! Started logfile: J0830+0624_S_2017_04_28_pus_uvs.log on Thu May 2 16:21:10 2019 obs J0830+0624_S_2017_04_28_pus_uva.fits ! Reading UV FITS file: J0830+0624_S_2017_04_28_pus_uva.fits ! AN table 1: 161 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.705452 visibilities/baseline/integration-bin. ! Found source: J0830+0624 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 671 lines of history. ! ! Reading 20444 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J0830+0624_S_2017_04_28_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 358 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 358 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 358 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 974 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.946865Jy sigma=0.023264 ! Fit after self-cal, rms=0.928915Jy sigma=0.023243 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.944 mas, bmaj=7.467 mas, bpa=-7.858 degrees ! Estimated noise=694.116 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0406774 Jy ! Component: 100 - total flux cleaned = 0.0509469 Jy ! Total flux subtracted in 100 components = 0.0509469 Jy ! Clean residual min=-0.013903 max=0.014470 Jy/beam ! Clean residual mean=0.000052 rms=0.004673 Jy/beam ! Combined flux in latest and established models = 0.0509469 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 11 components and 0.0509469 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.104963Jy sigma=0.001277 ! Fit after self-cal, rms=0.104921Jy sigma=0.001274 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.66 mas, bmaj=8.19 mas, bpa=-3.794 degrees ! Estimated noise=575.817 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0132155 Jy ! Component: 100 - total flux cleaned = 0.0168982 Jy ! Component: 150 - total flux cleaned = 0.016887 Jy ! Component: 200 - total flux cleaned = 0.0169969 Jy ! Total flux subtracted in 200 components = 0.0169969 Jy ! Clean residual min=-0.012493 max=0.013802 Jy/beam ! Clean residual mean=0.000201 rms=0.004147 Jy/beam ! Combined flux in latest and established models = 0.0679438 Jy ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 28 components and 0.0679438 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.101013Jy sigma=0.001557 ! Fit after self-cal, rms=0.100945Jy sigma=0.001557 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! A total of 132 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.03 FD 0.79 HN 0.93 KP 0.82 ! LA 0.81 MK 1.11 NL 0.83 OV 0.86 ! PT 0.89 SC 1.00 ! ! ! Correcting IF 2. ! A total of 132 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.89 FD 0.75 HN 1.05 KP 0.80 ! LA 0.75 MK 0.93 NL 0.90 OV 0.87 ! PT 0.92 SC 1.17 ! ! ! Correcting IF 3. ! A total of 132 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.92 FD 0.80 HN 0.99 KP 0.83 ! LA 0.79 MK 1.15 NL 0.88 OV 0.80 ! PT 0.89 SC 1.15 ! ! ! Correcting IF 4. ! A total of 6 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 0.87 HN 0.88 KP 1.00* ! LA 24.19 MK 0.84 NL 1.00* OV 1.00* ! PT 0.98 SC 1.00* ! ! ! Fit before self-cal, rms=0.100945Jy sigma=0.001557 ! Fit after self-cal, rms=0.670621Jy sigma=0.000679 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.67 mas, bmaj=8.177 mas, bpa=-2.926 degrees ! Estimated noise=585.539 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00239743 Jy ! Component: 100 - total flux cleaned = 0.00265349 Jy ! Component: 150 - total flux cleaned = 0.00261122 Jy ! Component: 200 - total flux cleaned = 0.00257293 Jy ! Total flux subtracted in 200 components = 0.00257293 Jy ! Clean residual min=-0.002352 max=0.002435 Jy/beam ! Clean residual mean=-0.000000 rms=0.000629 Jy/beam ! Combined flux in latest and established models = 0.0705167 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 36 components and 0.0705167 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.670469Jy sigma=0.000678 ! Fit after self-cal, rms=0.671285Jy sigma=0.000674 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.671285Jy sigma=0.000674 ! Fit after self-cal, rms=0.825356Jy sigma=0.000667 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.677 mas, bmaj=8.124 mas, bpa=-2.552 degrees ! Estimated noise=591.34 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00165133 Jy ! Component: 100 - total flux cleaned = 0.0023823 Jy ! Component: 150 - total flux cleaned = 0.00254275 Jy ! Component: 200 - total flux cleaned = 0.00260099 Jy ! Total flux subtracted in 200 components = 0.00260099 Jy ! Clean residual min=-0.001789 max=0.001903 Jy/beam ! Clean residual mean=0.000007 rms=0.000443 Jy/beam ! Combined flux in latest and established models = 0.0731177 Jy selfcal ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 40 components and 0.0731177 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.825277Jy sigma=0.000667 ! Fit after self-cal, rms=0.825294Jy sigma=0.000666 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000277066 Jy ! Component: 100 - total flux cleaned = 0.000274701 Jy ! Component: 150 - total flux cleaned = 0.000300154 Jy ! Component: 200 - total flux cleaned = 0.000348469 Jy ! Total flux subtracted in 200 components = 0.000348469 Jy ! Clean residual min=-0.001696 max=0.001783 Jy/beam ! Clean residual mean=0.000007 rms=0.000445 Jy/beam ! Combined flux in latest and established models = 0.0734661 Jy ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 40 components and 0.0734661 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.825287Jy sigma=0.000666 ! Fit after self-cal, rms=0.825286Jy sigma=0.000666 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.825286Jy sigma=0.000666 ! Fit after self-cal, rms=0.088039Jy sigma=0.000663 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.633 mas, bmaj=8.054 mas, bpa=-2.569 degrees ! Estimated noise=586.238 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00087047 Jy ! Component: 100 - total flux cleaned = 0.000983588 Jy ! Component: 150 - total flux cleaned = 0.0010318 Jy ! Component: 200 - total flux cleaned = 0.00112062 Jy ! Total flux subtracted in 200 components = 0.00112062 Jy ! Clean residual min=-0.001592 max=0.001804 Jy/beam ! Clean residual mean=0.000001 rms=0.000385 Jy/beam ! Combined flux in latest and established models = 0.0745868 Jy selfcal ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 49 components and 0.0745867 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.088015Jy sigma=0.000663 ! Fit after self-cal, rms=0.087931Jy sigma=0.000662 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (75.5, -82). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000919055 Jy ! Component: 100 - total flux cleaned = 0.00101308 Jy ! Component: 150 - total flux cleaned = 0.00104656 Jy ! Component: 200 - total flux cleaned = 0.00111071 Jy ! Total flux subtracted in 200 components = 0.00111071 Jy ! Clean residual min=-0.001584 max=0.001437 Jy/beam ! Clean residual mean=0.000001 rms=0.000368 Jy/beam ! Combined flux in latest and established models = 0.0756975 Jy ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 69 components and 0.0756975 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.087884Jy sigma=0.000662 ! Fit after self-cal, rms=0.087879Jy sigma=0.000662 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.087879Jy sigma=0.000662 ! Fit after self-cal, rms=0.087263Jy sigma=0.000662 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.721 mas, bmaj=11.54 mas, bpa=-1.603 degrees ! Estimated noise=670.007 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000779378 Jy ! Component: 100 - total flux cleaned = 0.000937724 Jy ! Component: 150 - total flux cleaned = 0.000999644 Jy ! Component: 200 - total flux cleaned = 0.00105154 Jy ! Total flux subtracted in 200 components = 0.00105154 Jy ! Clean residual min=-0.001406 max=0.001540 Jy/beam ! Clean residual mean=0.000001 rms=0.000375 Jy/beam ! Combined flux in latest and established models = 0.076749 Jy selfcal ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 84 components and 0.076749 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.087256Jy sigma=0.000662 ! Fit after self-cal, rms=0.087246Jy sigma=0.000662 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000267349 Jy ! Component: 100 - total flux cleaned = 0.000267123 Jy ! Component: 150 - total flux cleaned = 0.000252878 Jy ! Component: 200 - total flux cleaned = 0.000265992 Jy ! Total flux subtracted in 200 components = 0.000265992 Jy ! Clean residual min=-0.001380 max=0.001527 Jy/beam ! Clean residual mean=0.000002 rms=0.000374 Jy/beam ! Combined flux in latest and established models = 0.077015 Jy ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 92 components and 0.077015 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.087244Jy sigma=0.000662 ! Fit after self-cal, rms=0.087243Jy sigma=0.000662 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.608 mas, bmaj=8.025 mas, bpa=-2.6 degrees ! Estimated noise=583.905 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.608 x 8.025 at -2.6 degrees (North through East) ! Clean map min=-0.0015305 max=0.060068 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.99 mas, bmaj=7.274 mas, bpa=-3.565 degrees ! Estimated noise=778.163 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0456241 Jy ! Component: 100 - total flux cleaned = 0.0619697 Jy ! Component: 150 - total flux cleaned = 0.0697504 Jy ! Component: 200 - total flux cleaned = 0.0739487 Jy ! Total flux subtracted in 200 components = 0.0739487 Jy ! Clean residual min=-0.002419 max=0.002163 Jy/beam ! Clean residual mean=-0.000000 rms=0.000561 Jy/beam ! Combined flux in latest and established models = 0.0739487 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 18 model components to the UV plane model. ! The established model now contains 18 components and 0.0739487 Jy ! Inverting map and beam ! Estimated beam: bmin=3.608 mas, bmaj=8.025 mas, bpa=-2.6 degrees ! Estimated noise=583.905 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00266172 Jy ! Component: 100 - total flux cleaned = 0.00356621 Jy ! Component: 150 - total flux cleaned = 0.0038649 Jy ! Component: 200 - total flux cleaned = 0.00386772 Jy ! Total flux subtracted in 200 components = 0.00386772 Jy ! Clean residual min=-0.001679 max=0.001592 Jy/beam ! Clean residual mean=0.000000 rms=0.000393 Jy/beam ! Combined flux in latest and established models = 0.0778164 Jy ! Adding 19 model components to the UV plane model. ! The established model now contains 36 components and 0.0778164 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.721 mas, bmaj=11.54 mas, bpa=-1.603 degrees ! Estimated noise=670.007 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 2.05803e-05 Jy ! Component: 100 - total flux cleaned = -6.20561e-05 Jy ! Component: 150 - total flux cleaned = -0.000188626 Jy ! Component: 200 - total flux cleaned = -0.000256409 Jy ! Total flux subtracted in 200 components = -0.000256409 Jy ! Clean residual min=-0.001462 max=0.001553 Jy/beam ! Clean residual mean=0.000002 rms=0.000394 Jy/beam ! Combined flux in latest and established models = 0.07756 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -2.12096e-05 Jy ! Component: 100 - total flux cleaned = -4.1332e-05 Jy ! Component: 150 - total flux cleaned = -7.87517e-05 Jy ! Component: 200 - total flux cleaned = -9.66295e-05 Jy ! Total flux subtracted in 200 components = -9.66295e-05 Jy ! Clean residual min=-0.001419 max=0.001549 Jy/beam ! Clean residual mean=0.000002 rms=0.000387 Jy/beam ! Combined flux in latest and established models = 0.0774634 Jy ! Adding 20 model components to the UV plane model. ! The established model now contains 52 components and 0.0774634 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.608 mas, bmaj=8.025 mas, bpa=-2.6 degrees ! Estimated noise=583.905 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000359669 Jy ! Component: 100 - total flux cleaned = -0.000434436 Jy ! Component: 150 - total flux cleaned = -0.000504199 Jy ! Component: 200 - total flux cleaned = -0.000599071 Jy ! Total flux subtracted in 200 components = -0.000599071 Jy ! Clean residual min=-0.001551 max=0.001526 Jy/beam ! Clean residual mean=0.000001 rms=0.000365 Jy/beam ! Combined flux in latest and established models = 0.0768643 Jy selfcal ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 66 components and 0.0768643 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.087255Jy sigma=0.000662 ! Fit after self-cal, rms=0.087255Jy sigma=0.000661 wmodel J0830+0624_S_2017_04_28_pus_map.mod ! Writing 66 model components to file: J0830+0624_S_2017_04_28_pus_map.mod wobs J0830+0624_S_2017_04_28_pus_uvs.fits ! Writing UV FITS file: J0830+0624_S_2017_04_28_pus_uvs.fits wwins J0830+0624_S_2017_04_28_pus_map.win ! wwins: Wrote 2 windows to J0830+0624_S_2017_04_28_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000352081 Jy ! Component: 100 - total flux cleaned = -0.000302291 Jy ! Component: 150 - total flux cleaned = -0.00010355 Jy ! Component: 200 - total flux cleaned = 8.88972e-05 Jy ! Component: 250 - total flux cleaned = 0.000275896 Jy ! Component: 300 - total flux cleaned = 0.000434522 Jy ! Component: 350 - total flux cleaned = 0.000589166 Jy ! Component: 400 - total flux cleaned = 0.000675015 Jy ! Component: 450 - total flux cleaned = 0.00075928 Jy ! Component: 500 - total flux cleaned = 0.000841751 Jy ! Component: 550 - total flux cleaned = 0.000963397 Jy ! Component: 600 - total flux cleaned = 0.00102329 Jy ! Component: 650 - total flux cleaned = 0.00120005 Jy ! Component: 700 - total flux cleaned = 0.0012385 Jy ! Component: 750 - total flux cleaned = 0.00137182 Jy ! Component: 800 - total flux cleaned = 0.0014277 Jy ! Component: 850 - total flux cleaned = 0.00142795 Jy ! Component: 900 - total flux cleaned = 0.00150119 Jy ! Component: 950 - total flux cleaned = 0.00155526 Jy ! Component: 1000 - total flux cleaned = 0.00162648 Jy ! Component: 1050 - total flux cleaned = 0.00166177 Jy ! Component: 1100 - total flux cleaned = 0.0016969 Jy ! Component: 1150 - total flux cleaned = 0.00174886 Jy ! Component: 1200 - total flux cleaned = 0.0018171 Jy ! Component: 1250 - total flux cleaned = 0.00186766 Jy ! Component: 1300 - total flux cleaned = 0.00188429 Jy ! Component: 1350 - total flux cleaned = 0.00196697 Jy ! Component: 1400 - total flux cleaned = 0.0020158 Jy ! Component: 1450 - total flux cleaned = 0.00206427 Jy ! Component: 1500 - total flux cleaned = 0.00212831 Jy ! Component: 1550 - total flux cleaned = 0.00216 Jy ! Component: 1600 - total flux cleaned = 0.00217563 Jy ! Component: 1650 - total flux cleaned = 0.00214439 Jy ! Component: 1700 - total flux cleaned = 0.00222175 Jy ! Component: 1750 - total flux cleaned = 0.00220621 Jy ! Component: 1800 - total flux cleaned = 0.00222153 Jy ! Component: 1850 - total flux cleaned = 0.00226685 Jy ! Component: 1900 - total flux cleaned = 0.00231182 Jy ! Component: 1950 - total flux cleaned = 0.00232665 Jy ! Component: 2000 - total flux cleaned = 0.00237092 Jy ! Component: 2050 - total flux cleaned = 0.00238534 Jy ! Component: 2100 - total flux cleaned = 0.0023998 Jy ! Component: 2150 - total flux cleaned = 0.00239991 Jy ! Component: 2200 - total flux cleaned = 0.00242861 Jy ! Component: 2250 - total flux cleaned = 0.00248538 Jy ! Component: 2300 - total flux cleaned = 0.00251355 Jy ! Component: 2350 - total flux cleaned = 0.00249958 Jy ! Component: 2400 - total flux cleaned = 0.00252746 Jy ! Component: 2450 - total flux cleaned = 0.00258283 Jy ! Component: 2500 - total flux cleaned = 0.00261023 Jy ! Component: 2550 - total flux cleaned = 0.00265128 Jy ! Component: 2600 - total flux cleaned = 0.00270533 Jy ! Component: 2650 - total flux cleaned = 0.00267833 Jy ! Component: 2700 - total flux cleaned = 0.0027051 Jy ! Component: 2750 - total flux cleaned = 0.00274475 Jy ! Component: 2800 - total flux cleaned = 0.00273151 Jy ! Component: 2850 - total flux cleaned = 0.00277088 Jy ! Component: 2900 - total flux cleaned = 0.00280969 Jy ! Component: 2950 - total flux cleaned = 0.00275802 Jy ! Component: 3000 - total flux cleaned = 0.0028095 Jy ! Component: 3050 - total flux cleaned = 0.00284764 Jy ! Component: 3100 - total flux cleaned = 0.00288556 Jy ! Component: 3150 - total flux cleaned = 0.00286032 Jy ! Component: 3200 - total flux cleaned = 0.00289784 Jy ! Component: 3250 - total flux cleaned = 0.00286051 Jy ! Component: 3300 - total flux cleaned = 0.00289763 Jy ! Component: 3350 - total flux cleaned = 0.00288545 Jy ! Component: 3400 - total flux cleaned = 0.00291 Jy ! Component: 3450 - total flux cleaned = 0.00288564 Jy ! Component: 3500 - total flux cleaned = 0.0029097 Jy ! Component: 3550 - total flux cleaned = 0.0029218 Jy ! Component: 3600 - total flux cleaned = 0.00293376 Jy ! Component: 3650 - total flux cleaned = 0.00288604 Jy ! Component: 3700 - total flux cleaned = 0.00295717 Jy ! Component: 3750 - total flux cleaned = 0.00295721 Jy ! Component: 3800 - total flux cleaned = 0.00301572 Jy ! Component: 3850 - total flux cleaned = 0.00300402 Jy ! Component: 3900 - total flux cleaned = 0.00301557 Jy ! Component: 3950 - total flux cleaned = 0.00300394 Jy ! Component: 4000 - total flux cleaned = 0.0030039 Jy ! Component: 4050 - total flux cleaned = 0.00304969 Jy ! Total flux subtracted in 4096 components = 0.00307245 Jy ! Clean residual min=-0.000664 max=0.000630 Jy/beam ! Clean residual mean=0.000000 rms=0.000208 Jy/beam ! Combined flux in latest and established models = 0.0799368 Jy keep ! Adding 283 model components to the UV plane model. ! The established model now contains 349 components and 0.0799368 Jy ![Exited script file: muppet] wmap "J0830+0624_S_2017_04_28_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.608 x 8.025 at -2.6 degrees (North through East) ! Clean map min=-0.0013425 max=0.059682 Jy/beam ! Writing clean map to FITS file: J0830+0624_S_2017_04_28_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.0596819 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.00020662 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -1.0386 1.0386 2.07721 4.15442 8.30884 16.6177 33.2353 66.4707 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0006 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.059 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.608 x 8.025 at -2.6 degrees (North through East) ! Clean map min=-0.0013425 max=0.059682 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J0830+0624_S_2017_04_28_pus_uvs.log closed on Thu May 2 16:21:16 2019