! Started logfile: J0830+2410_S_2017_08_05_pus_uvs.log on Thu May 9 19:24:36 2019 obs J0830+2410_S_2017_08_05_pus_uva.fits ! Reading UV FITS file: J0830+2410_S_2017_08_05_pus_uva.fits ! AN table 1: 10 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.184444 visibilities/baseline/integration-bin. ! *** This seems a bit low - see "help observe" on the binwid argument. ! Found source: J0830+2410 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 513 lines of history. ! ! Reading 332 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J0830+2410_S_2017_08_05_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 57 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 57 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 57 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 100 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.602886Jy sigma=0.005962 ! Fit after self-cal, rms=0.544917Jy sigma=0.005462 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=1.868 mas, bmaj=6.29 mas, bpa=-2.15 degrees ! Estimated noise=5504.18 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.36064 Jy ! Component: 100 - total flux cleaned = 0.459807 Jy ! Total flux subtracted in 100 components = 0.459807 Jy ! Clean residual min=-0.049994 max=0.051453 Jy/beam ! Clean residual mean=0.000007 rms=0.017167 Jy/beam ! Combined flux in latest and established models = 0.459807 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 12 components and 0.459807 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.136026Jy sigma=0.001384 ! Fit after self-cal, rms=0.135815Jy sigma=0.001382 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.056 mas, bmaj=6.677 mas, bpa=0.04564 degrees ! Estimated noise=4445.31 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.061179 Jy ! Component: 100 - total flux cleaned = 0.0647719 Jy ! Component: 150 - total flux cleaned = 0.0595038 Jy ! Component: 200 - total flux cleaned = 0.0544468 Jy ! Total flux subtracted in 200 components = 0.0544468 Jy ! Clean residual min=-0.014706 max=0.014578 Jy/beam ! Clean residual mean=0.000002 rms=0.006230 Jy/beam ! Combined flux in latest and established models = 0.514254 Jy ! Performing phase self-cal ! Adding 56 model components to the UV plane model. ! The established model now contains 67 components and 0.514254 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.077632Jy sigma=0.000765 ! Fit after self-cal, rms=0.077245Jy sigma=0.000762 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 0.92 KP 1.00* ! LA 1.00* MK 1.03 NL 0.87 OV 0.99 ! PT 1.00* SC 1.05 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 0.96 KP 1.00* ! LA 1.00* MK 1.02 NL 0.98 OV 1.00 ! PT 1.00* SC 1.02 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 0.95 KP 1.00* ! LA 1.00* MK 0.99 NL 1.07 OV 0.95 ! PT 1.00* SC 1.01 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 0.00* FD 0.00* HN 0.00* KP 0.00* ! LA 0.00* MK 0.00* NL 0.00* OV 0.00* ! PT 0.00* SC 0.00* ! ! ! Fit before self-cal, rms=0.077245Jy sigma=0.000762 ! Fit after self-cal, rms=0.064813Jy sigma=0.000650 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.075 mas, bmaj=6.715 mas, bpa=-0.2645 degrees ! Estimated noise=4333.45 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0151114 Jy ! Component: 100 - total flux cleaned = 0.0171744 Jy ! Component: 150 - total flux cleaned = 0.0171712 Jy ! Component: 200 - total flux cleaned = 0.0173726 Jy ! Total flux subtracted in 200 components = 0.0173726 Jy ! Clean residual min=-0.003135 max=0.003128 Jy/beam ! Clean residual mean=0.000000 rms=0.001038 Jy/beam ! Combined flux in latest and established models = 0.531627 Jy ! Performing phase self-cal ! Adding 47 model components to the UV plane model. ! The established model now contains 114 components and 0.531627 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.061004Jy sigma=0.000611 ! Fit after self-cal, rms=0.060896Jy sigma=0.000610 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.060896Jy sigma=0.000610 ! Fit after self-cal, rms=0.060865Jy sigma=0.000609 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.077 mas, bmaj=6.715 mas, bpa=-0.2324 degrees ! Estimated noise=4330.05 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0015574 Jy ! Component: 100 - total flux cleaned = 0.00262086 Jy ! Component: 150 - total flux cleaned = 0.00361151 Jy ! Component: 200 - total flux cleaned = 0.00395791 Jy ! Total flux subtracted in 200 components = 0.00395791 Jy ! Clean residual min=-0.001391 max=0.001391 Jy/beam ! Clean residual mean=-0.000000 rms=0.000497 Jy/beam ! Combined flux in latest and established models = 0.535585 Jy selfcal ! Performing phase self-cal ! Adding 49 model components to the UV plane model. ! The established model now contains 160 components and 0.535585 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.060446Jy sigma=0.000605 ! Fit after self-cal, rms=0.060432Jy sigma=0.000605 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000942133 Jy ! Component: 100 - total flux cleaned = 0.0014717 Jy ! Component: 150 - total flux cleaned = 0.00189601 Jy ! Component: 200 - total flux cleaned = 0.00251183 Jy ! Total flux subtracted in 200 components = 0.00251183 Jy ! Clean residual min=-0.000900 max=0.000897 Jy/beam ! Clean residual mean=-0.000000 rms=0.000316 Jy/beam ! Combined flux in latest and established models = 0.538097 Jy ! Performing phase self-cal ! Adding 45 model components to the UV plane model. ! The established model now contains 198 components and 0.538096 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.060308Jy sigma=0.000603 ! Fit after self-cal, rms=0.060303Jy sigma=0.000603 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.060303Jy sigma=0.000603 ! Fit after self-cal, rms=0.060307Jy sigma=0.000603 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.078 mas, bmaj=6.714 mas, bpa=-0.2193 degrees ! Estimated noise=4331.74 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -7.91713e-05 Jy ! Component: 100 - total flux cleaned = -2.83038e-05 Jy ! Component: 150 - total flux cleaned = 1.14636e-05 Jy ! Component: 200 - total flux cleaned = 0.000129925 Jy ! Total flux subtracted in 200 components = 0.000129925 Jy ! Clean residual min=-0.000639 max=0.000646 Jy/beam ! Clean residual mean=-0.000000 rms=0.000220 Jy/beam ! Combined flux in latest and established models = 0.538226 Jy selfcal ! Performing phase self-cal ! Adding 51 model components to the UV plane model. ! The established model now contains 231 components and 0.538226 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.060246Jy sigma=0.000603 ! Fit after self-cal, rms=0.060243Jy sigma=0.000603 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000275397 Jy ! Component: 100 - total flux cleaned = 0.00033844 Jy ! Component: 150 - total flux cleaned = 0.000216752 Jy ! Component: 200 - total flux cleaned = 0.000128429 Jy ! Total flux subtracted in 200 components = 0.000128429 Jy ! Clean residual min=-0.000483 max=0.000483 Jy/beam ! Clean residual mean=-0.000000 rms=0.000157 Jy/beam ! Combined flux in latest and established models = 0.538355 Jy ! Performing phase self-cal ! Adding 45 model components to the UV plane model. ! The established model now contains 262 components and 0.538355 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.060214Jy sigma=0.000602 ! Fit after self-cal, rms=0.060213Jy sigma=0.000602 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.060213Jy sigma=0.000602 ! Fit after self-cal, rms=0.060212Jy sigma=0.000602 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=4.314 mas, bmaj=8.466 mas, bpa=-0.1519 degrees ! Estimated noise=6454.96 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -3.72721e-05 Jy ! Component: 100 - total flux cleaned = -3.70159e-05 Jy ! Component: 150 - total flux cleaned = 2.65953e-05 Jy ! Component: 200 - total flux cleaned = 0.000267286 Jy ! Total flux subtracted in 200 components = 0.000267286 Jy ! Clean residual min=-0.000611 max=0.000610 Jy/beam ! Clean residual mean=-0.000000 rms=0.000170 Jy/beam ! Combined flux in latest and established models = 0.538622 Jy selfcal ! Performing phase self-cal ! Adding 31 model components to the UV plane model. ! The established model now contains 290 components and 0.538622 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.060197Jy sigma=0.000602 ! Fit after self-cal, rms=0.060196Jy sigma=0.000602 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 2.73975e-05 Jy ! Component: 100 - total flux cleaned = 0.000138383 Jy ! Component: 150 - total flux cleaned = 0.000284888 Jy ! Component: 200 - total flux cleaned = 0.000362609 Jy ! Total flux subtracted in 200 components = 0.000362609 Jy ! Clean residual min=-0.000342 max=0.000348 Jy/beam ! Clean residual mean=0.000000 rms=0.000094 Jy/beam ! Combined flux in latest and established models = 0.538984 Jy ! Performing phase self-cal ! Adding 34 model components to the UV plane model. ! The established model now contains 321 components and 0.538984 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.060189Jy sigma=0.000602 ! Fit after self-cal, rms=0.060188Jy sigma=0.000602 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=2.078 mas, bmaj=6.714 mas, bpa=-0.2151 degrees ! Estimated noise=4332.77 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.078 x 6.714 at -0.2151 degrees (North through East) ! Clean map min=-0.01019 max=0.41825 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=1.884 mas, bmaj=6.324 mas, bpa=-2.464 degrees ! Estimated noise=5329.36 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.349055 Jy ! Component: 100 - total flux cleaned = 0.447938 Jy ! Component: 150 - total flux cleaned = 0.477009 Jy ! Component: 200 - total flux cleaned = 0.491918 Jy ! Total flux subtracted in 200 components = 0.491918 Jy ! Clean residual min=-0.020909 max=0.020771 Jy/beam ! Clean residual mean=0.000003 rms=0.007824 Jy/beam ! Combined flux in latest and established models = 0.491918 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 25 model components to the UV plane model. ! The established model now contains 25 components and 0.491918 Jy ! Inverting map and beam ! Estimated beam: bmin=2.078 mas, bmaj=6.714 mas, bpa=-0.2151 degrees ! Estimated noise=4332.77 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00764692 Jy ! Component: 100 - total flux cleaned = 0.00741219 Jy ! Component: 150 - total flux cleaned = 0.00796032 Jy ! Component: 200 - total flux cleaned = 0.0094733 Jy ! Total flux subtracted in 200 components = 0.0094733 Jy ! Clean residual min=-0.007543 max=0.007458 Jy/beam ! Clean residual mean=0.000001 rms=0.003420 Jy/beam ! Combined flux in latest and established models = 0.501392 Jy ! Adding 60 model components to the UV plane model. ! The established model now contains 83 components and 0.501392 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=4.314 mas, bmaj=8.466 mas, bpa=-0.1519 degrees ! Estimated noise=6454.96 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00501262 Jy ! Component: 100 - total flux cleaned = -0.00575341 Jy ! Component: 150 - total flux cleaned = -0.00348976 Jy ! Component: 200 - total flux cleaned = -0.00263094 Jy ! Total flux subtracted in 200 components = -0.00263094 Jy ! Clean residual min=-0.002449 max=0.002441 Jy/beam ! Clean residual mean=-0.000000 rms=0.001255 Jy/beam ! Combined flux in latest and established models = 0.498761 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 6.99722e-06 Jy ! Component: 100 - total flux cleaned = 0.00031195 Jy ! Component: 150 - total flux cleaned = 0.000498757 Jy ! Component: 200 - total flux cleaned = 0.00088084 Jy ! Total flux subtracted in 200 components = 0.00088084 Jy ! Clean residual min=-0.004113 max=0.004082 Jy/beam ! Clean residual mean=-0.000002 rms=0.001433 Jy/beam ! Combined flux in latest and established models = 0.499642 Jy ! Adding 144 model components to the UV plane model. ! The established model now contains 226 components and 0.499642 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=2.078 mas, bmaj=6.714 mas, bpa=-0.2151 degrees ! Estimated noise=4332.77 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00242485 Jy ! Component: 100 - total flux cleaned = 0.00548067 Jy ! Component: 150 - total flux cleaned = 0.00717981 Jy ! Component: 200 - total flux cleaned = 0.00841689 Jy ! Total flux subtracted in 200 components = 0.00841689 Jy ! Clean residual min=-0.001949 max=0.001935 Jy/beam ! Clean residual mean=-0.000000 rms=0.000764 Jy/beam ! Combined flux in latest and established models = 0.508059 Jy selfcal ! Performing phase self-cal ! Adding 52 model components to the UV plane model. ! The established model now contains 278 components and 0.508059 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.060616Jy sigma=0.000606 ! Fit after self-cal, rms=0.060580Jy sigma=0.000606 wmodel J0830+2410_S_2017_08_05_pus_map.mod ! Writing 278 model components to file: J0830+2410_S_2017_08_05_pus_map.mod wobs J0830+2410_S_2017_08_05_pus_uvs.fits ! Writing UV FITS file: J0830+2410_S_2017_08_05_pus_uvs.fits wwins J0830+2410_S_2017_08_05_pus_map.win ! wwins: No CLEAN windows to write. ! Error occured in command: wwins ![Exited script file: muppet] ! wmap "J0830+2410_S_2017_08_05_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.078 x 6.714 at -0.2151 degrees (North through East) ! Clean map min=-0.0080087 max=0.41763 Jy/beam ! Writing clean map to FITS file: J0830+2410_S_2017_08_05_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.417633 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000736669 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.529174 0.529174 1.05835 2.1167 4.23339 8.46679 16.9336 33.8672 67.7343 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0022 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.417 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.078 x 6.714 at -0.2151 degrees (North through East) ! Clean map min=-0.0080087 max=0.41763 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J0830+2410_S_2017_08_05_pus_uvs.log closed on Thu May 9 19:24:39 2019