! Started logfile: J0824+4057_S_2017_10_21_pus_uvs.log on Sat May 11 20:54:09 2019 obs J0824+4057_S_2017_10_21_pus_uva.fits ! Reading UV FITS file: J0824+4057_S_2017_10_21_pus_uva.fits ! AN table 1: 116 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.951149 visibilities/baseline/integration-bin. ! Found source: J0824+4057 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 644 lines of history. ! ! Reading 15888 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J0824+4057_S_2017_10_21_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 83 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 185 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 42 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 798 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.987900Jy sigma=0.010723 ! Fit after self-cal, rms=0.959569Jy sigma=0.010438 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.549 mas, bmaj=6.184 mas, bpa=-28.3 degrees ! Estimated noise=1105.04 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0326387 Jy ! Component: 100 - total flux cleaned = 0.0402937 Jy ! Total flux subtracted in 100 components = 0.0402937 Jy ! Clean residual min=-0.003866 max=0.003651 Jy/beam ! Clean residual mean=0.000000 rms=0.000936 Jy/beam ! Combined flux in latest and established models = 0.0402937 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 10 components and 0.0402937 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.071794Jy sigma=0.000708 ! Fit after self-cal, rms=0.071079Jy sigma=0.000700 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=4.265 mas, bmaj=7.103 mas, bpa=-25.51 degrees ! Estimated noise=646.123 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00391118 Jy ! Component: 100 - total flux cleaned = 0.00567564 Jy ! Component: 150 - total flux cleaned = 0.00666415 Jy ! Component: 200 - total flux cleaned = 0.00724962 Jy ! Total flux subtracted in 200 components = 0.00724962 Jy ! Clean residual min=-0.002762 max=0.002426 Jy/beam ! Clean residual mean=-0.000007 rms=0.000656 Jy/beam ! Combined flux in latest and established models = 0.0475433 Jy ! Performing phase self-cal ! Adding 33 model components to the UV plane model. ! The established model now contains 39 components and 0.0475433 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.070832Jy sigma=0.000698 ! Fit after self-cal, rms=0.070807Jy sigma=0.000698 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.05 FD 1.06 HN 1.03 KP 1.09 ! LA 1.08 MK 1.10 NL 0.92 OV 1.01 ! PT 0.90 ! ! ! Correcting IF 2. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.12 FD 1.08 HN 1.04 KP 1.08 ! LA 0.95 MK 0.98 NL 1.17 OV 1.11 ! PT 0.81 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.85 FD 1.19 HN 1.05 KP 1.07 ! LA 0.83 MK 0.99 NL 1.14 OV 0.96 ! PT 0.84 ! ! ! Correcting IF 4. ! A total of 126 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.27 HN 0.75 KP 1.00* ! LA 0.65 MK 1.00* NL 1.00* OV 1.00* ! PT 0.68 ! ! ! Fit before self-cal, rms=0.070807Jy sigma=0.000698 ! Fit after self-cal, rms=0.069165Jy sigma=0.000694 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=4.281 mas, bmaj=7.175 mas, bpa=-25.27 degrees ! Estimated noise=654.253 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000425128 Jy ! Component: 100 - total flux cleaned = -0.000492485 Jy ! Component: 150 - total flux cleaned = -0.000506244 Jy ! Component: 200 - total flux cleaned = -0.000517994 Jy ! Total flux subtracted in 200 components = -0.000517994 Jy ! Clean residual min=-0.001921 max=0.002010 Jy/beam ! Clean residual mean=0.000001 rms=0.000457 Jy/beam ! Combined flux in latest and established models = 0.0470253 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 46 components and 0.0470253 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.069156Jy sigma=0.000694 ! Fit after self-cal, rms=0.069312Jy sigma=0.000693 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.069312Jy sigma=0.000693 ! Fit after self-cal, rms=0.069235Jy sigma=0.000692 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=4.307 mas, bmaj=7.223 mas, bpa=-25.13 degrees ! Estimated noise=653.947 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000497829 Jy ! Component: 100 - total flux cleaned = -0.000574604 Jy ! Component: 150 - total flux cleaned = -0.000646005 Jy ! Component: 200 - total flux cleaned = -0.000687847 Jy ! Total flux subtracted in 200 components = -0.000687847 Jy ! Clean residual min=-0.001860 max=0.001595 Jy/beam ! Clean residual mean=0.000000 rms=0.000432 Jy/beam ! Combined flux in latest and established models = 0.0463374 Jy selfcal ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 53 components and 0.0463374 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.069230Jy sigma=0.000692 ! Fit after self-cal, rms=0.069365Jy sigma=0.000692 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 4.79635e-05 Jy ! Component: 100 - total flux cleaned = 6.75025e-05 Jy ! Component: 150 - total flux cleaned = 7.58396e-05 Jy ! Component: 200 - total flux cleaned = 7.54406e-05 Jy ! Total flux subtracted in 200 components = 7.54406e-05 Jy ! Clean residual min=-0.001776 max=0.001620 Jy/beam ! Clean residual mean=-0.000001 rms=0.000433 Jy/beam ! Combined flux in latest and established models = 0.0464129 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 60 components and 0.0464129 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.069363Jy sigma=0.000692 ! Fit after self-cal, rms=0.069359Jy sigma=0.000692 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.069359Jy sigma=0.000692 ! Fit after self-cal, rms=0.069947Jy sigma=0.000692 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=4.319 mas, bmaj=7.271 mas, bpa=-25.07 degrees ! Estimated noise=654.485 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000444818 Jy ! Component: 100 - total flux cleaned = -0.000487067 Jy ! Component: 150 - total flux cleaned = -0.000505426 Jy ! Component: 200 - total flux cleaned = -0.000521766 Jy ! Total flux subtracted in 200 components = -0.000521766 Jy ! Clean residual min=-0.001823 max=0.001606 Jy/beam ! Clean residual mean=-0.000000 rms=0.000430 Jy/beam ! Combined flux in latest and established models = 0.0458911 Jy selfcal ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 63 components and 0.0458911 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.069943Jy sigma=0.000692 ! Fit after self-cal, rms=0.070011Jy sigma=0.000691 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -1.48389e-05 Jy ! Component: 100 - total flux cleaned = -1.46083e-05 Jy ! Component: 150 - total flux cleaned = -2.20417e-05 Jy ! Component: 200 - total flux cleaned = -1.50632e-05 Jy ! Total flux subtracted in 200 components = -1.50632e-05 Jy ! Clean residual min=-0.001821 max=0.001610 Jy/beam ! Clean residual mean=-0.000001 rms=0.000430 Jy/beam ! Combined flux in latest and established models = 0.0458761 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 66 components and 0.0458761 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.070009Jy sigma=0.000691 ! Fit after self-cal, rms=0.070011Jy sigma=0.000691 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.070011Jy sigma=0.000691 ! Fit after self-cal, rms=0.070347Jy sigma=0.000691 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.937 mas, bmaj=10.29 mas, bpa=-1.164 degrees ! Estimated noise=748.181 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -8.28214e-05 Jy ! Component: 100 - total flux cleaned = -8.3143e-05 Jy ! Component: 150 - total flux cleaned = -7.29099e-05 Jy ! Component: 200 - total flux cleaned = -6.3316e-05 Jy ! Total flux subtracted in 200 components = -6.3316e-05 Jy ! Clean residual min=-0.001648 max=0.001755 Jy/beam ! Clean residual mean=0.000001 rms=0.000459 Jy/beam ! Combined flux in latest and established models = 0.0458127 Jy selfcal ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 70 components and 0.0458127 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.070346Jy sigma=0.000691 ! Fit after self-cal, rms=0.070387Jy sigma=0.000691 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 7.0618e-05 Jy ! Component: 100 - total flux cleaned = 7.91748e-05 Jy ! Component: 150 - total flux cleaned = 8.68274e-05 Jy ! Component: 200 - total flux cleaned = 8.66971e-05 Jy ! Total flux subtracted in 200 components = 8.66971e-05 Jy ! Clean residual min=-0.001648 max=0.001737 Jy/beam ! Clean residual mean=0.000000 rms=0.000455 Jy/beam ! Combined flux in latest and established models = 0.0458994 Jy ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 71 components and 0.0458994 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.070387Jy sigma=0.000691 ! Fit after self-cal, rms=0.070393Jy sigma=0.000691 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=4.325 mas, bmaj=7.309 mas, bpa=-25.06 degrees ! Estimated noise=654.388 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.325 x 7.309 at -25.06 degrees (North through East) ! Clean map min=-0.0018295 max=0.043337 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.619 mas, bmaj=6.352 mas, bpa=-27.63 degrees ! Estimated noise=1082.13 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0329552 Jy ! Component: 100 - total flux cleaned = 0.040473 Jy ! Component: 150 - total flux cleaned = 0.0432061 Jy ! Component: 200 - total flux cleaned = 0.0432845 Jy ! Total flux subtracted in 200 components = 0.0432845 Jy ! Clean residual min=-0.002656 max=0.002233 Jy/beam ! Clean residual mean=-0.000001 rms=0.000652 Jy/beam ! Combined flux in latest and established models = 0.0432845 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 16 model components to the UV plane model. ! The established model now contains 16 components and 0.0432845 Jy ! Inverting map and beam ! Estimated beam: bmin=4.325 mas, bmaj=7.309 mas, bpa=-25.06 degrees ! Estimated noise=654.388 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00162784 Jy ! Component: 100 - total flux cleaned = 0.00199466 Jy ! Component: 150 - total flux cleaned = 0.00201677 Jy ! Component: 200 - total flux cleaned = 0.00199851 Jy ! Total flux subtracted in 200 components = 0.00199851 Jy ! Clean residual min=-0.001734 max=0.001716 Jy/beam ! Clean residual mean=-0.000001 rms=0.000438 Jy/beam ! Combined flux in latest and established models = 0.045283 Jy ! Adding 9 model components to the UV plane model. ! The established model now contains 23 components and 0.045283 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.937 mas, bmaj=10.29 mas, bpa=-1.164 degrees ! Estimated noise=748.181 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000464774 Jy ! Component: 100 - total flux cleaned = 0.000531592 Jy ! Component: 150 - total flux cleaned = 0.00054483 Jy ! Component: 200 - total flux cleaned = 0.00055672 Jy ! Total flux subtracted in 200 components = 0.00055672 Jy ! Clean residual min=-0.001702 max=0.001775 Jy/beam ! Clean residual mean=0.000000 rms=0.000459 Jy/beam ! Combined flux in latest and established models = 0.0458397 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 1.01886e-05 Jy ! Component: 100 - total flux cleaned = 1.95159e-05 Jy ! Component: 150 - total flux cleaned = 1.9992e-05 Jy ! Component: 200 - total flux cleaned = 2.80607e-05 Jy ! Total flux subtracted in 200 components = 2.80607e-05 Jy ! Clean residual min=-0.001683 max=0.001759 Jy/beam ! Clean residual mean=0.000000 rms=0.000455 Jy/beam ! Combined flux in latest and established models = 0.0458678 Jy ! Adding 7 model components to the UV plane model. ! The established model now contains 26 components and 0.0458678 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=4.325 mas, bmaj=7.309 mas, bpa=-25.06 degrees ! Estimated noise=654.388 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000260446 Jy ! Component: 100 - total flux cleaned = -0.000263214 Jy ! Component: 150 - total flux cleaned = -0.000289249 Jy ! Component: 200 - total flux cleaned = -0.000320585 Jy ! Total flux subtracted in 200 components = -0.000320585 Jy ! Clean residual min=-0.001828 max=0.001605 Jy/beam ! Clean residual mean=-0.000001 rms=0.000430 Jy/beam ! Combined flux in latest and established models = 0.0455472 Jy selfcal ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 33 components and 0.0455472 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.070391Jy sigma=0.000691 ! Fit after self-cal, rms=0.070387Jy sigma=0.000691 wmodel J0824+4057_S_2017_10_21_pus_map.mod ! Writing 33 model components to file: J0824+4057_S_2017_10_21_pus_map.mod wobs J0824+4057_S_2017_10_21_pus_uvs.fits ! Writing UV FITS file: J0824+4057_S_2017_10_21_pus_uvs.fits wwins J0824+4057_S_2017_10_21_pus_map.win ! wwins: Wrote 1 windows to J0824+4057_S_2017_10_21_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000148118 Jy ! Component: 100 - total flux cleaned = -0.000120613 Jy ! Component: 150 - total flux cleaned = -9.43155e-05 Jy ! Component: 200 - total flux cleaned = -4.37758e-05 Jy ! Component: 250 - total flux cleaned = 4.8523e-06 Jy ! Component: 300 - total flux cleaned = 5.17339e-05 Jy ! Component: 350 - total flux cleaned = 0.00018605 Jy ! Component: 400 - total flux cleaned = 0.000271444 Jy ! Component: 450 - total flux cleaned = 0.00031305 Jy ! Component: 500 - total flux cleaned = 0.000333717 Jy ! Component: 550 - total flux cleaned = 0.000314101 Jy ! Component: 600 - total flux cleaned = 0.000256321 Jy ! Component: 650 - total flux cleaned = 0.000219042 Jy ! Component: 700 - total flux cleaned = 0.000182758 Jy ! Component: 750 - total flux cleaned = 0.000254271 Jy ! Component: 800 - total flux cleaned = 0.000201565 Jy ! Component: 850 - total flux cleaned = 0.000201139 Jy ! Component: 900 - total flux cleaned = 0.000150526 Jy ! Component: 950 - total flux cleaned = 0.000150301 Jy ! Component: 1000 - total flux cleaned = 0.000166548 Jy ! Component: 1050 - total flux cleaned = 0.000166467 Jy ! Component: 1100 - total flux cleaned = 0.000197794 Jy ! Component: 1150 - total flux cleaned = 0.000243874 Jy ! Component: 1200 - total flux cleaned = 0.000274266 Jy ! Component: 1250 - total flux cleaned = 0.000274583 Jy ! Component: 1300 - total flux cleaned = 0.000376644 Jy ! Component: 1350 - total flux cleaned = 0.00039072 Jy ! Component: 1400 - total flux cleaned = 0.000376633 Jy ! Component: 1450 - total flux cleaned = 0.000321125 Jy ! Component: 1500 - total flux cleaned = 0.000293851 Jy ! Component: 1550 - total flux cleaned = 0.000253227 Jy ! Component: 1600 - total flux cleaned = 0.000186373 Jy ! Component: 1650 - total flux cleaned = 0.000107538 Jy ! Component: 1700 - total flux cleaned = 9.45407e-05 Jy ! Component: 1750 - total flux cleaned = 5.59093e-05 Jy ! Component: 1800 - total flux cleaned = 1.7548e-05 Jy ! Component: 1850 - total flux cleaned = -3.26518e-05 Jy ! Component: 1900 - total flux cleaned = -4.49225e-05 Jy ! Component: 1950 - total flux cleaned = -6.9558e-05 Jy ! Component: 2000 - total flux cleaned = -8.17907e-05 Jy ! Component: 2050 - total flux cleaned = -0.00016545 Jy ! Component: 2100 - total flux cleaned = -0.000165454 Jy ! Component: 2150 - total flux cleaned = -0.000223896 Jy ! Component: 2200 - total flux cleaned = -0.000235382 Jy ! Component: 2250 - total flux cleaned = -0.000280922 Jy ! Component: 2300 - total flux cleaned = -0.000269413 Jy ! Component: 2350 - total flux cleaned = -0.000302849 Jy ! Component: 2400 - total flux cleaned = -0.000280598 Jy ! Component: 2450 - total flux cleaned = -0.000291612 Jy ! Component: 2500 - total flux cleaned = -0.000313473 Jy ! Component: 2550 - total flux cleaned = -0.000281302 Jy ! Component: 2600 - total flux cleaned = -0.000302528 Jy ! Component: 2650 - total flux cleaned = -0.000281377 Jy ! Component: 2700 - total flux cleaned = -0.000281317 Jy ! Component: 2750 - total flux cleaned = -0.000260702 Jy ! Component: 2800 - total flux cleaned = -0.000291453 Jy ! Component: 2850 - total flux cleaned = -0.000301397 Jy ! Component: 2900 - total flux cleaned = -0.000311437 Jy ! Component: 2950 - total flux cleaned = -0.000301425 Jy ! Component: 3000 - total flux cleaned = -0.000321076 Jy ! Component: 3050 - total flux cleaned = -0.000360115 Jy ! Component: 3100 - total flux cleaned = -0.000379445 Jy ! Component: 3150 - total flux cleaned = -0.000408355 Jy ! Component: 3200 - total flux cleaned = -0.000427347 Jy ! Component: 3250 - total flux cleaned = -0.000465198 Jy ! Component: 3300 - total flux cleaned = -0.000493447 Jy ! Component: 3350 - total flux cleaned = -0.000558717 Jy ! Component: 3400 - total flux cleaned = -0.000604996 Jy ! Component: 3450 - total flux cleaned = -0.000651 Jy ! Component: 3500 - total flux cleaned = -0.000714935 Jy ! Component: 3550 - total flux cleaned = -0.000796622 Jy ! Component: 3600 - total flux cleaned = -0.000823585 Jy ! Component: 3650 - total flux cleaned = -0.000886152 Jy ! Component: 3700 - total flux cleaned = -0.000948394 Jy ! Component: 3750 - total flux cleaned = -0.00101029 Jy ! Component: 3800 - total flux cleaned = -0.00108051 Jy ! Component: 3850 - total flux cleaned = -0.00113291 Jy ! Component: 3900 - total flux cleaned = -0.00121091 Jy ! Component: 3950 - total flux cleaned = -0.00127973 Jy ! Component: 4000 - total flux cleaned = -0.00135666 Jy ! Component: 4050 - total flux cleaned = -0.00140761 Jy ! Total flux subtracted in 4096 components = -0.00143301 Jy ! Clean residual min=-0.000421 max=0.000537 Jy/beam ! Clean residual mean=-0.000002 rms=0.000149 Jy/beam ! Combined flux in latest and established models = 0.0441142 Jy keep ! Adding 287 model components to the UV plane model. ! The established model now contains 320 components and 0.0441142 Jy ![Exited script file: muppet] wmap "J0824+4057_S_2017_10_21_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.325 x 7.309 at -25.06 degrees (North through East) ! Clean map min=-0.001068 max=0.043316 Jy/beam ! Writing clean map to FITS file: J0824+4057_S_2017_10_21_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.0433164 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000145042 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -1.00453 1.00453 2.00906 4.01813 8.03626 16.0725 32.145 64.2901 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0004 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.043 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.325 x 7.309 at -25.06 degrees (North through East) ! Clean map min=-0.001068 max=0.043316 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J0824+4057_S_2017_10_21_pus_uvs.log closed on Sat May 11 20:54:14 2019