! Started logfile: J0808+4950_S_2017_09_26_pus_uvs.log on Sat May 11 12:58:44 2019 obs J0808+4950_S_2017_09_26_pus_uva.fits ! Reading UV FITS file: J0808+4950_S_2017_09_26_pus_uva.fits ! AN table 1: 25 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.611111 visibilities/baseline/integration-bin. ! Found source: J0808+4950 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 674 lines of history. ! ! Reading 2200 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J0808+4950_S_2017_09_26_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 48 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 48 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 48 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 137 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.601367Jy sigma=0.005313 ! Fit after self-cal, rms=0.595271Jy sigma=0.005268 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.397 mas, bmaj=7.302 mas, bpa=-57.81 degrees ! Estimated noise=2451.42 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.312125 Jy ! Component: 100 - total flux cleaned = 0.383715 Jy ! Total flux subtracted in 100 components = 0.383715 Jy ! Clean residual min=-0.016982 max=0.026681 Jy/beam ! Clean residual mean=-0.000032 rms=0.004974 Jy/beam ! Combined flux in latest and established models = 0.383715 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 11 components and 0.383715 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.115857Jy sigma=0.000915 ! Fit after self-cal, rms=0.115852Jy sigma=0.000915 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=4.401 mas, bmaj=7.916 mas, bpa=-59.97 degrees ! Estimated noise=1928.84 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0349635 Jy ! Component: 100 - total flux cleaned = 0.0521687 Jy ! Component: 150 - total flux cleaned = 0.0610483 Jy ! Component: 200 - total flux cleaned = 0.0658497 Jy ! Total flux subtracted in 200 components = 0.0658497 Jy ! Clean residual min=-0.009978 max=0.009025 Jy/beam ! Clean residual mean=0.000045 rms=0.002442 Jy/beam ! Combined flux in latest and established models = 0.449564 Jy ! Performing phase self-cal ! Adding 35 model components to the UV plane model. ! The established model now contains 41 components and 0.449564 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.104847Jy sigma=0.000825 ! Fit after self-cal, rms=0.104788Jy sigma=0.000824 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 1.00* HN 0.99 KP 1.06 ! LA 1.02 MK 1.01 NL 0.92 OV 0.89 ! PT 0.99 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.07 FD 1.00* HN 1.04 KP 1.01 ! LA 0.98 MK 1.04 NL 1.03 OV 1.09 ! PT 0.99 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.91 FD 1.00* HN 1.02 KP 0.99 ! LA 1.00 MK 1.00 NL 1.01 OV 0.88 ! PT 0.98 ! ! ! Correcting IF 4. ! A total of 12 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.02 KP 1.00* ! LA 1.16 MK 1.00* NL 1.00* OV 1.25 ! PT 1.05 ! ! ! Fit before self-cal, rms=0.104788Jy sigma=0.000824 ! Fit after self-cal, rms=0.100439Jy sigma=0.000748 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=4.412 mas, bmaj=7.937 mas, bpa=-59.93 degrees ! Estimated noise=1933.19 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00237793 Jy ! Component: 100 - total flux cleaned = 0.00304389 Jy ! Component: 150 - total flux cleaned = 0.00328037 Jy ! Component: 200 - total flux cleaned = 0.00340966 Jy ! Total flux subtracted in 200 components = 0.00340966 Jy ! Clean residual min=-0.008504 max=0.007320 Jy/beam ! Clean residual mean=0.000005 rms=0.002067 Jy/beam ! Combined flux in latest and established models = 0.452974 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 50 components and 0.452974 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.100340Jy sigma=0.000747 ! Fit after self-cal, rms=0.100375Jy sigma=0.000747 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.100375Jy sigma=0.000747 ! Fit after self-cal, rms=0.098351Jy sigma=0.000649 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=4.419 mas, bmaj=7.934 mas, bpa=-60.03 degrees ! Estimated noise=1931.64 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000893042 Jy ! Component: 100 - total flux cleaned = 0.000997877 Jy ! Component: 150 - total flux cleaned = 0.00108731 Jy ! Component: 200 - total flux cleaned = 0.0011272 Jy ! Total flux subtracted in 200 components = 0.0011272 Jy ! Clean residual min=-0.004513 max=0.005553 Jy/beam ! Clean residual mean=-0.000000 rms=0.001188 Jy/beam ! Combined flux in latest and established models = 0.454101 Jy selfcal ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 59 components and 0.454101 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.098321Jy sigma=0.000649 ! Fit after self-cal, rms=0.098572Jy sigma=0.000649 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (3.5, -8). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00443313 Jy ! Component: 100 - total flux cleaned = 0.00465193 Jy ! Component: 150 - total flux cleaned = 0.00458591 Jy ! Component: 200 - total flux cleaned = 0.00458588 Jy ! Total flux subtracted in 200 components = 0.00458588 Jy ! Clean residual min=-0.003895 max=0.004224 Jy/beam ! Clean residual mean=0.000019 rms=0.001009 Jy/beam ! Combined flux in latest and established models = 0.458687 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 75 components and 0.458687 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.098331Jy sigma=0.000645 ! Fit after self-cal, rms=0.098288Jy sigma=0.000645 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.098288Jy sigma=0.000645 ! Fit after self-cal, rms=0.098915Jy sigma=0.000645 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=4.418 mas, bmaj=7.928 mas, bpa=-60.08 degrees ! Estimated noise=1929.99 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00210624 Jy ! Component: 100 - total flux cleaned = 0.00249633 Jy ! Component: 150 - total flux cleaned = 0.00249544 Jy ! Component: 200 - total flux cleaned = 0.00249589 Jy ! Total flux subtracted in 200 components = 0.00249589 Jy ! Clean residual min=-0.003654 max=0.004110 Jy/beam ! Clean residual mean=0.000023 rms=0.000937 Jy/beam ! Combined flux in latest and established models = 0.461183 Jy selfcal ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 84 components and 0.461183 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.098852Jy sigma=0.000644 ! Fit after self-cal, rms=0.098827Jy sigma=0.000644 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-108.5, -37). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00274898 Jy ! Component: 100 - total flux cleaned = 0.00267478 Jy ! Component: 150 - total flux cleaned = 0.00272598 Jy ! Component: 200 - total flux cleaned = 0.00301486 Jy ! Total flux subtracted in 200 components = 0.00301486 Jy ! Clean residual min=-0.003357 max=0.003395 Jy/beam ! Clean residual mean=0.000025 rms=0.000837 Jy/beam ! Combined flux in latest and established models = 0.464198 Jy ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 102 components and 0.464198 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.098639Jy sigma=0.000642 ! Fit after self-cal, rms=0.098618Jy sigma=0.000642 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.098618Jy sigma=0.000642 ! Fit after self-cal, rms=0.098413Jy sigma=0.000642 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.492 mas, bmaj=10.69 mas, bpa=82.34 degrees ! Estimated noise=2217.89 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000234107 Jy ! Component: 100 - total flux cleaned = 0.000317662 Jy ! Component: 150 - total flux cleaned = 0.000194521 Jy ! Component: 200 - total flux cleaned = 0.000139128 Jy ! Total flux subtracted in 200 components = 0.000139128 Jy ! Clean residual min=-0.003495 max=0.003248 Jy/beam ! Clean residual mean=0.000039 rms=0.000923 Jy/beam ! Combined flux in latest and established models = 0.464337 Jy selfcal ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 117 components and 0.464337 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.098379Jy sigma=0.000642 ! Fit after self-cal, rms=0.098360Jy sigma=0.000642 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000302738 Jy ! Component: 100 - total flux cleaned = -0.000380277 Jy ! Component: 150 - total flux cleaned = -0.000451274 Jy ! Component: 200 - total flux cleaned = -0.000494978 Jy ! Total flux subtracted in 200 components = -0.000494978 Jy ! Clean residual min=-0.003468 max=0.003184 Jy/beam ! Clean residual mean=0.000041 rms=0.000910 Jy/beam ! Combined flux in latest and established models = 0.463842 Jy ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 130 components and 0.463842 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.098343Jy sigma=0.000642 ! Fit after self-cal, rms=0.098343Jy sigma=0.000642 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=4.424 mas, bmaj=7.922 mas, bpa=-60.13 degrees ! Estimated noise=1927.45 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.424 x 7.922 at -60.13 degrees (North through East) ! Clean map min=-0.0032142 max=0.40791 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.437 mas, bmaj=7.314 mas, bpa=-57.85 degrees ! Estimated noise=2449.22 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.311484 Jy ! Component: 100 - total flux cleaned = 0.381617 Jy ! Component: 150 - total flux cleaned = 0.409732 Jy ! Component: 200 - total flux cleaned = 0.4257 Jy ! Total flux subtracted in 200 components = 0.4257 Jy ! Clean residual min=-0.007182 max=0.008179 Jy/beam ! Clean residual mean=-0.000036 rms=0.001860 Jy/beam ! Combined flux in latest and established models = 0.4257 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 27 model components to the UV plane model. ! The established model now contains 27 components and 0.4257 Jy ! Inverting map and beam ! Estimated beam: bmin=4.424 mas, bmaj=7.922 mas, bpa=-60.13 degrees ! Estimated noise=1927.45 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0131596 Jy ! Component: 100 - total flux cleaned = 0.0207953 Jy ! Component: 150 - total flux cleaned = 0.025699 Jy ! Component: 200 - total flux cleaned = 0.0287865 Jy ! Total flux subtracted in 200 components = 0.0287865 Jy ! Clean residual min=-0.004073 max=0.003501 Jy/beam ! Clean residual mean=-0.000007 rms=0.001034 Jy/beam ! Combined flux in latest and established models = 0.454486 Jy ! Adding 54 model components to the UV plane model. ! The established model now contains 71 components and 0.454486 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.492 mas, bmaj=10.69 mas, bpa=82.34 degrees ! Estimated noise=2217.89 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00387812 Jy ! Component: 100 - total flux cleaned = 0.00588616 Jy ! Component: 150 - total flux cleaned = 0.00703713 Jy ! Component: 200 - total flux cleaned = 0.0077862 Jy ! Total flux subtracted in 200 components = 0.0077862 Jy ! Clean residual min=-0.003654 max=0.003111 Jy/beam ! Clean residual mean=0.000030 rms=0.000971 Jy/beam ! Combined flux in latest and established models = 0.462272 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000458484 Jy ! Component: 100 - total flux cleaned = 0.000706531 Jy ! Component: 150 - total flux cleaned = 0.000881868 Jy ! Component: 200 - total flux cleaned = 0.00107771 Jy ! Total flux subtracted in 200 components = 0.00107771 Jy ! Clean residual min=-0.003541 max=0.003225 Jy/beam ! Clean residual mean=0.000039 rms=0.000934 Jy/beam ! Combined flux in latest and established models = 0.46335 Jy ! Adding 71 model components to the UV plane model. ! The established model now contains 134 components and 0.46335 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=4.424 mas, bmaj=7.922 mas, bpa=-60.13 degrees ! Estimated noise=1927.45 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00066406 Jy ! Component: 100 - total flux cleaned = -0.00072964 Jy ! Component: 150 - total flux cleaned = -0.000502545 Jy ! Component: 200 - total flux cleaned = -0.000294876 Jy ! Total flux subtracted in 200 components = -0.000294876 Jy ! Clean residual min=-0.003282 max=0.003225 Jy/beam ! Clean residual mean=0.000022 rms=0.000820 Jy/beam ! Combined flux in latest and established models = 0.463055 Jy selfcal ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 150 components and 0.463055 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.098401Jy sigma=0.000642 ! Fit after self-cal, rms=0.098407Jy sigma=0.000642 wmodel J0808+4950_S_2017_09_26_pus_map.mod ! Writing 150 model components to file: J0808+4950_S_2017_09_26_pus_map.mod wobs J0808+4950_S_2017_09_26_pus_uvs.fits ! Writing UV FITS file: J0808+4950_S_2017_09_26_pus_uvs.fits wwins J0808+4950_S_2017_09_26_pus_map.win ! wwins: Wrote 3 windows to J0808+4950_S_2017_09_26_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000433779 Jy ! Component: 100 - total flux cleaned = -0.000431743 Jy ! Component: 150 - total flux cleaned = -0.000380123 Jy ! Component: 200 - total flux cleaned = -0.000573447 Jy ! Component: 250 - total flux cleaned = -0.00075704 Jy ! Component: 300 - total flux cleaned = -0.000933333 Jy ! Component: 350 - total flux cleaned = -0.0011435 Jy ! Component: 400 - total flux cleaned = -0.00122439 Jy ! Component: 450 - total flux cleaned = -0.00118414 Jy ! Component: 500 - total flux cleaned = -0.00107163 Jy ! Component: 550 - total flux cleaned = -0.000852723 Jy ! Component: 600 - total flux cleaned = -0.000674884 Jy ! Component: 650 - total flux cleaned = -0.000467123 Jy ! Component: 700 - total flux cleaned = -0.000197758 Jy ! Component: 750 - total flux cleaned = 3.23617e-05 Jy ! Component: 800 - total flux cleaned = 0.000225062 Jy ! Component: 850 - total flux cleaned = 0.000445122 Jy ! Component: 900 - total flux cleaned = 0.000690581 Jy ! Component: 950 - total flux cleaned = 0.000871252 Jy ! Component: 1000 - total flux cleaned = 0.00107721 Jy ! Component: 1050 - total flux cleaned = 0.00125006 Jy ! Component: 1100 - total flux cleaned = 0.00144791 Jy ! Component: 1150 - total flux cleaned = 0.00164136 Jy ! Component: 1200 - total flux cleaned = 0.00174975 Jy ! Component: 1250 - total flux cleaned = 0.00196272 Jy ! Component: 1300 - total flux cleaned = 0.00206687 Jy ! Component: 1350 - total flux cleaned = 0.00222083 Jy ! Component: 1400 - total flux cleaned = 0.00237242 Jy ! Component: 1450 - total flux cleaned = 0.00252187 Jy ! Component: 1500 - total flux cleaned = 0.00264411 Jy ! Component: 1550 - total flux cleaned = 0.00288445 Jy ! Component: 1600 - total flux cleaned = 0.0030739 Jy ! Component: 1650 - total flux cleaned = 0.0032369 Jy ! Component: 1700 - total flux cleaned = 0.00339793 Jy ! Component: 1750 - total flux cleaned = 0.00362434 Jy ! Component: 1800 - total flux cleaned = 0.00378058 Jy ! Component: 1850 - total flux cleaned = 0.00391266 Jy ! Component: 1900 - total flux cleaned = 0.00410763 Jy ! Component: 1950 - total flux cleaned = 0.00419288 Jy ! Component: 2000 - total flux cleaned = 0.00431963 Jy ! Component: 2050 - total flux cleaned = 0.00444432 Jy ! Component: 2100 - total flux cleaned = 0.00452634 Jy ! Component: 2150 - total flux cleaned = 0.00454635 Jy ! Component: 2200 - total flux cleaned = 0.00458657 Jy ! Component: 2250 - total flux cleaned = 0.00472514 Jy ! Component: 2300 - total flux cleaned = 0.00484242 Jy ! Component: 2350 - total flux cleaned = 0.00493917 Jy ! Component: 2400 - total flux cleaned = 0.00503484 Jy ! Component: 2450 - total flux cleaned = 0.00507279 Jy ! Component: 2500 - total flux cleaned = 0.00516668 Jy ! Component: 2550 - total flux cleaned = 0.00524072 Jy ! Component: 2600 - total flux cleaned = 0.00527729 Jy ! Component: 2650 - total flux cleaned = 0.00536829 Jy ! Component: 2700 - total flux cleaned = 0.00542244 Jy ! Component: 2750 - total flux cleaned = 0.00547585 Jy ! Component: 2800 - total flux cleaned = 0.00547605 Jy ! Component: 2850 - total flux cleaned = 0.00551126 Jy ! Component: 2900 - total flux cleaned = 0.00559822 Jy ! Component: 2950 - total flux cleaned = 0.00564991 Jy ! Component: 3000 - total flux cleaned = 0.00570106 Jy ! Component: 3050 - total flux cleaned = 0.00571804 Jy ! Component: 3100 - total flux cleaned = 0.00580184 Jy ! Component: 3150 - total flux cleaned = 0.0058849 Jy ! Component: 3200 - total flux cleaned = 0.00591776 Jy ! Component: 3250 - total flux cleaned = 0.00595051 Jy ! Component: 3300 - total flux cleaned = 0.00598298 Jy ! Component: 3350 - total flux cleaned = 0.00604736 Jy ! Component: 3400 - total flux cleaned = 0.00609537 Jy ! Component: 3450 - total flux cleaned = 0.00614292 Jy ! Component: 3500 - total flux cleaned = 0.00617446 Jy ! Component: 3550 - total flux cleaned = 0.00622147 Jy ! Component: 3600 - total flux cleaned = 0.00623701 Jy ! Component: 3650 - total flux cleaned = 0.00625234 Jy ! Component: 3700 - total flux cleaned = 0.00629827 Jy ! Component: 3750 - total flux cleaned = 0.00628307 Jy ! Component: 3800 - total flux cleaned = 0.00631338 Jy ! Component: 3850 - total flux cleaned = 0.00635851 Jy ! Component: 3900 - total flux cleaned = 0.0063734 Jy ! Component: 3950 - total flux cleaned = 0.0063585 Jy ! Component: 4000 - total flux cleaned = 0.0063141 Jy ! Component: 4050 - total flux cleaned = 0.00626998 Jy ! Total flux subtracted in 4096 components = 0.00622617 Jy ! Clean residual min=-0.001004 max=0.000835 Jy/beam ! Clean residual mean=0.000005 rms=0.000254 Jy/beam ! Combined flux in latest and established models = 0.469281 Jy keep ! Adding 257 model components to the UV plane model. ! The established model now contains 407 components and 0.469281 Jy ![Exited script file: muppet] wmap "J0808+4950_S_2017_09_26_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.424 x 7.922 at -60.13 degrees (North through East) ! Clean map min=-0.0025229 max=0.40954 Jy/beam ! Writing clean map to FITS file: J0808+4950_S_2017_09_26_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.409539 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000243939 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.178693 0.178693 0.357386 0.714772 1.42954 2.85909 5.71818 11.4364 22.8727 45.7454 91.4908 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0007 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.409 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.424 x 7.922 at -60.13 degrees (North through East) ! Clean map min=-0.0025229 max=0.40954 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J0808+4950_S_2017_09_26_pus_uvs.log closed on Sat May 11 12:58:49 2019