! Started logfile: J0806+5931_S_2017_10_21_pus_uvs.log on Sat May 11 20:53:38 2019 obs J0806+5931_S_2017_10_21_pus_uva.fits ! Reading UV FITS file: J0806+5931_S_2017_10_21_pus_uva.fits ! AN table 1: 235 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.935697 visibilities/baseline/integration-bin. ! Found source: J0806+5931 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 644 lines of history. ! ! Reading 31664 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J0806+5931_S_2017_10_21_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 70 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 335 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 187 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 1312 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.977401Jy sigma=0.010393 ! Fit after self-cal, rms=0.956455Jy sigma=0.010186 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.07 mas, bmaj=4.439 mas, bpa=-39.76 degrees ! Estimated noise=770.603 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0329072 Jy ! Component: 100 - total flux cleaned = 0.0416093 Jy ! Total flux subtracted in 100 components = 0.0416093 Jy ! Clean residual min=-0.003092 max=0.003831 Jy/beam ! Clean residual mean=-0.000023 rms=0.000742 Jy/beam ! Combined flux in latest and established models = 0.0416093 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 9 components and 0.0416093 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.070855Jy sigma=0.000711 ! Fit after self-cal, rms=0.070427Jy sigma=0.000706 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=4.147 mas, bmaj=5.876 mas, bpa=-37.62 degrees ! Estimated noise=451.517 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00683582 Jy ! Component: 100 - total flux cleaned = 0.0104673 Jy ! Component: 150 - total flux cleaned = 0.0125113 Jy ! Component: 200 - total flux cleaned = 0.0136683 Jy ! Total flux subtracted in 200 components = 0.0136683 Jy ! Clean residual min=-0.003425 max=0.002233 Jy/beam ! Clean residual mean=-0.000023 rms=0.000624 Jy/beam ! Combined flux in latest and established models = 0.0552776 Jy ! Performing phase self-cal ! Adding 29 model components to the UV plane model. ! The established model now contains 37 components and 0.0552776 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.069742Jy sigma=0.000700 ! Fit after self-cal, rms=0.069682Jy sigma=0.000699 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.09 FD 0.99 HN 1.03 KP 1.09 ! LA 1.09 MK 1.09 NL 0.98 OV 1.07 ! PT 0.87 ! ! ! Correcting IF 2. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.13 FD 1.01 HN 1.07 KP 1.08 ! LA 1.03 MK 1.02 NL 0.93 OV 1.10 ! PT 0.80 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.94 FD 1.05 HN 1.14 KP 1.10 ! LA 0.82 MK 1.09 NL 1.11 OV 0.96 ! PT 0.83 ! ! ! Correcting IF 4. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.02 HN 0.85 KP 1.00* ! LA 0.84 MK 0.78 NL 1.00* OV 1.00* ! PT 0.70 ! ! ! Fit before self-cal, rms=0.069682Jy sigma=0.000699 ! Fit after self-cal, rms=0.069072Jy sigma=0.000694 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=4.23 mas, bmaj=5.913 mas, bpa=-36.74 degrees ! Estimated noise=452.078 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000286144 Jy ! Component: 100 - total flux cleaned = 0.000366621 Jy ! Component: 150 - total flux cleaned = 0.00038768 Jy ! Component: 200 - total flux cleaned = 0.000405033 Jy ! Total flux subtracted in 200 components = 0.000405033 Jy ! Clean residual min=-0.001443 max=0.001542 Jy/beam ! Clean residual mean=-0.000010 rms=0.000365 Jy/beam ! Combined flux in latest and established models = 0.0556826 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 46 components and 0.0556826 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.069065Jy sigma=0.000694 ! Fit after self-cal, rms=0.069322Jy sigma=0.000693 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.069322Jy sigma=0.000693 ! Fit after self-cal, rms=0.069908Jy sigma=0.000692 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=4.265 mas, bmaj=5.878 mas, bpa=-36.83 degrees ! Estimated noise=454.221 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000309398 Jy ! Component: 100 - total flux cleaned = 0.00033725 Jy ! Component: 150 - total flux cleaned = 0.000348259 Jy ! Component: 200 - total flux cleaned = 0.00035829 Jy ! Total flux subtracted in 200 components = 0.00035829 Jy ! Clean residual min=-0.001332 max=0.001503 Jy/beam ! Clean residual mean=-0.000001 rms=0.000357 Jy/beam ! Combined flux in latest and established models = 0.0560409 Jy selfcal ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 50 components and 0.0560409 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.069900Jy sigma=0.000692 ! Fit after self-cal, rms=0.070080Jy sigma=0.000691 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -6.46832e-05 Jy ! Component: 100 - total flux cleaned = -4.25685e-05 Jy ! Component: 150 - total flux cleaned = -2.3888e-05 Jy ! Component: 200 - total flux cleaned = -8.04422e-06 Jy ! Total flux subtracted in 200 components = -8.04422e-06 Jy ! Clean residual min=-0.001426 max=0.001463 Jy/beam ! Clean residual mean=-0.000001 rms=0.000361 Jy/beam ! Combined flux in latest and established models = 0.0560329 Jy ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 51 components and 0.0560329 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.070075Jy sigma=0.000691 ! Fit after self-cal, rms=0.070081Jy sigma=0.000691 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.070081Jy sigma=0.000691 ! Fit after self-cal, rms=0.070475Jy sigma=0.000691 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=4.28 mas, bmaj=5.816 mas, bpa=-36.49 degrees ! Estimated noise=453.58 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000252075 Jy ! Component: 100 - total flux cleaned = 0.000265418 Jy ! Component: 150 - total flux cleaned = 0.000286794 Jy ! Component: 200 - total flux cleaned = 0.000304057 Jy ! Total flux subtracted in 200 components = 0.000304057 Jy ! Clean residual min=-0.001372 max=0.001491 Jy/beam ! Clean residual mean=-0.000001 rms=0.000362 Jy/beam ! Combined flux in latest and established models = 0.0563369 Jy selfcal ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 51 components and 0.0563369 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.070469Jy sigma=0.000691 ! Fit after self-cal, rms=0.070570Jy sigma=0.000691 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -6.51651e-05 Jy ! Component: 100 - total flux cleaned = -5.67555e-05 Jy ! Component: 150 - total flux cleaned = -4.21463e-05 Jy ! Component: 200 - total flux cleaned = -2.90024e-05 Jy ! Total flux subtracted in 200 components = -2.90024e-05 Jy ! Clean residual min=-0.001376 max=0.001460 Jy/beam ! Clean residual mean=-0.000000 rms=0.000360 Jy/beam ! Combined flux in latest and established models = 0.0563079 Jy ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 51 components and 0.0563079 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.070566Jy sigma=0.000691 ! Fit after self-cal, rms=0.070569Jy sigma=0.000691 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.070569Jy sigma=0.000691 ! Fit after self-cal, rms=0.070841Jy sigma=0.000691 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=9.425 mas, bmaj=9.67 mas, bpa=78.34 degrees ! Estimated noise=540.187 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000231425 Jy ! Component: 100 - total flux cleaned = 0.00025866 Jy ! Component: 150 - total flux cleaned = 0.000280827 Jy ! Component: 200 - total flux cleaned = 0.000299033 Jy ! Total flux subtracted in 200 components = 0.000299033 Jy ! Clean residual min=-0.001408 max=0.001676 Jy/beam ! Clean residual mean=-0.000001 rms=0.000440 Jy/beam ! Combined flux in latest and established models = 0.056607 Jy selfcal ! Performing phase self-cal ! Adding 5 model components to the UV plane model. ! The established model now contains 53 components and 0.056607 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.070838Jy sigma=0.000691 ! Fit after self-cal, rms=0.070901Jy sigma=0.000691 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -2.87769e-05 Jy ! Component: 100 - total flux cleaned = -1.38955e-05 Jy ! Component: 150 - total flux cleaned = -2.70275e-06 Jy ! Component: 200 - total flux cleaned = 1.97622e-06 Jy ! Total flux subtracted in 200 components = 1.97622e-06 Jy ! Clean residual min=-0.001416 max=0.001637 Jy/beam ! Clean residual mean=0.000000 rms=0.000434 Jy/beam ! Combined flux in latest and established models = 0.0566089 Jy ! Performing phase self-cal ! Adding 4 model components to the UV plane model. ! The established model now contains 53 components and 0.0566089 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.070900Jy sigma=0.000691 ! Fit after self-cal, rms=0.070901Jy sigma=0.000691 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=4.293 mas, bmaj=5.756 mas, bpa=-35.93 degrees ! Estimated noise=452.572 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.293 x 5.756 at -35.93 degrees (North through East) ! Clean map min=-0.0013444 max=0.043938 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.148 mas, bmaj=4.257 mas, bpa=-37.29 degrees ! Estimated noise=764.286 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0316519 Jy ! Component: 100 - total flux cleaned = 0.0416038 Jy ! Component: 150 - total flux cleaned = 0.0467394 Jy ! Component: 200 - total flux cleaned = 0.0498158 Jy ! Total flux subtracted in 200 components = 0.0498158 Jy ! Clean residual min=-0.002329 max=0.002175 Jy/beam ! Clean residual mean=-0.000008 rms=0.000531 Jy/beam ! Combined flux in latest and established models = 0.0498158 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 23 model components to the UV plane model. ! The established model now contains 23 components and 0.0498158 Jy ! Inverting map and beam ! Estimated beam: bmin=4.293 mas, bmaj=5.756 mas, bpa=-35.93 degrees ! Estimated noise=452.572 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00349392 Jy ! Component: 100 - total flux cleaned = 0.00518366 Jy ! Component: 150 - total flux cleaned = 0.00608984 Jy ! Component: 200 - total flux cleaned = 0.00632191 Jy ! Total flux subtracted in 200 components = 0.00632191 Jy ! Clean residual min=-0.001386 max=0.001536 Jy/beam ! Clean residual mean=-0.000001 rms=0.000369 Jy/beam ! Combined flux in latest and established models = 0.0561377 Jy ! Adding 22 model components to the UV plane model. ! The established model now contains 41 components and 0.0561378 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=9.425 mas, bmaj=9.67 mas, bpa=78.34 degrees ! Estimated noise=540.187 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000318396 Jy ! Component: 100 - total flux cleaned = 0.000365867 Jy ! Component: 150 - total flux cleaned = 0.000404286 Jy ! Component: 200 - total flux cleaned = 0.000436055 Jy ! Total flux subtracted in 200 components = 0.000436055 Jy ! Clean residual min=-0.001411 max=0.001619 Jy/beam ! Clean residual mean=0.000000 rms=0.000435 Jy/beam ! Combined flux in latest and established models = 0.0565738 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 3.31526e-05 Jy ! Component: 100 - total flux cleaned = 4.66157e-05 Jy ! Component: 150 - total flux cleaned = 6.39365e-05 Jy ! Component: 200 - total flux cleaned = 7.36972e-05 Jy ! Total flux subtracted in 200 components = 7.36972e-05 Jy ! Clean residual min=-0.001401 max=0.001633 Jy/beam ! Clean residual mean=0.000001 rms=0.000433 Jy/beam ! Combined flux in latest and established models = 0.0566475 Jy ! Adding 15 model components to the UV plane model. ! The established model now contains 50 components and 0.0566475 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=4.293 mas, bmaj=5.756 mas, bpa=-35.93 degrees ! Estimated noise=452.572 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 7.79665e-05 Jy ! Component: 100 - total flux cleaned = 6.84197e-05 Jy ! Component: 150 - total flux cleaned = 4.33339e-05 Jy ! Component: 200 - total flux cleaned = 4.33181e-05 Jy ! Total flux subtracted in 200 components = 4.33181e-05 Jy ! Clean residual min=-0.001332 max=0.001519 Jy/beam ! Clean residual mean=0.000000 rms=0.000362 Jy/beam ! Combined flux in latest and established models = 0.0566908 Jy selfcal ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 57 components and 0.0566908 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.070902Jy sigma=0.000691 ! Fit after self-cal, rms=0.070901Jy sigma=0.000691 wmodel J0806+5931_S_2017_10_21_pus_map.mod ! Writing 57 model components to file: J0806+5931_S_2017_10_21_pus_map.mod wobs J0806+5931_S_2017_10_21_pus_uvs.fits ! Writing UV FITS file: J0806+5931_S_2017_10_21_pus_uvs.fits wwins J0806+5931_S_2017_10_21_pus_map.win ! wwins: Wrote 1 windows to J0806+5931_S_2017_10_21_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.000307887 Jy ! Component: 100 - total flux cleaned = 0.000355747 Jy ! Component: 150 - total flux cleaned = 0.00037826 Jy ! Component: 200 - total flux cleaned = 0.00031602 Jy ! Component: 250 - total flux cleaned = 0.000235904 Jy ! Component: 300 - total flux cleaned = 0.000139507 Jy ! Component: 350 - total flux cleaned = 0.000120476 Jy ! Component: 400 - total flux cleaned = 1.13853e-05 Jy ! Component: 450 - total flux cleaned = -9.45368e-05 Jy ! Component: 500 - total flux cleaned = -0.000146286 Jy ! Component: 550 - total flux cleaned = -0.000262957 Jy ! Component: 600 - total flux cleaned = -0.000311471 Jy ! Component: 650 - total flux cleaned = -0.000311249 Jy ! Component: 700 - total flux cleaned = -0.000327012 Jy ! Component: 750 - total flux cleaned = -0.000357572 Jy ! Component: 800 - total flux cleaned = -0.000342804 Jy ! Component: 850 - total flux cleaned = -0.0003866 Jy ! Component: 900 - total flux cleaned = -0.000372126 Jy ! Component: 950 - total flux cleaned = -0.000386096 Jy ! Component: 1000 - total flux cleaned = -0.000372084 Jy ! Component: 1050 - total flux cleaned = -0.000331491 Jy ! Component: 1100 - total flux cleaned = -0.000344696 Jy ! Component: 1150 - total flux cleaned = -0.000318603 Jy ! Component: 1200 - total flux cleaned = -0.000292839 Jy ! Component: 1250 - total flux cleaned = -0.000292725 Jy ! Component: 1300 - total flux cleaned = -0.000292535 Jy ! Component: 1350 - total flux cleaned = -0.000243504 Jy ! Component: 1400 - total flux cleaned = -0.000291812 Jy ! Component: 1450 - total flux cleaned = -0.000267931 Jy ! Component: 1500 - total flux cleaned = -0.000303041 Jy ! Component: 1550 - total flux cleaned = -0.00031446 Jy ! Component: 1600 - total flux cleaned = -0.000314439 Jy ! Component: 1650 - total flux cleaned = -0.000314353 Jy ! Component: 1700 - total flux cleaned = -0.00032541 Jy ! Component: 1750 - total flux cleaned = -0.000314173 Jy ! Component: 1800 - total flux cleaned = -0.000292381 Jy ! Component: 1850 - total flux cleaned = -0.000302978 Jy ! Component: 1900 - total flux cleaned = -0.000324113 Jy ! Component: 1950 - total flux cleaned = -0.000323876 Jy ! Component: 2000 - total flux cleaned = -0.000323664 Jy ! Component: 2050 - total flux cleaned = -0.000333927 Jy ! Component: 2100 - total flux cleaned = -0.000344082 Jy ! Component: 2150 - total flux cleaned = -0.000384118 Jy ! Component: 2200 - total flux cleaned = -0.000433585 Jy ! Component: 2250 - total flux cleaned = -0.000443197 Jy ! Component: 2300 - total flux cleaned = -0.000481873 Jy ! Component: 2350 - total flux cleaned = -0.000519931 Jy ! Component: 2400 - total flux cleaned = -0.000519936 Jy ! Component: 2450 - total flux cleaned = -0.000557346 Jy ! Component: 2500 - total flux cleaned = -0.000603649 Jy ! Component: 2550 - total flux cleaned = -0.000622072 Jy ! Component: 2600 - total flux cleaned = -0.000658365 Jy ! Component: 2650 - total flux cleaned = -0.000694227 Jy ! Component: 2700 - total flux cleaned = -0.000694161 Jy ! Component: 2750 - total flux cleaned = -0.000720613 Jy ! Component: 2800 - total flux cleaned = -0.000729323 Jy ! Component: 2850 - total flux cleaned = -0.00072927 Jy ! Component: 2900 - total flux cleaned = -0.000763621 Jy ! Component: 2950 - total flux cleaned = -0.000772104 Jy ! Component: 3000 - total flux cleaned = -0.000788878 Jy ! Component: 3050 - total flux cleaned = -0.00079715 Jy ! Component: 3100 - total flux cleaned = -0.000838362 Jy ! Component: 3150 - total flux cleaned = -0.000854549 Jy ! Component: 3200 - total flux cleaned = -0.000854522 Jy ! Component: 3250 - total flux cleaned = -0.000870546 Jy ! Component: 3300 - total flux cleaned = -0.000878531 Jy ! Component: 3350 - total flux cleaned = -0.000870644 Jy ! Component: 3400 - total flux cleaned = -0.0008942 Jy ! Component: 3450 - total flux cleaned = -0.000909763 Jy ! Component: 3500 - total flux cleaned = -0.000917569 Jy ! Component: 3550 - total flux cleaned = -0.00093285 Jy ! Component: 3600 - total flux cleaned = -0.000940383 Jy ! Component: 3650 - total flux cleaned = -0.000902651 Jy ! Component: 3700 - total flux cleaned = -0.000887761 Jy ! Component: 3750 - total flux cleaned = -0.000895231 Jy ! Component: 3800 - total flux cleaned = -0.000895298 Jy ! Component: 3850 - total flux cleaned = -0.000887978 Jy ! Component: 3900 - total flux cleaned = -0.000909812 Jy ! Component: 3950 - total flux cleaned = -0.000888203 Jy ! Component: 4000 - total flux cleaned = -0.000881056 Jy ! Component: 4050 - total flux cleaned = -0.000895314 Jy ! Total flux subtracted in 4096 components = -0.000873992 Jy ! Clean residual min=-0.000427 max=0.000500 Jy/beam ! Clean residual mean=-0.000000 rms=0.000128 Jy/beam ! Combined flux in latest and established models = 0.0558168 Jy keep ! Adding 265 model components to the UV plane model. ! The established model now contains 322 components and 0.0558168 Jy ![Exited script file: muppet] wmap "J0806+5931_S_2017_10_21_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.293 x 5.756 at -35.93 degrees (North through East) ! Clean map min=-0.00084926 max=0.043743 Jy/beam ! Writing clean map to FITS file: J0806+5931_S_2017_10_21_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.0437433 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000125924 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.863612 0.863612 1.72722 3.45445 6.9089 13.8178 27.6356 55.2712 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0003 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.043 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.293 x 5.756 at -35.93 degrees (North through East) ! Clean map min=-0.00084926 max=0.043743 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J0806+5931_S_2017_10_21_pus_uvs.log closed on Sat May 11 20:53:43 2019