! Started logfile: J0807-1531_S_2017_08_12_pus_uvs.log on Fri May 10 14:55:38 2019 obs J0807-1531_S_2017_08_12_pus_uva.fits ! Reading UV FITS file: J0807-1531_S_2017_08_12_pus_uva.fits ! AN table 1: 76 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.765497 visibilities/baseline/integration-bin. ! Found source: J0807-1531 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 594 lines of history. ! ! Reading 10472 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J0807-1531_S_2017_08_12_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 118 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 130 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 105 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 489 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.927514Jy sigma=0.007132 ! Fit after self-cal, rms=0.911351Jy sigma=0.007023 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.466 mas, bmaj=6.891 mas, bpa=-8.518 degrees ! Estimated noise=1740.62 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0693339 Jy ! Component: 100 - total flux cleaned = 0.085596 Jy ! Total flux subtracted in 100 components = 0.085596 Jy ! Clean residual min=-0.006533 max=0.008538 Jy/beam ! Clean residual mean=-0.000006 rms=0.001715 Jy/beam ! Combined flux in latest and established models = 0.0855961 Jy ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 8 components and 0.0855961 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.093665Jy sigma=0.000678 ! Fit after self-cal, rms=0.093623Jy sigma=0.000678 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.106 mas, bmaj=8.009 mas, bpa=-5.244 degrees ! Estimated noise=1064.84 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00832914 Jy ! Component: 100 - total flux cleaned = 0.0118046 Jy ! Component: 150 - total flux cleaned = 0.012514 Jy ! Component: 200 - total flux cleaned = 0.0126293 Jy ! Total flux subtracted in 200 components = 0.0126293 Jy ! Clean residual min=-0.003771 max=0.004371 Jy/beam ! Clean residual mean=0.000002 rms=0.001049 Jy/beam ! Combined flux in latest and established models = 0.0982254 Jy ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 24 components and 0.0982253 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.092926Jy sigma=0.000673 ! Fit after self-cal, rms=0.092933Jy sigma=0.000673 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.95 HN 1.08 KP 1.05 ! LA 0.99 MK 0.95 NL 0.88 OV 1.04 ! PT 0.96 SC 0.98 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00 HN 1.05 KP 0.98 ! LA 0.99 MK 0.97 NL 1.22 OV 1.00 ! PT 0.96 SC 0.97 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00 HN 0.99 KP 0.88 ! LA 0.96 MK 1.27 NL 1.14 OV 0.97 ! PT 1.00 SC 0.99 ! ! ! Correcting IF 4. ! A total of 39 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.14 HN 0.85 KP 1.00* ! LA 1.00* MK 0.75 NL 1.00* OV 1.00* ! PT 0.95 SC 1.00* ! ! ! Fit before self-cal, rms=0.092933Jy sigma=0.000673 ! Fit after self-cal, rms=0.091734Jy sigma=0.000669 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.116 mas, bmaj=8.002 mas, bpa=-4.868 degrees ! Estimated noise=1065.98 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000769905 Jy ! Component: 100 - total flux cleaned = -0.000825575 Jy ! Component: 150 - total flux cleaned = -0.000871253 Jy ! Component: 200 - total flux cleaned = -0.000909935 Jy ! Total flux subtracted in 200 components = -0.000909935 Jy ! Clean residual min=-0.003696 max=0.003884 Jy/beam ! Clean residual mean=0.000003 rms=0.000947 Jy/beam ! Combined flux in latest and established models = 0.0973154 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 29 components and 0.0973154 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.091675Jy sigma=0.000669 ! Fit after self-cal, rms=0.091685Jy sigma=0.000668 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.091685Jy sigma=0.000668 ! Fit after self-cal, rms=0.095177Jy sigma=0.000663 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.118 mas, bmaj=8.122 mas, bpa=-4.079 degrees ! Estimated noise=1066.73 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000186581 Jy ! Component: 100 - total flux cleaned = -0.000127635 Jy ! Component: 150 - total flux cleaned = -8.16806e-05 Jy ! Component: 200 - total flux cleaned = -3.90903e-05 Jy ! Total flux subtracted in 200 components = -3.90903e-05 Jy ! Clean residual min=-0.002715 max=0.002743 Jy/beam ! Clean residual mean=0.000002 rms=0.000696 Jy/beam ! Combined flux in latest and established models = 0.0972763 Jy selfcal ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 39 components and 0.0972763 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.095157Jy sigma=0.000663 ! Fit after self-cal, rms=0.095314Jy sigma=0.000662 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -2.63132e-05 Jy ! Component: 100 - total flux cleaned = 2.76766e-05 Jy ! Component: 150 - total flux cleaned = 6.11806e-05 Jy ! Component: 200 - total flux cleaned = 7.65393e-05 Jy ! Total flux subtracted in 200 components = 7.65393e-05 Jy ! Clean residual min=-0.002740 max=0.002815 Jy/beam ! Clean residual mean=0.000002 rms=0.000701 Jy/beam ! Combined flux in latest and established models = 0.0973529 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 41 components and 0.0973529 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.095306Jy sigma=0.000662 ! Fit after self-cal, rms=0.095304Jy sigma=0.000662 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.095304Jy sigma=0.000662 ! Fit after self-cal, rms=0.096506Jy sigma=0.000662 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.119 mas, bmaj=8.163 mas, bpa=-4.072 degrees ! Estimated noise=1067.68 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -7.4848e-05 Jy ! Component: 100 - total flux cleaned = -7.51917e-05 Jy ! Component: 150 - total flux cleaned = -3.94386e-05 Jy ! Component: 200 - total flux cleaned = -6.33063e-06 Jy ! Total flux subtracted in 200 components = -6.33063e-06 Jy ! Clean residual min=-0.002729 max=0.002773 Jy/beam ! Clean residual mean=0.000002 rms=0.000693 Jy/beam ! Combined flux in latest and established models = 0.0973465 Jy selfcal ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 42 components and 0.0973465 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.096494Jy sigma=0.000662 ! Fit after self-cal, rms=0.096511Jy sigma=0.000662 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -1.11316e-05 Jy ! Component: 100 - total flux cleaned = 3.68138e-05 Jy ! Component: 150 - total flux cleaned = 6.56808e-05 Jy ! Component: 200 - total flux cleaned = 9.3076e-05 Jy ! Total flux subtracted in 200 components = 9.3076e-05 Jy ! Clean residual min=-0.002720 max=0.002784 Jy/beam ! Clean residual mean=0.000002 rms=0.000693 Jy/beam ! Combined flux in latest and established models = 0.0974396 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 44 components and 0.0974396 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.096505Jy sigma=0.000662 ! Fit after self-cal, rms=0.096504Jy sigma=0.000662 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.096504Jy sigma=0.000662 ! Fit after self-cal, rms=0.096750Jy sigma=0.000662 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.624 mas, bmaj=16.71 mas, bpa=-3.887 degrees ! Estimated noise=1384.13 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -3.05944e-05 Jy ! Component: 100 - total flux cleaned = -9.56716e-06 Jy ! Component: 150 - total flux cleaned = -1.10225e-07 Jy ! Component: 200 - total flux cleaned = 1.65214e-05 Jy ! Total flux subtracted in 200 components = 1.65214e-05 Jy ! Clean residual min=-0.003332 max=0.002946 Jy/beam ! Clean residual mean=0.000002 rms=0.000904 Jy/beam ! Combined flux in latest and established models = 0.0974561 Jy selfcal ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 50 components and 0.0974561 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.096750Jy sigma=0.000662 ! Fit after self-cal, rms=0.096752Jy sigma=0.000662 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -2.08642e-05 Jy ! Component: 100 - total flux cleaned = -3.95481e-06 Jy ! Component: 150 - total flux cleaned = 3.91138e-06 Jy ! Component: 200 - total flux cleaned = 1.70131e-05 Jy ! Total flux subtracted in 200 components = 1.70131e-05 Jy ! Clean residual min=-0.003331 max=0.002958 Jy/beam ! Clean residual mean=0.000002 rms=0.000903 Jy/beam ! Combined flux in latest and established models = 0.0974731 Jy ! Performing phase self-cal ! Adding 6 model components to the UV plane model. ! The established model now contains 52 components and 0.0974731 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.096753Jy sigma=0.000662 ! Fit after self-cal, rms=0.096750Jy sigma=0.000662 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.118 mas, bmaj=8.186 mas, bpa=-4.092 degrees ! Estimated noise=1067.66 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.118 x 8.186 at -4.092 degrees (North through East) ! Clean map min=-0.0025972 max=0.09125 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.477 mas, bmaj=7.025 mas, bpa=-7.216 degrees ! Estimated noise=1790.27 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0708578 Jy ! Component: 100 - total flux cleaned = 0.0865898 Jy ! Component: 150 - total flux cleaned = 0.0922985 Jy ! Component: 200 - total flux cleaned = 0.095574 Jy ! Total flux subtracted in 200 components = 0.095574 Jy ! Clean residual min=-0.004802 max=0.004969 Jy/beam ! Clean residual mean=0.000001 rms=0.001234 Jy/beam ! Combined flux in latest and established models = 0.095574 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 15 model components to the UV plane model. ! The established model now contains 15 components and 0.095574 Jy ! Inverting map and beam ! Estimated beam: bmin=3.118 mas, bmaj=8.186 mas, bpa=-4.092 degrees ! Estimated noise=1067.66 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00186686 Jy ! Component: 100 - total flux cleaned = 0.00210997 Jy ! Component: 150 - total flux cleaned = 0.0022282 Jy ! Component: 200 - total flux cleaned = 0.00226178 Jy ! Total flux subtracted in 200 components = 0.00226178 Jy ! Clean residual min=-0.002663 max=0.002763 Jy/beam ! Clean residual mean=0.000002 rms=0.000698 Jy/beam ! Combined flux in latest and established models = 0.0978358 Jy ! Adding 10 model components to the UV plane model. ! The established model now contains 24 components and 0.0978358 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.624 mas, bmaj=16.71 mas, bpa=-3.887 degrees ! Estimated noise=1384.13 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000115882 Jy ! Component: 100 - total flux cleaned = -0.000117873 Jy ! Component: 150 - total flux cleaned = -0.000126346 Jy ! Component: 200 - total flux cleaned = -0.000125803 Jy ! Total flux subtracted in 200 components = -0.000125803 Jy ! Clean residual min=-0.003260 max=0.002955 Jy/beam ! Clean residual mean=0.000002 rms=0.000903 Jy/beam ! Combined flux in latest and established models = 0.09771 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 6.74957e-06 Jy ! Component: 100 - total flux cleaned = 6.98732e-06 Jy ! Component: 150 - total flux cleaned = 1.23242e-05 Jy ! Component: 200 - total flux cleaned = 7.03764e-06 Jy ! Total flux subtracted in 200 components = 7.03764e-06 Jy ! Clean residual min=-0.003266 max=0.002969 Jy/beam ! Clean residual mean=0.000002 rms=0.000902 Jy/beam ! Combined flux in latest and established models = 0.0977171 Jy ! Adding 14 model components to the UV plane model. ! The established model now contains 33 components and 0.0977171 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.118 mas, bmaj=8.186 mas, bpa=-4.092 degrees ! Estimated noise=1067.66 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 8.35613e-05 Jy ! Component: 100 - total flux cleaned = 0.000175006 Jy ! Component: 150 - total flux cleaned = 0.000155355 Jy ! Component: 200 - total flux cleaned = 0.000137225 Jy ! Total flux subtracted in 200 components = 0.000137225 Jy ! Clean residual min=-0.002677 max=0.002747 Jy/beam ! Clean residual mean=0.000002 rms=0.000694 Jy/beam ! Combined flux in latest and established models = 0.0978543 Jy selfcal ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 36 components and 0.0978543 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.096753Jy sigma=0.000662 ! Fit after self-cal, rms=0.096734Jy sigma=0.000662 wmodel J0807-1531_S_2017_08_12_pus_map.mod ! Writing 36 model components to file: J0807-1531_S_2017_08_12_pus_map.mod wobs J0807-1531_S_2017_08_12_pus_uvs.fits ! Writing UV FITS file: J0807-1531_S_2017_08_12_pus_uvs.fits wwins J0807-1531_S_2017_08_12_pus_map.win ! wwins: Wrote 1 windows to J0807-1531_S_2017_08_12_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.000421286 Jy ! Component: 100 - total flux cleaned = 0.000328991 Jy ! Component: 150 - total flux cleaned = 6.21614e-05 Jy ! Component: 200 - total flux cleaned = -6.5936e-05 Jy ! Component: 250 - total flux cleaned = -0.000271047 Jy ! Component: 300 - total flux cleaned = -0.000390151 Jy ! Component: 350 - total flux cleaned = -0.00058077 Jy ! Component: 400 - total flux cleaned = -0.000691452 Jy ! Component: 450 - total flux cleaned = -0.000762869 Jy ! Component: 500 - total flux cleaned = -0.00079712 Jy ! Component: 550 - total flux cleaned = -0.000763388 Jy ! Component: 600 - total flux cleaned = -0.000664612 Jy ! Component: 650 - total flux cleaned = -0.000633103 Jy ! Component: 700 - total flux cleaned = -0.00066499 Jy ! Component: 750 - total flux cleaned = -0.000633439 Jy ! Component: 800 - total flux cleaned = -0.00066355 Jy ! Component: 850 - total flux cleaned = -0.000604517 Jy ! Component: 900 - total flux cleaned = -0.000692638 Jy ! Component: 950 - total flux cleaned = -0.000721507 Jy ! Component: 1000 - total flux cleaned = -0.000778552 Jy ! Component: 1050 - total flux cleaned = -0.000805867 Jy ! Component: 1100 - total flux cleaned = -0.000805386 Jy ! Component: 1150 - total flux cleaned = -0.000778997 Jy ! Component: 1200 - total flux cleaned = -0.000857833 Jy ! Component: 1250 - total flux cleaned = -0.00083234 Jy ! Component: 1300 - total flux cleaned = -0.000908804 Jy ! Component: 1350 - total flux cleaned = -0.000858636 Jy ! Component: 1400 - total flux cleaned = -0.000858846 Jy ! Component: 1450 - total flux cleaned = -0.000858774 Jy ! Component: 1500 - total flux cleaned = -0.000858643 Jy ! Component: 1550 - total flux cleaned = -0.000811462 Jy ! Component: 1600 - total flux cleaned = -0.000764972 Jy ! Component: 1650 - total flux cleaned = -0.00069596 Jy ! Component: 1700 - total flux cleaned = -0.0006963 Jy ! Component: 1750 - total flux cleaned = -0.000718671 Jy ! Component: 1800 - total flux cleaned = -0.000718644 Jy ! Component: 1850 - total flux cleaned = -0.00069734 Jy ! Component: 1900 - total flux cleaned = -0.000740429 Jy ! Component: 1950 - total flux cleaned = -0.000718991 Jy ! Component: 2000 - total flux cleaned = -0.000761228 Jy ! Component: 2050 - total flux cleaned = -0.000782015 Jy ! Component: 2100 - total flux cleaned = -0.000802766 Jy ! Component: 2150 - total flux cleaned = -0.000823096 Jy ! Component: 2200 - total flux cleaned = -0.000802876 Jy ! Component: 2250 - total flux cleaned = -0.000822482 Jy ! Component: 2300 - total flux cleaned = -0.000783415 Jy ! Component: 2350 - total flux cleaned = -0.000822509 Jy ! Component: 2400 - total flux cleaned = -0.000841937 Jy ! Component: 2450 - total flux cleaned = -0.00084203 Jy ! Component: 2500 - total flux cleaned = -0.000823315 Jy ! Component: 2550 - total flux cleaned = -0.000879548 Jy ! Component: 2600 - total flux cleaned = -0.000842112 Jy ! Component: 2650 - total flux cleaned = -0.000823879 Jy ! Component: 2700 - total flux cleaned = -0.000842196 Jy ! Component: 2750 - total flux cleaned = -0.000806154 Jy ! Component: 2800 - total flux cleaned = -0.000824022 Jy ! Component: 2850 - total flux cleaned = -0.000824069 Jy ! Component: 2900 - total flux cleaned = -0.000876949 Jy ! Component: 2950 - total flux cleaned = -0.00096406 Jy ! Component: 3000 - total flux cleaned = -0.000981386 Jy ! Component: 3050 - total flux cleaned = -0.000998472 Jy ! Component: 3100 - total flux cleaned = -0.00103258 Jy ! Component: 3150 - total flux cleaned = -0.00109997 Jy ! Component: 3200 - total flux cleaned = -0.00113325 Jy ! Component: 3250 - total flux cleaned = -0.00111662 Jy ! Component: 3300 - total flux cleaned = -0.00121525 Jy ! Component: 3350 - total flux cleaned = -0.00124776 Jy ! Component: 3400 - total flux cleaned = -0.00124761 Jy ! Component: 3450 - total flux cleaned = -0.00123146 Jy ! Component: 3500 - total flux cleaned = -0.00126336 Jy ! Component: 3550 - total flux cleaned = -0.00129503 Jy ! Component: 3600 - total flux cleaned = -0.00127935 Jy ! Component: 3650 - total flux cleaned = -0.00132625 Jy ! Component: 3700 - total flux cleaned = -0.00134167 Jy ! Component: 3750 - total flux cleaned = -0.00131088 Jy ! Component: 3800 - total flux cleaned = -0.00134144 Jy ! Component: 3850 - total flux cleaned = -0.00132635 Jy ! Component: 3900 - total flux cleaned = -0.00132638 Jy ! Component: 3950 - total flux cleaned = -0.00138643 Jy ! Component: 4000 - total flux cleaned = -0.00135657 Jy ! Component: 4050 - total flux cleaned = -0.00141587 Jy ! Total flux subtracted in 4096 components = -0.0014012 Jy ! Clean residual min=-0.001144 max=0.000955 Jy/beam ! Clean residual mean=-0.000001 rms=0.000261 Jy/beam ! Combined flux in latest and established models = 0.0964531 Jy keep ! Adding 256 model components to the UV plane model. ! The established model now contains 292 components and 0.0964531 Jy ![Exited script file: muppet] wmap "J0807-1531_S_2017_08_12_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.118 x 8.186 at -4.092 degrees (North through East) ! Clean map min=-0.0016337 max=0.091489 Jy/beam ! Writing clean map to FITS file: J0807-1531_S_2017_08_12_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.0914885 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000258485 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.8476 0.8476 1.6952 3.3904 6.7808 13.5616 27.1232 54.2464 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0007 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.091 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.118 x 8.186 at -4.092 degrees (North through East) ! Clean map min=-0.0016337 max=0.091489 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J0807-1531_S_2017_08_12_pus_uvs.log closed on Fri May 10 14:55:42 2019