! Started logfile: J0824-2428_X_2017_04_28_pus_uvs.log on Mon Apr 29 14:26:26 2019
obs J0824-2428_X_2017_04_28_pus_uva.fits
! Reading UV FITS file: J0824-2428_X_2017_04_28_pus_uva.fits
! AN table 1: 76 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.966667 visibilities/baseline/integration-bin.
! Found source: J0824-2428
! 
! There are 12 IFs, and a total of 12 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1  8.44388e+09      3.2e+07          1      3.2e+07
!  02        2  8.47588e+09      3.2e+07          1      3.2e+07
!  03        3  8.50788e+09      3.2e+07          1      3.2e+07
!  04        4  8.53988e+09      3.2e+07          1      3.2e+07
!  05        5  8.60388e+09      3.2e+07          1      3.2e+07
!  06        6  8.63588e+09      3.2e+07          1      3.2e+07
!  07        7  8.69988e+09      3.2e+07          1      3.2e+07
!  08        8  8.73188e+09      3.2e+07          1      3.2e+07
!  09        9  8.79588e+09      3.2e+07          1      3.2e+07
!  10       10  8.82788e+09      3.2e+07          1      3.2e+07
!  11       11  8.85988e+09      3.2e+07          1      3.2e+07
!  12       12  8.89188e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 907 lines of history.
! 
! Reading 39672 visibilities.
select I
! Polarization I is unavailable.
! Selecting polarization: RR,  channels: 1..12
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: 5..5
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
! Reading IF 9 channels: 9..9
! Reading IF 10 channels: 10..10
! Reading IF 11 channels: 11..11
! Reading IF 12 channels: 12..12
print "field_size =",field_size
! field_size = 512 
print "field_cell =",field_cell
! field_cell = 0.2 
print "taper_size =",taper_size
! taper_size = 70 
![@muppet J0824-2428_X_2017_04_28_pus]
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 512x512 pixels with 0.200x0.200 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 14 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 14 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 14 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 26 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 5.
!  A total of 14 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 6.
!  A total of 26 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 7.
!  A total of 26 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 8.
!  A total of 26 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 9.
!  A total of 26 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 10.
!  A total of 39 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 11.
!  A total of 26 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 12.
!  A total of 49 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=0.927389Jy  sigma=0.006126
! Fit after  self-cal, rms=0.893779Jy  sigma=0.005983
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.6489 mas, bmaj=1.72 mas, bpa=-6.804 degrees
! Estimated noise=958.984 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0830629 Jy
! Component: 100  -  total flux cleaned = 0.107287 Jy
! Total flux subtracted in 100 components = 0.107287 Jy
! Clean residual min=-0.004964 max=0.010698 Jy/beam
! Clean residual mean=-0.000045 rms=0.001602 Jy/beam
! Combined flux in latest and established models = 0.107287 Jy
! Performing phase self-cal
! Adding 10 model components to the UV plane model.
! The established model now contains 10 components and 0.107287 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.128028Jy  sigma=0.000682
! Fit after  self-cal, rms=0.128018Jy  sigma=0.000681
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0126562 Jy
! Component: 100  -  total flux cleaned = 0.0206817 Jy
! Total flux subtracted in 100 components = 0.0206817 Jy
! Clean residual min=-0.003513 max=0.006565 Jy/beam
! Clean residual mean=-0.000021 rms=0.001066 Jy/beam
! Combined flux in latest and established models = 0.127969 Jy
! Performing phase self-cal
! Adding 16 model components to the UV plane model.
! The established model now contains 22 components and 0.127969 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.126233Jy  sigma=0.000662
! Fit after  self-cal, rms=0.126254Jy  sigma=0.000662
! Inverting map 
! Added new window around map position (1.2, 1.2).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00668034 Jy
! Component: 100  -  total flux cleaned = 0.0110399 Jy
! Total flux subtracted in 100 components = 0.0110399 Jy
! Clean residual min=-0.002849 max=0.004842 Jy/beam
! Clean residual mean=-0.000011 rms=0.000858 Jy/beam
! Combined flux in latest and established models = 0.139009 Jy
! Performing phase self-cal
! Adding 16 model components to the UV plane model.
! The established model now contains 32 components and 0.139009 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.125804Jy  sigma=0.000656
! Fit after  self-cal, rms=0.125808Jy  sigma=0.000656
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.8186 mas, bmaj=2.074 mas, bpa=-5.627 degrees
! Estimated noise=560.181 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (-1, -1).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00641213 Jy
! Component: 100  -  total flux cleaned = 0.0101845 Jy
! Component: 150  -  total flux cleaned = 0.0127397 Jy
! Component: 200  -  total flux cleaned = 0.0138619 Jy
! Total flux subtracted in 200 components = 0.0138619 Jy
! Clean residual min=-0.001914 max=0.002501 Jy/beam
! Clean residual mean=0.000004 rms=0.000607 Jy/beam
! Combined flux in latest and established models = 0.152871 Jy
! Performing phase self-cal
! Adding 35 model components to the UV plane model.
! The established model now contains 63 components and 0.152871 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.125555Jy  sigma=0.000652
! Fit after  self-cal, rms=0.125580Jy  sigma=0.000652
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.98     FD        0.97     HN        0.98     KP        1.00     
!   LA        0.91     MK        0.99     NL        0.95     OV        1.08     
!   PT        1.05     SC        1.03     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.96     FD        1.00     HN        1.45     KP        1.00     
!   LA        0.95     MK        1.03     NL        1.02     OV        0.99     
!   PT        1.05     SC        0.97     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        0.99     HN        1.36     KP        0.91     
!   LA        0.99     MK        0.96     NL        1.00     OV        1.06     
!   PT        1.09     SC        1.07     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.98     FD        0.89     HN        0.95     KP        0.94     
!   LA        0.99     MK        1.04     NL        1.02     OV        1.02     
!   PT        1.11     SC        1.03     
! 
! 
! Correcting IF 5.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.92     FD        0.95     HN        1.00     KP        0.99     
!   LA        1.00     MK        1.08     NL        0.97     OV        0.99     
!   PT        1.17     SC        1.03     
! 
! 
! Correcting IF 6.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.91     FD        0.96     HN        0.96     KP        0.99     
!   LA        0.97     MK        1.05     NL        1.01     OV        0.98     
!   PT        1.08     SC        0.98     
! 
! 
! Correcting IF 7.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        0.96     HN        0.97     KP        0.97     
!   LA        0.98     MK        1.04     NL        1.05     OV        1.01     
!   PT        1.15     SC        1.05     
! 
! 
! Correcting IF 8.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.92     FD        0.99     HN        1.14     KP        0.97     
!   LA        0.96     MK        1.01     NL        1.02     OV        1.02     
!   PT        1.03     SC        1.00     
! 
! 
! Correcting IF 9.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.95     FD        0.97     HN        0.96     KP        0.95     
!   LA        0.98     MK        0.99     NL        0.97     OV        1.02     
!   PT        1.13     SC        0.99     
! 
! 
! Correcting IF 10.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.93     FD        0.95     HN        0.98     KP        0.99     
!   LA        1.01     MK        0.98     NL        1.01     OV        1.02     
!   PT        1.02     SC        1.06     
! 
! 
! Correcting IF 11.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.98     FD        0.95     HN        1.01     KP        0.96     
!   LA        0.97     MK        0.95     NL        1.09     OV        1.07     
!   PT        1.05     SC        0.94     
! 
! 
! Correcting IF 12.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        0.95     HN        0.92     KP        1.00     
!   LA        0.99     MK        0.92     NL        1.02     OV        0.99     
!   PT        1.11     SC        0.98     
! 
! 
! Fit before self-cal, rms=0.125580Jy  sigma=0.000652
! Fit after  self-cal, rms=0.130914Jy  sigma=0.000649
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.8239 mas, bmaj=2.079 mas, bpa=-5.575 degrees
! Estimated noise=557.077 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000185778 Jy
! Component: 100  -  total flux cleaned = -0.000158653 Jy
! Component: 150  -  total flux cleaned = -0.000182098 Jy
! Component: 200  -  total flux cleaned = -0.000160918 Jy
! Total flux subtracted in 200 components = -0.000160918 Jy
! Clean residual min=-0.001658 max=0.001757 Jy/beam
! Clean residual mean=-0.000000 rms=0.000403 Jy/beam
! Combined flux in latest and established models = 0.15271 Jy
! Performing phase self-cal
! Adding 19 model components to the UV plane model.
! The established model now contains 77 components and 0.15271 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.130901Jy  sigma=0.000649
! Fit after  self-cal, rms=0.131009Jy  sigma=0.000649
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.131009Jy  sigma=0.000649
! Fit after  self-cal, rms=0.135061Jy  sigma=0.000648
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.8233 mas, bmaj=2.077 mas, bpa=-5.645 degrees
! Estimated noise=556.937 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000180753 Jy
! Component: 100  -  total flux cleaned = -0.000115599 Jy
! Component: 150  -  total flux cleaned = -7.7403e-05 Jy
! Component: 200  -  total flux cleaned = -9.43318e-05 Jy
! Total flux subtracted in 200 components = -9.43318e-05 Jy
! Clean residual min=-0.001407 max=0.001444 Jy/beam
! Clean residual mean=0.000002 rms=0.000344 Jy/beam
! Combined flux in latest and established models = 0.152616 Jy
selfcal
! Performing phase self-cal
! Adding 17 model components to the UV plane model.
! The established model now contains 83 components and 0.152616 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.135054Jy  sigma=0.000648
! Fit after  self-cal, rms=0.135099Jy  sigma=0.000648
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -3.73939e-05 Jy
! Component: 100  -  total flux cleaned = -5.45098e-06 Jy
! Component: 150  -  total flux cleaned = -2.04897e-05 Jy
! Component: 200  -  total flux cleaned = -3.45182e-05 Jy
! Total flux subtracted in 200 components = -3.45182e-05 Jy
! Clean residual min=-0.001403 max=0.001461 Jy/beam
! Clean residual mean=0.000002 rms=0.000341 Jy/beam
! Combined flux in latest and established models = 0.152581 Jy
! Performing phase self-cal
! Adding 22 model components to the UV plane model.
! The established model now contains 89 components and 0.152581 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.135096Jy  sigma=0.000648
! Fit after  self-cal, rms=0.135095Jy  sigma=0.000648
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.135095Jy  sigma=0.000648
! Fit after  self-cal, rms=0.138692Jy  sigma=0.000648
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.8224 mas, bmaj=2.078 mas, bpa=-5.704 degrees
! Estimated noise=555.481 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 6.128e-05 Jy
! Component: 100  -  total flux cleaned = 6.06372e-05 Jy
! Component: 150  -  total flux cleaned = 4.67609e-05 Jy
! Component: 200  -  total flux cleaned = 5.86824e-05 Jy
! Total flux subtracted in 200 components = 5.86824e-05 Jy
! Clean residual min=-0.001205 max=0.001314 Jy/beam
! Clean residual mean=0.000005 rms=0.000320 Jy/beam
! Combined flux in latest and established models = 0.15264 Jy
selfcal
! Performing phase self-cal
! Adding 22 model components to the UV plane model.
! The established model now contains 94 components and 0.15264 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.138688Jy  sigma=0.000647
! Fit after  self-cal, rms=0.138720Jy  sigma=0.000647
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 2.28654e-05 Jy
! Component: 100  -  total flux cleaned = 3.50039e-05 Jy
! Component: 150  -  total flux cleaned = 4.57805e-05 Jy
! Component: 200  -  total flux cleaned = 4.57849e-05 Jy
! Total flux subtracted in 200 components = 4.57849e-05 Jy
! Clean residual min=-0.001200 max=0.001321 Jy/beam
! Clean residual mean=0.000004 rms=0.000317 Jy/beam
! Combined flux in latest and established models = 0.152686 Jy
! Performing phase self-cal
! Adding 22 model components to the UV plane model.
! The established model now contains 98 components and 0.152686 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.138717Jy  sigma=0.000647
! Fit after  self-cal, rms=0.138718Jy  sigma=0.000647
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.138718Jy  sigma=0.000647
! Fit after  self-cal, rms=0.138798Jy  sigma=0.000647
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.203 mas, bmaj=4.852 mas, bpa=-2.996 degrees
! Estimated noise=724.849 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000248446 Jy
! Component: 100  -  total flux cleaned = 0.000312738 Jy
! Component: 150  -  total flux cleaned = 0.000373138 Jy
! Component: 200  -  total flux cleaned = 0.000416159 Jy
! Total flux subtracted in 200 components = 0.000416159 Jy
! Clean residual min=-0.001213 max=0.001202 Jy/beam
! Clean residual mean=0.000010 rms=0.000376 Jy/beam
! Combined flux in latest and established models = 0.153102 Jy
selfcal
! Performing phase self-cal
! Adding 15 model components to the UV plane model.
! The established model now contains 107 components and 0.153102 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.138798Jy  sigma=0.000647
! Fit after  self-cal, rms=0.138801Jy  sigma=0.000647
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000102555 Jy
! Component: 100  -  total flux cleaned = 0.000133629 Jy
! Component: 150  -  total flux cleaned = 0.000140349 Jy
! Component: 200  -  total flux cleaned = 0.000152452 Jy
! Total flux subtracted in 200 components = 0.000152452 Jy
! Clean residual min=-0.001216 max=0.001196 Jy/beam
! Clean residual mean=0.000010 rms=0.000375 Jy/beam
! Combined flux in latest and established models = 0.153254 Jy
! Performing phase self-cal
! Adding 13 model components to the UV plane model.
! The established model now contains 110 components and 0.153254 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.138800Jy  sigma=0.000647
! Fit after  self-cal, rms=0.138800Jy  sigma=0.000647
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=0.8221 mas, bmaj=2.077 mas, bpa=-5.739 degrees
! Estimated noise=554.818 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.8221 x 2.077 at -5.739 degrees (North through East)
! Clean map  min=-0.0011025  max=0.10893 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.6503 mas, bmaj=1.715 mas, bpa=-6.907 degrees
! Estimated noise=946.84 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0813409 Jy
! Component: 100  -  total flux cleaned = 0.106041 Jy
! Component: 150  -  total flux cleaned = 0.11855 Jy
! Component: 200  -  total flux cleaned = 0.127059 Jy
! Total flux subtracted in 200 components = 0.127059 Jy
! Clean residual min=-0.003227 max=0.004776 Jy/beam
! Clean residual mean=-0.000023 rms=0.000914 Jy/beam
! Combined flux in latest and established models = 0.127059 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 26 model components to the UV plane model.
! The established model now contains 26 components and 0.127059 Jy
! Inverting map and beam 
! Estimated beam: bmin=0.8221 mas, bmaj=2.077 mas, bpa=-5.739 degrees
! Estimated noise=554.818 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00972997 Jy
! Component: 100  -  total flux cleaned = 0.0154409 Jy
! Component: 150  -  total flux cleaned = 0.019047 Jy
! Component: 200  -  total flux cleaned = 0.0214357 Jy
! Total flux subtracted in 200 components = 0.0214357 Jy
! Clean residual min=-0.001440 max=0.001507 Jy/beam
! Clean residual mean=-0.000002 rms=0.000387 Jy/beam
! Combined flux in latest and established models = 0.148495 Jy
! Adding 49 model components to the UV plane model.
! The established model now contains 62 components and 0.148495 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.203 mas, bmaj=4.852 mas, bpa=-2.996 degrees
! Estimated noise=724.849 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00254076 Jy
! Component: 100  -  total flux cleaned = 0.00372178 Jy
! Component: 150  -  total flux cleaned = 0.00434531 Jy
! Component: 200  -  total flux cleaned = 0.00457582 Jy
! Total flux subtracted in 200 components = 0.00457582 Jy
! Clean residual min=-0.001207 max=0.001213 Jy/beam
! Clean residual mean=0.000009 rms=0.000379 Jy/beam
! Combined flux in latest and established models = 0.15307 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 5.65963e-05 Jy
! Component: 100  -  total flux cleaned = 9.52962e-05 Jy
! Component: 150  -  total flux cleaned = 0.000136654 Jy
! Component: 200  -  total flux cleaned = 0.000158758 Jy
! Total flux subtracted in 200 components = 0.000158758 Jy
! Clean residual min=-0.001201 max=0.001190 Jy/beam
! Clean residual mean=0.000010 rms=0.000375 Jy/beam
! Combined flux in latest and established models = 0.153229 Jy
! Adding 47 model components to the UV plane model.
! The established model now contains 101 components and 0.153229 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=0.8221 mas, bmaj=2.077 mas, bpa=-5.739 degrees
! Estimated noise=554.818 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000265406 Jy
! Component: 100  -  total flux cleaned = -0.00033708 Jy
! Component: 150  -  total flux cleaned = -0.000356904 Jy
! Component: 200  -  total flux cleaned = -0.000374482 Jy
! Total flux subtracted in 200 components = -0.000374482 Jy
! Clean residual min=-0.001240 max=0.001299 Jy/beam
! Clean residual mean=0.000005 rms=0.000319 Jy/beam
! Combined flux in latest and established models = 0.152855 Jy
selfcal
! Performing phase self-cal
! Adding 16 model components to the UV plane model.
! The established model now contains 114 components and 0.152855 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.138802Jy  sigma=0.000647
! Fit after  self-cal, rms=0.138802Jy  sigma=0.000647
wmodel J0824-2428_X_2017_04_28_pus_map.mod
! Writing 114 model components to file: J0824-2428_X_2017_04_28_pus_map.mod
wobs J0824-2428_X_2017_04_28_pus_uvs.fits
! Writing UV FITS file: J0824-2428_X_2017_04_28_pus_uvs.fits
wwins J0824-2428_X_2017_04_28_pus_map.win
! wwins: Wrote 3 windows to J0824-2428_X_2017_04_28_pus_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=2048  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = 0.000310214 Jy
! Component: 100  -  total flux cleaned = 0.00041533 Jy
! Component: 150  -  total flux cleaned = 0.000553564 Jy
! Component: 200  -  total flux cleaned = 0.000609733 Jy
! Component: 250  -  total flux cleaned = 0.000664257 Jy
! Component: 300  -  total flux cleaned = 0.000699595 Jy
! Component: 350  -  total flux cleaned = 0.000768859 Jy
! Component: 400  -  total flux cleaned = 0.000836514 Jy
! Component: 450  -  total flux cleaned = 0.000919168 Jy
! Component: 500  -  total flux cleaned = 0.00103212 Jy
! Component: 550  -  total flux cleaned = 0.0011112 Jy
! Component: 600  -  total flux cleaned = 0.00118892 Jy
! Component: 650  -  total flux cleaned = 0.00123498 Jy
! Component: 700  -  total flux cleaned = 0.00133954 Jy
! Component: 750  -  total flux cleaned = 0.00139831 Jy
! Component: 800  -  total flux cleaned = 0.00147047 Jy
! Component: 850  -  total flux cleaned = 0.00152723 Jy
! Component: 900  -  total flux cleaned = 0.00161065 Jy
! Component: 950  -  total flux cleaned = 0.00159671 Jy
! Component: 1000  -  total flux cleaned = 0.00166433 Jy
! Component: 1050  -  total flux cleaned = 0.0016776 Jy
! Component: 1100  -  total flux cleaned = 0.00169065 Jy
! Component: 1150  -  total flux cleaned = 0.00172954 Jy
! Component: 1200  -  total flux cleaned = 0.00174245 Jy
! Component: 1250  -  total flux cleaned = 0.0017929 Jy
! Component: 1300  -  total flux cleaned = 0.0018056 Jy
! Component: 1350  -  total flux cleaned = 0.00185471 Jy
! Component: 1400  -  total flux cleaned = 0.0018791 Jy
! Component: 1450  -  total flux cleaned = 0.00190321 Jy
! Component: 1500  -  total flux cleaned = 0.00197461 Jy
! Component: 1550  -  total flux cleaned = 0.00200985 Jy
! Component: 1600  -  total flux cleaned = 0.00207958 Jy
! Component: 1650  -  total flux cleaned = 0.0021253 Jy
! Component: 1700  -  total flux cleaned = 0.00218206 Jy
! Component: 1750  -  total flux cleaned = 0.00220457 Jy
! Component: 1800  -  total flux cleaned = 0.00222685 Jy
! Component: 1850  -  total flux cleaned = 0.00224895 Jy
! Component: 1900  -  total flux cleaned = 0.00229247 Jy
! Component: 1950  -  total flux cleaned = 0.00227073 Jy
! Component: 2000  -  total flux cleaned = 0.00232428 Jy
! Total flux subtracted in 2048 components = 0.00231366 Jy
! Clean residual min=-0.000721 max=0.000612 Jy/beam
! Clean residual mean=0.000000 rms=0.000197 Jy/beam
! Combined flux in latest and established models = 0.155168 Jy
keep
! Adding 138 model components to the UV plane model.
! The established model now contains 252 components and 0.155168 Jy
![Exited script file: muppet]
wmap "J0824-2428_X_2017_04_28_pus\_map.fits"
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.8221 x 2.077 at -5.739 degrees (North through East)
! Clean map  min=-0.00091883  max=0.10914 Jy/beam
! Writing clean map to FITS file: J0824-2428_X_2017_04_28_pus_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is",peak_flux
! The peak flux is 0.109141 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000196472 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.540051 0.540051 1.0801 2.1602 4.32041 8.64082 17.2816 34.5633 69.1266
print "clev=",int(3*image_rms*10000)/10000
! clev= 0.0005 
print "peak=",int(1000*peak_flux)/1000
! peak= 0.109 
mapcolor none
! Mapplot colormap: none, contrast: 1 brightness: 0.5.
mapplot cln
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.8221 x 2.077 at -5.739 degrees (North through East)
! Clean map  min=-0.00091883  max=0.10914 Jy/beam
! Error occured in command: mapplot
! 
! <Aborted by EOF>
! <Aborted by EOF>
! <Aborted by EOF>
! <Aborted by EOF>
! 4 consecutive EOF's on stdin - 10 will exit program
! <Aborted by EOF>
! 5 consecutive EOF's on stdin - 10 will exit program
! <Aborted by EOF>
! 6 consecutive EOF's on stdin - 10 will exit program
! <Aborted by EOF>
! 7 consecutive EOF's on stdin - 10 will exit program
! <Aborted by EOF>
! 8 consecutive EOF's on stdin - 10 will exit program
! <Aborted by EOF>
! 9 consecutive EOF's on stdin - 10 will exit program
! <Aborted by EOF>
! 10 consecutive EOF's on stdin - 10 will exit program
! Log file J0824-2428_X_2017_04_28_pus_uvs.log closed on Mon Apr 29 14:26:28 2019