! Started logfile: J0810-1321_S_2017_10_09_pus_uvs.log on Sun May 12 13:07:54 2019 obs J0810-1321_S_2017_10_09_pus_uva.fits ! Reading UV FITS file: J0810-1321_S_2017_10_09_pus_uva.fits ! AN table 1: 146 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.759323 visibilities/baseline/integration-bin. ! Found source: J0810-1321 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 496 lines of history. ! ! Reading 15964 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J0810-1321_S_2017_10_09_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 161 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 234 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 234 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 750 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.971747Jy sigma=0.008259 ! Fit after self-cal, rms=0.936950Jy sigma=0.007977 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.53 mas, bmaj=13.68 mas, bpa=-18.78 degrees ! Estimated noise=1031.13 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.044146 Jy ! Component: 100 - total flux cleaned = 0.0597152 Jy ! Total flux subtracted in 100 components = 0.0597152 Jy ! Clean residual min=-0.006687 max=0.009327 Jy/beam ! Clean residual mean=0.000011 rms=0.002129 Jy/beam ! Combined flux in latest and established models = 0.0597152 Jy ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 28 components and 0.0597152 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.091312Jy sigma=0.000726 ! Fit after self-cal, rms=0.090887Jy sigma=0.000722 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.036 mas, bmaj=14.79 mas, bpa=-18.36 degrees ! Estimated noise=777.399 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0205437 Jy ! Component: 100 - total flux cleaned = 0.033672 Jy ! Component: 150 - total flux cleaned = 0.0422136 Jy ! Component: 200 - total flux cleaned = 0.0481858 Jy ! Total flux subtracted in 200 components = 0.0481858 Jy ! Clean residual min=-0.005072 max=0.009212 Jy/beam ! Clean residual mean=0.000005 rms=0.002115 Jy/beam ! Combined flux in latest and established models = 0.107901 Jy ! Performing phase self-cal ! Adding 78 model components to the UV plane model. ! The established model now contains 99 components and 0.107901 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.085256Jy sigma=0.000676 ! Fit after self-cal, rms=0.084826Jy sigma=0.000673 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.96 FD 1.19 HN 1.32 KP 0.93 ! LA 0.90 MK 1.18 NL 0.96 OV 1.00* ! PT 0.84 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.09 FD 1.29 HN 1.18 KP 0.92 ! LA 0.86 MK 1.14 NL 1.14 OV 1.00* ! PT 0.84 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.85 FD 1.28 HN 1.27 KP 0.76 ! LA 0.70 MK 1.16 NL 1.20 OV 1.00* ! PT 0.83 ! ! ! Correcting IF 4. ! A total of 12 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.11 HN 0.78 KP 1.00* ! LA 1.00* MK 0.77 NL 1.00* OV 1.00* ! PT 0.96 ! ! ! Fit before self-cal, rms=0.084826Jy sigma=0.000673 ! Fit after self-cal, rms=0.086894Jy sigma=0.000655 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.182 mas, bmaj=15.06 mas, bpa=-18.35 degrees ! Estimated noise=772.526 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-8.5, 34). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00420616 Jy ! Component: 100 - total flux cleaned = 0.00525631 Jy ! Component: 150 - total flux cleaned = 0.00532585 Jy ! Component: 200 - total flux cleaned = 0.00545746 Jy ! Total flux subtracted in 200 components = 0.00545746 Jy ! Clean residual min=-0.002814 max=0.002980 Jy/beam ! Clean residual mean=0.000006 rms=0.000763 Jy/beam ! Combined flux in latest and established models = 0.113358 Jy ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 125 components and 0.113358 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.086615Jy sigma=0.000653 ! Fit after self-cal, rms=0.087004Jy sigma=0.000651 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.087004Jy sigma=0.000651 ! Fit after self-cal, rms=0.085801Jy sigma=0.000650 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.177 mas, bmaj=14.91 mas, bpa=-18.38 degrees ! Estimated noise=758.613 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00176833 Jy ! Component: 100 - total flux cleaned = 0.00150115 Jy ! Component: 150 - total flux cleaned = 0.0011385 Jy ! Component: 200 - total flux cleaned = 0.000853246 Jy ! Total flux subtracted in 200 components = 0.000853246 Jy ! Clean residual min=-0.002098 max=0.001954 Jy/beam ! Clean residual mean=0.000003 rms=0.000550 Jy/beam ! Combined flux in latest and established models = 0.114212 Jy selfcal ! Performing phase self-cal ! Adding 35 model components to the UV plane model. ! The established model now contains 156 components and 0.114212 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.085703Jy sigma=0.000649 ! Fit after self-cal, rms=0.085707Jy sigma=0.000649 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000406914 Jy ! Component: 100 - total flux cleaned = 8.44581e-05 Jy ! Component: 150 - total flux cleaned = -8.16061e-05 Jy ! Component: 200 - total flux cleaned = -0.00019534 Jy ! Total flux subtracted in 200 components = -0.00019534 Jy ! Clean residual min=-0.002072 max=0.002081 Jy/beam ! Clean residual mean=0.000004 rms=0.000562 Jy/beam ! Combined flux in latest and established models = 0.114016 Jy ! Performing phase self-cal ! Adding 31 model components to the UV plane model. ! The established model now contains 171 components and 0.114016 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.085644Jy sigma=0.000649 ! Fit after self-cal, rms=0.085600Jy sigma=0.000648 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.085600Jy sigma=0.000648 ! Fit after self-cal, rms=0.084404Jy sigma=0.000648 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.172 mas, bmaj=14.82 mas, bpa=-18.35 degrees ! Estimated noise=747.62 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000522745 Jy ! Component: 100 - total flux cleaned = 0.00035058 Jy ! Component: 150 - total flux cleaned = 0.000202112 Jy ! Component: 200 - total flux cleaned = 6.77571e-05 Jy ! Total flux subtracted in 200 components = 6.77571e-05 Jy ! Clean residual min=-0.001903 max=0.001941 Jy/beam ! Clean residual mean=0.000002 rms=0.000529 Jy/beam ! Combined flux in latest and established models = 0.114084 Jy selfcal ! Performing phase self-cal ! Adding 44 model components to the UV plane model. ! The established model now contains 192 components and 0.114084 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.084347Jy sigma=0.000648 ! Fit after self-cal, rms=0.084315Jy sigma=0.000648 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00020371 Jy ! Component: 100 - total flux cleaned = 4.75631e-05 Jy ! Component: 150 - total flux cleaned = -9.08082e-05 Jy ! Component: 200 - total flux cleaned = -0.00018456 Jy ! Total flux subtracted in 200 components = -0.00018456 Jy ! Clean residual min=-0.001924 max=0.001961 Jy/beam ! Clean residual mean=0.000002 rms=0.000531 Jy/beam ! Combined flux in latest and established models = 0.1139 Jy ! Performing phase self-cal ! Adding 33 model components to the UV plane model. ! The established model now contains 208 components and 0.1139 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.084273Jy sigma=0.000648 ! Fit after self-cal, rms=0.084247Jy sigma=0.000647 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.084247Jy sigma=0.000647 ! Fit after self-cal, rms=0.083646Jy sigma=0.000647 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.698 mas, bmaj=17.28 mas, bpa=-7.864 degrees ! Estimated noise=890.182 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000278405 Jy ! Component: 100 - total flux cleaned = 1.71486e-05 Jy ! Component: 150 - total flux cleaned = -0.000112066 Jy ! Component: 200 - total flux cleaned = -0.000168923 Jy ! Total flux subtracted in 200 components = -0.000168923 Jy ! Clean residual min=-0.001891 max=0.002664 Jy/beam ! Clean residual mean=0.000004 rms=0.000607 Jy/beam ! Combined flux in latest and established models = 0.113731 Jy selfcal ! Performing phase self-cal ! Adding 34 model components to the UV plane model. ! The established model now contains 233 components and 0.113731 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.083611Jy sigma=0.000647 ! Fit after self-cal, rms=0.083605Jy sigma=0.000647 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000146666 Jy ! Component: 100 - total flux cleaned = -0.000350366 Jy ! Component: 150 - total flux cleaned = -0.000376671 Jy ! Component: 200 - total flux cleaned = -0.000425115 Jy ! Total flux subtracted in 200 components = -0.000425115 Jy ! Clean residual min=-0.001931 max=0.002611 Jy/beam ! Clean residual mean=0.000003 rms=0.000611 Jy/beam ! Combined flux in latest and established models = 0.113306 Jy ! Performing phase self-cal ! Adding 38 model components to the UV plane model. ! The established model now contains 254 components and 0.113305 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.083584Jy sigma=0.000647 ! Fit after self-cal, rms=0.083571Jy sigma=0.000647 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.166 mas, bmaj=14.78 mas, bpa=-18.33 degrees ! Estimated noise=740.832 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.166 x 14.78 at -18.33 degrees (North through East) ! Clean map min=-0.0032168 max=0.059967 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.613 mas, bmaj=13.5 mas, bpa=-18.69 degrees ! Estimated noise=1012.51 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0430793 Jy ! Component: 100 - total flux cleaned = 0.0601812 Jy ! Component: 150 - total flux cleaned = 0.0726317 Jy ! Component: 200 - total flux cleaned = 0.0821999 Jy ! Total flux subtracted in 200 components = 0.0821999 Jy ! Clean residual min=-0.005338 max=0.007102 Jy/beam ! Clean residual mean=0.000004 rms=0.001470 Jy/beam ! Combined flux in latest and established models = 0.0821999 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 28 model components to the UV plane model. ! The established model now contains 28 components and 0.0821999 Jy ! Inverting map and beam ! Estimated beam: bmin=3.166 mas, bmaj=14.78 mas, bpa=-18.33 degrees ! Estimated noise=740.832 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (6.5, -10.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0111152 Jy ! Component: 100 - total flux cleaned = 0.0181155 Jy ! Component: 150 - total flux cleaned = 0.0229472 Jy ! Component: 200 - total flux cleaned = 0.0262105 Jy ! Total flux subtracted in 200 components = 0.0262105 Jy ! Clean residual min=-0.002910 max=0.002898 Jy/beam ! Clean residual mean=0.000004 rms=0.000776 Jy/beam ! Combined flux in latest and established models = 0.10841 Jy ! Adding 61 model components to the UV plane model. ! The established model now contains 83 components and 0.10841 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.698 mas, bmaj=17.28 mas, bpa=-7.864 degrees ! Estimated noise=890.182 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00267868 Jy ! Component: 100 - total flux cleaned = 0.00355031 Jy ! Component: 150 - total flux cleaned = 0.00411345 Jy ! Component: 200 - total flux cleaned = 0.00452045 Jy ! Total flux subtracted in 200 components = 0.00452045 Jy ! Clean residual min=-0.002410 max=0.002447 Jy/beam ! Clean residual mean=0.000005 rms=0.000727 Jy/beam ! Combined flux in latest and established models = 0.112931 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000296677 Jy ! Component: 100 - total flux cleaned = 0.000402229 Jy ! Component: 150 - total flux cleaned = 0.00049902 Jy ! Component: 200 - total flux cleaned = 0.000544069 Jy ! Total flux subtracted in 200 components = 0.000544069 Jy ! Clean residual min=-0.002163 max=0.002326 Jy/beam ! Clean residual mean=0.000005 rms=0.000660 Jy/beam ! Combined flux in latest and established models = 0.113475 Jy ! Adding 82 model components to the UV plane model. ! The established model now contains 155 components and 0.113475 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.166 mas, bmaj=14.78 mas, bpa=-18.33 degrees ! Estimated noise=740.832 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000594431 Jy ! Component: 100 - total flux cleaned = 0.000340485 Jy ! Component: 150 - total flux cleaned = 0.000506818 Jy ! Component: 200 - total flux cleaned = 0.000601248 Jy ! Total flux subtracted in 200 components = 0.000601248 Jy ! Clean residual min=-0.001896 max=0.001987 Jy/beam ! Clean residual mean=0.000002 rms=0.000531 Jy/beam ! Combined flux in latest and established models = 0.114076 Jy selfcal ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 181 components and 0.114076 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.083579Jy sigma=0.000647 ! Fit after self-cal, rms=0.083504Jy sigma=0.000647 wmodel J0810-1321_S_2017_10_09_pus_map.mod ! Writing 181 model components to file: J0810-1321_S_2017_10_09_pus_map.mod wobs J0810-1321_S_2017_10_09_pus_uvs.fits ! Writing UV FITS file: J0810-1321_S_2017_10_09_pus_uvs.fits wwins J0810-1321_S_2017_10_09_pus_map.win ! wwins: Wrote 3 windows to J0810-1321_S_2017_10_09_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000413122 Jy ! Component: 100 - total flux cleaned = -0.000542279 Jy ! Component: 150 - total flux cleaned = -0.000690514 Jy ! Component: 200 - total flux cleaned = -0.00089094 Jy ! Component: 250 - total flux cleaned = -0.00111208 Jy ! Component: 300 - total flux cleaned = -0.0014054 Jy ! Component: 350 - total flux cleaned = -0.00168984 Jy ! Component: 400 - total flux cleaned = -0.00194198 Jy ! Component: 450 - total flux cleaned = -0.00218761 Jy ! Component: 500 - total flux cleaned = -0.00235546 Jy ! Component: 550 - total flux cleaned = -0.00254267 Jy ! Component: 600 - total flux cleaned = -0.00270232 Jy ! Component: 650 - total flux cleaned = -0.00283634 Jy ! Component: 700 - total flux cleaned = -0.00301048 Jy ! Component: 750 - total flux cleaned = -0.00313806 Jy ! Component: 800 - total flux cleaned = -0.00330455 Jy ! Component: 850 - total flux cleaned = -0.00346774 Jy ! Component: 900 - total flux cleaned = -0.00362753 Jy ! Component: 950 - total flux cleaned = -0.00378422 Jy ! Component: 1000 - total flux cleaned = -0.00391826 Jy ! Component: 1050 - total flux cleaned = -0.00395594 Jy ! Component: 1100 - total flux cleaned = -0.00402997 Jy ! Component: 1150 - total flux cleaned = -0.00404798 Jy ! Component: 1200 - total flux cleaned = -0.00404832 Jy ! Component: 1250 - total flux cleaned = -0.00413663 Jy ! Component: 1300 - total flux cleaned = -0.00410145 Jy ! Component: 1350 - total flux cleaned = -0.00411849 Jy ! Component: 1400 - total flux cleaned = -0.00415204 Jy ! Component: 1450 - total flux cleaned = -0.00411864 Jy ! Component: 1500 - total flux cleaned = -0.00408591 Jy ! Component: 1550 - total flux cleaned = -0.00410245 Jy ! Component: 1600 - total flux cleaned = -0.00411851 Jy ! Component: 1650 - total flux cleaned = -0.00411855 Jy ! Component: 1700 - total flux cleaned = -0.0040879 Jy ! Component: 1750 - total flux cleaned = -0.00411826 Jy ! Component: 1800 - total flux cleaned = -0.00404339 Jy ! Component: 1850 - total flux cleaned = -0.00410298 Jy ! Component: 1900 - total flux cleaned = -0.00401526 Jy ! Component: 1950 - total flux cleaned = -0.00404416 Jy ! Component: 2000 - total flux cleaned = -0.00400139 Jy ! Component: 2050 - total flux cleaned = -0.00398724 Jy ! Component: 2100 - total flux cleaned = -0.00395947 Jy ! Component: 2150 - total flux cleaned = -0.00394573 Jy ! Component: 2200 - total flux cleaned = -0.00386427 Jy ! Component: 2250 - total flux cleaned = -0.00382399 Jy ! Component: 2300 - total flux cleaned = -0.00379765 Jy ! Component: 2350 - total flux cleaned = -0.00378453 Jy ! Component: 2400 - total flux cleaned = -0.00371951 Jy ! Component: 2450 - total flux cleaned = -0.00361706 Jy ! Component: 2500 - total flux cleaned = -0.0035663 Jy ! Component: 2550 - total flux cleaned = -0.00352863 Jy ! Component: 2600 - total flux cleaned = -0.00347873 Jy ! Component: 2650 - total flux cleaned = -0.00345408 Jy ! Component: 2700 - total flux cleaned = -0.00338065 Jy ! Component: 2750 - total flux cleaned = -0.00332028 Jy ! Component: 2800 - total flux cleaned = -0.00328433 Jy ! Component: 2850 - total flux cleaned = -0.00322485 Jy ! Component: 2900 - total flux cleaned = -0.00309572 Jy ! Component: 2950 - total flux cleaned = -0.00304929 Jy ! Component: 3000 - total flux cleaned = -0.00295735 Jy ! Component: 3050 - total flux cleaned = -0.00286629 Jy ! Component: 3100 - total flux cleaned = -0.00285511 Jy ! Component: 3150 - total flux cleaned = -0.00274318 Jy ! Component: 3200 - total flux cleaned = -0.00270998 Jy ! Component: 3250 - total flux cleaned = -0.00264396 Jy ! Component: 3300 - total flux cleaned = -0.00263295 Jy ! Component: 3350 - total flux cleaned = -0.00253553 Jy ! Component: 3400 - total flux cleaned = -0.00248183 Jy ! Component: 3450 - total flux cleaned = -0.00242853 Jy ! Component: 3500 - total flux cleaned = -0.00242865 Jy ! Component: 3550 - total flux cleaned = -0.00238674 Jy ! Component: 3600 - total flux cleaned = -0.00231363 Jy ! Component: 3650 - total flux cleaned = -0.00229291 Jy ! Component: 3700 - total flux cleaned = -0.00221067 Jy ! Component: 3750 - total flux cleaned = -0.00218005 Jy ! Component: 3800 - total flux cleaned = -0.00211935 Jy ! Component: 3850 - total flux cleaned = -0.00202877 Jy ! Component: 3900 - total flux cleaned = -0.0020387 Jy ! Component: 3950 - total flux cleaned = -0.00197916 Jy ! Component: 4000 - total flux cleaned = -0.00191011 Jy ! Component: 4050 - total flux cleaned = -0.00184156 Jy ! Total flux subtracted in 4096 components = -0.00178326 Jy ! Clean residual min=-0.000554 max=0.000644 Jy/beam ! Clean residual mean=0.000001 rms=0.000190 Jy/beam ! Combined flux in latest and established models = 0.112293 Jy keep ! Adding 290 model components to the UV plane model. ! The established model now contains 471 components and 0.112293 Jy ![Exited script file: muppet] wmap "J0810-1321_S_2017_10_09_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.166 x 14.78 at -18.33 degrees (North through East) ! Clean map min=-0.0023191 max=0.059064 Jy/beam ! Writing clean map to FITS file: J0810-1321_S_2017_10_09_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.0590641 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000189471 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.962366 0.962366 1.92473 3.84946 7.69893 15.3979 30.7957 61.5914 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0005 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.059 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.166 x 14.78 at -18.33 degrees (North through East) ! Clean map min=-0.0023191 max=0.059064 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J0810-1321_S_2017_10_09_pus_uvs.log closed on Sun May 12 13:08:00 2019