! Started logfile: J0825-3218_S_2017_04_28_pus_uvs.log on Thu May 2 16:20:55 2019 obs J0825-3218_S_2017_04_28_pus_uva.fits ! Reading UV FITS file: J0825-3218_S_2017_04_28_pus_uva.fits ! AN table 1: 75 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.968889 visibilities/baseline/integration-bin. ! Found source: J0825-3218 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 671 lines of history. ! ! Reading 13080 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J0825-3218_S_2017_04_28_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 13 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 13 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 13 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 311 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.719627Jy sigma=0.017007 ! Fit after self-cal, rms=0.695405Jy sigma=0.016964 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.56 mas, bmaj=7.132 mas, bpa=-7.045 degrees ! Estimated noise=1788.71 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.216249 Jy ! Component: 100 - total flux cleaned = 0.286301 Jy ! Total flux subtracted in 100 components = 0.286301 Jy ! Clean residual min=-0.034508 max=0.039382 Jy/beam ! Clean residual mean=0.000159 rms=0.011008 Jy/beam ! Combined flux in latest and established models = 0.286301 Jy ! Performing phase self-cal ! Adding 6 model components to the UV plane model. ! The established model now contains 6 components and 0.286301 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.185415Jy sigma=0.004531 ! Fit after self-cal, rms=0.185410Jy sigma=0.004530 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.28 mas, bmaj=8.805 mas, bpa=-6.477 degrees ! Estimated noise=1096.94 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0238592 Jy ! Component: 100 - total flux cleaned = 0.0314395 Jy ! Component: 150 - total flux cleaned = 0.0314408 Jy ! Component: 200 - total flux cleaned = 0.0312139 Jy ! Total flux subtracted in 200 components = 0.0312139 Jy ! Clean residual min=-0.041615 max=0.048948 Jy/beam ! Clean residual mean=0.001182 rms=0.015624 Jy/beam ! Combined flux in latest and established models = 0.317515 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 14 components and 0.317515 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.175057Jy sigma=0.004969 ! Fit after self-cal, rms=0.175079Jy sigma=0.004969 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.80 FD 0.89 HN 1.19 KP 0.85 ! LA 0.83 MK 0.97 NL 0.87 OV 0.86 ! PT 0.92 SC 0.98 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 0.79 FD 0.82 HN 1.30 KP 0.83 ! LA 0.78 MK 0.92 NL 1.03 OV 0.88 ! PT 0.94 SC 1.04 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.86 FD 0.85 HN 1.26 KP 0.86 ! LA 0.83 MK 0.94 NL 0.95 OV 0.80 ! PT 0.94 SC 1.01 ! ! ! Correcting IF 4. ! A total of 6 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.95 FD 0.89 HN 1.32 KP 1.00* ! LA 39.58 MK 0.84 NL 1.00* OV 1.00* ! PT 0.96 SC 1.00* ! ! ! Fit before self-cal, rms=0.175079Jy sigma=0.004969 ! Fit after self-cal, rms=2.847234Jy sigma=0.000743 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.282 mas, bmaj=8.419 mas, bpa=-5.478 degrees ! Estimated noise=1109.94 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00812192 Jy ! Component: 100 - total flux cleaned = 0.0108906 Jy ! Component: 150 - total flux cleaned = 0.0110319 Jy ! Component: 200 - total flux cleaned = 0.0110923 Jy ! Total flux subtracted in 200 components = 0.0110923 Jy ! Clean residual min=-0.009037 max=0.008892 Jy/beam ! Clean residual mean=-0.000017 rms=0.002186 Jy/beam ! Combined flux in latest and established models = 0.328607 Jy ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 27 components and 0.328607 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=2.845898Jy sigma=0.000744 ! Fit after self-cal, rms=2.847121Jy sigma=0.000741 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=2.847121Jy sigma=0.000741 ! Fit after self-cal, rms=3.327856Jy sigma=0.000731 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.262 mas, bmaj=8.43 mas, bpa=-5.187 degrees ! Estimated noise=1139.16 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00776315 Jy ! Component: 100 - total flux cleaned = 0.0111685 Jy ! Component: 150 - total flux cleaned = 0.0127163 Jy ! Component: 200 - total flux cleaned = 0.0130044 Jy ! Total flux subtracted in 200 components = 0.0130044 Jy ! Clean residual min=-0.007755 max=0.006538 Jy/beam ! Clean residual mean=-0.000030 rms=0.001962 Jy/beam ! Combined flux in latest and established models = 0.341611 Jy selfcal ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 44 components and 0.341611 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=3.326453Jy sigma=0.000733 ! Fit after self-cal, rms=3.326474Jy sigma=0.000733 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 9.7094e-05 Jy ! Component: 100 - total flux cleaned = 0.000201441 Jy ! Component: 150 - total flux cleaned = 0.000225394 Jy ! Component: 200 - total flux cleaned = 0.000249155 Jy ! Total flux subtracted in 200 components = 0.000249155 Jy ! Clean residual min=-0.007742 max=0.006549 Jy/beam ! Clean residual mean=-0.000029 rms=0.001959 Jy/beam ! Combined flux in latest and established models = 0.341861 Jy ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 49 components and 0.341861 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=3.326451Jy sigma=0.000733 ! Fit after self-cal, rms=3.326450Jy sigma=0.000733 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=3.326450Jy sigma=0.000733 ! Fit after self-cal, rms=2.386855Jy sigma=0.000689 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.248 mas, bmaj=8.425 mas, bpa=-5.128 degrees ! Estimated noise=1150.04 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00322862 Jy ! Component: 100 - total flux cleaned = 0.00471738 Jy ! Component: 150 - total flux cleaned = 0.00496845 Jy ! Component: 200 - total flux cleaned = 0.00502927 Jy ! Total flux subtracted in 200 components = 0.00502927 Jy ! Clean residual min=-0.004799 max=0.004623 Jy/beam ! Clean residual mean=-0.000049 rms=0.001265 Jy/beam ! Combined flux in latest and established models = 0.34689 Jy selfcal ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 56 components and 0.34689 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=2.386522Jy sigma=0.000690 ! Fit after self-cal, rms=2.386513Jy sigma=0.000689 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 3.43013e-05 Jy ! Component: 100 - total flux cleaned = 8.9321e-05 Jy ! Component: 150 - total flux cleaned = 0.00011508 Jy ! Component: 200 - total flux cleaned = 0.000113983 Jy ! Total flux subtracted in 200 components = 0.000113983 Jy ! Clean residual min=-0.004746 max=0.004576 Jy/beam ! Clean residual mean=-0.000049 rms=0.001260 Jy/beam ! Combined flux in latest and established models = 0.347004 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 62 components and 0.347004 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=2.386496Jy sigma=0.000689 ! Fit after self-cal, rms=2.386497Jy sigma=0.000689 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=2.386497Jy sigma=0.000689 ! Fit after self-cal, rms=2.417071Jy sigma=0.000688 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.308 mas, bmaj=22.06 mas, bpa=-0.4504 degrees ! Estimated noise=1365.07 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00433692 Jy ! Component: 100 - total flux cleaned = 0.0053949 Jy ! Component: 150 - total flux cleaned = 0.00536029 Jy ! Component: 200 - total flux cleaned = 0.00535628 Jy ! Total flux subtracted in 200 components = 0.00535628 Jy ! Clean residual min=-0.005705 max=0.005419 Jy/beam ! Clean residual mean=-0.000095 rms=0.001902 Jy/beam ! Combined flux in latest and established models = 0.35236 Jy selfcal ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 65 components and 0.35236 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=2.416737Jy sigma=0.000689 ! Fit after self-cal, rms=2.416736Jy sigma=0.000689 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 4.69934e-05 Jy ! Component: 100 - total flux cleaned = -1.47456e-05 Jy ! Component: 150 - total flux cleaned = -1.65056e-05 Jy ! Component: 200 - total flux cleaned = -4.0839e-05 Jy ! Total flux subtracted in 200 components = -4.0839e-05 Jy ! Clean residual min=-0.005712 max=0.005375 Jy/beam ! Clean residual mean=-0.000095 rms=0.001898 Jy/beam ! Combined flux in latest and established models = 0.352319 Jy ! Performing phase self-cal ! Adding 6 model components to the UV plane model. ! The established model now contains 65 components and 0.352319 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=2.416728Jy sigma=0.000689 ! Fit after self-cal, rms=2.416729Jy sigma=0.000689 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.238 mas, bmaj=8.412 mas, bpa=-5.12 degrees ! Estimated noise=1160.83 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.238 x 8.412 at -5.12 degrees (North through East) ! Clean map min=-0.0045207 max=0.29536 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.569 mas, bmaj=6.901 mas, bpa=-5.281 degrees ! Estimated noise=1831.82 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.220321 Jy ! Component: 100 - total flux cleaned = 0.289216 Jy ! Component: 150 - total flux cleaned = 0.317962 Jy ! Component: 200 - total flux cleaned = 0.33292 Jy ! Total flux subtracted in 200 components = 0.33292 Jy ! Clean residual min=-0.006128 max=0.007257 Jy/beam ! Clean residual mean=-0.000015 rms=0.001501 Jy/beam ! Combined flux in latest and established models = 0.33292 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 23 model components to the UV plane model. ! The established model now contains 23 components and 0.33292 Jy ! Inverting map and beam ! Estimated beam: bmin=3.238 mas, bmaj=8.412 mas, bpa=-5.12 degrees ! Estimated noise=1160.83 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0112044 Jy ! Component: 100 - total flux cleaned = 0.0161441 Jy ! Component: 150 - total flux cleaned = 0.0184304 Jy ! Component: 200 - total flux cleaned = 0.0190013 Jy ! Total flux subtracted in 200 components = 0.0190013 Jy ! Clean residual min=-0.004965 max=0.004634 Jy/beam ! Clean residual mean=-0.000050 rms=0.001269 Jy/beam ! Combined flux in latest and established models = 0.351921 Jy ! Adding 28 model components to the UV plane model. ! The established model now contains 48 components and 0.351921 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.308 mas, bmaj=22.06 mas, bpa=-0.4504 degrees ! Estimated noise=1365.07 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000683869 Jy ! Component: 100 - total flux cleaned = 0.000652334 Jy ! Component: 150 - total flux cleaned = 0.000651283 Jy ! Component: 200 - total flux cleaned = 0.000622262 Jy ! Total flux subtracted in 200 components = 0.000622262 Jy ! Clean residual min=-0.005786 max=0.005341 Jy/beam ! Clean residual mean=-0.000094 rms=0.001898 Jy/beam ! Combined flux in latest and established models = 0.352543 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -1.74962e-07 Jy ! Component: 100 - total flux cleaned = -2.52226e-05 Jy ! Component: 150 - total flux cleaned = -2.71077e-05 Jy ! Component: 200 - total flux cleaned = -4.85486e-05 Jy ! Total flux subtracted in 200 components = -4.85486e-05 Jy ! Clean residual min=-0.005789 max=0.005305 Jy/beam ! Clean residual mean=-0.000094 rms=0.001896 Jy/beam ! Combined flux in latest and established models = 0.352495 Jy ! Adding 6 model components to the UV plane model. ! The established model now contains 54 components and 0.352495 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.238 mas, bmaj=8.412 mas, bpa=-5.12 degrees ! Estimated noise=1160.83 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000303551 Jy ! Component: 100 - total flux cleaned = -0.00042296 Jy ! Component: 150 - total flux cleaned = -0.000467846 Jy ! Component: 200 - total flux cleaned = -0.000508863 Jy ! Total flux subtracted in 200 components = -0.000508863 Jy ! Clean residual min=-0.004852 max=0.004619 Jy/beam ! Clean residual mean=-0.000050 rms=0.001262 Jy/beam ! Combined flux in latest and established models = 0.351986 Jy selfcal ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 58 components and 0.351986 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=2.416666Jy sigma=0.000689 ! Fit after self-cal, rms=2.416670Jy sigma=0.000689 wmodel J0825-3218_S_2017_04_28_pus_map.mod ! Writing 58 model components to file: J0825-3218_S_2017_04_28_pus_map.mod wobs J0825-3218_S_2017_04_28_pus_uvs.fits ! Writing UV FITS file: J0825-3218_S_2017_04_28_pus_uvs.fits wwins J0825-3218_S_2017_04_28_pus_map.win ! wwins: Wrote 1 windows to J0825-3218_S_2017_04_28_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000716485 Jy ! Component: 100 - total flux cleaned = -0.000794205 Jy ! Component: 150 - total flux cleaned = -0.00109355 Jy ! Component: 200 - total flux cleaned = -0.00137899 Jy ! Component: 250 - total flux cleaned = -0.00158598 Jy ! Component: 300 - total flux cleaned = -0.00165292 Jy ! Component: 350 - total flux cleaned = -0.00171788 Jy ! Component: 400 - total flux cleaned = -0.0017179 Jy ! Component: 450 - total flux cleaned = -0.00171741 Jy ! Component: 500 - total flux cleaned = -0.00171663 Jy ! Component: 550 - total flux cleaned = -0.00166064 Jy ! Component: 600 - total flux cleaned = -0.00177237 Jy ! Component: 650 - total flux cleaned = -0.00166273 Jy ! Component: 700 - total flux cleaned = -0.00166392 Jy ! Component: 750 - total flux cleaned = -0.00166298 Jy ! Component: 800 - total flux cleaned = -0.00186743 Jy ! Component: 850 - total flux cleaned = -0.00186766 Jy ! Component: 900 - total flux cleaned = -0.00211578 Jy ! Component: 950 - total flux cleaned = -0.00216413 Jy ! Component: 1000 - total flux cleaned = -0.00245438 Jy ! Component: 1050 - total flux cleaned = -0.00250218 Jy ! Component: 1100 - total flux cleaned = -0.0026434 Jy ! Component: 1150 - total flux cleaned = -0.00269057 Jy ! Component: 1200 - total flux cleaned = -0.00278272 Jy ! Component: 1250 - total flux cleaned = -0.00291903 Jy ! Component: 1300 - total flux cleaned = -0.00318837 Jy ! Component: 1350 - total flux cleaned = -0.00314344 Jy ! Component: 1400 - total flux cleaned = -0.00340814 Jy ! Component: 1450 - total flux cleaned = -0.0034959 Jy ! Component: 1500 - total flux cleaned = -0.0037552 Jy ! Component: 1550 - total flux cleaned = -0.00388403 Jy ! Component: 1600 - total flux cleaned = -0.00409583 Jy ! Component: 1650 - total flux cleaned = -0.00434784 Jy ! Component: 1700 - total flux cleaned = -0.00434733 Jy ! Component: 1750 - total flux cleaned = -0.00438871 Jy ! Component: 1800 - total flux cleaned = -0.00467522 Jy ! Component: 1850 - total flux cleaned = -0.00483687 Jy ! Component: 1900 - total flux cleaned = -0.00487676 Jy ! Component: 1950 - total flux cleaned = -0.0050763 Jy ! Component: 2000 - total flux cleaned = -0.00507655 Jy ! Component: 2050 - total flux cleaned = -0.00542981 Jy ! Component: 2100 - total flux cleaned = -0.00554665 Jy ! Component: 2150 - total flux cleaned = -0.00573952 Jy ! Component: 2200 - total flux cleaned = -0.00573923 Jy ! Component: 2250 - total flux cleaned = -0.00589193 Jy ! Component: 2300 - total flux cleaned = -0.00604289 Jy ! Component: 2350 - total flux cleaned = -0.00604293 Jy ! Component: 2400 - total flux cleaned = -0.00615463 Jy ! Component: 2450 - total flux cleaned = -0.00611739 Jy ! Component: 2500 - total flux cleaned = -0.00622738 Jy ! Component: 2550 - total flux cleaned = -0.00630053 Jy ! Component: 2600 - total flux cleaned = -0.00637287 Jy ! Component: 2650 - total flux cleaned = -0.00644459 Jy ! Component: 2700 - total flux cleaned = -0.00644436 Jy ! Component: 2750 - total flux cleaned = -0.00651509 Jy ! Component: 2800 - total flux cleaned = -0.00655061 Jy ! Component: 2850 - total flux cleaned = -0.00665552 Jy ! Component: 2900 - total flux cleaned = -0.00648136 Jy ! Component: 2950 - total flux cleaned = -0.00668971 Jy ! Component: 3000 - total flux cleaned = -0.00672385 Jy ! Component: 3050 - total flux cleaned = -0.00665483 Jy ! Component: 3100 - total flux cleaned = -0.00672277 Jy ! Component: 3150 - total flux cleaned = -0.00675652 Jy ! Component: 3200 - total flux cleaned = -0.00668927 Jy ! Component: 3250 - total flux cleaned = -0.00682309 Jy ! Component: 3300 - total flux cleaned = -0.0068894 Jy ! Component: 3350 - total flux cleaned = -0.00688937 Jy ! Component: 3400 - total flux cleaned = -0.006955 Jy ! Component: 3450 - total flux cleaned = -0.00702021 Jy ! Component: 3500 - total flux cleaned = -0.00705251 Jy ! Component: 3550 - total flux cleaned = -0.00705254 Jy ! Component: 3600 - total flux cleaned = -0.00714943 Jy ! Component: 3650 - total flux cleaned = -0.00724587 Jy ! Component: 3700 - total flux cleaned = -0.00724586 Jy ! Component: 3750 - total flux cleaned = -0.00727772 Jy ! Component: 3800 - total flux cleaned = -0.0073094 Jy ! Component: 3850 - total flux cleaned = -0.00743552 Jy ! Component: 3900 - total flux cleaned = -0.00740407 Jy ! Component: 3950 - total flux cleaned = -0.00743525 Jy ! Component: 4000 - total flux cleaned = -0.00755959 Jy ! Component: 4050 - total flux cleaned = -0.00746674 Jy ! Total flux subtracted in 4096 components = -0.00746688 Jy ! Clean residual min=-0.001606 max=0.002519 Jy/beam ! Clean residual mean=-0.000014 rms=0.000614 Jy/beam ! Combined flux in latest and established models = 0.344519 Jy keep ! Adding 313 model components to the UV plane model. ! The established model now contains 371 components and 0.344519 Jy ![Exited script file: muppet] wmap "J0825-3218_S_2017_04_28_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.238 x 8.412 at -5.12 degrees (North through East) ! Clean map min=-0.0042257 max=0.29618 Jy/beam ! Writing clean map to FITS file: J0825-3218_S_2017_04_28_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.296183 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.00060831 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.616148 0.616148 1.2323 2.46459 4.92919 9.85838 19.7168 39.4335 78.867 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0018 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.296 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.238 x 8.412 at -5.12 degrees (North through East) ! Clean map min=-0.0042257 max=0.29618 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J0825-3218_S_2017_04_28_pus_uvs.log closed on Thu May 2 16:21:00 2019