! Started logfile: J0811-4929_S_2017_03_27_pus_uvs.log on Sun Apr 28 14:36:52 2019 obs J0811-4929_S_2017_03_27_pus_uva.fits ! Reading UV FITS file: J0811-4929_S_2017_03_27_pus_uva.fits ! AN table 1: 145 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.223295 visibilities/baseline/integration-bin. ! *** This seems a bit low - see "help observe" on the binwid argument. ! Found source: J0811-4929 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 1684 lines of history. ! ! Reading 5828 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J0811-4929_S_2017_03_27_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 883 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 866 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 940 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 1200 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.780954Jy sigma=0.004013 ! Fit after self-cal, rms=0.765853Jy sigma=0.003922 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.169 mas, bmaj=7.269 mas, bpa=-3.456 degrees ! Estimated noise=6701.92 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.135366 Jy ! Component: 100 - total flux cleaned = 0.188181 Jy ! Total flux subtracted in 100 components = 0.188181 Jy ! Clean residual min=-0.025391 max=0.040187 Jy/beam ! Clean residual mean=-0.001566 rms=0.009334 Jy/beam ! Combined flux in latest and established models = 0.188181 Jy ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 8 components and 0.188181 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.184413Jy sigma=0.000933 ! Fit after self-cal, rms=0.184364Jy sigma=0.000933 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=4.148 mas, bmaj=13.04 mas, bpa=0.6477 degrees ! Estimated noise=2480.41 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.08274 Jy ! Component: 100 - total flux cleaned = 0.110023 Jy ! Component: 150 - total flux cleaned = 0.119103 Jy ! Component: 200 - total flux cleaned = 0.12168 Jy ! Total flux subtracted in 200 components = 0.12168 Jy ! Clean residual min=-0.022139 max=0.032701 Jy/beam ! Clean residual mean=-0.001605 rms=0.009168 Jy/beam ! Combined flux in latest and established models = 0.30986 Jy ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 30 components and 0.30986 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.151971Jy sigma=0.000753 ! Fit after self-cal, rms=0.151847Jy sigma=0.000751 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! A total of 60 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.98 HN 1.00* KP 1.31 ! LA 0.96 MK 0.95 NL 1.00* OV 1.00* ! PT 0.91 SC 0.99 ! ! ! Correcting IF 2. ! A total of 42 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.02 HN 1.00* KP 1.36 ! LA 0.97 MK 1.08 NL 1.00* OV 1.00* ! PT 0.87 SC 1.29 ! ! ! Correcting IF 3. ! A total of 156 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.04 HN 1.00* KP 1.22 ! LA 0.85 MK 1.07 NL 1.00* OV 1.00* ! PT 0.86 SC 1.07 ! ! ! Correcting IF 4. ! A total of 222 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.01 HN 1.00* KP 1.00* ! LA 0.99 MK 0.60 NL 1.00* OV 1.00* ! PT 0.86 SC 0.55 ! ! ! Fit before self-cal, rms=0.151847Jy sigma=0.000751 ! Fit after self-cal, rms=0.157438Jy sigma=0.000716 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.967 mas, bmaj=12.45 mas, bpa=0.8584 degrees ! Estimated noise=2802.29 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00135532 Jy ! Component: 100 - total flux cleaned = -0.00144694 Jy ! Component: 150 - total flux cleaned = -0.0014559 Jy ! Component: 200 - total flux cleaned = -0.0014657 Jy ! Total flux subtracted in 200 components = -0.0014657 Jy ! Clean residual min=-0.015982 max=0.014525 Jy/beam ! Clean residual mean=-0.000171 rms=0.005252 Jy/beam ! Combined flux in latest and established models = 0.308395 Jy ! Performing phase self-cal ! Adding 5 model components to the UV plane model. ! The established model now contains 34 components and 0.308395 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.157330Jy sigma=0.000715 ! Fit after self-cal, rms=0.158290Jy sigma=0.000714 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.158290Jy sigma=0.000714 ! Fit after self-cal, rms=0.162544Jy sigma=0.000711 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=4.022 mas, bmaj=12.59 mas, bpa=0.9326 degrees ! Estimated noise=2844.91 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00124617 Jy ! Component: 100 - total flux cleaned = 0.00116404 Jy ! Component: 150 - total flux cleaned = 0.00115615 Jy ! Component: 200 - total flux cleaned = 0.00114157 Jy ! Total flux subtracted in 200 components = 0.00114157 Jy ! Clean residual min=-0.015582 max=0.015121 Jy/beam ! Clean residual mean=-0.000129 rms=0.005158 Jy/beam ! Combined flux in latest and established models = 0.309536 Jy selfcal ! Performing phase self-cal ! Adding 6 model components to the UV plane model. ! The established model now contains 34 components and 0.309536 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.162456Jy sigma=0.000711 ! Fit after self-cal, rms=0.162610Jy sigma=0.000711 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -7.80691e-06 Jy ! Component: 100 - total flux cleaned = -8.00546e-05 Jy ! Component: 150 - total flux cleaned = -8.81967e-05 Jy ! Component: 200 - total flux cleaned = -0.00010171 Jy ! Total flux subtracted in 200 components = -0.00010171 Jy ! Clean residual min=-0.015547 max=0.015084 Jy/beam ! Clean residual mean=-0.000134 rms=0.005160 Jy/beam ! Combined flux in latest and established models = 0.309435 Jy ! Performing phase self-cal ! Adding 5 model components to the UV plane model. ! The established model now contains 34 components and 0.309435 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.162553Jy sigma=0.000711 ! Fit after self-cal, rms=0.162561Jy sigma=0.000711 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.162561Jy sigma=0.000711 ! Fit after self-cal, rms=0.163282Jy sigma=0.000702 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.961 mas, bmaj=12.3 mas, bpa=1.636 degrees ! Estimated noise=2813.52 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -1.00637e-06 Jy ! Component: 100 - total flux cleaned = -3.00966e-05 Jy ! Component: 150 - total flux cleaned = -5.09034e-05 Jy ! Component: 200 - total flux cleaned = -4.65409e-05 Jy ! Total flux subtracted in 200 components = -4.65409e-05 Jy ! Clean residual min=-0.011464 max=0.014345 Jy/beam ! Clean residual mean=-0.000044 rms=0.004520 Jy/beam ! Combined flux in latest and established models = 0.309388 Jy selfcal ! Performing phase self-cal ! Adding 6 model components to the UV plane model. ! The established model now contains 40 components and 0.309388 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.163271Jy sigma=0.000702 ! Fit after self-cal, rms=0.163506Jy sigma=0.000702 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -4.91642e-05 Jy ! Component: 100 - total flux cleaned = -6.38433e-05 Jy ! Component: 150 - total flux cleaned = -6.46408e-05 Jy ! Component: 200 - total flux cleaned = -6.74061e-05 Jy ! Total flux subtracted in 200 components = -6.74061e-05 Jy ! Clean residual min=-0.011301 max=0.014408 Jy/beam ! Clean residual mean=-0.000048 rms=0.004549 Jy/beam ! Combined flux in latest and established models = 0.309321 Jy ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 44 components and 0.309321 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.163500Jy sigma=0.000702 ! Fit after self-cal, rms=0.163501Jy sigma=0.000702 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.163501Jy sigma=0.000702 ! Fit after self-cal, rms=0.162875Jy sigma=0.000702 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=15.06 mas, bmaj=57.52 mas, bpa=3.287 degrees ! Estimated noise=3203.73 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000360935 Jy ! Component: 100 - total flux cleaned = 0.00035989 Jy ! Component: 150 - total flux cleaned = 0.000359706 Jy ! Component: 200 - total flux cleaned = 0.000359713 Jy ! Total flux subtracted in 200 components = 0.000359713 Jy ! Clean residual min=-0.012622 max=0.017501 Jy/beam ! Clean residual mean=-0.000040 rms=0.006073 Jy/beam ! Combined flux in latest and established models = 0.30968 Jy selfcal ! Performing phase self-cal ! Adding 3 model components to the UV plane model. ! The established model now contains 47 components and 0.30968 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.162880Jy sigma=0.000702 ! Fit after self-cal, rms=0.162898Jy sigma=0.000702 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 1.14077e-05 Jy ! Component: 100 - total flux cleaned = 1.15597e-05 Jy ! Component: 150 - total flux cleaned = 1.15444e-05 Jy ! Component: 200 - total flux cleaned = 1.14929e-05 Jy ! Total flux subtracted in 200 components = 1.14929e-05 Jy ! Clean residual min=-0.012606 max=0.017518 Jy/beam ! Clean residual mean=-0.000039 rms=0.006074 Jy/beam ! Combined flux in latest and established models = 0.309692 Jy ! Performing phase self-cal ! Adding 3 model components to the UV plane model. ! The established model now contains 47 components and 0.309692 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.162901Jy sigma=0.000702 ! Fit after self-cal, rms=0.162902Jy sigma=0.000702 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.939 mas, bmaj=12.28 mas, bpa=1.817 degrees ! Estimated noise=2800.4 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.939 x 12.28 at 1.817 degrees (North through East) ! Clean map min=-0.011074 max=0.22768 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.115 mas, bmaj=7.248 mas, bpa=-2.206 degrees ! Estimated noise=6775.15 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.126754 Jy ! Component: 100 - total flux cleaned = 0.183133 Jy ! Component: 150 - total flux cleaned = 0.218601 Jy ! Component: 200 - total flux cleaned = 0.242878 Jy ! Total flux subtracted in 200 components = 0.242878 Jy ! Clean residual min=-0.017633 max=0.021698 Jy/beam ! Clean residual mean=-0.000687 rms=0.005555 Jy/beam ! Combined flux in latest and established models = 0.242878 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 21 model components to the UV plane model. ! The established model now contains 21 components and 0.242878 Jy ! Inverting map and beam ! Estimated beam: bmin=3.939 mas, bmaj=12.28 mas, bpa=1.817 degrees ! Estimated noise=2800.4 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0435803 Jy ! Component: 100 - total flux cleaned = 0.0585122 Jy ! Component: 150 - total flux cleaned = 0.0636615 Jy ! Component: 200 - total flux cleaned = 0.0647442 Jy ! Total flux subtracted in 200 components = 0.0647442 Jy ! Clean residual min=-0.011717 max=0.013665 Jy/beam ! Clean residual mean=-0.000097 rms=0.004597 Jy/beam ! Combined flux in latest and established models = 0.307622 Jy ! Adding 15 model components to the UV plane model. ! The established model now contains 34 components and 0.307622 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=15.06 mas, bmaj=57.52 mas, bpa=3.287 degrees ! Estimated noise=3203.73 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00166025 Jy ! Component: 100 - total flux cleaned = 0.00194891 Jy ! Component: 150 - total flux cleaned = 0.00194929 Jy ! Component: 200 - total flux cleaned = 0.00194871 Jy ! Total flux subtracted in 200 components = 0.00194871 Jy ! Clean residual min=-0.012599 max=0.017613 Jy/beam ! Clean residual mean=-0.000041 rms=0.006077 Jy/beam ! Combined flux in latest and established models = 0.309571 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -1.02406e-06 Jy ! Component: 100 - total flux cleaned = -2.15826e-06 Jy ! Component: 150 - total flux cleaned = -3.30778e-06 Jy ! Component: 200 - total flux cleaned = -4.07162e-06 Jy ! Total flux subtracted in 200 components = -4.07162e-06 Jy ! Clean residual min=-0.012599 max=0.017606 Jy/beam ! Clean residual mean=-0.000041 rms=0.006077 Jy/beam ! Combined flux in latest and established models = 0.309567 Jy ! Adding 5 model components to the UV plane model. ! The established model now contains 37 components and 0.309567 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.939 mas, bmaj=12.28 mas, bpa=1.817 degrees ! Estimated noise=2800.4 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.0016055 Jy ! Component: 100 - total flux cleaned = -0.00160286 Jy ! Component: 150 - total flux cleaned = -0.00159774 Jy ! Component: 200 - total flux cleaned = -0.00159281 Jy ! Total flux subtracted in 200 components = -0.00159281 Jy ! Clean residual min=-0.011618 max=0.013645 Jy/beam ! Clean residual mean=-0.000085 rms=0.004572 Jy/beam ! Combined flux in latest and established models = 0.307974 Jy selfcal ! Performing phase self-cal ! Adding 6 model components to the UV plane model. ! The established model now contains 39 components and 0.307974 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.163041Jy sigma=0.000702 ! Fit after self-cal, rms=0.162990Jy sigma=0.000702 wmodel J0811-4929_S_2017_03_27_pus_map.mod ! Writing 39 model components to file: J0811-4929_S_2017_03_27_pus_map.mod wobs J0811-4929_S_2017_03_27_pus_uvs.fits ! Writing UV FITS file: J0811-4929_S_2017_03_27_pus_uvs.fits wwins J0811-4929_S_2017_03_27_pus_map.win ! wwins: Wrote 1 windows to J0811-4929_S_2017_03_27_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.00481683 Jy ! Component: 100 - total flux cleaned = 0.00659833 Jy ! Component: 150 - total flux cleaned = 0.00883013 Jy ! Component: 200 - total flux cleaned = 0.00947485 Jy ! Component: 250 - total flux cleaned = 0.00892095 Jy ! Component: 300 - total flux cleaned = 0.00904415 Jy ! Component: 350 - total flux cleaned = 0.00868874 Jy ! Component: 400 - total flux cleaned = 0.00825917 Jy ! Component: 450 - total flux cleaned = 0.00773896 Jy ! Component: 500 - total flux cleaned = 0.00695254 Jy ! Component: 550 - total flux cleaned = 0.00630355 Jy ! Component: 600 - total flux cleaned = 0.0057715 Jy ! Component: 650 - total flux cleaned = 0.00493435 Jy ! Component: 700 - total flux cleaned = 0.00437958 Jy ! Component: 750 - total flux cleaned = 0.00385031 Jy ! Component: 800 - total flux cleaned = 0.00313433 Jy ! Component: 850 - total flux cleaned = 0.00252282 Jy ! Component: 900 - total flux cleaned = 0.00187549 Jy ! Component: 950 - total flux cleaned = 0.00162654 Jy ! Component: 1000 - total flux cleaned = 0.00150502 Jy ! Component: 1050 - total flux cleaned = 0.00127065 Jy ! Component: 1100 - total flux cleaned = 0.00132862 Jy ! Component: 1150 - total flux cleaned = 0.00115971 Jy ! Component: 1200 - total flux cleaned = 0.00104775 Jy ! Component: 1250 - total flux cleaned = 0.000774457 Jy ! Component: 1300 - total flux cleaned = 0.000612399 Jy ! Component: 1350 - total flux cleaned = 0.000346643 Jy ! Component: 1400 - total flux cleaned = 0.000137503 Jy ! Component: 1450 - total flux cleaned = 8.59411e-05 Jy ! Component: 1500 - total flux cleaned = -0.000119276 Jy ! Component: 1550 - total flux cleaned = -0.000322067 Jy ! Component: 1600 - total flux cleaned = -0.000522762 Jy ! Component: 1650 - total flux cleaned = -0.00082148 Jy ! Component: 1700 - total flux cleaned = -0.00101954 Jy ! Component: 1750 - total flux cleaned = -0.00126542 Jy ! Component: 1800 - total flux cleaned = -0.00146034 Jy ! Component: 1850 - total flux cleaned = -0.00170249 Jy ! Component: 1900 - total flux cleaned = -0.00194355 Jy ! Component: 1950 - total flux cleaned = -0.00218377 Jy ! Component: 2000 - total flux cleaned = -0.00251884 Jy ! Component: 2050 - total flux cleaned = -0.00266194 Jy ! Component: 2100 - total flux cleaned = -0.00285214 Jy ! Component: 2150 - total flux cleaned = -0.00308954 Jy ! Component: 2200 - total flux cleaned = -0.0033261 Jy ! Component: 2250 - total flux cleaned = -0.00356205 Jy ! Component: 2300 - total flux cleaned = -0.00360921 Jy ! Component: 2350 - total flux cleaned = -0.0038453 Jy ! Component: 2400 - total flux cleaned = -0.00393951 Jy ! Component: 2450 - total flux cleaned = -0.00403391 Jy ! Component: 2500 - total flux cleaned = -0.00422233 Jy ! Component: 2550 - total flux cleaned = -0.00431622 Jy ! Component: 2600 - total flux cleaned = -0.00445741 Jy ! Component: 2650 - total flux cleaned = -0.00459886 Jy ! Component: 2700 - total flux cleaned = -0.00474031 Jy ! Component: 2750 - total flux cleaned = -0.00483467 Jy ! Component: 2800 - total flux cleaned = -0.00474026 Jy ! Component: 2850 - total flux cleaned = -0.00478723 Jy ! Component: 2900 - total flux cleaned = -0.00483466 Jy ! Component: 2950 - total flux cleaned = -0.00478734 Jy ! Component: 3000 - total flux cleaned = -0.00473966 Jy ! Component: 3050 - total flux cleaned = -0.00464408 Jy ! Component: 3100 - total flux cleaned = -0.00469201 Jy ! Component: 3150 - total flux cleaned = -0.00459605 Jy ! Component: 3200 - total flux cleaned = -0.00440296 Jy ! Component: 3250 - total flux cleaned = -0.00430639 Jy ! Component: 3300 - total flux cleaned = -0.00425768 Jy ! Component: 3350 - total flux cleaned = -0.00415993 Jy ! Component: 3400 - total flux cleaned = -0.00406139 Jy ! Component: 3450 - total flux cleaned = -0.003963 Jy ! Component: 3500 - total flux cleaned = -0.00396284 Jy ! Component: 3550 - total flux cleaned = -0.00381412 Jy ! Component: 3600 - total flux cleaned = -0.00371461 Jy ! Component: 3650 - total flux cleaned = -0.00351401 Jy ! Component: 3700 - total flux cleaned = -0.00341312 Jy ! Component: 3750 - total flux cleaned = -0.00341344 Jy ! Component: 3800 - total flux cleaned = -0.00331163 Jy ! Component: 3850 - total flux cleaned = -0.0033119 Jy ! Component: 3900 - total flux cleaned = -0.00320914 Jy ! Component: 3950 - total flux cleaned = -0.00310533 Jy ! Component: 4000 - total flux cleaned = -0.00300071 Jy ! Component: 4050 - total flux cleaned = -0.00279113 Jy ! Total flux subtracted in 4096 components = -0.00268587 Jy ! Clean residual min=-0.002986 max=0.003101 Jy/beam ! Clean residual mean=-0.000134 rms=0.001116 Jy/beam ! Combined flux in latest and established models = 0.305288 Jy keep ! Adding 176 model components to the UV plane model. ! The established model now contains 215 components and 0.305288 Jy ![Exited script file: muppet] wmap "J0811-4929_S_2017_03_27_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.939 x 12.28 at 1.817 degrees (North through East) ! Clean map min=-0.011811 max=0.23378 Jy/beam ! Writing clean map to FITS file: J0811-4929_S_2017_03_27_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.233779 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.00154823 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -1.98679 1.98679 3.97357 7.94714 15.8943 31.7886 63.5772 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0046 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.233 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.939 x 12.28 at 1.817 degrees (North through East) ! Clean map min=-0.011811 max=0.23378 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J0811-4929_S_2017_03_27_pus_uvs.log closed on Sun Apr 28 14:36:57 2019