 Jy ! Component: 150 - total flux cleaned = -0.000131301 Jy ! Component: 200 - total flux cleaned = -0.000189853 Jy ! Total flux subtracted in 200 components = -0.000189853 Jy ! Clean residual min=-0.001690 max=0.001697 Jy/beam ! Clean residual mean=-0.000001 rms=0.000451 Jy/beam ! Combined flux in latest and established models = 0.268069 Jy ! Adding 35 model components to the UV plane model. ! The established model now contains 66 components and 0.268069 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.427 mas, bmaj=7.824 mas, bpa=-3.568 degrees ! Estimated noise=628.555 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000171534 Jy ! Component: 100 - total flux cleaned = 0.000169548 Jy ! Component: 150 - total flux cleaned = 0.000133191 Jy ! Component: 200 - total flux cleaned = 9.84511e-05 Jy ! Total flux subtracted in 200 components = 9.84511e-05 Jy ! Clean residual min=-0.001595 max=0.001600 Jy/beam ! Clean residual mean=-0.000000 rms=0.000387 Jy/beam ! Combined flux in latest and established models = 0.268167 Jy selfcal ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 77 components and 0.268167 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.091650Jy sigma=0.000696 ! Fit after self-cal, rms=0.091652Jy sigma=0.000696 wmodel J0833+0350_S_2017_04_28_pus_map.mod ! Writing 77 model components to file: J0833+0350_S_2017_04_28_pus_map.mod wobs J0833+0350_S_2017_04_28_pus_uvs.fits ! Writing UV FITS file: J0833+0350_S_2017_04_28_pus_uvs.fits wwins J0833+0350_S_2017_04_28_pus_map.win ! wwins: Wrote 2 windows to J0833+0350_S_2017_04_28_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000117318 Jy ! Component: 100 - total flux cleaned = 1.55816e-05 Jy ! Component: 150 - total flux cleaned = 0.00024217 Jy ! Component: 200 - total flux cleaned = 0.000411284 Jy ! Component: 250 - total flux cleaned = 0.000551885 Jy ! Component: 300 - total flux cleaned = 0.000643065 Jy ! Component: 350 - total flux cleaned = 0.000755069 Jy ! Component: 400 - total flux cleaned = 0.000843156 Jy ! Component: 450 - total flux cleaned = 0.00099439 Jy ! Component: 500 - total flux cleaned = 0.00107885 Jy ! Component: 550 - total flux cleaned = 0.00118238 Jy ! Component: 600 - total flux cleaned = 0.00128392 Jy ! Component: 650 - total flux cleaned = 0.00132392 Jy ! Component: 700 - total flux cleaned = 0.00146242 Jy ! Component: 750 - total flux cleaned = 0.00152037 Jy ! Component: 800 - total flux cleaned = 0.00155869 Jy ! Component: 850 - total flux cleaned = 0.00163456 Jy ! Component: 900 - total flux cleaned = 0.00163452 Jy ! Component: 950 - total flux cleaned = 0.0016532 Jy ! Component: 1000 - total flux cleaned = 0.00181675 Jy ! Component: 1050 - total flux cleaned = 0.00187009 Jy ! Component: 1100 - total flux cleaned = 0.00192345 Jy ! Component: 1150 - total flux cleaned = 0.0020109 Jy ! Component: 1200 - total flux cleaned = 0.00208014 Jy ! Component: 1250 - total flux cleaned = 0.00214891 Jy ! Component: 1300 - total flux cleaned = 0.00216592 Jy ! Component: 1350 - total flux cleaned = 0.00218266 Jy ! Component: 1400 - total flux cleaned = 0.00218255 Jy ! Component: 1450 - total flux cleaned = 0.00221533 Jy ! Component: 1500 - total flux cleaned = 0.00219899 Jy ! Component: 1550 - total flux cleaned = 0.00221518 Jy ! Component: 1600 - total flux cleaned = 0.00223086 Jy ! Component: 1650 - total flux cleaned = 0.00221529 Jy ! Component: 1700 - total flux cleaned = 0.00219983 Jy ! Component: 1750 - total flux cleaned = 0.0023085 Jy ! Component: 1800 - total flux cleaned = 0.00230835 Jy ! Component: 1850 - total flux cleaned = 0.00226239 Jy ! Component: 1900 - total flux cleaned = 0.00227767 Jy ! Component: 1950 - total flux cleaned = 0.00230781 Jy ! Component: 2000 - total flux cleaned = 0.00229333 Jy ! Component: 2050 - total flux cleaned = 0.00235253 Jy ! Component: 2100 - total flux cleaned = 0.00233773 Jy ! Component: 2150 - total flux cleaned = 0.00235204 Jy ! Component: 2200 - total flux cleaned = 0.00229438 Jy ! Component: 2250 - total flux cleaned = 0.00235151 Jy ! Component: 2300 - total flux cleaned = 0.00226652 Jy ! Component: 2350 - total flux cleaned = 0.00235085 Jy ! Component: 2400 - total flux cleaned = 0.00226707 Jy ! Component: 2450 - total flux cleaned = 0.00233632 Jy ! Component: 2500 - total flux cleaned = 0.00228132 Jy ! Component: 2550 - total flux cleaned = 0.00228137 Jy ! Component: 2600 - total flux cleaned = 0.00232201 Jy ! Component: 2650 - total flux cleaned = 0.0022949 Jy ! Component: 2700 - total flux cleaned = 0.00228136 Jy ! Component: 2750 - total flux cleaned = 0.00228124 Jy ! Component: 2800 - total flux cleaned = 0.00222837 Jy ! Component: 2850 - total flux cleaned = 0.00216277 Jy ! Component: 2900 - total flux cleaned = 0.00214969 Jy ! Component: 2950 - total flux cleaned = 0.00212376 Jy ! Component: 3000 - total flux cleaned = 0.00207232 Jy ! Component: 3050 - total flux cleaned = 0.00204681 Jy ! Component: 3100 - total flux cleaned = 0.00200863 Jy ! Component: 3150 - total flux cleaned = 0.00200872 Jy ! Component: 3200 - total flux cleaned = 0.0020086 Jy ! Component: 3250 - total flux cleaned = 0.00195875 Jy ! Component: 3300 - total flux cleaned = 0.00193417 Jy ! Component: 3350 - total flux cleaned = 0.00190945 Jy ! Component: 3400 - total flux cleaned = 0.00184833 Jy ! Component: 3450 - total flux cleaned = 0.00186049 Jy ! Component: 3500 - total flux cleaned = 0.00184842 Jy ! Component: 3550 - total flux cleaned = 0.00177625 Jy ! Component: 3600 - total flux cleaned = 0.00178802 Jy ! Component: 3650 - total flux cleaned = 0.0017166 Jy ! Component: 3700 - total flux cleaned = 0.0016337 Jy ! Component: 3750 - total flux cleaned = 0.00162196 Jy ! Component: 3800 - total flux cleaned = 0.00165702 Jy ! Component: 3850 - total flux cleaned = 0.00164539 Jy ! Component: 3900 - total flux cleaned = 0.00159912 Jy ! Component: 3950 - total flux cleaned = 0.00161058 Jy ! Component: 4000 - total flux cleaned = 0.00161055 Jy ! Component: 4050 - total flux cleaned = 0.00157643 Jy ! Total flux subtracted in 4096 components = 0.00164443 Jy ! Clean residual min=-0.000598 max=0.000728 Jy/beam ! Clean residual mean=0.000001 rms=0.000215 Jy/beam ! Combined flux in latest and established models = 0.269812 Jy keep ! Adding 292 model components to the UV plane model. ! The established model now contains 369 components and 0.269812 Jy ![Exited script file: muppet] wmap "J0833+0350_S_2017_04_28_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.427 x 7.824 at -3.568 degrees (North through East) ! Clean map min=-0.0012586 max=0.26486 Jy/beam ! Writing clean map to FITS file: J0833+0350_S_2017_04_28_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.26486 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000213807 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.242173 0.242173 0.484346 0.968693 1.93739 3.87477 7.74954 15.4991 30.9982 61.9963 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0006 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.264 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.427 x 7.824 at -3.568 degrees (North through East) ! Clean map min=-0.0012586 max=0.26486 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J0833+0350_S_2017_04_28_pus_uvs.log closed on Thu May 2 16:21:26 2019