! Started logfile: J0814+5609_S_2017_10_21_pus_uvs.log on Sat May 11 20:53:59 2019 obs J0814+5609_S_2017_10_21_pus_uva.fits ! Reading UV FITS file: J0814+5609_S_2017_10_21_pus_uva.fits ! AN table 1: 144 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.980903 visibilities/baseline/integration-bin. ! Found source: J0814+5609 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 644 lines of history. ! ! Reading 20340 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J0814+5609_S_2017_10_21_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 14 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 42 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 14 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 650 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.994132Jy sigma=0.009854 ! Fit after self-cal, rms=0.963614Jy sigma=0.009557 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.305 mas, bmaj=4.819 mas, bpa=-58.6 degrees ! Estimated noise=1137.53 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0290688 Jy ! Component: 100 - total flux cleaned = 0.0365457 Jy ! Total flux subtracted in 100 components = 0.0365457 Jy ! Clean residual min=-0.004033 max=0.003719 Jy/beam ! Clean residual mean=-0.000006 rms=0.000983 Jy/beam ! Combined flux in latest and established models = 0.0365457 Jy ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 8 components and 0.0365457 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.074428Jy sigma=0.000684 ! Fit after self-cal, rms=0.073224Jy sigma=0.000671 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=4.437 mas, bmaj=5.746 mas, bpa=-64.26 degrees ! Estimated noise=571.175 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00467883 Jy ! Component: 100 - total flux cleaned = 0.00638287 Jy ! Component: 150 - total flux cleaned = 0.00729674 Jy ! Component: 200 - total flux cleaned = 0.00783774 Jy ! Total flux subtracted in 200 components = 0.00783774 Jy ! Clean residual min=-0.002581 max=0.002332 Jy/beam ! Clean residual mean=-0.000017 rms=0.000632 Jy/beam ! Combined flux in latest and established models = 0.0443834 Jy ! Performing phase self-cal ! Adding 35 model components to the UV plane model. ! The established model now contains 40 components and 0.0443834 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.072920Jy sigma=0.000669 ! Fit after self-cal, rms=0.072908Jy sigma=0.000668 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.05 FD 1.08 HN 1.07 KP 1.18 ! LA 1.08 MK 0.99 NL 1.01 OV 1.13 ! PT 0.82 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 1.06 HN 1.09 KP 1.06 ! LA 0.97 MK 1.05 NL 0.91 OV 1.07 ! PT 0.82 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.91 FD 1.10 HN 1.00 KP 1.15 ! LA 0.93 MK 1.02 NL 1.17 OV 1.02 ! PT 0.82 ! ! ! Correcting IF 4. ! A total of 12 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.02 HN 0.95 KP 1.00* ! LA 0.79 MK 0.89 NL 1.00* OV 1.00* ! PT 0.71 ! ! ! Fit before self-cal, rms=0.072908Jy sigma=0.000668 ! Fit after self-cal, rms=0.072625Jy sigma=0.000664 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=4.482 mas, bmaj=5.758 mas, bpa=-65.05 degrees ! Estimated noise=571.995 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00037142 Jy ! Component: 100 - total flux cleaned = 0.000391051 Jy ! Component: 150 - total flux cleaned = 0.000384182 Jy ! Component: 200 - total flux cleaned = 0.000377678 Jy ! Total flux subtracted in 200 components = 0.000377678 Jy ! Clean residual min=-0.001916 max=0.001644 Jy/beam ! Clean residual mean=0.000015 rms=0.000411 Jy/beam ! Combined flux in latest and established models = 0.0447611 Jy ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 47 components and 0.0447611 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.072621Jy sigma=0.000664 ! Fit after self-cal, rms=0.072887Jy sigma=0.000663 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.072887Jy sigma=0.000663 ! Fit after self-cal, rms=0.074012Jy sigma=0.000662 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=4.505 mas, bmaj=5.791 mas, bpa=-65.23 degrees ! Estimated noise=575.014 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000180833 Jy ! Component: 100 - total flux cleaned = 0.00017093 Jy ! Component: 150 - total flux cleaned = 0.000163418 Jy ! Component: 200 - total flux cleaned = 0.000169696 Jy ! Total flux subtracted in 200 components = 0.000169696 Jy ! Clean residual min=-0.001850 max=0.001547 Jy/beam ! Clean residual mean=0.000005 rms=0.000382 Jy/beam ! Combined flux in latest and established models = 0.0449308 Jy selfcal ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 52 components and 0.0449308 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.074008Jy sigma=0.000662 ! Fit after self-cal, rms=0.074291Jy sigma=0.000661 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -1.77676e-05 Jy ! Component: 100 - total flux cleaned = 1.43703e-05 Jy ! Component: 150 - total flux cleaned = 4.11905e-05 Jy ! Component: 200 - total flux cleaned = 6.45982e-05 Jy ! Total flux subtracted in 200 components = 6.45982e-05 Jy ! Clean residual min=-0.001707 max=0.001596 Jy/beam ! Clean residual mean=0.000001 rms=0.000410 Jy/beam ! Combined flux in latest and established models = 0.0449954 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 58 components and 0.0449954 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.074287Jy sigma=0.000661 ! Fit after self-cal, rms=0.074299Jy sigma=0.000661 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.074299Jy sigma=0.000661 ! Fit after self-cal, rms=0.075704Jy sigma=0.000661 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=4.526 mas, bmaj=5.764 mas, bpa=-65.91 degrees ! Estimated noise=576.671 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000151497 Jy ! Component: 100 - total flux cleaned = 0.000140246 Jy ! Component: 150 - total flux cleaned = 0.000140355 Jy ! Component: 200 - total flux cleaned = 0.000139571 Jy ! Total flux subtracted in 200 components = 0.000139571 Jy ! Clean residual min=-0.001695 max=0.001507 Jy/beam ! Clean residual mean=0.000005 rms=0.000393 Jy/beam ! Combined flux in latest and established models = 0.045135 Jy selfcal ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 59 components and 0.045135 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.075699Jy sigma=0.000661 ! Fit after self-cal, rms=0.075922Jy sigma=0.000661 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -4.63057e-05 Jy ! Component: 100 - total flux cleaned = -5.58167e-05 Jy ! Component: 150 - total flux cleaned = -6.37671e-05 Jy ! Component: 200 - total flux cleaned = -5.66396e-05 Jy ! Total flux subtracted in 200 components = -5.66396e-05 Jy ! Clean residual min=-0.001645 max=0.001539 Jy/beam ! Clean residual mean=0.000002 rms=0.000400 Jy/beam ! Combined flux in latest and established models = 0.0450783 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 61 components and 0.0450783 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.075919Jy sigma=0.000661 ! Fit after self-cal, rms=0.075932Jy sigma=0.000661 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.075932Jy sigma=0.000661 ! Fit after self-cal, rms=0.076980Jy sigma=0.000661 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.377 mas, bmaj=10.44 mas, bpa=66.43 degrees ! Estimated noise=678.975 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000153376 Jy ! Component: 100 - total flux cleaned = 0.000149478 Jy ! Component: 150 - total flux cleaned = 0.00014582 Jy ! Component: 200 - total flux cleaned = 0.000142342 Jy ! Total flux subtracted in 200 components = 0.000142342 Jy ! Clean residual min=-0.001608 max=0.001593 Jy/beam ! Clean residual mean=0.000007 rms=0.000459 Jy/beam ! Combined flux in latest and established models = 0.0452207 Jy selfcal ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 65 components and 0.0452207 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.076979Jy sigma=0.000661 ! Fit after self-cal, rms=0.077107Jy sigma=0.000661 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -1.35221e-05 Jy ! Component: 100 - total flux cleaned = -1.61947e-05 Jy ! Component: 150 - total flux cleaned = -1.63439e-05 Jy ! Component: 200 - total flux cleaned = -1.41639e-05 Jy ! Total flux subtracted in 200 components = -1.41639e-05 Jy ! Clean residual min=-0.001606 max=0.001623 Jy/beam ! Clean residual mean=0.000006 rms=0.000461 Jy/beam ! Combined flux in latest and established models = 0.0452065 Jy ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 70 components and 0.0452065 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.077107Jy sigma=0.000661 ! Fit after self-cal, rms=0.077112Jy sigma=0.000661 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=4.532 mas, bmaj=5.736 mas, bpa=-66.41 degrees ! Estimated noise=577.746 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.532 x 5.736 at -66.41 degrees (North through East) ! Clean map min=-0.0015426 max=0.040103 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.372 mas, bmaj=4.78 mas, bpa=-60.3 degrees ! Estimated noise=1148.77 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0299683 Jy ! Component: 100 - total flux cleaned = 0.0377913 Jy ! Component: 150 - total flux cleaned = 0.0410787 Jy ! Component: 200 - total flux cleaned = 0.0429674 Jy ! Total flux subtracted in 200 components = 0.0429674 Jy ! Clean residual min=-0.002847 max=0.002589 Jy/beam ! Clean residual mean=0.000003 rms=0.000702 Jy/beam ! Combined flux in latest and established models = 0.0429674 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 23 model components to the UV plane model. ! The established model now contains 23 components and 0.0429674 Jy ! Inverting map and beam ! Estimated beam: bmin=4.532 mas, bmaj=5.736 mas, bpa=-66.41 degrees ! Estimated noise=577.746 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00159323 Jy ! Component: 100 - total flux cleaned = 0.00192889 Jy ! Component: 150 - total flux cleaned = 0.00208987 Jy ! Component: 200 - total flux cleaned = 0.00223138 Jy ! Total flux subtracted in 200 components = 0.00223138 Jy ! Clean residual min=-0.001626 max=0.001457 Jy/beam ! Clean residual mean=0.000003 rms=0.000395 Jy/beam ! Combined flux in latest and established models = 0.0451987 Jy ! Adding 14 model components to the UV plane model. ! The established model now contains 37 components and 0.0451987 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.377 mas, bmaj=10.44 mas, bpa=66.43 degrees ! Estimated noise=678.975 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 9.6616e-05 Jy ! Component: 100 - total flux cleaned = 9.63824e-05 Jy ! Component: 150 - total flux cleaned = 9.06215e-05 Jy ! Component: 200 - total flux cleaned = 9.03356e-05 Jy ! Total flux subtracted in 200 components = 9.03356e-05 Jy ! Clean residual min=-0.001609 max=0.001630 Jy/beam ! Clean residual mean=0.000006 rms=0.000461 Jy/beam ! Combined flux in latest and established models = 0.0452891 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -4.21513e-06 Jy ! Component: 100 - total flux cleaned = -8.00533e-06 Jy ! Component: 150 - total flux cleaned = -1.48854e-05 Jy ! Component: 200 - total flux cleaned = -1.81126e-05 Jy ! Total flux subtracted in 200 components = -1.81126e-05 Jy ! Clean residual min=-0.001604 max=0.001633 Jy/beam ! Clean residual mean=0.000006 rms=0.000461 Jy/beam ! Combined flux in latest and established models = 0.045271 Jy ! Adding 13 model components to the UV plane model. ! The established model now contains 46 components and 0.045271 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=4.532 mas, bmaj=5.736 mas, bpa=-66.41 degrees ! Estimated noise=577.746 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 8.57395e-05 Jy ! Component: 100 - total flux cleaned = 6.58354e-05 Jy ! Component: 150 - total flux cleaned = 4.83237e-05 Jy ! Component: 200 - total flux cleaned = 4.04908e-05 Jy ! Total flux subtracted in 200 components = 4.04908e-05 Jy ! Clean residual min=-0.001608 max=0.001479 Jy/beam ! Clean residual mean=0.000004 rms=0.000391 Jy/beam ! Combined flux in latest and established models = 0.0453115 Jy selfcal ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 51 components and 0.0453115 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.077109Jy sigma=0.000661 ! Fit after self-cal, rms=0.077117Jy sigma=0.000660 wmodel J0814+5609_S_2017_10_21_pus_map.mod ! Writing 51 model components to file: J0814+5609_S_2017_10_21_pus_map.mod wobs J0814+5609_S_2017_10_21_pus_uvs.fits ! Writing UV FITS file: J0814+5609_S_2017_10_21_pus_uvs.fits wwins J0814+5609_S_2017_10_21_pus_map.win ! wwins: Wrote 1 windows to J0814+5609_S_2017_10_21_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000713471 Jy ! Component: 100 - total flux cleaned = -0.00116834 Jy ! Component: 150 - total flux cleaned = -0.00143897 Jy ! Component: 200 - total flux cleaned = -0.00171911 Jy ! Component: 250 - total flux cleaned = -0.00194201 Jy ! Component: 300 - total flux cleaned = -0.0021992 Jy ! Component: 350 - total flux cleaned = -0.0023643 Jy ! Component: 400 - total flux cleaned = -0.00260398 Jy ! Component: 450 - total flux cleaned = -0.00274012 Jy ! Component: 500 - total flux cleaned = -0.00279666 Jy ! Component: 550 - total flux cleaned = -0.00275975 Jy ! Component: 600 - total flux cleaned = -0.00277785 Jy ! Component: 650 - total flux cleaned = -0.00274257 Jy ! Component: 700 - total flux cleaned = -0.00272551 Jy ! Component: 750 - total flux cleaned = -0.00265816 Jy ! Component: 800 - total flux cleaned = -0.00269191 Jy ! Component: 850 - total flux cleaned = -0.0026755 Jy ! Component: 900 - total flux cleaned = -0.00265958 Jy ! Component: 950 - total flux cleaned = -0.00269142 Jy ! Component: 1000 - total flux cleaned = -0.00264474 Jy ! Component: 1050 - total flux cleaned = -0.00261427 Jy ! Component: 1100 - total flux cleaned = -0.00261456 Jy ! Component: 1150 - total flux cleaned = -0.00259965 Jy ! Component: 1200 - total flux cleaned = -0.00258499 Jy ! Component: 1250 - total flux cleaned = -0.0025419 Jy ! Component: 1300 - total flux cleaned = -0.00254205 Jy ! Component: 1350 - total flux cleaned = -0.00252779 Jy ! Component: 1400 - total flux cleaned = -0.00249999 Jy ! Component: 1450 - total flux cleaned = -0.0024866 Jy ! Component: 1500 - total flux cleaned = -0.00241973 Jy ! Component: 1550 - total flux cleaned = -0.00239331 Jy ! Component: 1600 - total flux cleaned = -0.00235433 Jy ! Component: 1650 - total flux cleaned = -0.00232882 Jy ! Component: 1700 - total flux cleaned = -0.00234147 Jy ! Component: 1750 - total flux cleaned = -0.00232894 Jy ! Component: 1800 - total flux cleaned = -0.002292 Jy ! Component: 1850 - total flux cleaned = -0.00227996 Jy ! Component: 1900 - total flux cleaned = -0.00229193 Jy ! Component: 1950 - total flux cleaned = -0.00229199 Jy ! Component: 2000 - total flux cleaned = -0.00229207 Jy ! Component: 2050 - total flux cleaned = -0.00232689 Jy ! Component: 2100 - total flux cleaned = -0.00231553 Jy ! Component: 2150 - total flux cleaned = -0.00236101 Jy ! Component: 2200 - total flux cleaned = -0.00234975 Jy ! Component: 2250 - total flux cleaned = -0.00231655 Jy ! Component: 2300 - total flux cleaned = -0.00231654 Jy ! Component: 2350 - total flux cleaned = -0.00229482 Jy ! Component: 2400 - total flux cleaned = -0.00231623 Jy ! Component: 2450 - total flux cleaned = -0.0022628 Jy ! Component: 2500 - total flux cleaned = -0.00228393 Jy ! Component: 2550 - total flux cleaned = -0.00224204 Jy ! Component: 2600 - total flux cleaned = -0.00223157 Jy ! Component: 2650 - total flux cleaned = -0.00219027 Jy ! Component: 2700 - total flux cleaned = -0.00216999 Jy ! Component: 2750 - total flux cleaned = -0.00213976 Jy ! Component: 2800 - total flux cleaned = -0.00212977 Jy ! Component: 2850 - total flux cleaned = -0.00210983 Jy ! Component: 2900 - total flux cleaned = -0.00209994 Jy ! Component: 2950 - total flux cleaned = -0.0020705 Jy ! Component: 3000 - total flux cleaned = -0.00208998 Jy ! Component: 3050 - total flux cleaned = -0.00205136 Jy ! Component: 3100 - total flux cleaned = -0.00207067 Jy ! Component: 3150 - total flux cleaned = -0.0020421 Jy ! Component: 3200 - total flux cleaned = -0.00205158 Jy ! Component: 3250 - total flux cleaned = -0.00207036 Jy ! Component: 3300 - total flux cleaned = -0.00205161 Jy ! Component: 3350 - total flux cleaned = -0.00206093 Jy ! Component: 3400 - total flux cleaned = -0.00204251 Jy ! Component: 3450 - total flux cleaned = -0.0020791 Jy ! Component: 3500 - total flux cleaned = -0.00205185 Jy ! Component: 3550 - total flux cleaned = -0.00206079 Jy ! Component: 3600 - total flux cleaned = -0.0020698 Jy ! Component: 3650 - total flux cleaned = -0.00206088 Jy ! Component: 3700 - total flux cleaned = -0.00204319 Jy ! Component: 3750 - total flux cleaned = -0.00205203 Jy ! Component: 3800 - total flux cleaned = -0.00199952 Jy ! Component: 3850 - total flux cleaned = -0.00199085 Jy ! Component: 3900 - total flux cleaned = -0.00197353 Jy ! Component: 3950 - total flux cleaned = -0.00194764 Jy ! Component: 4000 - total flux cleaned = -0.00191336 Jy ! Component: 4050 - total flux cleaned = -0.0018963 Jy ! Total flux subtracted in 4096 components = -0.00186234 Jy ! Clean residual min=-0.000568 max=0.000566 Jy/beam ! Clean residual mean=-0.000001 rms=0.000154 Jy/beam ! Combined flux in latest and established models = 0.0434491 Jy keep ! Adding 269 model components to the UV plane model. ! The established model now contains 320 components and 0.0434491 Jy ![Exited script file: muppet] wmap "J0814+5609_S_2017_10_21_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.532 x 5.736 at -66.41 degrees (North through East) ! Clean map min=-0.0012105 max=0.04006 Jy/beam ! Writing clean map to FITS file: J0814+5609_S_2017_10_21_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.04006 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000151654 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -1.1357 1.1357 2.27141 4.54282 9.08563 18.1713 36.3425 72.685 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0004 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.04 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.532 x 5.736 at -66.41 degrees (North through East) ! Clean map min=-0.0012105 max=0.04006 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J0814+5609_S_2017_10_21_pus_uvs.log closed on Sat May 11 20:54:04 2019