! Started logfile: J0825+0309_S_2017_05_27_pus_uvs.log on Fri May 3 11:01:49 2019 obs J0825+0309_S_2017_05_27_pus_uva.fits ! Reading UV FITS file: J0825+0309_S_2017_05_27_pus_uva.fits ! AN table 1: 7 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.644444 visibilities/baseline/integration-bin. ! Found source: J0825+0309 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 1211 lines of history. ! ! Reading 812 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J0825+0309_S_2017_05_27_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 14 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 20 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 14 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 51 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.617944Jy sigma=0.003601 ! Fit after self-cal, rms=0.610141Jy sigma=0.003530 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=5.329 mas, bmaj=12.23 mas, bpa=26.24 degrees ! Estimated noise=4995.62 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 1.15004 Jy ! Component: 100 - total flux cleaned = 1.40541 Jy ! Total flux subtracted in 100 components = 1.40541 Jy ! Clean residual min=-0.087838 max=0.089487 Jy/beam ! Clean residual mean=0.000015 rms=0.023737 Jy/beam ! Combined flux in latest and established models = 1.40541 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 9 components and 1.40541 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.354686Jy sigma=0.001648 ! Fit after self-cal, rms=0.354686Jy sigma=0.001648 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=5.956 mas, bmaj=12.9 mas, bpa=26.13 degrees ! Estimated noise=4086.62 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000947369 Jy ! Component: 100 - total flux cleaned = -0.00961135 Jy ! Component: 150 - total flux cleaned = -0.0160927 Jy ! Component: 200 - total flux cleaned = -0.0231656 Jy ! Total flux subtracted in 200 components = -0.0231656 Jy ! Clean residual min=-0.072771 max=0.074440 Jy/beam ! Clean residual mean=-0.000214 rms=0.016779 Jy/beam ! Combined flux in latest and established models = 1.38224 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 15 components and 1.38224 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.292315Jy sigma=0.001480 ! Fit after self-cal, rms=0.292302Jy sigma=0.001480 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.84 FD 1.07 HN 1.03 KP 0.98 ! LA 0.96 MK 1.00* NL 0.87 OV 1.05 ! PT 1.04 SC 0.99 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.12 HN 1.07 KP 0.95 ! LA 0.94 MK 1.00* NL 1.00 OV 1.00 ! PT 1.00 SC 1.05 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.66 FD 1.09 HN 1.06 KP 0.99 ! LA 0.97 MK 1.00* NL 1.00 OV 0.99 ! PT 1.00 SC 1.04 ! ! ! Correcting IF 4. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.19 HN 1.04 KP 1.00* ! LA 0.98 MK 1.00* NL 1.00* OV 1.00* ! PT 1.05 SC 1.00* ! ! ! Fit before self-cal, rms=0.292302Jy sigma=0.001480 ! Fit after self-cal, rms=0.120579Jy sigma=0.000790 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=5.874 mas, bmaj=12.98 mas, bpa=26.55 degrees ! Estimated noise=4041.18 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00732014 Jy ! Component: 100 - total flux cleaned = 0.010592 Jy ! Component: 150 - total flux cleaned = 0.0108528 Jy ! Component: 200 - total flux cleaned = 0.0110896 Jy ! Total flux subtracted in 200 components = 0.0110896 Jy ! Clean residual min=-0.015183 max=0.020517 Jy/beam ! Clean residual mean=-0.000053 rms=0.004648 Jy/beam ! Combined flux in latest and established models = 1.39333 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 28 components and 1.39333 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.118830Jy sigma=0.000778 ! Fit after self-cal, rms=0.118595Jy sigma=0.000778 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.118595Jy sigma=0.000778 ! Fit after self-cal, rms=0.118138Jy sigma=0.000776 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=5.866 mas, bmaj=12.99 mas, bpa=26.56 degrees ! Estimated noise=4050.32 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00907663 Jy ! Component: 100 - total flux cleaned = 0.0112062 Jy ! Component: 150 - total flux cleaned = 0.0117639 Jy ! Component: 200 - total flux cleaned = 0.0119233 Jy ! Total flux subtracted in 200 components = 0.0119233 Jy ! Clean residual min=-0.013817 max=0.018670 Jy/beam ! Clean residual mean=-0.000047 rms=0.004323 Jy/beam ! Combined flux in latest and established models = 1.40526 Jy selfcal ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 36 components and 1.40526 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.117168Jy sigma=0.000769 ! Fit after self-cal, rms=0.117129Jy sigma=0.000769 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-32.5, 42.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0129 Jy ! Component: 100 - total flux cleaned = 0.0116619 Jy ! Component: 150 - total flux cleaned = 0.0097145 Jy ! Component: 200 - total flux cleaned = 0.00824914 Jy ! Total flux subtracted in 200 components = 0.00824914 Jy ! Clean residual min=-0.011830 max=0.012034 Jy/beam ! Clean residual mean=-0.000007 rms=0.003324 Jy/beam ! Combined flux in latest and established models = 1.41351 Jy ! Performing phase self-cal ! Adding 31 model components to the UV plane model. ! The established model now contains 67 components and 1.41351 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.114588Jy sigma=0.000749 ! Fit after self-cal, rms=0.114541Jy sigma=0.000749 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.114541Jy sigma=0.000749 ! Fit after self-cal, rms=0.113982Jy sigma=0.000746 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=5.861 mas, bmaj=12.99 mas, bpa=26.58 degrees ! Estimated noise=4052.7 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00625958 Jy ! Component: 100 - total flux cleaned = 0.0073896 Jy ! Component: 150 - total flux cleaned = 0.00739401 Jy ! Component: 200 - total flux cleaned = 0.00791382 Jy ! Total flux subtracted in 200 components = 0.00791382 Jy ! Clean residual min=-0.010025 max=0.010920 Jy/beam ! Clean residual mean=-0.000038 rms=0.002896 Jy/beam ! Combined flux in latest and established models = 1.42142 Jy selfcal ! Performing phase self-cal ! Adding 30 model components to the UV plane model. ! The established model now contains 91 components and 1.42142 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.113132Jy sigma=0.000740 ! Fit after self-cal, rms=0.113121Jy sigma=0.000740 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0008772 Jy ! Component: 100 - total flux cleaned = 0.00103201 Jy ! Component: 150 - total flux cleaned = 0.00117917 Jy ! Component: 200 - total flux cleaned = 0.00117741 Jy ! Total flux subtracted in 200 components = 0.00117741 Jy ! Clean residual min=-0.009690 max=0.010444 Jy/beam ! Clean residual mean=-0.000033 rms=0.002760 Jy/beam ! Combined flux in latest and established models = 1.4226 Jy ! Performing phase self-cal ! Adding 33 model components to the UV plane model. ! The established model now contains 103 components and 1.4226 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.112719Jy sigma=0.000738 ! Fit after self-cal, rms=0.112717Jy sigma=0.000738 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.112717Jy sigma=0.000738 ! Fit after self-cal, rms=0.112698Jy sigma=0.000737 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=9.271 mas, bmaj=13.69 mas, bpa=16.53 degrees ! Estimated noise=4173.9 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00332984 Jy ! Component: 100 - total flux cleaned = 0.00451803 Jy ! Component: 150 - total flux cleaned = 0.00504048 Jy ! Component: 200 - total flux cleaned = 0.00539492 Jy ! Total flux subtracted in 200 components = 0.00539492 Jy ! Clean residual min=-0.008646 max=0.009145 Jy/beam ! Clean residual mean=-0.000069 rms=0.002460 Jy/beam ! Combined flux in latest and established models = 1.42799 Jy selfcal ! Performing phase self-cal ! Adding 41 model components to the UV plane model. ! The established model now contains 140 components and 1.42799 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.112399Jy sigma=0.000735 ! Fit after self-cal, rms=0.112404Jy sigma=0.000735 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000792645 Jy ! Component: 100 - total flux cleaned = 0.000896327 Jy ! Component: 150 - total flux cleaned = 0.000900088 Jy ! Component: 200 - total flux cleaned = 0.00108436 Jy ! Total flux subtracted in 200 components = 0.00108436 Jy ! Clean residual min=-0.008261 max=0.008809 Jy/beam ! Clean residual mean=-0.000064 rms=0.002357 Jy/beam ! Combined flux in latest and established models = 1.42908 Jy ! Performing phase self-cal ! Adding 36 model components to the UV plane model. ! The established model now contains 162 components and 1.42908 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.112257Jy sigma=0.000734 ! Fit after self-cal, rms=0.112257Jy sigma=0.000734 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=5.861 mas, bmaj=12.99 mas, bpa=26.59 degrees ! Estimated noise=4058.23 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 5.861 x 12.99 at 26.59 degrees (North through East) ! Clean map min=-0.046455 max=1.4827 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.112257Jy sigma=0.000734 ! Fit after self-cal, rms=0.094722Jy sigma=0.000618 ! Inverting map and beam ! Estimated beam: bmin=5.862 mas, bmaj=12.99 mas, bpa=26.59 degrees ! Estimated noise=4062.54 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00398841 Jy ! Component: 100 - total flux cleaned = 0.00399285 Jy ! Component: 150 - total flux cleaned = 0.00386672 Jy ! Component: 200 - total flux cleaned = 0.00374489 Jy ! Total flux subtracted in 200 components = 0.00374489 Jy ! Clean residual min=-0.008109 max=0.009335 Jy/beam ! Clean residual mean=-0.000038 rms=0.002398 Jy/beam ! Combined flux in latest and established models = 1.43282 Jy ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 176 components and 1.43282 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.094225Jy sigma=0.000616 ! Fit after self-cal, rms=0.094212Jy sigma=0.000616 ! Inverting map ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00014066 Jy ! Component: 100 - total flux cleaned = 0.000138215 Jy ! Component: 150 - total flux cleaned = -7.95131e-05 Jy ! Component: 200 - total flux cleaned = -8.157e-05 Jy ! Total flux subtracted in 200 components = -8.157e-05 Jy ! Clean residual min=-0.007922 max=0.009395 Jy/beam ! Clean residual mean=-0.000039 rms=0.002338 Jy/beam ! Combined flux in latest and established models = 1.43274 Jy ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 186 components and 1.43274 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.093917Jy sigma=0.000614 ! Fit after self-cal, rms=0.093909Jy sigma=0.000614 ! Inverting map ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.093909Jy sigma=0.000614 ! Fit after self-cal, rms=0.093941Jy sigma=0.000614 print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=5.22 mas, bmaj=12.47 mas, bpa=26.87 degrees ! Estimated noise=4940.48 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 1.13658 Jy ! Component: 100 - total flux cleaned = 1.38462 Jy ! Component: 150 - total flux cleaned = 1.45002 Jy ! Component: 200 - total flux cleaned = 1.45169 Jy ! Total flux subtracted in 200 components = 1.45169 Jy ! Clean residual min=-0.022213 max=0.022583 Jy/beam ! Clean residual mean=0.000021 rms=0.006269 Jy/beam ! Combined flux in latest and established models = 1.45169 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 20 model components to the UV plane model. ! The established model now contains 20 components and 1.45169 Jy ! Inverting map and beam ! Estimated beam: bmin=5.862 mas, bmaj=12.99 mas, bpa=26.59 degrees ! Estimated noise=4065.98 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000162343 Jy ! Component: 100 - total flux cleaned = 0.00209382 Jy ! Component: 150 - total flux cleaned = 0.00208286 Jy ! Component: 200 - total flux cleaned = 0.00159438 Jy ! Total flux subtracted in 200 components = 0.00159438 Jy ! Clean residual min=-0.012402 max=0.014429 Jy/beam ! Clean residual mean=0.000017 rms=0.003797 Jy/beam ! Combined flux in latest and established models = 1.45328 Jy ! Adding 32 model components to the UV plane model. ! The established model now contains 47 components and 1.45328 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=9.27 mas, bmaj=13.69 mas, bpa=16.51 degrees ! Estimated noise=4181.68 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.0016123 Jy ! Component: 100 - total flux cleaned = -0.00350582 Jy ! Component: 150 - total flux cleaned = -0.00446517 Jy ! Component: 200 - total flux cleaned = -0.00503268 Jy ! Total flux subtracted in 200 components = -0.00503268 Jy ! Clean residual min=-0.009007 max=0.009886 Jy/beam ! Clean residual mean=0.000004 rms=0.002893 Jy/beam ! Combined flux in latest and established models = 1.44825 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000789316 Jy ! Component: 100 - total flux cleaned = -0.00150637 Jy ! Component: 150 - total flux cleaned = -0.00216393 Jy ! Component: 200 - total flux cleaned = -0.00256749 Jy ! Total flux subtracted in 200 components = -0.00256749 Jy ! Clean residual min=-0.008513 max=0.008608 Jy/beam ! Clean residual mean=-0.000006 rms=0.002540 Jy/beam ! Combined flux in latest and established models = 1.44568 Jy ! Adding 60 model components to the UV plane model. ! The established model now contains 100 components and 1.44568 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=5.862 mas, bmaj=12.99 mas, bpa=26.59 degrees ! Estimated noise=4065.98 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000332398 Jy ! Component: 100 - total flux cleaned = -0.00144426 Jy ! Component: 150 - total flux cleaned = -0.00183684 Jy ! Component: 200 - total flux cleaned = -0.00239847 Jy ! Total flux subtracted in 200 components = -0.00239847 Jy ! Clean residual min=-0.008711 max=0.010073 Jy/beam ! Clean residual mean=-0.000009 rms=0.002597 Jy/beam ! Combined flux in latest and established models = 1.44328 Jy selfcal ! Performing phase self-cal ! Adding 32 model components to the UV plane model. ! The established model now contains 131 components and 1.44328 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.095019Jy sigma=0.000621 ! Fit after self-cal, rms=0.094883Jy sigma=0.000620 wmodel J0825+0309_S_2017_05_27_pus_map.mod ! Writing 131 model components to file: J0825+0309_S_2017_05_27_pus_map.mod wobs J0825+0309_S_2017_05_27_pus_uvs.fits ! Writing UV FITS file: J0825+0309_S_2017_05_27_pus_uvs.fits wwins J0825+0309_S_2017_05_27_pus_map.win ! wwins: Wrote 2 windows to J0825+0309_S_2017_05_27_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.00202102 Jy ! Component: 100 - total flux cleaned = 0.00155844 Jy ! Component: 150 - total flux cleaned = 0.000994745 Jy ! Component: 200 - total flux cleaned = -0.000219703 Jy ! Component: 250 - total flux cleaned = -0.00137559 Jy ! Component: 300 - total flux cleaned = -0.00247985 Jy ! Component: 350 - total flux cleaned = -0.00388407 Jy ! Component: 400 - total flux cleaned = -0.00545566 Jy ! Component: 450 - total flux cleaned = -0.00696803 Jy ! Component: 500 - total flux cleaned = -0.00822223 Jy ! Component: 550 - total flux cleaned = -0.00943679 Jy ! Component: 600 - total flux cleaned = -0.0103213 Jy ! Component: 650 - total flux cleaned = -0.0109906 Jy ! Component: 700 - total flux cleaned = -0.0116431 Jy ! Component: 750 - total flux cleaned = -0.0120942 Jy ! Component: 800 - total flux cleaned = -0.0122725 Jy ! Component: 850 - total flux cleaned = -0.0127909 Jy ! Component: 900 - total flux cleaned = -0.0128739 Jy ! Component: 950 - total flux cleaned = -0.0131227 Jy ! Component: 1000 - total flux cleaned = -0.0132858 Jy ! Component: 1050 - total flux cleaned = -0.0136047 Jy ! Component: 1100 - total flux cleaned = -0.0142267 Jy ! Component: 1150 - total flux cleaned = -0.0144539 Jy ! Component: 1200 - total flux cleaned = -0.0148291 Jy ! Component: 1250 - total flux cleaned = -0.0151254 Jy ! Component: 1300 - total flux cleaned = -0.0154894 Jy ! Component: 1350 - total flux cleaned = -0.0157046 Jy ! Component: 1400 - total flux cleaned = -0.0161274 Jy ! Component: 1450 - total flux cleaned = -0.0164054 Jy ! Component: 1500 - total flux cleaned = -0.0165412 Jy ! Component: 1550 - total flux cleaned = -0.0166082 Jy ! Component: 1600 - total flux cleaned = -0.0166074 Jy ! Component: 1650 - total flux cleaned = -0.0167397 Jy ! Component: 1700 - total flux cleaned = -0.0169334 Jy ! Component: 1750 - total flux cleaned = -0.0169968 Jy ! Component: 1800 - total flux cleaned = -0.0169969 Jy ! Component: 1850 - total flux cleaned = -0.0171229 Jy ! Component: 1900 - total flux cleaned = -0.0171852 Jy ! Component: 1950 - total flux cleaned = -0.0171243 Jy ! Component: 2000 - total flux cleaned = -0.0173068 Jy ! Component: 2050 - total flux cleaned = -0.0172475 Jy ! Component: 2100 - total flux cleaned = -0.0173076 Jy ! Component: 2150 - total flux cleaned = -0.0173665 Jy ! Component: 2200 - total flux cleaned = -0.0171912 Jy ! Component: 2250 - total flux cleaned = -0.0171912 Jy ! Component: 2300 - total flux cleaned = -0.0171341 Jy ! Component: 2350 - total flux cleaned = -0.0170205 Jy ! Component: 2400 - total flux cleaned = -0.0170206 Jy ! Component: 2450 - total flux cleaned = -0.0170204 Jy ! Component: 2500 - total flux cleaned = -0.0169092 Jy ! Component: 2550 - total flux cleaned = -0.0167989 Jy ! Component: 2600 - total flux cleaned = -0.016854 Jy ! Component: 2650 - total flux cleaned = -0.0169085 Jy ! Component: 2700 - total flux cleaned = -0.0169084 Jy ! Component: 2750 - total flux cleaned = -0.0170156 Jy ! Component: 2800 - total flux cleaned = -0.0168552 Jy ! Component: 2850 - total flux cleaned = -0.0170149 Jy ! Component: 2900 - total flux cleaned = -0.0170146 Jy ! Component: 2950 - total flux cleaned = -0.0170147 Jy ! Component: 3000 - total flux cleaned = -0.0170674 Jy ! Component: 3050 - total flux cleaned = -0.0170677 Jy ! Component: 3100 - total flux cleaned = -0.017016 Jy ! Component: 3150 - total flux cleaned = -0.0170161 Jy ! Component: 3200 - total flux cleaned = -0.0170676 Jy ! Component: 3250 - total flux cleaned = -0.0169138 Jy ! Component: 3300 - total flux cleaned = -0.0169137 Jy ! Component: 3350 - total flux cleaned = -0.0168629 Jy ! Component: 3400 - total flux cleaned = -0.0166079 Jy ! Component: 3450 - total flux cleaned = -0.0165566 Jy ! Component: 3500 - total flux cleaned = -0.0164042 Jy ! Component: 3550 - total flux cleaned = -0.016252 Jy ! Component: 3600 - total flux cleaned = -0.0160492 Jy ! Component: 3650 - total flux cleaned = -0.0160494 Jy ! Component: 3700 - total flux cleaned = -0.0159987 Jy ! Component: 3750 - total flux cleaned = -0.0157961 Jy ! Component: 3800 - total flux cleaned = -0.0156444 Jy ! Component: 3850 - total flux cleaned = -0.0155936 Jy ! Component: 3900 - total flux cleaned = -0.0155937 Jy ! Component: 3950 - total flux cleaned = -0.0153917 Jy ! Component: 4000 - total flux cleaned = -0.015341 Jy ! Component: 4050 - total flux cleaned = -0.0151389 Jy ! Total flux subtracted in 4096 components = -0.0150381 Jy ! Clean residual min=-0.002720 max=0.002941 Jy/beam ! Clean residual mean=0.000036 rms=0.000835 Jy/beam ! Combined flux in latest and established models = 1.42825 Jy keep ! Adding 237 model components to the UV plane model. ! The established model now contains 368 components and 1.42824 Jy ![Exited script file: muppet] wmap "J0825+0309_S_2017_05_27_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 5.862 x 12.99 at 26.59 degrees (North through East) ! Clean map min=-0.033247 max=1.4664 Jy/beam ! Writing clean map to FITS file: J0825+0309_S_2017_05_27_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 1.46642 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000796506 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.16295 0.16295 0.325899 0.651798 1.3036 2.60719 5.21438 10.4288 20.8575 41.7151 83.4301 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0023 print "peak=",int(1000*peak_flux)/1000 ! peak= 1.466 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 5.862 x 12.99 at 26.59 degrees (North through East) ! Clean map min=-0.033247 max=1.4664 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J0825+0309_S_2017_05_27_pus_uvs.log closed on Fri May 3 11:01:54 2019