! Started logfile: J0807+0708_S_2017_03_23_pus_uvs.log on Mon May 13 09:54:24 2019 obs J0807+0708_S_2017_03_23_pus_uva.fits ! Reading UV FITS file: J0807+0708_S_2017_03_23_pus_uva.fits ! AN table 1: 82 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.956911 visibilities/baseline/integration-bin. ! Found source: J0807+0708 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 481 lines of history. ! ! Reading 14124 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J0807+0708_S_2017_03_23_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 21 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 21 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 21 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 270 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.945026Jy sigma=0.008307 ! Fit after self-cal, rms=0.929862Jy sigma=0.008195 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.889 mas, bmaj=7.157 mas, bpa=-7.184 degrees ! Estimated noise=987.078 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0539873 Jy ! Component: 100 - total flux cleaned = 0.0687234 Jy ! Total flux subtracted in 100 components = 0.0687234 Jy ! Clean residual min=-0.004592 max=0.006220 Jy/beam ! Clean residual mean=-0.000020 rms=0.001181 Jy/beam ! Combined flux in latest and established models = 0.0687234 Jy ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 8 components and 0.0687234 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.092680Jy sigma=0.000707 ! Fit after self-cal, rms=0.092637Jy sigma=0.000707 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.465 mas, bmaj=7.77 mas, bpa=-4.77 degrees ! Estimated noise=740.536 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00813926 Jy ! Component: 100 - total flux cleaned = 0.0116559 Jy ! Component: 150 - total flux cleaned = 0.0135199 Jy ! Component: 200 - total flux cleaned = 0.0145647 Jy ! Total flux subtracted in 200 components = 0.0145647 Jy ! Clean residual min=-0.003609 max=0.005037 Jy/beam ! Clean residual mean=-0.000007 rms=0.000984 Jy/beam ! Combined flux in latest and established models = 0.0832881 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 22 components and 0.0832881 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.091894Jy sigma=0.000701 ! Fit after self-cal, rms=0.091882Jy sigma=0.000701 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.03 FD 0.98 HN 0.92 KP 1.04 ! LA 0.97 MK 1.31 NL 0.88 OV 1.33 ! PT 0.96 SC 0.99 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.07 FD 0.99 HN 0.98 KP 0.98 ! LA 0.92 MK 1.68 NL 1.05 OV 1.07 ! PT 1.00 SC 1.01 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.86 FD 1.07 HN 0.98 KP 0.89 ! LA 0.74 MK 1.04 NL 1.10 OV 0.99 ! PT 0.95 SC 1.00 ! ! ! Correcting IF 4. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.09 FD 1.14 HN 0.85 KP 1.00* ! LA 0.82 MK 0.73 NL 1.00* OV 1.07 ! PT 1.04 SC 1.00* ! ! ! Fit before self-cal, rms=0.091882Jy sigma=0.000701 ! Fit after self-cal, rms=0.089164Jy sigma=0.000693 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.565 mas, bmaj=7.815 mas, bpa=-3.982 degrees ! Estimated noise=746.346 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.0010989 Jy ! Component: 100 - total flux cleaned = -0.00130713 Jy ! Component: 150 - total flux cleaned = -0.00137048 Jy ! Component: 200 - total flux cleaned = -0.00142094 Jy ! Total flux subtracted in 200 components = -0.00142094 Jy ! Clean residual min=-0.003022 max=0.003501 Jy/beam ! Clean residual mean=-0.000003 rms=0.000833 Jy/beam ! Combined flux in latest and established models = 0.0818672 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 34 components and 0.0818672 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.089114Jy sigma=0.000693 ! Fit after self-cal, rms=0.089179Jy sigma=0.000692 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.089179Jy sigma=0.000692 ! Fit after self-cal, rms=0.109260Jy sigma=0.000677 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.558 mas, bmaj=7.814 mas, bpa=-4.385 degrees ! Estimated noise=755.045 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000386577 Jy ! Component: 100 - total flux cleaned = 0.000417855 Jy ! Component: 150 - total flux cleaned = 0.000394775 Jy ! Component: 200 - total flux cleaned = 0.000331766 Jy ! Total flux subtracted in 200 components = 0.000331766 Jy ! Clean residual min=-0.002154 max=0.002966 Jy/beam ! Clean residual mean=0.000008 rms=0.000624 Jy/beam ! Combined flux in latest and established models = 0.0821989 Jy selfcal ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 47 components and 0.0821989 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.109180Jy sigma=0.000677 ! Fit after self-cal, rms=0.110656Jy sigma=0.000674 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-32.5, -123.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00147522 Jy ! Component: 100 - total flux cleaned = 0.00122967 Jy ! Component: 150 - total flux cleaned = 0.000913893 Jy ! Component: 200 - total flux cleaned = 0.000643277 Jy ! Total flux subtracted in 200 components = 0.000643277 Jy ! Clean residual min=-0.002061 max=0.002381 Jy/beam ! Clean residual mean=0.000004 rms=0.000559 Jy/beam ! Combined flux in latest and established models = 0.0828422 Jy ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 63 components and 0.0828422 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.110571Jy sigma=0.000674 ! Fit after self-cal, rms=0.110493Jy sigma=0.000674 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.110493Jy sigma=0.000674 ! Fit after self-cal, rms=0.119328Jy sigma=0.000673 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.554 mas, bmaj=7.828 mas, bpa=-4.639 degrees ! Estimated noise=760.005 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000622317 Jy ! Component: 100 - total flux cleaned = 0.000525427 Jy ! Component: 150 - total flux cleaned = 0.000411346 Jy ! Component: 200 - total flux cleaned = 0.000334323 Jy ! Total flux subtracted in 200 components = 0.000334323 Jy ! Clean residual min=-0.002043 max=0.002308 Jy/beam ! Clean residual mean=0.000005 rms=0.000551 Jy/beam ! Combined flux in latest and established models = 0.0831765 Jy selfcal ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 70 components and 0.0831765 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.119265Jy sigma=0.000673 ! Fit after self-cal, rms=0.119583Jy sigma=0.000673 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000143644 Jy ! Component: 100 - total flux cleaned = -0.000258777 Jy ! Component: 150 - total flux cleaned = -0.00034429 Jy ! Component: 200 - total flux cleaned = -0.000404389 Jy ! Total flux subtracted in 200 components = -0.000404389 Jy ! Clean residual min=-0.002005 max=0.002210 Jy/beam ! Clean residual mean=0.000004 rms=0.000541 Jy/beam ! Combined flux in latest and established models = 0.0827721 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 74 components and 0.0827721 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.119560Jy sigma=0.000673 ! Fit after self-cal, rms=0.119555Jy sigma=0.000673 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.119555Jy sigma=0.000673 ! Fit after self-cal, rms=0.121606Jy sigma=0.000673 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.639 mas, bmaj=11.44 mas, bpa=-3.125 degrees ! Estimated noise=918.767 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000748749 Jy ! Component: 100 - total flux cleaned = 0.00078346 Jy ! Component: 150 - total flux cleaned = 0.000798914 Jy ! Component: 200 - total flux cleaned = 0.000799124 Jy ! Total flux subtracted in 200 components = 0.000799124 Jy ! Clean residual min=-0.002516 max=0.002739 Jy/beam ! Clean residual mean=0.000008 rms=0.000652 Jy/beam ! Combined flux in latest and established models = 0.0835713 Jy selfcal ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 88 components and 0.0835713 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.121588Jy sigma=0.000673 ! Fit after self-cal, rms=0.121634Jy sigma=0.000673 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000139886 Jy ! Component: 100 - total flux cleaned = 0.000140068 Jy ! Component: 150 - total flux cleaned = 0.000140287 Jy ! Component: 200 - total flux cleaned = 0.000128824 Jy ! Total flux subtracted in 200 components = 0.000128824 Jy ! Clean residual min=-0.002513 max=0.002751 Jy/beam ! Clean residual mean=0.000008 rms=0.000648 Jy/beam ! Combined flux in latest and established models = 0.0837001 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 92 components and 0.0837001 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.121629Jy sigma=0.000673 ! Fit after self-cal, rms=0.121626Jy sigma=0.000673 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.555 mas, bmaj=7.84 mas, bpa=-4.725 degrees ! Estimated noise=763.689 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.555 x 7.84 at -4.725 degrees (North through East) ! Clean map min=-0.0019552 max=0.073684 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.957 mas, bmaj=7.191 mas, bpa=-7.366 degrees ! Estimated noise=1030.95 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0557839 Jy ! Component: 100 - total flux cleaned = 0.0707659 Jy ! Component: 150 - total flux cleaned = 0.0775755 Jy ! Component: 200 - total flux cleaned = 0.0817341 Jy ! Total flux subtracted in 200 components = 0.0817341 Jy ! Clean residual min=-0.003250 max=0.003259 Jy/beam ! Clean residual mean=0.000003 rms=0.000842 Jy/beam ! Combined flux in latest and established models = 0.0817342 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 21 model components to the UV plane model. ! The established model now contains 21 components and 0.0817342 Jy ! Inverting map and beam ! Estimated beam: bmin=3.555 mas, bmaj=7.84 mas, bpa=-4.725 degrees ! Estimated noise=763.689 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00230088 Jy ! Component: 100 - total flux cleaned = 0.00268473 Jy ! Component: 150 - total flux cleaned = 0.00263044 Jy ! Component: 200 - total flux cleaned = 0.00252321 Jy ! Total flux subtracted in 200 components = 0.00252321 Jy ! Clean residual min=-0.002061 max=0.002228 Jy/beam ! Clean residual mean=0.000004 rms=0.000556 Jy/beam ! Combined flux in latest and established models = 0.0842574 Jy ! Adding 22 model components to the UV plane model. ! The established model now contains 40 components and 0.0842574 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.639 mas, bmaj=11.44 mas, bpa=-3.125 degrees ! Estimated noise=918.767 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000289128 Jy ! Component: 100 - total flux cleaned = 0.000105083 Jy ! Component: 150 - total flux cleaned = 1.5765e-05 Jy ! Component: 200 - total flux cleaned = -8.7796e-05 Jy ! Total flux subtracted in 200 components = -8.7796e-05 Jy ! Clean residual min=-0.002495 max=0.002678 Jy/beam ! Clean residual mean=0.000008 rms=0.000649 Jy/beam ! Combined flux in latest and established models = 0.0841696 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -9.58312e-05 Jy ! Component: 100 - total flux cleaned = -0.000184359 Jy ! Component: 150 - total flux cleaned = -0.000266653 Jy ! Component: 200 - total flux cleaned = -0.000342323 Jy ! Total flux subtracted in 200 components = -0.000342323 Jy ! Clean residual min=-0.002501 max=0.002712 Jy/beam ! Clean residual mean=0.000008 rms=0.000649 Jy/beam ! Combined flux in latest and established models = 0.0838273 Jy ! Adding 16 model components to the UV plane model. ! The established model now contains 51 components and 0.0838272 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.555 mas, bmaj=7.84 mas, bpa=-4.725 degrees ! Estimated noise=763.689 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000138338 Jy ! Component: 100 - total flux cleaned = -0.000308347 Jy ! Component: 150 - total flux cleaned = -0.00045797 Jy ! Component: 200 - total flux cleaned = -0.000568474 Jy ! Total flux subtracted in 200 components = -0.000568474 Jy ! Clean residual min=-0.002046 max=0.002244 Jy/beam ! Clean residual mean=0.000004 rms=0.000546 Jy/beam ! Combined flux in latest and established models = 0.0832588 Jy selfcal ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 67 components and 0.0832588 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.121661Jy sigma=0.000673 ! Fit after self-cal, rms=0.121668Jy sigma=0.000673 wmodel J0807+0708_S_2017_03_23_pus_map.mod ! Writing 67 model components to file: J0807+0708_S_2017_03_23_pus_map.mod wobs J0807+0708_S_2017_03_23_pus_uvs.fits ! Writing UV FITS file: J0807+0708_S_2017_03_23_pus_uvs.fits wwins J0807+0708_S_2017_03_23_pus_map.win ! wwins: Wrote 2 windows to J0807+0708_S_2017_03_23_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.00067819 Jy ! Component: 100 - total flux cleaned = 0.0012736 Jy ! Component: 150 - total flux cleaned = 0.00180871 Jy ! Component: 200 - total flux cleaned = 0.00236171 Jy ! Component: 250 - total flux cleaned = 0.00289899 Jy ! Component: 300 - total flux cleaned = 0.00335701 Jy ! Component: 350 - total flux cleaned = 0.00364454 Jy ! Component: 400 - total flux cleaned = 0.00392613 Jy ! Component: 450 - total flux cleaned = 0.00420218 Jy ! Component: 500 - total flux cleaned = 0.0044428 Jy ! Component: 550 - total flux cleaned = 0.00464994 Jy ! Component: 600 - total flux cleaned = 0.00488248 Jy ! Component: 650 - total flux cleaned = 0.00502553 Jy ! Component: 700 - total flux cleaned = 0.00522272 Jy ! Component: 750 - total flux cleaned = 0.00541712 Jy ! Component: 800 - total flux cleaned = 0.00552647 Jy ! Component: 850 - total flux cleaned = 0.00566133 Jy ! Component: 900 - total flux cleaned = 0.00574113 Jy ! Component: 950 - total flux cleaned = 0.00581985 Jy ! Component: 1000 - total flux cleaned = 0.00589801 Jy ! Component: 1050 - total flux cleaned = 0.00600077 Jy ! Component: 1100 - total flux cleaned = 0.00602601 Jy ! Component: 1150 - total flux cleaned = 0.00610172 Jy ! Component: 1200 - total flux cleaned = 0.00612677 Jy ! Component: 1250 - total flux cleaned = 0.00625039 Jy ! Component: 1300 - total flux cleaned = 0.00629933 Jy ! Component: 1350 - total flux cleaned = 0.00642055 Jy ! Component: 1400 - total flux cleaned = 0.00644465 Jy ! Component: 1450 - total flux cleaned = 0.00656361 Jy ! Component: 1500 - total flux cleaned = 0.00670503 Jy ! Component: 1550 - total flux cleaned = 0.00677463 Jy ! Component: 1600 - total flux cleaned = 0.00679742 Jy ! Component: 1650 - total flux cleaned = 0.00682044 Jy ! Component: 1700 - total flux cleaned = 0.0069803 Jy ! Component: 1750 - total flux cleaned = 0.00700285 Jy ! Component: 1800 - total flux cleaned = 0.00711531 Jy ! Component: 1850 - total flux cleaned = 0.00716013 Jy ! Component: 1900 - total flux cleaned = 0.00731504 Jy ! Component: 1950 - total flux cleaned = 0.00735898 Jy ! Component: 2000 - total flux cleaned = 0.00753387 Jy ! Component: 2050 - total flux cleaned = 0.00759903 Jy ! Component: 2100 - total flux cleaned = 0.00772794 Jy ! Component: 2150 - total flux cleaned = 0.00783471 Jy ! Component: 2200 - total flux cleaned = 0.00787701 Jy ! Component: 2250 - total flux cleaned = 0.00791919 Jy ! Component: 2300 - total flux cleaned = 0.00802404 Jy ! Component: 2350 - total flux cleaned = 0.00810743 Jy ! Component: 2400 - total flux cleaned = 0.00812817 Jy ! Component: 2450 - total flux cleaned = 0.00818994 Jy ! Component: 2500 - total flux cleaned = 0.00829228 Jy ! Component: 2550 - total flux cleaned = 0.00829225 Jy ! Component: 2600 - total flux cleaned = 0.00837318 Jy ! Component: 2650 - total flux cleaned = 0.00853405 Jy ! Component: 2700 - total flux cleaned = 0.00849415 Jy ! Component: 2750 - total flux cleaned = 0.00853406 Jy ! Component: 2800 - total flux cleaned = 0.00861302 Jy ! Component: 2850 - total flux cleaned = 0.00869164 Jy ! Component: 2900 - total flux cleaned = 0.00876985 Jy ! Component: 2950 - total flux cleaned = 0.00880854 Jy ! Component: 3000 - total flux cleaned = 0.00884717 Jy ! Component: 3050 - total flux cleaned = 0.00890481 Jy ! Component: 3100 - total flux cleaned = 0.00900047 Jy ! Component: 3150 - total flux cleaned = 0.00905755 Jy ! Component: 3200 - total flux cleaned = 0.00907644 Jy ! Component: 3250 - total flux cleaned = 0.00909514 Jy ! Component: 3300 - total flux cleaned = 0.00917022 Jy ! Component: 3350 - total flux cleaned = 0.0092075 Jy ! Component: 3400 - total flux cleaned = 0.00924464 Jy ! Component: 3450 - total flux cleaned = 0.00928155 Jy ! Component: 3500 - total flux cleaned = 0.00939159 Jy ! Component: 3550 - total flux cleaned = 0.00942809 Jy ! Component: 3600 - total flux cleaned = 0.00944622 Jy ! Component: 3650 - total flux cleaned = 0.00946428 Jy ! Component: 3700 - total flux cleaned = 0.00953615 Jy ! Component: 3750 - total flux cleaned = 0.00957199 Jy ! Component: 3800 - total flux cleaned = 0.0096253 Jy ! Component: 3850 - total flux cleaned = 0.00964292 Jy ! Component: 3900 - total flux cleaned = 0.00966067 Jy ! Component: 3950 - total flux cleaned = 0.00974835 Jy ! Component: 4000 - total flux cleaned = 0.00980089 Jy ! Component: 4050 - total flux cleaned = 0.0098704 Jy ! Total flux subtracted in 4096 components = 0.00992216 Jy ! Clean residual min=-0.001003 max=0.001153 Jy/beam ! Clean residual mean=0.000002 rms=0.000328 Jy/beam ! Combined flux in latest and established models = 0.0931809 Jy keep ! Adding 293 model components to the UV plane model. ! The established model now contains 360 components and 0.0931809 Jy ![Exited script file: muppet] wmap "J0807+0708_S_2017_03_23_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.555 x 7.84 at -4.725 degrees (North through East) ! Clean map min=-0.001618 max=0.073851 Jy/beam ! Writing clean map to FITS file: J0807+0708_S_2017_03_23_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.0738514 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000327749 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -1.33139 1.33139 2.66277 5.32555 10.6511 21.3022 42.6044 85.2087 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0009 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.073 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.555 x 7.84 at -4.725 degrees (North through East) ! Clean map min=-0.001618 max=0.073851 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J0807+0708_S_2017_03_23_pus_uvs.log closed on Mon May 13 09:54:29 2019