! Started logfile: J0815+3635_S_2017_07_09_pus_uvs.log on Wed May 8 14:44:52 2019 obs J0815+3635_S_2017_07_09_pus_uva.fits ! Reading UV FITS file: J0815+3635_S_2017_07_09_pus_uva.fits ! AN table 1: 47 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.837825 visibilities/baseline/integration-bin. ! Found source: J0815+3635 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 594 lines of history. ! ! Reading 7088 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J0815+3635_S_2017_07_09_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 42 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 42 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 42 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 283 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.566366Jy sigma=0.005300 ! Fit after self-cal, rms=0.523264Jy sigma=0.004935 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.309 mas, bmaj=5.399 mas, bpa=2.572 degrees ! Estimated noise=1245.44 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.373523 Jy ! Component: 100 - total flux cleaned = 0.460281 Jy ! Total flux subtracted in 100 components = 0.460281 Jy ! Clean residual min=-0.014430 max=0.041301 Jy/beam ! Clean residual mean=0.000065 rms=0.004214 Jy/beam ! Combined flux in latest and established models = 0.460281 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 11 components and 0.460281 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.120782Jy sigma=0.001118 ! Fit after self-cal, rms=0.120753Jy sigma=0.001117 ! Inverting map ! Added new window around map position (-1.5, 8.5). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0443748 Jy ! Component: 100 - total flux cleaned = 0.0721356 Jy ! Total flux subtracted in 100 components = 0.0721356 Jy ! Clean residual min=-0.010992 max=0.021302 Jy/beam ! Clean residual mean=0.000036 rms=0.002908 Jy/beam ! Combined flux in latest and established models = 0.532416 Jy ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 27 components and 0.532416 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.100023Jy sigma=0.000899 ! Fit after self-cal, rms=0.098895Jy sigma=0.000890 ! Inverting map ! Added new window around map position (-5, 15.5). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0231949 Jy ! Component: 100 - total flux cleaned = 0.0381858 Jy ! Total flux subtracted in 100 components = 0.0381858 Jy ! Clean residual min=-0.009434 max=0.011708 Jy/beam ! Clean residual mean=0.000022 rms=0.002262 Jy/beam ! Combined flux in latest and established models = 0.570602 Jy ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 46 components and 0.570602 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.092447Jy sigma=0.000823 ! Fit after self-cal, rms=0.091989Jy sigma=0.000819 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=4.198 mas, bmaj=6.376 mas, bpa=3.834 degrees ! Estimated noise=1005 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0144608 Jy ! Component: 100 - total flux cleaned = 0.023951 Jy ! Component: 150 - total flux cleaned = 0.0305958 Jy ! Component: 200 - total flux cleaned = 0.0354244 Jy ! Total flux subtracted in 200 components = 0.0354244 Jy ! Clean residual min=-0.006706 max=0.009266 Jy/beam ! Clean residual mean=0.000013 rms=0.001863 Jy/beam ! Combined flux in latest and established models = 0.606027 Jy ! Performing phase self-cal ! Adding 59 model components to the UV plane model. ! The established model now contains 98 components and 0.606027 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.089238Jy sigma=0.000792 ! Fit after self-cal, rms=0.088999Jy sigma=0.000790 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.02 FD 0.97 HN 0.96 KP 1.02 ! LA 1.00 MK 1.01 NL 0.89 OV 1.00 ! PT 1.01 SC 0.98 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.06 FD 1.01 HN 1.00 KP 0.98 ! LA 0.97 MK 1.01 NL 1.00 OV 1.11 ! PT 0.97 SC 1.06 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.92 FD 1.03 HN 0.99 KP 0.99 ! LA 0.97 MK 1.04 NL 0.98 OV 0.96 ! PT 0.97 SC 1.05 ! ! ! Correcting IF 4. ! A total of 18 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.07 HN 0.98 KP 1.00* ! LA 1.01 MK 1.24 NL 1.00* OV 1.00* ! PT 1.01 SC 1.00* ! ! ! Fit before self-cal, rms=0.088999Jy sigma=0.000790 ! Fit after self-cal, rms=0.083242Jy sigma=0.000732 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=4.244 mas, bmaj=6.415 mas, bpa=3.68 degrees ! Estimated noise=1003.01 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00142755 Jy ! Component: 100 - total flux cleaned = 0.00211336 Jy ! Component: 150 - total flux cleaned = 0.00282548 Jy ! Component: 200 - total flux cleaned = 0.00337554 Jy ! Total flux subtracted in 200 components = 0.00337554 Jy ! Clean residual min=-0.005919 max=0.005515 Jy/beam ! Clean residual mean=0.000012 rms=0.001489 Jy/beam ! Combined flux in latest and established models = 0.609402 Jy ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 116 components and 0.609402 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.082829Jy sigma=0.000728 ! Fit after self-cal, rms=0.082799Jy sigma=0.000728 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.082799Jy sigma=0.000728 ! Fit after self-cal, rms=0.079348Jy sigma=0.000692 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=4.236 mas, bmaj=6.398 mas, bpa=3.981 degrees ! Estimated noise=1003.48 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00175121 Jy ! Component: 100 - total flux cleaned = 0.00229012 Jy ! Component: 150 - total flux cleaned = 0.00256937 Jy ! Component: 200 - total flux cleaned = 0.00275904 Jy ! Total flux subtracted in 200 components = 0.00275904 Jy ! Clean residual min=-0.004053 max=0.004094 Jy/beam ! Clean residual mean=0.000005 rms=0.000983 Jy/beam ! Combined flux in latest and established models = 0.612161 Jy selfcal ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 129 components and 0.612161 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.079268Jy sigma=0.000691 ! Fit after self-cal, rms=0.079273Jy sigma=0.000691 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000535132 Jy ! Component: 100 - total flux cleaned = 0.000701399 Jy ! Component: 150 - total flux cleaned = 0.000738715 Jy ! Component: 200 - total flux cleaned = 0.000772932 Jy ! Total flux subtracted in 200 components = 0.000772932 Jy ! Clean residual min=-0.004070 max=0.004040 Jy/beam ! Clean residual mean=0.000005 rms=0.000976 Jy/beam ! Combined flux in latest and established models = 0.612934 Jy ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 136 components and 0.612934 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.079243Jy sigma=0.000691 ! Fit after self-cal, rms=0.079239Jy sigma=0.000691 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.079239Jy sigma=0.000691 ! Fit after self-cal, rms=0.078050Jy sigma=0.000677 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=4.232 mas, bmaj=6.402 mas, bpa=4.106 degrees ! Estimated noise=1002.91 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000521749 Jy ! Component: 100 - total flux cleaned = 0.000394625 Jy ! Component: 150 - total flux cleaned = 0.000341116 Jy ! Component: 200 - total flux cleaned = 0.000294268 Jy ! Total flux subtracted in 200 components = 0.000294268 Jy ! Clean residual min=-0.002770 max=0.002615 Jy/beam ! Clean residual mean=0.000001 rms=0.000634 Jy/beam ! Combined flux in latest and established models = 0.613228 Jy selfcal ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 152 components and 0.613228 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.077965Jy sigma=0.000676 ! Fit after self-cal, rms=0.077973Jy sigma=0.000676 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 9.40748e-06 Jy ! Component: 100 - total flux cleaned = 1.04255e-05 Jy ! Component: 150 - total flux cleaned = 1.18208e-05 Jy ! Component: 200 - total flux cleaned = 1.39755e-05 Jy ! Total flux subtracted in 200 components = 1.39755e-05 Jy ! Clean residual min=-0.002711 max=0.002582 Jy/beam ! Clean residual mean=0.000001 rms=0.000625 Jy/beam ! Combined flux in latest and established models = 0.613242 Jy ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 156 components and 0.613242 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.077945Jy sigma=0.000675 ! Fit after self-cal, rms=0.077942Jy sigma=0.000675 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.077942Jy sigma=0.000675 ! Fit after self-cal, rms=0.078010Jy sigma=0.000675 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.412 mas, bmaj=9.466 mas, bpa=-0.6391 degrees ! Estimated noise=1166 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -3.6757e-05 Jy ! Component: 100 - total flux cleaned = 0.000145101 Jy ! Component: 150 - total flux cleaned = 0.000274357 Jy ! Component: 200 - total flux cleaned = 0.000330737 Jy ! Total flux subtracted in 200 components = 0.000330737 Jy ! Clean residual min=-0.002646 max=0.002313 Jy/beam ! Clean residual mean=-0.000000 rms=0.000680 Jy/beam ! Combined flux in latest and established models = 0.613573 Jy selfcal ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 163 components and 0.613573 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.078001Jy sigma=0.000675 ! Fit after self-cal, rms=0.077997Jy sigma=0.000675 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -7.59048e-06 Jy ! Component: 100 - total flux cleaned = 0.00010927 Jy ! Component: 150 - total flux cleaned = 0.000159491 Jy ! Component: 200 - total flux cleaned = 0.000175518 Jy ! Total flux subtracted in 200 components = 0.000175518 Jy ! Clean residual min=-0.002656 max=0.002308 Jy/beam ! Clean residual mean=-0.000000 rms=0.000676 Jy/beam ! Combined flux in latest and established models = 0.613748 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 167 components and 0.613748 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.077995Jy sigma=0.000675 ! Fit after self-cal, rms=0.077992Jy sigma=0.000675 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=4.232 mas, bmaj=6.403 mas, bpa=4.204 degrees ! Estimated noise=1002.73 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.232 x 6.403 at 4.204 degrees (North through East) ! Clean map min=-0.0025881 max=0.47671 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.342 mas, bmaj=5.424 mas, bpa=2.794 degrees ! Estimated noise=1244.95 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.372528 Jy ! Component: 100 - total flux cleaned = 0.460946 Jy ! Component: 150 - total flux cleaned = 0.506192 Jy ! Component: 200 - total flux cleaned = 0.535279 Jy ! Total flux subtracted in 200 components = 0.535279 Jy ! Clean residual min=-0.006407 max=0.015608 Jy/beam ! Clean residual mean=0.000032 rms=0.001855 Jy/beam ! Combined flux in latest and established models = 0.535279 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 25 model components to the UV plane model. ! The established model now contains 25 components and 0.535279 Jy ! Inverting map and beam ! Estimated beam: bmin=4.232 mas, bmaj=6.403 mas, bpa=4.204 degrees ! Estimated noise=1002.73 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0259874 Jy ! Component: 100 - total flux cleaned = 0.0421176 Jy ! Component: 150 - total flux cleaned = 0.0527966 Jy ! Component: 200 - total flux cleaned = 0.0600422 Jy ! Total flux subtracted in 200 components = 0.0600422 Jy ! Clean residual min=-0.003685 max=0.003985 Jy/beam ! Clean residual mean=0.000009 rms=0.000828 Jy/beam ! Combined flux in latest and established models = 0.595321 Jy ! Adding 68 model components to the UV plane model. ! The established model now contains 83 components and 0.595321 Jy ! Inverting map ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00506731 Jy ! Component: 100 - total flux cleaned = 0.00872415 Jy ! Component: 150 - total flux cleaned = 0.0114101 Jy ! Component: 200 - total flux cleaned = 0.0134081 Jy ! Total flux subtracted in 200 components = 0.0134081 Jy ! Clean residual min=-0.002868 max=0.002520 Jy/beam ! Clean residual mean=0.000003 rms=0.000630 Jy/beam ! Combined flux in latest and established models = 0.608729 Jy ! Adding 44 model components to the UV plane model. ! The established model now contains 117 components and 0.608729 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.412 mas, bmaj=9.466 mas, bpa=-0.6391 degrees ! Estimated noise=1166 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00222248 Jy ! Component: 100 - total flux cleaned = 0.00351503 Jy ! Component: 150 - total flux cleaned = 0.00405696 Jy ! Component: 200 - total flux cleaned = 0.00431387 Jy ! Total flux subtracted in 200 components = 0.00431387 Jy ! Clean residual min=-0.002739 max=0.002325 Jy/beam ! Clean residual mean=0.000000 rms=0.000679 Jy/beam ! Combined flux in latest and established models = 0.613043 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000214542 Jy ! Component: 100 - total flux cleaned = 0.000375338 Jy ! Component: 150 - total flux cleaned = 0.000513163 Jy ! Component: 200 - total flux cleaned = 0.000616946 Jy ! Total flux subtracted in 200 components = 0.000616946 Jy ! Clean residual min=-0.002693 max=0.002310 Jy/beam ! Clean residual mean=-0.000000 rms=0.000675 Jy/beam ! Combined flux in latest and established models = 0.61366 Jy ! Adding 42 model components to the UV plane model. ! The established model now contains 148 components and 0.61366 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=4.232 mas, bmaj=6.403 mas, bpa=4.204 degrees ! Estimated noise=1002.73 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000152416 Jy ! Component: 100 - total flux cleaned = 0.000303493 Jy ! Component: 150 - total flux cleaned = 0.000347759 Jy ! Component: 200 - total flux cleaned = 0.000367704 Jy ! Total flux subtracted in 200 components = 0.000367704 Jy ! Clean residual min=-0.002600 max=0.002555 Jy/beam ! Clean residual mean=0.000001 rms=0.000603 Jy/beam ! Combined flux in latest and established models = 0.614028 Jy selfcal ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 158 components and 0.614028 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.077946Jy sigma=0.000675 ! Fit after self-cal, rms=0.077939Jy sigma=0.000675 wmodel J0815+3635_S_2017_07_09_pus_map.mod ! Writing 158 model components to file: J0815+3635_S_2017_07_09_pus_map.mod wobs J0815+3635_S_2017_07_09_pus_uvs.fits ! Writing UV FITS file: J0815+3635_S_2017_07_09_pus_uvs.fits wwins J0815+3635_S_2017_07_09_pus_map.win ! wwins: Wrote 3 windows to J0815+3635_S_2017_07_09_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.00076555 Jy ! Component: 100 - total flux cleaned = -0.00122394 Jy ! Component: 150 - total flux cleaned = -0.00138218 Jy ! Component: 200 - total flux cleaned = -0.00134349 Jy ! Component: 250 - total flux cleaned = -0.00134324 Jy ! Component: 300 - total flux cleaned = -0.00130676 Jy ! Component: 350 - total flux cleaned = -0.00137595 Jy ! Component: 400 - total flux cleaned = -0.00130625 Jy ! Component: 450 - total flux cleaned = -0.00130592 Jy ! Component: 500 - total flux cleaned = -0.00123902 Jy ! Component: 550 - total flux cleaned = -0.00123867 Jy ! Component: 600 - total flux cleaned = -0.00130282 Jy ! Component: 650 - total flux cleaned = -0.00133405 Jy ! Component: 700 - total flux cleaned = -0.00133391 Jy ! Component: 750 - total flux cleaned = -0.00136427 Jy ! Component: 800 - total flux cleaned = -0.00136457 Jy ! Component: 850 - total flux cleaned = -0.00145465 Jy ! Component: 900 - total flux cleaned = -0.0014249 Jy ! Component: 950 - total flux cleaned = -0.00151281 Jy ! Component: 1000 - total flux cleaned = -0.00148401 Jy ! Component: 1050 - total flux cleaned = -0.00154187 Jy ! Component: 1100 - total flux cleaned = -0.00168368 Jy ! Component: 1150 - total flux cleaned = -0.00165569 Jy ! Component: 1200 - total flux cleaned = -0.00176613 Jy ! Component: 1250 - total flux cleaned = -0.00184803 Jy ! Component: 1300 - total flux cleaned = -0.00184814 Jy ! Component: 1350 - total flux cleaned = -0.001929 Jy ! Component: 1400 - total flux cleaned = -0.00203528 Jy ! Component: 1450 - total flux cleaned = -0.0019565 Jy ! Component: 1500 - total flux cleaned = -0.00213876 Jy ! Component: 1550 - total flux cleaned = -0.00211259 Jy ! Component: 1600 - total flux cleaned = -0.00213827 Jy ! Component: 1650 - total flux cleaned = -0.00216358 Jy ! Component: 1700 - total flux cleaned = -0.00221401 Jy ! Component: 1750 - total flux cleaned = -0.00223879 Jy ! Component: 1800 - total flux cleaned = -0.00223908 Jy ! Component: 1850 - total flux cleaned = -0.00223906 Jy ! Component: 1900 - total flux cleaned = -0.00223947 Jy ! Component: 1950 - total flux cleaned = -0.00228774 Jy ! Component: 2000 - total flux cleaned = -0.00231171 Jy ! Component: 2050 - total flux cleaned = -0.00245381 Jy ! Component: 2100 - total flux cleaned = -0.00233583 Jy ! Component: 2150 - total flux cleaned = -0.00235933 Jy ! Component: 2200 - total flux cleaned = -0.0023591 Jy ! Component: 2250 - total flux cleaned = -0.0024512 Jy ! Component: 2300 - total flux cleaned = -0.00247432 Jy ! Component: 2350 - total flux cleaned = -0.00254245 Jy ! Component: 2400 - total flux cleaned = -0.00251977 Jy ! Component: 2450 - total flux cleaned = -0.00256483 Jy ! Component: 2500 - total flux cleaned = -0.00265394 Jy ! Component: 2550 - total flux cleaned = -0.00272017 Jy ! Component: 2600 - total flux cleaned = -0.00278602 Jy ! Component: 2650 - total flux cleaned = -0.00265492 Jy ! Component: 2700 - total flux cleaned = -0.00269835 Jy ! Component: 2750 - total flux cleaned = -0.00274157 Jy ! Component: 2800 - total flux cleaned = -0.00276292 Jy ! Component: 2850 - total flux cleaned = -0.00265651 Jy ! Component: 2900 - total flux cleaned = -0.00274143 Jy ! Component: 2950 - total flux cleaned = -0.00263611 Jy ! Component: 3000 - total flux cleaned = -0.00259423 Jy ! Component: 3050 - total flux cleaned = -0.00261491 Jy ! Component: 3100 - total flux cleaned = -0.00261485 Jy ! Component: 3150 - total flux cleaned = -0.00263534 Jy ! Component: 3200 - total flux cleaned = -0.00253307 Jy ! Component: 3250 - total flux cleaned = -0.00259407 Jy ! Component: 3300 - total flux cleaned = -0.00257362 Jy ! Component: 3350 - total flux cleaned = -0.00267405 Jy ! Component: 3400 - total flux cleaned = -0.00265402 Jy ! Component: 3450 - total flux cleaned = -0.00259448 Jy ! Component: 3500 - total flux cleaned = -0.00263421 Jy ! Component: 3550 - total flux cleaned = -0.00267343 Jy ! Component: 3600 - total flux cleaned = -0.00275175 Jy ! Component: 3650 - total flux cleaned = -0.00271286 Jy ! Component: 3700 - total flux cleaned = -0.00280956 Jy ! Component: 3750 - total flux cleaned = -0.00277089 Jy ! Component: 3800 - total flux cleaned = -0.00282832 Jy ! Component: 3850 - total flux cleaned = -0.00282833 Jy ! Component: 3900 - total flux cleaned = -0.00294185 Jy ! Component: 3950 - total flux cleaned = -0.00296074 Jy ! Component: 4000 - total flux cleaned = -0.00299831 Jy ! Component: 4050 - total flux cleaned = -0.00305445 Jy ! Total flux subtracted in 4096 components = -0.00303588 Jy ! Clean residual min=-0.001015 max=0.001119 Jy/beam ! Clean residual mean=-0.000002 rms=0.000352 Jy/beam ! Combined flux in latest and established models = 0.610992 Jy keep ! Adding 290 model components to the UV plane model. ! The established model now contains 448 components and 0.610992 Jy ![Exited script file: muppet] wmap "J0815+3635_S_2017_07_09_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.232 x 6.403 at 4.204 degrees (North through East) ! Clean map min=-0.0020385 max=0.47665 Jy/beam ! Writing clean map to FITS file: J0815+3635_S_2017_07_09_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.47665 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000351096 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.220977 0.220977 0.441955 0.883909 1.76782 3.53564 7.07127 14.1425 28.2851 56.5702 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.001 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.476 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.232 x 6.403 at 4.204 degrees (North through East) ! Clean map min=-0.0020385 max=0.47665 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J0815+3635_S_2017_07_09_pus_uvs.log closed on Wed May 8 14:44:56 2019