! Started logfile: J0809-1532_S_2017_10_21_pus_uvs.log on Sat May 11 20:53:48 2019 obs J0809-1532_S_2017_10_21_pus_uva.fits ! Reading UV FITS file: J0809-1532_S_2017_10_21_pus_uva.fits ! AN table 1: 98 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.765023 visibilities/baseline/integration-bin. ! Found source: J0809-1532 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 644 lines of history. ! ! Reading 10796 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J0809-1532_S_2017_10_21_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 105 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 203 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 203 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 597 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.889540Jy sigma=0.007507 ! Fit after self-cal, rms=0.878309Jy sigma=0.007416 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=4.455 mas, bmaj=26.64 mas, bpa=-16.97 degrees ! Estimated noise=1231.31 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0931211 Jy ! Component: 100 - total flux cleaned = 0.12434 Jy ! Total flux subtracted in 100 components = 0.12434 Jy ! Clean residual min=-0.011558 max=0.018941 Jy/beam ! Clean residual mean=-0.000136 rms=0.003856 Jy/beam ! Combined flux in latest and established models = 0.12434 Jy ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 15 components and 0.12434 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.105389Jy sigma=0.000835 ! Fit after self-cal, rms=0.105046Jy sigma=0.000832 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=5.069 mas, bmaj=30.75 mas, bpa=-16.99 degrees ! Estimated noise=1013.45 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0238436 Jy ! Component: 100 - total flux cleaned = 0.0362665 Jy ! Component: 150 - total flux cleaned = 0.0432834 Jy ! Component: 200 - total flux cleaned = 0.0470519 Jy ! Total flux subtracted in 200 components = 0.0470519 Jy ! Clean residual min=-0.006921 max=0.006399 Jy/beam ! Clean residual mean=-0.000116 rms=0.001885 Jy/beam ! Combined flux in latest and established models = 0.171391 Jy ! Performing phase self-cal ! Adding 45 model components to the UV plane model. ! The established model now contains 59 components and 0.171391 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.099371Jy sigma=0.000787 ! Fit after self-cal, rms=0.099187Jy sigma=0.000785 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 0.91 HN 1.02 KP 1.11 ! LA 0.99 MK 1.00* NL 0.90 OV 1.03 ! PT 0.97 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.96 HN 1.08 KP 1.07 ! LA 0.94 MK 1.00* NL 1.07 OV 1.05 ! PT 0.96 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.03 HN 1.04 KP 1.09 ! LA 0.76 MK 1.00* NL 1.10 OV 0.97 ! PT 0.93 ! ! ! Correcting IF 4. ! A total of 285 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.00* FD 0.00* HN 0.00* KP 0.00* ! LA 0.00* MK 0.00* NL 0.00* OV 0.00* ! PT 0.00* ! ! ! Fit before self-cal, rms=0.099187Jy sigma=0.000785 ! Fit after self-cal, rms=0.093473Jy sigma=0.000774 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=5.271 mas, bmaj=30.44 mas, bpa=-16.9 degrees ! Estimated noise=1030.92 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000529559 Jy ! Component: 100 - total flux cleaned = -0.000175854 Jy ! Component: 150 - total flux cleaned = -0.000446081 Jy ! Component: 200 - total flux cleaned = -0.000732054 Jy ! Total flux subtracted in 200 components = -0.000732054 Jy ! Clean residual min=-0.003991 max=0.003954 Jy/beam ! Clean residual mean=-0.000057 rms=0.001038 Jy/beam ! Combined flux in latest and established models = 0.170659 Jy ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 85 components and 0.170659 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.093377Jy sigma=0.000773 ! Fit after self-cal, rms=0.093290Jy sigma=0.000772 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.093290Jy sigma=0.000772 ! Fit after self-cal, rms=0.093433Jy sigma=0.000772 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=5.271 mas, bmaj=30.51 mas, bpa=-16.9 degrees ! Estimated noise=1032.42 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000300176 Jy ! Component: 100 - total flux cleaned = -0.000275794 Jy ! Component: 150 - total flux cleaned = -0.000537611 Jy ! Component: 200 - total flux cleaned = -0.000638662 Jy ! Total flux subtracted in 200 components = -0.000638662 Jy ! Clean residual min=-0.003874 max=0.003746 Jy/beam ! Clean residual mean=-0.000060 rms=0.000988 Jy/beam ! Combined flux in latest and established models = 0.170021 Jy selfcal ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 103 components and 0.170021 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.093390Jy sigma=0.000772 ! Fit after self-cal, rms=0.093383Jy sigma=0.000772 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -6.87967e-05 Jy ! Component: 100 - total flux cleaned = -0.000231909 Jy ! Component: 150 - total flux cleaned = -0.000288227 Jy ! Component: 200 - total flux cleaned = -0.000338702 Jy ! Total flux subtracted in 200 components = -0.000338702 Jy ! Clean residual min=-0.003677 max=0.003656 Jy/beam ! Clean residual mean=-0.000061 rms=0.000957 Jy/beam ! Combined flux in latest and established models = 0.169682 Jy ! Performing phase self-cal ! Adding 35 model components to the UV plane model. ! The established model now contains 125 components and 0.169682 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.093362Jy sigma=0.000772 ! Fit after self-cal, rms=0.093357Jy sigma=0.000772 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.093357Jy sigma=0.000772 ! Fit after self-cal, rms=0.093409Jy sigma=0.000772 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=5.267 mas, bmaj=30.56 mas, bpa=-16.91 degrees ! Estimated noise=1031.84 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 6.65543e-05 Jy ! Component: 100 - total flux cleaned = -0.000120464 Jy ! Component: 150 - total flux cleaned = -0.000231794 Jy ! Component: 200 - total flux cleaned = -0.000312217 Jy ! Total flux subtracted in 200 components = -0.000312217 Jy ! Clean residual min=-0.003536 max=0.003621 Jy/beam ! Clean residual mean=-0.000060 rms=0.000930 Jy/beam ! Combined flux in latest and established models = 0.16937 Jy selfcal ! Performing phase self-cal ! Adding 33 model components to the UV plane model. ! The established model now contains 142 components and 0.16937 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.093396Jy sigma=0.000771 ! Fit after self-cal, rms=0.093396Jy sigma=0.000771 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -3.21556e-05 Jy ! Component: 100 - total flux cleaned = -0.000108846 Jy ! Component: 150 - total flux cleaned = -0.000142226 Jy ! Component: 200 - total flux cleaned = -0.000157535 Jy ! Total flux subtracted in 200 components = -0.000157535 Jy ! Clean residual min=-0.003417 max=0.003605 Jy/beam ! Clean residual mean=-0.000060 rms=0.000917 Jy/beam ! Combined flux in latest and established models = 0.169212 Jy ! Performing phase self-cal ! Adding 31 model components to the UV plane model. ! The established model now contains 150 components and 0.169212 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.093389Jy sigma=0.000771 ! Fit after self-cal, rms=0.093387Jy sigma=0.000771 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.093387Jy sigma=0.000771 ! Fit after self-cal, rms=0.093331Jy sigma=0.000771 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.263 mas, bmaj=29.54 mas, bpa=-18.57 degrees ! Estimated noise=1124.34 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000375829 Jy ! Component: 100 - total flux cleaned = 0.000225327 Jy ! Component: 150 - total flux cleaned = 0.000166857 Jy ! Component: 200 - total flux cleaned = 0.000131694 Jy ! Total flux subtracted in 200 components = 0.000131694 Jy ! Clean residual min=-0.003469 max=0.004245 Jy/beam ! Clean residual mean=-0.000083 rms=0.001061 Jy/beam ! Combined flux in latest and established models = 0.169344 Jy selfcal ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 159 components and 0.169344 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.093327Jy sigma=0.000771 ! Fit after self-cal, rms=0.093325Jy sigma=0.000771 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -7.84243e-05 Jy ! Component: 100 - total flux cleaned = -0.000166157 Jy ! Component: 150 - total flux cleaned = -0.000198198 Jy ! Component: 200 - total flux cleaned = -0.000227848 Jy ! Total flux subtracted in 200 components = -0.000227848 Jy ! Clean residual min=-0.003466 max=0.004225 Jy/beam ! Clean residual mean=-0.000083 rms=0.001057 Jy/beam ! Combined flux in latest and established models = 0.169116 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 167 components and 0.169116 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.093324Jy sigma=0.000771 ! Fit after self-cal, rms=0.093321Jy sigma=0.000771 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=5.264 mas, bmaj=30.6 mas, bpa=-16.92 degrees ! Estimated noise=1030.32 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 5.264 x 30.6 at -16.92 degrees (North through East) ! Clean map min=-0.0032575 max=0.11453 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=4.598 mas, bmaj=26.67 mas, bpa=-16.7 degrees ! Estimated noise=1254.26 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0934576 Jy ! Component: 100 - total flux cleaned = 0.127924 Jy ! Component: 150 - total flux cleaned = 0.144894 Jy ! Component: 200 - total flux cleaned = 0.155118 Jy ! Total flux subtracted in 200 components = 0.155118 Jy ! Clean residual min=-0.004723 max=0.007090 Jy/beam ! Clean residual mean=-0.000075 rms=0.001586 Jy/beam ! Combined flux in latest and established models = 0.155118 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 38 model components to the UV plane model. ! The established model now contains 38 components and 0.155118 Jy ! Inverting map and beam ! Estimated beam: bmin=5.264 mas, bmaj=30.6 mas, bpa=-16.92 degrees ! Estimated noise=1030.32 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00821329 Jy ! Component: 100 - total flux cleaned = 0.0127484 Jy ! Component: 150 - total flux cleaned = 0.0150874 Jy ! Component: 200 - total flux cleaned = 0.0155206 Jy ! Total flux subtracted in 200 components = 0.0155206 Jy ! Clean residual min=-0.003904 max=0.003544 Jy/beam ! Clean residual mean=-0.000075 rms=0.001029 Jy/beam ! Combined flux in latest and established models = 0.170638 Jy ! Adding 35 model components to the UV plane model. ! The established model now contains 70 components and 0.170638 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.263 mas, bmaj=29.54 mas, bpa=-18.57 degrees ! Estimated noise=1124.34 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -7.62528e-05 Jy ! Component: 100 - total flux cleaned = -0.000287266 Jy ! Component: 150 - total flux cleaned = -0.000507571 Jy ! Component: 200 - total flux cleaned = -0.000773418 Jy ! Total flux subtracted in 200 components = -0.000773418 Jy ! Clean residual min=-0.003608 max=0.004029 Jy/beam ! Clean residual mean=-0.000092 rms=0.001110 Jy/beam ! Combined flux in latest and established models = 0.169865 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000229605 Jy ! Component: 100 - total flux cleaned = -0.000315781 Jy ! Component: 150 - total flux cleaned = -0.00036829 Jy ! Component: 200 - total flux cleaned = -0.000392359 Jy ! Total flux subtracted in 200 components = -0.000392359 Jy ! Clean residual min=-0.003546 max=0.004003 Jy/beam ! Clean residual mean=-0.000087 rms=0.001073 Jy/beam ! Combined flux in latest and established models = 0.169472 Jy ! Adding 35 model components to the UV plane model. ! The established model now contains 101 components and 0.169472 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=5.264 mas, bmaj=30.6 mas, bpa=-16.92 degrees ! Estimated noise=1030.32 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000189216 Jy ! Component: 100 - total flux cleaned = -0.000216486 Jy ! Component: 150 - total flux cleaned = -0.000267586 Jy ! Component: 200 - total flux cleaned = -0.000315289 Jy ! Total flux subtracted in 200 components = -0.000315289 Jy ! Clean residual min=-0.003719 max=0.003458 Jy/beam ! Clean residual mean=-0.000061 rms=0.000916 Jy/beam ! Combined flux in latest and established models = 0.169157 Jy selfcal ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 115 components and 0.169157 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.093335Jy sigma=0.000771 ! Fit after self-cal, rms=0.093331Jy sigma=0.000771 wmodel J0809-1532_S_2017_10_21_pus_map.mod ! Writing 115 model components to file: J0809-1532_S_2017_10_21_pus_map.mod wobs J0809-1532_S_2017_10_21_pus_uvs.fits ! Writing UV FITS file: J0809-1532_S_2017_10_21_pus_uvs.fits wwins J0809-1532_S_2017_10_21_pus_map.win ! wwins: Wrote 1 windows to J0809-1532_S_2017_10_21_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -8.32758e-05 Jy ! Component: 100 - total flux cleaned = 2.05871e-05 Jy ! Component: 150 - total flux cleaned = 0.000109606 Jy ! Component: 200 - total flux cleaned = 0.000190813 Jy ! Component: 250 - total flux cleaned = 0.000264166 Jy ! Component: 300 - total flux cleaned = 0.000297455 Jy ! Component: 350 - total flux cleaned = 0.000330883 Jy ! Component: 400 - total flux cleaned = 0.000302833 Jy ! Component: 450 - total flux cleaned = 0.000110184 Jy ! Component: 500 - total flux cleaned = 8.42673e-05 Jy ! Component: 550 - total flux cleaned = 3.47126e-05 Jy ! Component: 600 - total flux cleaned = 3.38272e-05 Jy ! Component: 650 - total flux cleaned = -1.25353e-05 Jy ! Component: 700 - total flux cleaned = -3.41879e-05 Jy ! Component: 750 - total flux cleaned = -3.40042e-05 Jy ! Component: 800 - total flux cleaned = -3.36909e-05 Jy ! Component: 850 - total flux cleaned = -7.29442e-05 Jy ! Component: 900 - total flux cleaned = -0.000168167 Jy ! Component: 950 - total flux cleaned = -0.000241496 Jy ! Component: 1000 - total flux cleaned = -0.000365432 Jy ! Component: 1050 - total flux cleaned = -0.000365026 Jy ! Component: 1100 - total flux cleaned = -0.000415055 Jy ! Component: 1150 - total flux cleaned = -0.000398735 Jy ! Component: 1200 - total flux cleaned = -0.000399083 Jy ! Component: 1250 - total flux cleaned = -0.000383508 Jy ! Component: 1300 - total flux cleaned = -0.000337903 Jy ! Component: 1350 - total flux cleaned = -0.000352807 Jy ! Component: 1400 - total flux cleaned = -0.000382074 Jy ! Component: 1450 - total flux cleaned = -0.000439396 Jy ! Component: 1500 - total flux cleaned = -0.000509909 Jy ! Component: 1550 - total flux cleaned = -0.000565458 Jy ! Component: 1600 - total flux cleaned = -0.000606682 Jy ! Component: 1650 - total flux cleaned = -0.000674561 Jy ! Component: 1700 - total flux cleaned = -0.000755049 Jy ! Component: 1750 - total flux cleaned = -0.000834558 Jy ! Component: 1800 - total flux cleaned = -0.000887059 Jy ! Component: 1850 - total flux cleaned = -0.000978197 Jy ! Component: 1900 - total flux cleaned = -0.00105547 Jy ! Component: 1950 - total flux cleaned = -0.00115764 Jy ! Component: 2000 - total flux cleaned = -0.00124629 Jy ! Component: 2050 - total flux cleaned = -0.0013846 Jy ! Component: 2100 - total flux cleaned = -0.00144715 Jy ! Component: 2150 - total flux cleaned = -0.00154645 Jy ! Component: 2200 - total flux cleaned = -0.00165728 Jy ! Component: 2250 - total flux cleaned = -0.00174284 Jy ! Component: 2300 - total flux cleaned = -0.00183995 Jy ! Component: 2350 - total flux cleaned = -0.00190035 Jy ! Component: 2400 - total flux cleaned = -0.0019603 Jy ! Component: 2450 - total flux cleaned = -0.00200818 Jy ! Component: 2500 - total flux cleaned = -0.00205591 Jy ! Component: 2550 - total flux cleaned = -0.00209163 Jy ! Component: 2600 - total flux cleaned = -0.00210356 Jy ! Component: 2650 - total flux cleaned = -0.00211551 Jy ! Component: 2700 - total flux cleaned = -0.00215108 Jy ! Component: 2750 - total flux cleaned = -0.00215105 Jy ! Component: 2800 - total flux cleaned = -0.00218672 Jy ! Component: 2850 - total flux cleaned = -0.00221043 Jy ! Component: 2900 - total flux cleaned = -0.00219854 Jy ! Component: 2950 - total flux cleaned = -0.00223406 Jy ! Component: 3000 - total flux cleaned = -0.00223403 Jy ! Component: 3050 - total flux cleaned = -0.00224583 Jy ! Component: 3100 - total flux cleaned = -0.00226956 Jy ! Component: 3150 - total flux cleaned = -0.0022457 Jy ! Component: 3200 - total flux cleaned = -0.00223382 Jy ! Component: 3250 - total flux cleaned = -0.0021859 Jy ! Component: 3300 - total flux cleaned = -0.00217392 Jy ! Component: 3350 - total flux cleaned = -0.00213777 Jy ! Component: 3400 - total flux cleaned = -0.00210144 Jy ! Component: 3450 - total flux cleaned = -0.00206495 Jy ! Component: 3500 - total flux cleaned = -0.00201607 Jy ! Component: 3550 - total flux cleaned = -0.00197935 Jy ! Component: 3600 - total flux cleaned = -0.00194238 Jy ! Component: 3650 - total flux cleaned = -0.00191778 Jy ! Component: 3700 - total flux cleaned = -0.00188052 Jy ! Component: 3750 - total flux cleaned = -0.00184323 Jy ! Component: 3800 - total flux cleaned = -0.00181825 Jy ! Component: 3850 - total flux cleaned = -0.00176785 Jy ! Component: 3900 - total flux cleaned = -0.00172987 Jy ! Component: 3950 - total flux cleaned = -0.00169165 Jy ! Component: 4000 - total flux cleaned = -0.00166595 Jy ! Component: 4050 - total flux cleaned = -0.00161455 Jy ! Total flux subtracted in 4096 components = -0.00160159 Jy ! Clean residual min=-0.000783 max=0.000789 Jy/beam ! Clean residual mean=-0.000013 rms=0.000247 Jy/beam ! Combined flux in latest and established models = 0.167555 Jy keep ! Adding 325 model components to the UV plane model. ! The established model now contains 440 components and 0.167555 Jy ![Exited script file: muppet] wmap "J0809-1532_S_2017_10_21_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 5.264 x 30.6 at -16.92 degrees (North through East) ! Clean map min=-0.001756 max=0.11398 Jy/beam ! Writing clean map to FITS file: J0809-1532_S_2017_10_21_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.113983 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000275234 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.724411 0.724411 1.44882 2.89764 5.79528 11.5906 23.1811 46.3623 92.7245 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0008 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.113 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 5.264 x 30.6 at -16.92 degrees (North through East) ! Clean map min=-0.001756 max=0.11398 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J0809-1532_S_2017_10_21_pus_uvs.log closed on Sat May 11 20:53:53 2019