! Started logfile: J0806+5931_S_2017_09_26_pus_uvs.log on Sat May 11 12:58:38 2019 obs J0806+5931_S_2017_09_26_pus_uva.fits ! Reading UV FITS file: J0806+5931_S_2017_09_26_pus_uva.fits ! AN table 1: 294 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.77003 visibilities/baseline/integration-bin. ! Found source: J0806+5931 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 674 lines of history. ! ! Reading 32600 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J0806+5931_S_2017_09_26_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 379 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 308 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 379 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 1921 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.977063Jy sigma=0.008693 ! Fit after self-cal, rms=0.953982Jy sigma=0.008500 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.057 mas, bmaj=5.754 mas, bpa=-71.17 degrees ! Estimated noise=1195.44 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0359901 Jy ! Component: 100 - total flux cleaned = 0.044758 Jy ! Total flux subtracted in 100 components = 0.044758 Jy ! Clean residual min=-0.003321 max=0.003751 Jy/beam ! Clean residual mean=-0.000001 rms=0.000914 Jy/beam ! Combined flux in latest and established models = 0.044758 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 9 components and 0.044758 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.075745Jy sigma=0.000643 ! Fit after self-cal, rms=0.075246Jy sigma=0.000639 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=4.039 mas, bmaj=6.881 mas, bpa=-73.51 degrees ! Estimated noise=511.283 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00664119 Jy ! Component: 100 - total flux cleaned = 0.0102136 Jy ! Component: 150 - total flux cleaned = 0.0123326 Jy ! Component: 200 - total flux cleaned = 0.0136396 Jy ! Total flux subtracted in 200 components = 0.0136396 Jy ! Clean residual min=-0.001865 max=0.002000 Jy/beam ! Clean residual mean=0.000004 rms=0.000486 Jy/beam ! Combined flux in latest and established models = 0.0583976 Jy ! Performing phase self-cal ! Adding 45 model components to the UV plane model. ! The established model now contains 49 components and 0.0583976 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.074648Jy sigma=0.000633 ! Fit after self-cal, rms=0.074579Jy sigma=0.000633 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 1.00* HN 1.07 KP 0.95 ! LA 1.02 MK 1.06 NL 0.96 OV 1.05 ! PT 1.00 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.03 FD 1.00* HN 1.16 KP 1.00 ! LA 0.93 MK 1.00 NL 1.08 OV 1.05 ! PT 0.93 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.89 FD 1.00* HN 1.09 KP 0.93 ! LA 0.95 MK 1.08 NL 1.08 OV 0.99 ! PT 0.97 ! ! ! Correcting IF 4. ! A total of 75 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 0.95 KP 1.00* ! LA 0.89 MK 0.83 NL 1.00* OV 0.73 ! PT 0.91 ! ! ! Fit before self-cal, rms=0.074579Jy sigma=0.000633 ! Fit after self-cal, rms=0.074395Jy sigma=0.000631 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=4.153 mas, bmaj=6.959 mas, bpa=-73.89 degrees ! Estimated noise=513.665 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000857711 Jy ! Component: 100 - total flux cleaned = 0.00101299 Jy ! Component: 150 - total flux cleaned = 0.00109229 Jy ! Component: 200 - total flux cleaned = 0.00114836 Jy ! Total flux subtracted in 200 components = 0.00114836 Jy ! Clean residual min=-0.001583 max=0.001592 Jy/beam ! Clean residual mean=0.000021 rms=0.000398 Jy/beam ! Combined flux in latest and established models = 0.0595459 Jy ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 57 components and 0.0595459 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.074384Jy sigma=0.000631 ! Fit after self-cal, rms=0.074389Jy sigma=0.000631 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.074389Jy sigma=0.000631 ! Fit after self-cal, rms=0.074185Jy sigma=0.000631 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=4.168 mas, bmaj=6.996 mas, bpa=-74.8 degrees ! Estimated noise=514.654 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000729574 Jy ! Component: 100 - total flux cleaned = 0.000729397 Jy ! Component: 150 - total flux cleaned = 0.000746753 Jy ! Component: 200 - total flux cleaned = 0.000747063 Jy ! Total flux subtracted in 200 components = 0.000747063 Jy ! Clean residual min=-0.001531 max=0.001576 Jy/beam ! Clean residual mean=0.000021 rms=0.000364 Jy/beam ! Combined flux in latest and established models = 0.060293 Jy selfcal ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 62 components and 0.060293 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.074172Jy sigma=0.000631 ! Fit after self-cal, rms=0.074171Jy sigma=0.000630 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-90.5, -2.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00133303 Jy ! Component: 100 - total flux cleaned = 0.00196381 Jy ! Component: 150 - total flux cleaned = 0.00214284 Jy ! Component: 200 - total flux cleaned = 0.00227389 Jy ! Total flux subtracted in 200 components = 0.00227389 Jy ! Clean residual min=-0.001327 max=0.001277 Jy/beam ! Clean residual mean=0.000009 rms=0.000330 Jy/beam ! Combined flux in latest and established models = 0.0625669 Jy ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 81 components and 0.0625669 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.074144Jy sigma=0.000630 ! Fit after self-cal, rms=0.074136Jy sigma=0.000630 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.074136Jy sigma=0.000630 ! Fit after self-cal, rms=0.074044Jy sigma=0.000630 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=4.174 mas, bmaj=6.986 mas, bpa=-75.52 degrees ! Estimated noise=513.786 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00086891 Jy ! Component: 100 - total flux cleaned = 0.00131925 Jy ! Component: 150 - total flux cleaned = 0.00143171 Jy ! Component: 200 - total flux cleaned = 0.00151613 Jy ! Total flux subtracted in 200 components = 0.00151613 Jy ! Clean residual min=-0.001232 max=0.001208 Jy/beam ! Clean residual mean=0.000010 rms=0.000322 Jy/beam ! Combined flux in latest and established models = 0.064083 Jy selfcal ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 85 components and 0.064083 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.074031Jy sigma=0.000630 ! Fit after self-cal, rms=0.074023Jy sigma=0.000630 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00046934 Jy ! Component: 100 - total flux cleaned = 0.000470475 Jy ! Component: 150 - total flux cleaned = 0.000471056 Jy ! Component: 200 - total flux cleaned = 0.000501762 Jy ! Total flux subtracted in 200 components = 0.000501762 Jy ! Clean residual min=-0.001237 max=0.001217 Jy/beam ! Clean residual mean=0.000009 rms=0.000320 Jy/beam ! Combined flux in latest and established models = 0.0645848 Jy ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 87 components and 0.0645848 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.074014Jy sigma=0.000630 ! Fit after self-cal, rms=0.074012Jy sigma=0.000630 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.074012Jy sigma=0.000630 ! Fit after self-cal, rms=0.074126Jy sigma=0.000630 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.626 mas, bmaj=11.13 mas, bpa=79.52 degrees ! Estimated noise=597.512 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000585285 Jy ! Component: 100 - total flux cleaned = 0.000779254 Jy ! Component: 150 - total flux cleaned = 0.000871046 Jy ! Component: 200 - total flux cleaned = 0.00093899 Jy ! Total flux subtracted in 200 components = 0.00093899 Jy ! Clean residual min=-0.001322 max=0.001262 Jy/beam ! Clean residual mean=0.000020 rms=0.000385 Jy/beam ! Combined flux in latest and established models = 0.0655237 Jy selfcal ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 94 components and 0.0655238 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.074124Jy sigma=0.000630 ! Fit after self-cal, rms=0.074125Jy sigma=0.000630 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0002737 Jy ! Component: 100 - total flux cleaned = 0.000345755 Jy ! Component: 150 - total flux cleaned = 0.000376653 Jy ! Component: 200 - total flux cleaned = 0.00040525 Jy ! Total flux subtracted in 200 components = 0.00040525 Jy ! Clean residual min=-0.001289 max=0.001312 Jy/beam ! Clean residual mean=0.000019 rms=0.000382 Jy/beam ! Combined flux in latest and established models = 0.065929 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 96 components and 0.065929 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.074123Jy sigma=0.000630 ! Fit after self-cal, rms=0.074122Jy sigma=0.000630 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=4.177 mas, bmaj=6.976 mas, bpa=-75.91 degrees ! Estimated noise=514.254 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.177 x 6.976 at -75.91 degrees (North through East) ! Clean map min=-0.0011494 max=0.047809 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.211 mas, bmaj=5.718 mas, bpa=-74.75 degrees ! Estimated noise=1200.55 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0357646 Jy ! Component: 100 - total flux cleaned = 0.0464159 Jy ! Component: 150 - total flux cleaned = 0.051755 Jy ! Component: 200 - total flux cleaned = 0.054803 Jy ! Total flux subtracted in 200 components = 0.054803 Jy ! Clean residual min=-0.002962 max=0.002999 Jy/beam ! Clean residual mean=0.000006 rms=0.000716 Jy/beam ! Combined flux in latest and established models = 0.054803 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 14 model components to the UV plane model. ! The established model now contains 14 components and 0.054803 Jy ! Inverting map and beam ! Estimated beam: bmin=4.177 mas, bmaj=6.976 mas, bpa=-75.91 degrees ! Estimated noise=514.254 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (3.5, -3.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00347135 Jy ! Component: 100 - total flux cleaned = 0.00557198 Jy ! Component: 150 - total flux cleaned = 0.00708714 Jy ! Component: 200 - total flux cleaned = 0.0082816 Jy ! Total flux subtracted in 200 components = 0.0082816 Jy ! Clean residual min=-0.001474 max=0.001306 Jy/beam ! Clean residual mean=0.000009 rms=0.000356 Jy/beam ! Combined flux in latest and established models = 0.0630846 Jy ! Adding 27 model components to the UV plane model. ! The established model now contains 40 components and 0.0630846 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.626 mas, bmaj=11.13 mas, bpa=79.52 degrees ! Estimated noise=597.512 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00121721 Jy ! Component: 100 - total flux cleaned = 0.00203335 Jy ! Component: 150 - total flux cleaned = 0.00243774 Jy ! Component: 200 - total flux cleaned = 0.00272972 Jy ! Total flux subtracted in 200 components = 0.00272972 Jy ! Clean residual min=-0.001418 max=0.001310 Jy/beam ! Clean residual mean=0.000016 rms=0.000394 Jy/beam ! Combined flux in latest and established models = 0.0658143 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000262608 Jy ! Component: 100 - total flux cleaned = 0.000368484 Jy ! Component: 150 - total flux cleaned = 0.000450284 Jy ! Component: 200 - total flux cleaned = 0.00049941 Jy ! Total flux subtracted in 200 components = 0.00049941 Jy ! Clean residual min=-0.001342 max=0.001304 Jy/beam ! Clean residual mean=0.000017 rms=0.000382 Jy/beam ! Combined flux in latest and established models = 0.0663138 Jy ! Adding 50 model components to the UV plane model. ! The established model now contains 82 components and 0.0663137 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=4.177 mas, bmaj=6.976 mas, bpa=-75.91 degrees ! Estimated noise=514.254 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 6.76306e-05 Jy ! Component: 100 - total flux cleaned = 4.4502e-05 Jy ! Component: 150 - total flux cleaned = 2.21121e-05 Jy ! Component: 200 - total flux cleaned = 2.21086e-05 Jy ! Total flux subtracted in 200 components = 2.21086e-05 Jy ! Clean residual min=-0.001239 max=0.001229 Jy/beam ! Clean residual mean=0.000009 rms=0.000307 Jy/beam ! Combined flux in latest and established models = 0.0663358 Jy selfcal ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 100 components and 0.0663358 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.074112Jy sigma=0.000629 ! Fit after self-cal, rms=0.074099Jy sigma=0.000629 wmodel J0806+5931_S_2017_09_26_pus_map.mod ! Writing 100 model components to file: J0806+5931_S_2017_09_26_pus_map.mod wobs J0806+5931_S_2017_09_26_pus_uvs.fits ! Writing UV FITS file: J0806+5931_S_2017_09_26_pus_uvs.fits wwins J0806+5931_S_2017_09_26_pus_map.win ! wwins: Wrote 3 windows to J0806+5931_S_2017_09_26_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.00034339 Jy ! Component: 100 - total flux cleaned = -0.000584422 Jy ! Component: 150 - total flux cleaned = -0.000566824 Jy ! Component: 200 - total flux cleaned = -0.000442572 Jy ! Component: 250 - total flux cleaned = -0.000288161 Jy ! Component: 300 - total flux cleaned = -0.000171956 Jy ! Component: 350 - total flux cleaned = -5.94914e-05 Jy ! Component: 400 - total flux cleaned = 8.11127e-05 Jy ! Component: 450 - total flux cleaned = 0.00018708 Jy ! Component: 500 - total flux cleaned = 0.000305134 Jy ! Component: 550 - total flux cleaned = 0.000434718 Jy ! Component: 600 - total flux cleaned = 0.000602689 Jy ! Component: 650 - total flux cleaned = 0.000670894 Jy ! Component: 700 - total flux cleaned = 0.00077817 Jy ! Component: 750 - total flux cleaned = 0.000883152 Jy ! Component: 800 - total flux cleaned = 0.000960393 Jy ! Component: 850 - total flux cleaned = 0.00106124 Jy ! Component: 900 - total flux cleaned = 0.00112315 Jy ! Component: 950 - total flux cleaned = 0.00115985 Jy ! Component: 1000 - total flux cleaned = 0.00125591 Jy ! Component: 1050 - total flux cleaned = 0.00132688 Jy ! Component: 1100 - total flux cleaned = 0.00138512 Jy ! Component: 1150 - total flux cleaned = 0.00144259 Jy ! Component: 1200 - total flux cleaned = 0.00151085 Jy ! Component: 1250 - total flux cleaned = 0.00158923 Jy ! Component: 1300 - total flux cleaned = 0.00161116 Jy ! Component: 1350 - total flux cleaned = 0.00165475 Jy ! Component: 1400 - total flux cleaned = 0.00168709 Jy ! Component: 1450 - total flux cleaned = 0.00175117 Jy ! Component: 1500 - total flux cleaned = 0.00178302 Jy ! Component: 1550 - total flux cleaned = 0.00186644 Jy ! Component: 1600 - total flux cleaned = 0.00190776 Jy ! Component: 1650 - total flux cleaned = 0.00196902 Jy ! Component: 1700 - total flux cleaned = 0.00201953 Jy ! Component: 1750 - total flux cleaned = 0.00204962 Jy ! Component: 1800 - total flux cleaned = 0.00210914 Jy ! Component: 1850 - total flux cleaned = 0.00219722 Jy ! Component: 1900 - total flux cleaned = 0.0022359 Jy ! Component: 1950 - total flux cleaned = 0.00229346 Jy ! Component: 2000 - total flux cleaned = 0.00236942 Jy ! Component: 2050 - total flux cleaned = 0.00244474 Jy ! Component: 2100 - total flux cleaned = 0.00252859 Jy ! Component: 2150 - total flux cleaned = 0.00262114 Jy ! Component: 2200 - total flux cleaned = 0.00266704 Jy ! Component: 2250 - total flux cleaned = 0.00276713 Jy ! Component: 2300 - total flux cleaned = 0.00284828 Jy ! Component: 2350 - total flux cleaned = 0.00293772 Jy ! Component: 2400 - total flux cleaned = 0.00299972 Jy ! Component: 2450 - total flux cleaned = 0.00307017 Jy ! Component: 2500 - total flux cleaned = 0.00314003 Jy ! Component: 2550 - total flux cleaned = 0.00321804 Jy ! Component: 2600 - total flux cleaned = 0.00331258 Jy ! Component: 2650 - total flux cleaned = 0.00336369 Jy ! Component: 2700 - total flux cleaned = 0.0034315 Jy ! Component: 2750 - total flux cleaned = 0.00351555 Jy ! Component: 2800 - total flux cleaned = 0.00358223 Jy ! Component: 2850 - total flux cleaned = 0.00362373 Jy ! Component: 2900 - total flux cleaned = 0.00371429 Jy ! Component: 2950 - total flux cleaned = 0.00377973 Jy ! Component: 3000 - total flux cleaned = 0.00386093 Jy ! Component: 3050 - total flux cleaned = 0.00397384 Jy ! Component: 3100 - total flux cleaned = 0.00402987 Jy ! Component: 3150 - total flux cleaned = 0.00410153 Jy ! Component: 3200 - total flux cleaned = 0.00418068 Jy ! Component: 3250 - total flux cleaned = 0.00425145 Jy ! Component: 3300 - total flux cleaned = 0.00434524 Jy ! Component: 3350 - total flux cleaned = 0.00443067 Jy ! Component: 3400 - total flux cleaned = 0.00447705 Jy ! Component: 3450 - total flux cleaned = 0.0045692 Jy ! Component: 3500 - total flux cleaned = 0.00465313 Jy ! Component: 3550 - total flux cleaned = 0.00475175 Jy ! Component: 3600 - total flux cleaned = 0.00481962 Jy ! Component: 3650 - total flux cleaned = 0.00491708 Jy ! Component: 3700 - total flux cleaned = 0.00497678 Jy ! Component: 3750 - total flux cleaned = 0.00506578 Jy ! Component: 3800 - total flux cleaned = 0.00514691 Jy ! Component: 3850 - total flux cleaned = 0.00523495 Jy ! Component: 3900 - total flux cleaned = 0.00529336 Jy ! Component: 3950 - total flux cleaned = 0.00538777 Jy ! Component: 4000 - total flux cleaned = 0.00548174 Jy ! Component: 4050 - total flux cleaned = 0.00556078 Jy ! Total flux subtracted in 4096 components = 0.00563237 Jy ! Clean residual min=-0.000393 max=0.000458 Jy/beam ! Clean residual mean=0.000009 rms=0.000127 Jy/beam ! Combined flux in latest and established models = 0.0719682 Jy keep ! Adding 256 model components to the UV plane model. ! The established model now contains 356 components and 0.0719682 Jy ![Exited script file: muppet] wmap "J0806+5931_S_2017_09_26_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.177 x 6.976 at -75.91 degrees (North through East) ! Clean map min=-0.00086646 max=0.048044 Jy/beam ! Writing clean map to FITS file: J0806+5931_S_2017_09_26_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.0480437 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.00012528 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.782286 0.782286 1.56457 3.12914 6.25829 12.5166 25.0332 50.0663 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0003 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.048 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.177 x 6.976 at -75.91 degrees (North through East) ! Clean map min=-0.00086646 max=0.048044 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J0806+5931_S_2017_09_26_pus_uvs.log closed on Sat May 11 12:58:44 2019