! Started logfile: J0806-0454_S_2017_01_16_pus_uvs.log on Sun Apr 7 15:08:55 2019 obs J0806-0454_S_2017_01_16_pus_uva.fits ! Reading UV FITS file: J0806-0454_S_2017_01_16_pus_uva.fits ! AN table 1: 172 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.7823 visibilities/baseline/integration-bin. ! Found source: J0806-0454 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 622 lines of history. ! ! Reading 24220 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J0806-0454_S_2017_01_16_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 192 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 192 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 192 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 578 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=1.003907Jy sigma=0.007480 ! Fit after self-cal, rms=0.957167Jy sigma=0.007249 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.409 mas, bmaj=10.05 mas, bpa=17.76 degrees ! Estimated noise=918.175 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0407894 Jy ! Component: 100 - total flux cleaned = 0.0493619 Jy ! Total flux subtracted in 100 components = 0.0493619 Jy ! Clean residual min=-0.003584 max=0.005012 Jy/beam ! Clean residual mean=-0.000000 rms=0.001139 Jy/beam ! Combined flux in latest and established models = 0.0493619 Jy ! Performing phase self-cal ! Adding 2 model components to the UV plane model. ! The established model now contains 2 components and 0.0493619 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.195303Jy sigma=0.000711 ! Fit after self-cal, rms=0.194763Jy sigma=0.000703 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=4.134 mas, bmaj=10.73 mas, bpa=17.19 degrees ! Estimated noise=656.488 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00190803 Jy ! Component: 100 - total flux cleaned = 0.0020079 Jy ! Component: 150 - total flux cleaned = 0.00196497 Jy ! Component: 200 - total flux cleaned = 0.00196581 Jy ! Total flux subtracted in 200 components = 0.00196581 Jy ! Clean residual min=-0.003196 max=0.004530 Jy/beam ! Clean residual mean=0.000004 rms=0.000978 Jy/beam ! Combined flux in latest and established models = 0.0513277 Jy ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 20 components and 0.0513277 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.194508Jy sigma=0.000703 ! Fit after self-cal, rms=0.194492Jy sigma=0.000703 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.07 FD 1.02 HN 1.03 KP 1.04 ! LA 1.06 MK 1.00* NL 0.92 OV 1.08 ! PT 1.11 SC 1.04 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.04 FD 1.07 HN 1.17 KP 1.10 ! LA 1.07 MK 1.00* NL 1.03 OV 1.18 ! PT 1.09 SC 1.02 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.01 FD 1.08 HN 1.08 KP 1.08 ! LA 1.06 MK 1.00* NL 0.97 OV 1.08 ! PT 1.05 SC 1.07 ! ! ! Correcting IF 4. ! A total of 9 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.81 FD 0.85 HN 0.85 KP 0.50 ! LA 0.69 MK 1.00* NL 1.00* OV 0.81 ! PT 0.80 SC 0.67 ! ! ! Fit before self-cal, rms=0.194492Jy sigma=0.000703 ! Fit after self-cal, rms=0.139278Jy sigma=0.000698 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=4.117 mas, bmaj=10.68 mas, bpa=17.35 degrees ! Estimated noise=683.472 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00232474 Jy ! Component: 100 - total flux cleaned = 0.00267385 Jy ! Component: 150 - total flux cleaned = 0.00277705 Jy ! Component: 200 - total flux cleaned = 0.00285888 Jy ! Total flux subtracted in 200 components = 0.00285888 Jy ! Clean residual min=-0.002986 max=0.004312 Jy/beam ! Clean residual mean=0.000006 rms=0.001009 Jy/beam ! Combined flux in latest and established models = 0.0541865 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 33 components and 0.0541865 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.139135Jy sigma=0.000699 ! Fit after self-cal, rms=0.139097Jy sigma=0.000698 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.139097Jy sigma=0.000698 ! Fit after self-cal, rms=0.106899Jy sigma=0.000686 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=4.119 mas, bmaj=10.62 mas, bpa=17.62 degrees ! Estimated noise=716.609 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00250473 Jy ! Component: 100 - total flux cleaned = 0.00308059 Jy ! Component: 150 - total flux cleaned = 0.00331606 Jy ! Component: 200 - total flux cleaned = 0.00336272 Jy ! Total flux subtracted in 200 components = 0.00336272 Jy ! Clean residual min=-0.002504 max=0.002797 Jy/beam ! Clean residual mean=0.000003 rms=0.000723 Jy/beam ! Combined flux in latest and established models = 0.0575493 Jy selfcal ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 43 components and 0.0575493 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.106838Jy sigma=0.000686 ! Fit after self-cal, rms=0.106979Jy sigma=0.000684 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000326409 Jy ! Component: 100 - total flux cleaned = 0.00037628 Jy ! Component: 150 - total flux cleaned = 0.000338961 Jy ! Component: 200 - total flux cleaned = 0.000322437 Jy ! Total flux subtracted in 200 components = 0.000322437 Jy ! Clean residual min=-0.002599 max=0.002953 Jy/beam ! Clean residual mean=0.000003 rms=0.000779 Jy/beam ! Combined flux in latest and established models = 0.0578717 Jy ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 52 components and 0.0578717 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.106971Jy sigma=0.000684 ! Fit after self-cal, rms=0.106964Jy sigma=0.000684 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.106964Jy sigma=0.000684 ! Fit after self-cal, rms=0.109484Jy sigma=0.000674 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=4.124 mas, bmaj=10.59 mas, bpa=17.63 degrees ! Estimated noise=720.552 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -2.40917e-05 Jy ! Component: 100 - total flux cleaned = 8.19818e-05 Jy ! Component: 150 - total flux cleaned = 9.88025e-05 Jy ! Component: 200 - total flux cleaned = 8.35957e-05 Jy ! Total flux subtracted in 200 components = 8.35957e-05 Jy ! Clean residual min=-0.002205 max=0.002115 Jy/beam ! Clean residual mean=0.000003 rms=0.000443 Jy/beam ! Combined flux in latest and established models = 0.0579553 Jy selfcal ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 67 components and 0.0579553 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.109473Jy sigma=0.000674 ! Fit after self-cal, rms=0.109856Jy sigma=0.000672 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00010236 Jy ! Component: 100 - total flux cleaned = 0.000119379 Jy ! Component: 150 - total flux cleaned = 0.000119714 Jy ! Component: 200 - total flux cleaned = 0.000107945 Jy ! Total flux subtracted in 200 components = 0.000107945 Jy ! Clean residual min=-0.002168 max=0.002109 Jy/beam ! Clean residual mean=0.000003 rms=0.000457 Jy/beam ! Combined flux in latest and established models = 0.0580632 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 76 components and 0.0580632 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.109849Jy sigma=0.000672 ! Fit after self-cal, rms=0.109852Jy sigma=0.000672 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.109852Jy sigma=0.000672 ! Fit after self-cal, rms=0.113917Jy sigma=0.000672 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.913 mas, bmaj=13.43 mas, bpa=9.675 degrees ! Estimated noise=838.671 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00014259 Jy ! Component: 100 - total flux cleaned = -8.89976e-05 Jy ! Component: 150 - total flux cleaned = -4.03769e-05 Jy ! Component: 200 - total flux cleaned = -8.68024e-06 Jy ! Total flux subtracted in 200 components = -8.68024e-06 Jy ! Clean residual min=-0.002251 max=0.001972 Jy/beam ! Clean residual mean=0.000004 rms=0.000471 Jy/beam ! Combined flux in latest and established models = 0.0580546 Jy selfcal ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 92 components and 0.0580546 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.113915Jy sigma=0.000671 ! Fit after self-cal, rms=0.114057Jy sigma=0.000671 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000169417 Jy ! Component: 100 - total flux cleaned = -0.000158156 Jy ! Component: 150 - total flux cleaned = -0.00014075 Jy ! Component: 200 - total flux cleaned = -0.000119114 Jy ! Total flux subtracted in 200 components = -0.000119114 Jy ! Clean residual min=-0.002196 max=0.002053 Jy/beam ! Clean residual mean=0.000005 rms=0.000479 Jy/beam ! Combined flux in latest and established models = 0.0579355 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 98 components and 0.0579355 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.114053Jy sigma=0.000671 ! Fit after self-cal, rms=0.114047Jy sigma=0.000671 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=4.127 mas, bmaj=10.61 mas, bpa=17.76 degrees ! Estimated noise=725.091 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.127 x 10.61 at 17.76 degrees (North through East) ! Clean map min=-0.0046168 max=0.058861 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.39 mas, bmaj=9.866 mas, bpa=18.11 degrees ! Estimated noise=985.019 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0451296 Jy ! Component: 100 - total flux cleaned = 0.054043 Jy ! Component: 150 - total flux cleaned = 0.0552906 Jy ! Component: 200 - total flux cleaned = 0.0559951 Jy ! Total flux subtracted in 200 components = 0.0559951 Jy ! Clean residual min=-0.002807 max=0.002634 Jy/beam ! Clean residual mean=0.000001 rms=0.000666 Jy/beam ! Combined flux in latest and established models = 0.0559952 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 13 model components to the UV plane model. ! The established model now contains 13 components and 0.0559952 Jy ! Inverting map and beam ! Estimated beam: bmin=4.127 mas, bmaj=10.61 mas, bpa=17.76 degrees ! Estimated noise=725.091 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00178974 Jy ! Component: 100 - total flux cleaned = 0.00204968 Jy ! Component: 150 - total flux cleaned = 0.002171 Jy ! Component: 200 - total flux cleaned = 0.00220367 Jy ! Total flux subtracted in 200 components = 0.00220367 Jy ! Clean residual min=-0.002176 max=0.002030 Jy/beam ! Clean residual mean=0.000003 rms=0.000453 Jy/beam ! Combined flux in latest and established models = 0.0581988 Jy ! Adding 35 model components to the UV plane model. ! The established model now contains 46 components and 0.0581988 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.913 mas, bmaj=13.43 mas, bpa=9.675 degrees ! Estimated noise=838.671 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000166847 Jy ! Component: 100 - total flux cleaned = -0.000168839 Jy ! Component: 150 - total flux cleaned = -0.000156354 Jy ! Component: 200 - total flux cleaned = -0.0001676 Jy ! Total flux subtracted in 200 components = -0.0001676 Jy ! Clean residual min=-0.002186 max=0.002078 Jy/beam ! Clean residual mean=0.000005 rms=0.000482 Jy/beam ! Combined flux in latest and established models = 0.0580312 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -2.28591e-07 Jy ! Component: 100 - total flux cleaned = -9.92706e-06 Jy ! Component: 150 - total flux cleaned = -1.89817e-05 Jy ! Component: 200 - total flux cleaned = -3.54482e-05 Jy ! Total flux subtracted in 200 components = -3.54482e-05 Jy ! Clean residual min=-0.002180 max=0.002071 Jy/beam ! Clean residual mean=0.000005 rms=0.000481 Jy/beam ! Combined flux in latest and established models = 0.0579958 Jy ! Adding 22 model components to the UV plane model. ! The established model now contains 63 components and 0.0579958 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=4.127 mas, bmaj=10.61 mas, bpa=17.76 degrees ! Estimated noise=725.091 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -7.55454e-05 Jy ! Component: 100 - total flux cleaned = -0.00011172 Jy ! Component: 150 - total flux cleaned = -9.53886e-05 Jy ! Component: 200 - total flux cleaned = -9.56804e-05 Jy ! Total flux subtracted in 200 components = -9.56804e-05 Jy ! Clean residual min=-0.002101 max=0.001969 Jy/beam ! Clean residual mean=0.000003 rms=0.000442 Jy/beam ! Combined flux in latest and established models = 0.0579001 Jy selfcal ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 70 components and 0.0579001 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.114047Jy sigma=0.000671 ! Fit after self-cal, rms=0.114035Jy sigma=0.000671 wmodel J0806-0454_S_2017_01_16_pus_map.mod ! Writing 70 model components to file: J0806-0454_S_2017_01_16_pus_map.mod wobs J0806-0454_S_2017_01_16_pus_uvs.fits ! Writing UV FITS file: J0806-0454_S_2017_01_16_pus_uvs.fits wwins J0806-0454_S_2017_01_16_pus_map.win ! wwins: Wrote 1 windows to J0806-0454_S_2017_01_16_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000159146 Jy ! Component: 100 - total flux cleaned = -4.18892e-05 Jy ! Component: 150 - total flux cleaned = 6.53725e-05 Jy ! Component: 200 - total flux cleaned = 0.00011728 Jy ! Component: 250 - total flux cleaned = 0.000215881 Jy ! Component: 300 - total flux cleaned = 9.63183e-05 Jy ! Component: 350 - total flux cleaned = -1.95649e-05 Jy ! Component: 400 - total flux cleaned = -8.76349e-05 Jy ! Component: 450 - total flux cleaned = -0.000198594 Jy ! Component: 500 - total flux cleaned = -0.000241971 Jy ! Component: 550 - total flux cleaned = -0.000263821 Jy ! Component: 600 - total flux cleaned = -0.000306079 Jy ! Component: 650 - total flux cleaned = -0.000326799 Jy ! Component: 700 - total flux cleaned = -0.000306946 Jy ! Component: 750 - total flux cleaned = -0.000347004 Jy ! Component: 800 - total flux cleaned = -0.000386445 Jy ! Component: 850 - total flux cleaned = -0.000445114 Jy ! Component: 900 - total flux cleaned = -0.000502547 Jy ! Component: 950 - total flux cleaned = -0.000521762 Jy ! Component: 1000 - total flux cleaned = -0.000596953 Jy ! Component: 1050 - total flux cleaned = -0.000615668 Jy ! Component: 1100 - total flux cleaned = -0.000689119 Jy ! Component: 1150 - total flux cleaned = -0.000725152 Jy ! Component: 1200 - total flux cleaned = -0.000742972 Jy ! Component: 1250 - total flux cleaned = -0.000778602 Jy ! Component: 1300 - total flux cleaned = -0.00081393 Jy ! Component: 1350 - total flux cleaned = -0.000831446 Jy ! Component: 1400 - total flux cleaned = -0.000900441 Jy ! Component: 1450 - total flux cleaned = -0.000968765 Jy ! Component: 1500 - total flux cleaned = -0.000985672 Jy ! Component: 1550 - total flux cleaned = -0.00103582 Jy ! Component: 1600 - total flux cleaned = -0.00108547 Jy ! Component: 1650 - total flux cleaned = -0.00110175 Jy ! Component: 1700 - total flux cleaned = -0.00115043 Jy ! Component: 1750 - total flux cleaned = -0.00116647 Jy ! Component: 1800 - total flux cleaned = -0.00119844 Jy ! Component: 1850 - total flux cleaned = -0.00118266 Jy ! Component: 1900 - total flux cleaned = -0.00118271 Jy ! Component: 1950 - total flux cleaned = -0.00113618 Jy ! Component: 2000 - total flux cleaned = -0.00118274 Jy ! Component: 2050 - total flux cleaned = -0.00109091 Jy ! Component: 2100 - total flux cleaned = -0.00118212 Jy ! Component: 2150 - total flux cleaned = -0.00113687 Jy ! Component: 2200 - total flux cleaned = -0.00104702 Jy ! Component: 2250 - total flux cleaned = -0.00104695 Jy ! Component: 2300 - total flux cleaned = -0.0010911 Jy ! Component: 2350 - total flux cleaned = -0.00100331 Jy ! Component: 2400 - total flux cleaned = -0.000974349 Jy ! Component: 2450 - total flux cleaned = -0.000931251 Jy ! Component: 2500 - total flux cleaned = -0.000916972 Jy ! Component: 2550 - total flux cleaned = -0.000931153 Jy ! Component: 2600 - total flux cleaned = -0.000874675 Jy ! Component: 2650 - total flux cleaned = -0.00086059 Jy ! Component: 2700 - total flux cleaned = -0.000874491 Jy ! Component: 2750 - total flux cleaned = -0.000860674 Jy ! Component: 2800 - total flux cleaned = -0.000833001 Jy ! Component: 2850 - total flux cleaned = -0.000819476 Jy ! Component: 2900 - total flux cleaned = -0.000751687 Jy ! Component: 2950 - total flux cleaned = -0.000724719 Jy ! Component: 3000 - total flux cleaned = -0.000751476 Jy ! Component: 3050 - total flux cleaned = -0.000751538 Jy ! Component: 3100 - total flux cleaned = -0.000738407 Jy ! Component: 3150 - total flux cleaned = -0.000712018 Jy ! Component: 3200 - total flux cleaned = -0.000672985 Jy ! Component: 3250 - total flux cleaned = -0.000647121 Jy ! Component: 3300 - total flux cleaned = -0.0006087 Jy ! Component: 3350 - total flux cleaned = -0.000621324 Jy ! Component: 3400 - total flux cleaned = -0.000621322 Jy ! Component: 3450 - total flux cleaned = -0.000608595 Jy ! Component: 3500 - total flux cleaned = -0.000545893 Jy ! Component: 3550 - total flux cleaned = -0.000545894 Jy ! Component: 3600 - total flux cleaned = -0.000521141 Jy ! Component: 3650 - total flux cleaned = -0.000508762 Jy ! Component: 3700 - total flux cleaned = -0.000471929 Jy ! Component: 3750 - total flux cleaned = -0.000484059 Jy ! Component: 3800 - total flux cleaned = -0.000435691 Jy ! Component: 3850 - total flux cleaned = -0.000423851 Jy ! Component: 3900 - total flux cleaned = -0.000435793 Jy ! Component: 3950 - total flux cleaned = -0.000388205 Jy ! Component: 4000 - total flux cleaned = -0.000388195 Jy ! Component: 4050 - total flux cleaned = -0.00042352 Jy ! Total flux subtracted in 4096 components = -0.000365049 Jy ! Clean residual min=-0.000618 max=0.000703 Jy/beam ! Clean residual mean=0.000002 rms=0.000228 Jy/beam ! Combined flux in latest and established models = 0.0575351 Jy keep ! Adding 273 model components to the UV plane model. ! The established model now contains 343 components and 0.0575351 Jy ![Exited script file: muppet] wmap "J0806-0454_S_2017_01_16_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.127 x 10.61 at 17.76 degrees (North through East) ! Clean map min=-0.0049817 max=0.058994 Jy/beam ! Writing clean map to FITS file: J0806-0454_S_2017_01_16_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.0589942 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000226806 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -1.15337 1.15337 2.30673 4.61346 9.22693 18.4539 36.9077 73.8154 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0006 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.058 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.127 x 10.61 at 17.76 degrees (North through East) ! Clean map min=-0.0049817 max=0.058994 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J0806-0454_S_2017_01_16_pus_uvs.log closed on Sun Apr 7 15:09:01 2019