! Started logfile: J0806+7746_S_2017_01_16_pus_uvs.log on Sun Apr 7 15:09:01 2019 obs J0806+7746_S_2017_01_16_pus_uva.fits ! Reading UV FITS file: J0806+7746_S_2017_01_16_pus_uva.fits ! AN table 1: 111 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.777377 visibilities/baseline/integration-bin. ! Found source: J0806+7746 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 622 lines of history. ! ! Reading 15532 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J0806+7746_S_2017_01_16_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 127 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 127 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 127 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 372 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.926494Jy sigma=0.007325 ! Fit after self-cal, rms=0.910368Jy sigma=0.007258 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=4.275 mas, bmaj=5.029 mas, bpa=-85.76 degrees ! Estimated noise=1159.77 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.075608 Jy ! Component: 100 - total flux cleaned = 0.0920955 Jy ! Total flux subtracted in 100 components = 0.0920955 Jy ! Clean residual min=-0.003844 max=0.004600 Jy/beam ! Clean residual mean=0.000030 rms=0.001017 Jy/beam ! Combined flux in latest and established models = 0.0920955 Jy ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 0.0920955 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.128103Jy sigma=0.000668 ! Fit after self-cal, rms=0.128081Jy sigma=0.000668 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=4.966 mas, bmaj=5.951 mas, bpa=-84.68 degrees ! Estimated noise=774.802 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00428303 Jy ! Component: 100 - total flux cleaned = 0.00574154 Jy ! Component: 150 - total flux cleaned = 0.00601084 Jy ! Component: 200 - total flux cleaned = 0.00620329 Jy ! Total flux subtracted in 200 components = 0.00620329 Jy ! Clean residual min=-0.002793 max=0.003430 Jy/beam ! Clean residual mean=0.000031 rms=0.000752 Jy/beam ! Combined flux in latest and established models = 0.0982988 Jy ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 15 components and 0.0982988 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.127922Jy sigma=0.000666 ! Fit after self-cal, rms=0.127912Jy sigma=0.000666 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.08 FD 0.98 HN 0.92 KP 0.99 ! LA 1.01 MK 1.00* NL 0.83 OV 0.97 ! PT 1.01 SC 0.94 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.07 FD 0.99 HN 0.98 KP 0.96 ! LA 0.95 MK 1.00* NL 0.98 OV 1.02 ! PT 1.03 SC 1.17 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.10 FD 1.02 HN 0.97 KP 0.98 ! LA 1.02 MK 1.00* NL 0.94 OV 0.92 ! PT 1.03 SC 0.96 ! ! ! Correcting IF 4. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.09 FD 1.08 HN 1.00 KP 1.00* ! LA 1.06 MK 1.00* NL 1.00* OV 1.01 ! PT 1.00 SC 0.63 ! ! ! Fit before self-cal, rms=0.127912Jy sigma=0.000666 ! Fit after self-cal, rms=0.105459Jy sigma=0.000663 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=4.963 mas, bmaj=5.938 mas, bpa=-84.61 degrees ! Estimated noise=767.631 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 1.64322e-05 Jy ! Component: 100 - total flux cleaned = 7.17852e-05 Jy ! Component: 150 - total flux cleaned = 0.00014171 Jy ! Component: 200 - total flux cleaned = 0.000198567 Jy ! Total flux subtracted in 200 components = 0.000198567 Jy ! Clean residual min=-0.002571 max=0.002852 Jy/beam ! Clean residual mean=0.000026 rms=0.000656 Jy/beam ! Combined flux in latest and established models = 0.0984973 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 27 components and 0.0984973 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.105455Jy sigma=0.000663 ! Fit after self-cal, rms=0.105417Jy sigma=0.000663 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.105417Jy sigma=0.000663 ! Fit after self-cal, rms=0.108875Jy sigma=0.000659 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=4.942 mas, bmaj=5.899 mas, bpa=-83.94 degrees ! Estimated noise=768.435 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000804905 Jy ! Component: 100 - total flux cleaned = 0.00111749 Jy ! Component: 150 - total flux cleaned = 0.00115617 Jy ! Component: 200 - total flux cleaned = 0.00115626 Jy ! Total flux subtracted in 200 components = 0.00115626 Jy ! Clean residual min=-0.001847 max=0.001910 Jy/beam ! Clean residual mean=-0.000011 rms=0.000451 Jy/beam ! Combined flux in latest and established models = 0.0996536 Jy selfcal ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 37 components and 0.0996536 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.108867Jy sigma=0.000659 ! Fit after self-cal, rms=0.109151Jy sigma=0.000658 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (115.5, 6). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00121001 Jy ! Component: 100 - total flux cleaned = 0.00159133 Jy ! Component: 150 - total flux cleaned = 0.00165956 Jy ! Component: 200 - total flux cleaned = 0.00166337 Jy ! Total flux subtracted in 200 components = 0.00166337 Jy ! Clean residual min=-0.001715 max=0.001930 Jy/beam ! Clean residual mean=-0.000009 rms=0.000431 Jy/beam ! Combined flux in latest and established models = 0.101317 Jy ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 58 components and 0.101317 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.109105Jy sigma=0.000658 ! Fit after self-cal, rms=0.109100Jy sigma=0.000658 ! Inverting map ! Added new window around map position (6.5, -19.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00161018 Jy ! Component: 100 - total flux cleaned = 0.00236354 Jy ! Component: 150 - total flux cleaned = 0.00250801 Jy ! Component: 200 - total flux cleaned = 0.00258537 Jy ! Total flux subtracted in 200 components = 0.00258537 Jy ! Clean residual min=-0.001870 max=0.001641 Jy/beam ! Clean residual mean=-0.000008 rms=0.000415 Jy/beam ! Combined flux in latest and established models = 0.103902 Jy ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 72 components and 0.103902 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.109061Jy sigma=0.000658 ! Fit after self-cal, rms=0.109073Jy sigma=0.000658 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.109073Jy sigma=0.000658 ! Fit after self-cal, rms=0.109974Jy sigma=0.000658 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=4.928 mas, bmaj=5.882 mas, bpa=-83.8 degrees ! Estimated noise=768.598 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000830962 Jy ! Component: 100 - total flux cleaned = 0.00107462 Jy ! Component: 150 - total flux cleaned = 0.00114656 Jy ! Component: 200 - total flux cleaned = 0.00121319 Jy ! Total flux subtracted in 200 components = 0.00121319 Jy ! Clean residual min=-0.001735 max=0.001654 Jy/beam ! Clean residual mean=-0.000009 rms=0.000409 Jy/beam ! Combined flux in latest and established models = 0.105116 Jy selfcal ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 82 components and 0.105116 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.109955Jy sigma=0.000658 ! Fit after self-cal, rms=0.109977Jy sigma=0.000658 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000253062 Jy ! Component: 100 - total flux cleaned = 0.000293707 Jy ! Component: 150 - total flux cleaned = 0.00033182 Jy ! Component: 200 - total flux cleaned = 0.000367202 Jy ! Total flux subtracted in 200 components = 0.000367202 Jy ! Clean residual min=-0.001701 max=0.001648 Jy/beam ! Clean residual mean=-0.000010 rms=0.000407 Jy/beam ! Combined flux in latest and established models = 0.105483 Jy ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 89 components and 0.105483 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.109966Jy sigma=0.000658 ! Fit after self-cal, rms=0.109971Jy sigma=0.000658 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.109971Jy sigma=0.000658 ! Fit after self-cal, rms=0.110055Jy sigma=0.000658 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.512 mas, bmaj=9.965 mas, bpa=-88.77 degrees ! Estimated noise=911.055 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 4.54939e-05 Jy ! Component: 100 - total flux cleaned = 0.000159539 Jy ! Component: 150 - total flux cleaned = 0.000288554 Jy ! Component: 200 - total flux cleaned = 0.000417148 Jy ! Total flux subtracted in 200 components = 0.000417148 Jy ! Clean residual min=-0.001680 max=0.001629 Jy/beam ! Clean residual mean=-0.000018 rms=0.000464 Jy/beam ! Combined flux in latest and established models = 0.1059 Jy selfcal ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 105 components and 0.1059 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.110051Jy sigma=0.000658 ! Fit after self-cal, rms=0.110047Jy sigma=0.000658 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000117248 Jy ! Component: 100 - total flux cleaned = 0.000219744 Jy ! Component: 150 - total flux cleaned = 0.000312235 Jy ! Component: 200 - total flux cleaned = 0.000396504 Jy ! Total flux subtracted in 200 components = 0.000396504 Jy ! Clean residual min=-0.001665 max=0.001645 Jy/beam ! Clean residual mean=-0.000018 rms=0.000464 Jy/beam ! Combined flux in latest and established models = 0.106296 Jy ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 111 components and 0.106296 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.110047Jy sigma=0.000658 ! Fit after self-cal, rms=0.110047Jy sigma=0.000658 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=4.923 mas, bmaj=5.879 mas, bpa=-83.78 degrees ! Estimated noise=768.735 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.923 x 5.879 at -83.78 degrees (North through East) ! Clean map min=-0.0016533 max=0.095942 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=4.214 mas, bmaj=4.981 mas, bpa=-85.4 degrees ! Estimated noise=1144.25 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.074531 Jy ! Component: 100 - total flux cleaned = 0.0907836 Jy ! Component: 150 - total flux cleaned = 0.0952042 Jy ! Component: 200 - total flux cleaned = 0.0973124 Jy ! Total flux subtracted in 200 components = 0.0973124 Jy ! Clean residual min=-0.003129 max=0.002984 Jy/beam ! Clean residual mean=-0.000009 rms=0.000742 Jy/beam ! Combined flux in latest and established models = 0.0973124 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 15 model components to the UV plane model. ! The established model now contains 15 components and 0.0973124 Jy ! Inverting map and beam ! Estimated beam: bmin=4.923 mas, bmaj=5.879 mas, bpa=-83.78 degrees ! Estimated noise=768.735 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00300482 Jy ! Component: 100 - total flux cleaned = 0.00435711 Jy ! Component: 150 - total flux cleaned = 0.00516812 Jy ! Component: 200 - total flux cleaned = 0.00589875 Jy ! Total flux subtracted in 200 components = 0.00589875 Jy ! Clean residual min=-0.001760 max=0.001592 Jy/beam ! Clean residual mean=-0.000011 rms=0.000429 Jy/beam ! Combined flux in latest and established models = 0.103211 Jy ! Adding 30 model components to the UV plane model. ! The established model now contains 44 components and 0.103211 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.512 mas, bmaj=9.965 mas, bpa=-88.77 degrees ! Estimated noise=911.055 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000749354 Jy ! Component: 100 - total flux cleaned = 0.00132598 Jy ! Component: 150 - total flux cleaned = 0.00184127 Jy ! Component: 200 - total flux cleaned = 0.00224965 Jy ! Total flux subtracted in 200 components = 0.00224965 Jy ! Clean residual min=-0.001795 max=0.001696 Jy/beam ! Clean residual mean=-0.000019 rms=0.000475 Jy/beam ! Combined flux in latest and established models = 0.105461 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000167229 Jy ! Component: 100 - total flux cleaned = 0.000337692 Jy ! Component: 150 - total flux cleaned = 0.000472211 Jy ! Component: 200 - total flux cleaned = 0.000594178 Jy ! Total flux subtracted in 200 components = 0.000594178 Jy ! Clean residual min=-0.001694 max=0.001693 Jy/beam ! Clean residual mean=-0.000018 rms=0.000469 Jy/beam ! Combined flux in latest and established models = 0.106055 Jy ! Adding 57 model components to the UV plane model. ! The established model now contains 99 components and 0.106055 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=4.923 mas, bmaj=5.879 mas, bpa=-83.78 degrees ! Estimated noise=768.735 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 6.58678e-05 Jy ! Component: 100 - total flux cleaned = 0.000143433 Jy ! Component: 150 - total flux cleaned = 0.000212166 Jy ! Component: 200 - total flux cleaned = 0.00027416 Jy ! Total flux subtracted in 200 components = 0.00027416 Jy ! Clean residual min=-0.001674 max=0.001680 Jy/beam ! Clean residual mean=-0.000010 rms=0.000409 Jy/beam ! Combined flux in latest and established models = 0.106329 Jy selfcal ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 114 components and 0.106329 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.110047Jy sigma=0.000658 ! Fit after self-cal, rms=0.110053Jy sigma=0.000658 wmodel J0806+7746_S_2017_01_16_pus_map.mod ! Writing 114 model components to file: J0806+7746_S_2017_01_16_pus_map.mod wobs J0806+7746_S_2017_01_16_pus_uvs.fits ! Writing UV FITS file: J0806+7746_S_2017_01_16_pus_uvs.fits wwins J0806+7746_S_2017_01_16_pus_map.win ! wwins: Wrote 3 windows to J0806+7746_S_2017_01_16_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 4.10461e-06 Jy ! Component: 100 - total flux cleaned = -0.000252912 Jy ! Component: 150 - total flux cleaned = -0.000497058 Jy ! Component: 200 - total flux cleaned = -0.000626977 Jy ! Component: 250 - total flux cleaned = -0.000702081 Jy ! Component: 300 - total flux cleaned = -0.000823303 Jy ! Component: 350 - total flux cleaned = -0.000894282 Jy ! Component: 400 - total flux cleaned = -0.00105543 Jy ! Component: 450 - total flux cleaned = -0.0011686 Jy ! Component: 500 - total flux cleaned = -0.00127976 Jy ! Component: 550 - total flux cleaned = -0.00143221 Jy ! Component: 600 - total flux cleaned = -0.00156042 Jy ! Component: 650 - total flux cleaned = -0.00164474 Jy ! Component: 700 - total flux cleaned = -0.00181078 Jy ! Component: 750 - total flux cleaned = -0.00191311 Jy ! Component: 800 - total flux cleaned = -0.002094 Jy ! Component: 850 - total flux cleaned = -0.00225223 Jy ! Component: 900 - total flux cleaned = -0.00234975 Jy ! Component: 950 - total flux cleaned = -0.00240768 Jy ! Component: 1000 - total flux cleaned = -0.00250284 Jy ! Component: 1050 - total flux cleaned = -0.00261546 Jy ! Component: 1100 - total flux cleaned = -0.00270783 Jy ! Component: 1150 - total flux cleaned = -0.0027626 Jy ! Component: 1200 - total flux cleaned = -0.00285345 Jy ! Component: 1250 - total flux cleaned = -0.00290747 Jy ! Component: 1300 - total flux cleaned = -0.00297872 Jy ! Component: 1350 - total flux cleaned = -0.00304894 Jy ! Component: 1400 - total flux cleaned = -0.00310109 Jy ! Component: 1450 - total flux cleaned = -0.00320425 Jy ! Component: 1500 - total flux cleaned = -0.00327252 Jy ! Component: 1550 - total flux cleaned = -0.00335669 Jy ! Component: 1600 - total flux cleaned = -0.00340672 Jy ! Component: 1650 - total flux cleaned = -0.00352237 Jy ! Component: 1700 - total flux cleaned = -0.00358764 Jy ! Component: 1750 - total flux cleaned = -0.00366857 Jy ! Component: 1800 - total flux cleaned = -0.00376452 Jy ! Component: 1850 - total flux cleaned = -0.00385929 Jy ! Component: 1900 - total flux cleaned = -0.00392197 Jy ! Component: 1950 - total flux cleaned = -0.00396866 Jy ! Component: 2000 - total flux cleaned = -0.0040921 Jy ! Component: 2050 - total flux cleaned = -0.00413792 Jy ! Component: 2100 - total flux cleaned = -0.00427411 Jy ! Component: 2150 - total flux cleaned = -0.00434902 Jy ! Component: 2200 - total flux cleaned = -0.00443804 Jy ! Component: 2250 - total flux cleaned = -0.00455582 Jy ! Component: 2300 - total flux cleaned = -0.00461436 Jy ! Component: 2350 - total flux cleaned = -0.00473045 Jy ! Component: 2400 - total flux cleaned = -0.00480225 Jy ! Component: 2450 - total flux cleaned = -0.00487363 Jy ! Component: 2500 - total flux cleaned = -0.00500087 Jy ! Component: 2550 - total flux cleaned = -0.00507076 Jy ! Component: 2600 - total flux cleaned = -0.00512647 Jy ! Component: 2650 - total flux cleaned = -0.00516789 Jy ! Component: 2700 - total flux cleaned = -0.00523642 Jy ! Component: 2750 - total flux cleaned = -0.00530432 Jy ! Component: 2800 - total flux cleaned = -0.00534473 Jy ! Component: 2850 - total flux cleaned = -0.00543843 Jy ! Component: 2900 - total flux cleaned = -0.00546512 Jy ! Component: 2950 - total flux cleaned = -0.00551802 Jy ! Component: 3000 - total flux cleaned = -0.00559671 Jy ! Component: 3050 - total flux cleaned = -0.00566167 Jy ! Component: 3100 - total flux cleaned = -0.00570034 Jy ! Component: 3150 - total flux cleaned = -0.00573889 Jy ! Component: 3200 - total flux cleaned = -0.00581541 Jy ! Component: 3250 - total flux cleaned = -0.00582814 Jy ! Component: 3300 - total flux cleaned = -0.00589114 Jy ! Component: 3350 - total flux cleaned = -0.00592872 Jy ! Component: 3400 - total flux cleaned = -0.00595364 Jy ! Component: 3450 - total flux cleaned = -0.00605238 Jy ! Component: 3500 - total flux cleaned = -0.00608918 Jy ! Component: 3550 - total flux cleaned = -0.00617467 Jy ! Component: 3600 - total flux cleaned = -0.00619888 Jy ! Component: 3650 - total flux cleaned = -0.00624712 Jy ! Component: 3700 - total flux cleaned = -0.00633108 Jy ! Component: 3750 - total flux cleaned = -0.00634297 Jy ! Component: 3800 - total flux cleaned = -0.00639042 Jy ! Component: 3850 - total flux cleaned = -0.00641404 Jy ! Component: 3900 - total flux cleaned = -0.00647267 Jy ! Component: 3950 - total flux cleaned = -0.00653083 Jy ! Component: 4000 - total flux cleaned = -0.00653077 Jy ! Component: 4050 - total flux cleaned = -0.00655384 Jy ! Total flux subtracted in 4096 components = -0.00658825 Jy ! Clean residual min=-0.000739 max=0.000693 Jy/beam ! Clean residual mean=-0.000006 rms=0.000212 Jy/beam ! Combined flux in latest and established models = 0.0997409 Jy keep ! Adding 273 model components to the UV plane model. ! The established model now contains 387 components and 0.0997409 Jy ![Exited script file: muppet] wmap "J0806+7746_S_2017_01_16_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.923 x 5.879 at -83.78 degrees (North through East) ! Clean map min=-0.0014349 max=0.095815 Jy/beam ! Writing clean map to FITS file: J0806+7746_S_2017_01_16_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.095815 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000210344 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.658595 0.658595 1.31719 2.63438 5.26876 10.5375 21.075 42.1501 84.3002 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0006 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.095 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.923 x 5.879 at -83.78 degrees (North through East) ! Clean map min=-0.0014349 max=0.095815 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J0806+7746_S_2017_01_16_pus_uvs.log closed on Sun Apr 7 15:09:06 2019