! Started logfile: J0808+2646_S_2017_07_09_pus_uvs.log on Wed May 8 14:44:47 2019 obs J0808+2646_S_2017_07_09_pus_uva.fits ! Reading UV FITS file: J0808+2646_S_2017_07_09_pus_uva.fits ! AN table 1: 114 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.948148 visibilities/baseline/integration-bin. ! Found source: J0808+2646 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 594 lines of history. ! ! Reading 19456 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J0808+2646_S_2017_07_09_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 42 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 92 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 77 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 599 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.774496Jy sigma=0.007217 ! Fit after self-cal, rms=0.724854Jy sigma=0.006784 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.058 mas, bmaj=5.853 mas, bpa=3.931 degrees ! Estimated noise=911.662 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.200567 Jy ! Component: 100 - total flux cleaned = 0.261417 Jy ! Total flux subtracted in 100 components = 0.261417 Jy ! Clean residual min=-0.009969 max=0.028798 Jy/beam ! Clean residual mean=-0.000023 rms=0.003017 Jy/beam ! Combined flux in latest and established models = 0.261417 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 10 components and 0.261417 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.105898Jy sigma=0.000955 ! Fit after self-cal, rms=0.105841Jy sigma=0.000954 ! Inverting map ! Added new window around map position (-3.5, 0.5). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0336966 Jy ! Component: 100 - total flux cleaned = 0.0547563 Jy ! Total flux subtracted in 100 components = 0.0547563 Jy ! Clean residual min=-0.006005 max=0.013790 Jy/beam ! Clean residual mean=-0.000009 rms=0.001759 Jy/beam ! Combined flux in latest and established models = 0.316174 Jy ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 27 components and 0.316174 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.089584Jy sigma=0.000792 ! Fit after self-cal, rms=0.089465Jy sigma=0.000790 ! Inverting map ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0142446 Jy ! Component: 100 - total flux cleaned = 0.0235969 Jy ! Total flux subtracted in 100 components = 0.0235969 Jy ! Clean residual min=-0.005091 max=0.011531 Jy/beam ! Clean residual mean=-0.000003 rms=0.001407 Jy/beam ! Combined flux in latest and established models = 0.33977 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 31 components and 0.33977 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.085954Jy sigma=0.000756 ! Fit after self-cal, rms=0.085924Jy sigma=0.000756 ! Inverting map ! Added new window around map position (7, 3). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0107777 Jy ! Component: 100 - total flux cleaned = 0.017212 Jy ! Total flux subtracted in 100 components = 0.017212 Jy ! Clean residual min=-0.004776 max=0.004428 Jy/beam ! Clean residual mean=-0.000000 rms=0.001177 Jy/beam ! Combined flux in latest and established models = 0.356982 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 39 components and 0.356982 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.084220Jy sigma=0.000739 ! Fit after self-cal, rms=0.084155Jy sigma=0.000739 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.731 mas, bmaj=7.249 mas, bpa=9.193 degrees ! Estimated noise=628.123 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0070795 Jy ! Component: 100 - total flux cleaned = 0.0112075 Jy ! Component: 150 - total flux cleaned = 0.0139534 Jy ! Component: 200 - total flux cleaned = 0.0158529 Jy ! Total flux subtracted in 200 components = 0.0158529 Jy ! Clean residual min=-0.003968 max=0.003801 Jy/beam ! Clean residual mean=0.000005 rms=0.000932 Jy/beam ! Combined flux in latest and established models = 0.372835 Jy ! Performing phase self-cal ! Adding 32 model components to the UV plane model. ! The established model now contains 66 components and 0.372835 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.083426Jy sigma=0.000733 ! Fit after self-cal, rms=0.083409Jy sigma=0.000733 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.92 FD 0.99 HN 0.96 KP 1.01 ! LA 1.01 MK 1.05 NL 0.92 OV 1.00 ! PT 1.01 SC 0.94 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.15 FD 1.03 HN 1.00 KP 0.98 ! LA 0.97 MK 1.04 NL 1.05 OV 1.04 ! PT 0.98 SC 1.04 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.97 FD 1.05 HN 0.99 KP 0.98 ! LA 1.00 MK 1.08 NL 1.01 OV 0.97 ! PT 0.97 SC 1.03 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.03 HN 0.99 KP 1.00* ! LA 1.02 MK 1.03 NL 1.00* OV 1.00* ! PT 1.01 SC 1.00* ! ! ! Fit before self-cal, rms=0.083409Jy sigma=0.000733 ! Fit after self-cal, rms=0.082026Jy sigma=0.000716 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.757 mas, bmaj=7.269 mas, bpa=9.336 degrees ! Estimated noise=630.531 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00123873 Jy ! Component: 100 - total flux cleaned = 0.00143464 Jy ! Component: 150 - total flux cleaned = 0.00155848 Jy ! Component: 200 - total flux cleaned = 0.00159313 Jy ! Total flux subtracted in 200 components = 0.00159313 Jy ! Clean residual min=-0.003767 max=0.003359 Jy/beam ! Clean residual mean=0.000003 rms=0.000851 Jy/beam ! Combined flux in latest and established models = 0.374428 Jy ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 88 components and 0.374428 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.081960Jy sigma=0.000715 ! Fit after self-cal, rms=0.081960Jy sigma=0.000715 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.081960Jy sigma=0.000715 ! Fit after self-cal, rms=0.077753Jy sigma=0.000682 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.759 mas, bmaj=7.29 mas, bpa=9.576 degrees ! Estimated noise=631.117 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000968603 Jy ! Component: 100 - total flux cleaned = 0.00116771 Jy ! Component: 150 - total flux cleaned = 0.00132902 Jy ! Component: 200 - total flux cleaned = 0.00140037 Jy ! Total flux subtracted in 200 components = 0.00140037 Jy ! Clean residual min=-0.001926 max=0.002933 Jy/beam ! Clean residual mean=0.000003 rms=0.000524 Jy/beam ! Combined flux in latest and established models = 0.375829 Jy selfcal ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 96 components and 0.375829 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.077728Jy sigma=0.000682 ! Fit after self-cal, rms=0.077740Jy sigma=0.000681 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-12, -7). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00224895 Jy ! Component: 100 - total flux cleaned = 0.00244277 Jy ! Component: 150 - total flux cleaned = 0.00252384 Jy ! Component: 200 - total flux cleaned = 0.00255869 Jy ! Total flux subtracted in 200 components = 0.00255869 Jy ! Clean residual min=-0.001727 max=0.001919 Jy/beam ! Clean residual mean=0.000003 rms=0.000472 Jy/beam ! Combined flux in latest and established models = 0.378388 Jy ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 116 components and 0.378388 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.077635Jy sigma=0.000681 ! Fit after self-cal, rms=0.077627Jy sigma=0.000680 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.077627Jy sigma=0.000680 ! Fit after self-cal, rms=0.077546Jy sigma=0.000679 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.755 mas, bmaj=7.287 mas, bpa=9.569 degrees ! Estimated noise=630.847 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0014444 Jy ! Component: 100 - total flux cleaned = 0.00202507 Jy ! Component: 150 - total flux cleaned = 0.00225737 Jy ! Component: 200 - total flux cleaned = 0.00240862 Jy ! Total flux subtracted in 200 components = 0.00240862 Jy ! Clean residual min=-0.001506 max=0.001632 Jy/beam ! Clean residual mean=0.000003 rms=0.000400 Jy/beam ! Combined flux in latest and established models = 0.380796 Jy selfcal ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 134 components and 0.380796 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.077513Jy sigma=0.000679 ! Fit after self-cal, rms=0.077511Jy sigma=0.000679 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000371009 Jy ! Component: 100 - total flux cleaned = 0.000439717 Jy ! Component: 150 - total flux cleaned = 0.000481376 Jy ! Component: 200 - total flux cleaned = 0.000461237 Jy ! Total flux subtracted in 200 components = 0.000461237 Jy ! Clean residual min=-0.001529 max=0.001638 Jy/beam ! Clean residual mean=0.000003 rms=0.000393 Jy/beam ! Combined flux in latest and established models = 0.381257 Jy ! Performing phase self-cal ! Adding 29 model components to the UV plane model. ! The established model now contains 146 components and 0.381257 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.077499Jy sigma=0.000679 ! Fit after self-cal, rms=0.077500Jy sigma=0.000679 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.077500Jy sigma=0.000679 ! Fit after self-cal, rms=0.077447Jy sigma=0.000679 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.324 mas, bmaj=10.4 mas, bpa=-0.7476 degrees ! Estimated noise=759.232 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0010754 Jy ! Component: 100 - total flux cleaned = 0.00159426 Jy ! Component: 150 - total flux cleaned = 0.0017793 Jy ! Component: 200 - total flux cleaned = 0.00192007 Jy ! Total flux subtracted in 200 components = 0.00192007 Jy ! Clean residual min=-0.001426 max=0.001807 Jy/beam ! Clean residual mean=0.000006 rms=0.000441 Jy/beam ! Combined flux in latest and established models = 0.383177 Jy selfcal ! Performing phase self-cal ! Adding 35 model components to the UV plane model. ! The established model now contains 178 components and 0.383177 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.077443Jy sigma=0.000679 ! Fit after self-cal, rms=0.077442Jy sigma=0.000679 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000101627 Jy ! Component: 100 - total flux cleaned = 0.000228112 Jy ! Component: 150 - total flux cleaned = 0.000345497 Jy ! Component: 200 - total flux cleaned = 0.000446342 Jy ! Total flux subtracted in 200 components = 0.000446342 Jy ! Clean residual min=-0.001405 max=0.001821 Jy/beam ! Clean residual mean=0.000006 rms=0.000436 Jy/beam ! Combined flux in latest and established models = 0.383624 Jy ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 189 components and 0.383624 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.077441Jy sigma=0.000679 ! Fit after self-cal, rms=0.077441Jy sigma=0.000679 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.753 mas, bmaj=7.283 mas, bpa=9.582 degrees ! Estimated noise=630.925 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.753 x 7.283 at 9.582 degrees (North through East) ! Clean map min=-0.0014841 max=0.27603 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.077 mas, bmaj=5.88 mas, bpa=4.579 degrees ! Estimated noise=921.656 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.202561 Jy ! Component: 100 - total flux cleaned = 0.263116 Jy ! Component: 150 - total flux cleaned = 0.296413 Jy ! Component: 200 - total flux cleaned = 0.317819 Jy ! Total flux subtracted in 200 components = 0.317819 Jy ! Clean residual min=-0.005306 max=0.011880 Jy/beam ! Clean residual mean=-0.000011 rms=0.001542 Jy/beam ! Combined flux in latest and established models = 0.317819 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 29 model components to the UV plane model. ! The established model now contains 29 components and 0.317819 Jy ! Inverting map and beam ! Estimated beam: bmin=3.753 mas, bmaj=7.283 mas, bpa=9.582 degrees ! Estimated noise=630.925 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.021128 Jy ! Component: 100 - total flux cleaned = 0.0341197 Jy ! Component: 150 - total flux cleaned = 0.0426437 Jy ! Component: 200 - total flux cleaned = 0.0486683 Jy ! Total flux subtracted in 200 components = 0.0486683 Jy ! Clean residual min=-0.002274 max=0.003478 Jy/beam ! Clean residual mean=-0.000003 rms=0.000658 Jy/beam ! Combined flux in latest and established models = 0.366487 Jy ! Adding 46 model components to the UV plane model. ! The established model now contains 64 components and 0.366487 Jy ! Inverting map ! Added new window around map position (3, 0.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00443447 Jy ! Component: 100 - total flux cleaned = 0.00777892 Jy ! Component: 150 - total flux cleaned = 0.0103399 Jy ! Component: 200 - total flux cleaned = 0.0116722 Jy ! Total flux subtracted in 200 components = 0.0116722 Jy ! Clean residual min=-0.001758 max=0.001799 Jy/beam ! Clean residual mean=0.000001 rms=0.000445 Jy/beam ! Combined flux in latest and established models = 0.378159 Jy ! Adding 46 model components to the UV plane model. ! The established model now contains 101 components and 0.378159 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.324 mas, bmaj=10.4 mas, bpa=-0.7476 degrees ! Estimated noise=759.232 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00227829 Jy ! Component: 100 - total flux cleaned = 0.00355146 Jy ! Component: 150 - total flux cleaned = 0.00399092 Jy ! Component: 200 - total flux cleaned = 0.00418983 Jy ! Total flux subtracted in 200 components = 0.00418983 Jy ! Clean residual min=-0.001480 max=0.001759 Jy/beam ! Clean residual mean=0.000005 rms=0.000449 Jy/beam ! Combined flux in latest and established models = 0.382349 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000168971 Jy ! Component: 100 - total flux cleaned = 0.000340644 Jy ! Component: 150 - total flux cleaned = 0.000469425 Jy ! Component: 200 - total flux cleaned = 0.000583679 Jy ! Total flux subtracted in 200 components = 0.000583679 Jy ! Clean residual min=-0.001485 max=0.001762 Jy/beam ! Clean residual mean=0.000005 rms=0.000439 Jy/beam ! Combined flux in latest and established models = 0.382933 Jy ! Adding 78 model components to the UV plane model. ! The established model now contains 172 components and 0.382933 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.753 mas, bmaj=7.283 mas, bpa=9.582 degrees ! Estimated noise=630.925 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000156769 Jy ! Component: 100 - total flux cleaned = -0.000236332 Jy ! Component: 150 - total flux cleaned = -0.00023638 Jy ! Component: 200 - total flux cleaned = -0.000236281 Jy ! Total flux subtracted in 200 components = -0.000236281 Jy ! Clean residual min=-0.001574 max=0.001588 Jy/beam ! Clean residual mean=0.000003 rms=0.000388 Jy/beam ! Combined flux in latest and established models = 0.382696 Jy selfcal ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 191 components and 0.382696 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.077498Jy sigma=0.000679 ! Fit after self-cal, rms=0.077485Jy sigma=0.000679 wmodel J0808+2646_S_2017_07_09_pus_map.mod ! Writing 191 model components to file: J0808+2646_S_2017_07_09_pus_map.mod wobs J0808+2646_S_2017_07_09_pus_uvs.fits ! Writing UV FITS file: J0808+2646_S_2017_07_09_pus_uvs.fits wwins J0808+2646_S_2017_07_09_pus_map.win ! wwins: Wrote 5 windows to J0808+2646_S_2017_07_09_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.000264332 Jy ! Component: 100 - total flux cleaned = 0.000455867 Jy ! Component: 150 - total flux cleaned = 0.000560294 Jy ! Component: 200 - total flux cleaned = 0.000660514 Jy ! Component: 250 - total flux cleaned = 0.000660658 Jy ! Component: 300 - total flux cleaned = 0.000660454 Jy ! Component: 350 - total flux cleaned = 0.000637522 Jy ! Component: 400 - total flux cleaned = 0.000593252 Jy ! Component: 450 - total flux cleaned = 0.000549877 Jy ! Component: 500 - total flux cleaned = 0.000486276 Jy ! Component: 550 - total flux cleaned = 0.000465285 Jy ! Component: 600 - total flux cleaned = 0.000485465 Jy ! Component: 650 - total flux cleaned = 0.000444784 Jy ! Component: 700 - total flux cleaned = 0.00046464 Jy ! Component: 750 - total flux cleaned = 0.000444742 Jy ! Component: 800 - total flux cleaned = 0.000386467 Jy ! Component: 850 - total flux cleaned = 0.000329317 Jy ! Component: 900 - total flux cleaned = 0.000348027 Jy ! Component: 950 - total flux cleaned = 0.000329542 Jy ! Component: 1000 - total flux cleaned = 0.000366365 Jy ! Component: 1050 - total flux cleaned = 0.000420874 Jy ! Component: 1100 - total flux cleaned = 0.000456669 Jy ! Component: 1150 - total flux cleaned = 0.00050928 Jy ! Component: 1200 - total flux cleaned = 0.00052649 Jy ! Component: 1250 - total flux cleaned = 0.000560787 Jy ! Component: 1300 - total flux cleaned = 0.000612149 Jy ! Component: 1350 - total flux cleaned = 0.000662891 Jy ! Component: 1400 - total flux cleaned = 0.000729545 Jy ! Component: 1450 - total flux cleaned = 0.000795558 Jy ! Component: 1500 - total flux cleaned = 0.000860616 Jy ! Component: 1550 - total flux cleaned = 0.00087678 Jy ! Component: 1600 - total flux cleaned = 0.000892847 Jy ! Component: 1650 - total flux cleaned = 0.000908587 Jy ! Component: 1700 - total flux cleaned = 0.000924287 Jy ! Component: 1750 - total flux cleaned = 0.000986518 Jy ! Component: 1800 - total flux cleaned = 0.0010481 Jy ! Component: 1850 - total flux cleaned = 0.00109392 Jy ! Component: 1900 - total flux cleaned = 0.0011241 Jy ! Component: 1950 - total flux cleaned = 0.00118419 Jy ! Component: 2000 - total flux cleaned = 0.00122875 Jy ! Component: 2050 - total flux cleaned = 0.00122895 Jy ! Component: 2100 - total flux cleaned = 0.0012874 Jy ! Component: 2150 - total flux cleaned = 0.00131638 Jy ! Component: 2200 - total flux cleaned = 0.00141671 Jy ! Component: 2250 - total flux cleaned = 0.0013311 Jy ! Component: 2300 - total flux cleaned = 0.00137346 Jy ! Component: 2350 - total flux cleaned = 0.00135945 Jy ! Component: 2400 - total flux cleaned = 0.00140113 Jy ! Component: 2450 - total flux cleaned = 0.00141491 Jy ! Component: 2500 - total flux cleaned = 0.0013738 Jy ! Component: 2550 - total flux cleaned = 0.00134667 Jy ! Component: 2600 - total flux cleaned = 0.00140059 Jy ! Component: 2650 - total flux cleaned = 0.00138721 Jy ! Component: 2700 - total flux cleaned = 0.00137404 Jy ! Component: 2750 - total flux cleaned = 0.00142688 Jy ! Component: 2800 - total flux cleaned = 0.00142668 Jy ! Component: 2850 - total flux cleaned = 0.00143971 Jy ! Component: 2900 - total flux cleaned = 0.00142699 Jy ! Component: 2950 - total flux cleaned = 0.00147831 Jy ! Component: 3000 - total flux cleaned = 0.00152911 Jy ! Component: 3050 - total flux cleaned = 0.0014531 Jy ! Component: 3100 - total flux cleaned = 0.00151608 Jy ! Component: 3150 - total flux cleaned = 0.00147861 Jy ! Component: 3200 - total flux cleaned = 0.00150335 Jy ! Component: 3250 - total flux cleaned = 0.00154044 Jy ! Component: 3300 - total flux cleaned = 0.00155272 Jy ! Component: 3350 - total flux cleaned = 0.0014796 Jy ! Component: 3400 - total flux cleaned = 0.00153998 Jy ! Component: 3450 - total flux cleaned = 0.00152801 Jy ! Component: 3500 - total flux cleaned = 0.00153994 Jy ! Component: 3550 - total flux cleaned = 0.00155189 Jy ! Component: 3600 - total flux cleaned = 0.00161097 Jy ! Component: 3650 - total flux cleaned = 0.00156412 Jy ! Component: 3700 - total flux cleaned = 0.00162248 Jy ! Component: 3750 - total flux cleaned = 0.00162246 Jy ! Component: 3800 - total flux cleaned = 0.00169163 Jy ! Component: 3850 - total flux cleaned = 0.00165722 Jy ! Component: 3900 - total flux cleaned = 0.00172559 Jy ! Component: 3950 - total flux cleaned = 0.00170308 Jy ! Component: 4000 - total flux cleaned = 0.00172559 Jy ! Component: 4050 - total flux cleaned = 0.00174808 Jy ! Total flux subtracted in 4096 components = 0.00174814 Jy ! Clean residual min=-0.000639 max=0.000691 Jy/beam ! Clean residual mean=0.000002 rms=0.000206 Jy/beam ! Combined flux in latest and established models = 0.384445 Jy keep ! Adding 317 model components to the UV plane model. ! The established model now contains 508 components and 0.384445 Jy ![Exited script file: muppet] wmap "J0808+2646_S_2017_07_09_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.753 x 7.283 at 9.582 degrees (North through East) ! Clean map min=-0.0011213 max=0.27661 Jy/beam ! Writing clean map to FITS file: J0808+2646_S_2017_07_09_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.276607 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000202376 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.219491 0.219491 0.438982 0.877965 1.75593 3.51186 7.02372 14.0474 28.0949 56.1898 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0006 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.276 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.753 x 7.283 at 9.582 degrees (North through East) ! Clean map min=-0.0011213 max=0.27661 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J0808+2646_S_2017_07_09_pus_uvs.log closed on Wed May 8 14:44:52 2019