! Started logfile: J0805+6144_S_2017_05_27_pus_uvs.log on Fri May 3 11:01:43 2019 obs J0805+6144_S_2017_05_27_pus_uva.fits ! Reading UV FITS file: J0805+6144_S_2017_05_27_pus_uva.fits ! AN table 1: 22 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.544444 visibilities/baseline/integration-bin. ! Found source: J0805+6144 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 1211 lines of history. ! ! Reading 2156 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J0805+6144_S_2017_05_27_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 61 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 61 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 61 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 156 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.342753Jy sigma=0.039408 ! Fit after self-cal, rms=0.333048Jy sigma=0.039136 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=5.436 mas, bmaj=6.091 mas, bpa=-60.99 degrees ! Estimated noise=1879.05 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.34781 Jy ! Component: 100 - total flux cleaned = 0.53617 Jy ! Total flux subtracted in 100 components = 0.53617 Jy ! Clean residual min=-0.066610 max=0.115145 Jy/beam ! Clean residual mean=-0.000019 rms=0.022313 Jy/beam ! Combined flux in latest and established models = 0.53617 Jy ! Performing phase self-cal ! Adding 5 model components to the UV plane model. ! The established model now contains 5 components and 0.53617 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.376042Jy sigma=0.006250 ! Fit after self-cal, rms=0.375608Jy sigma=0.006249 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=6.273 mas, bmaj=6.766 mas, bpa=23.92 degrees ! Estimated noise=1317 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.113479 Jy ! Component: 100 - total flux cleaned = 0.187549 Jy ! Component: 150 - total flux cleaned = 0.239529 Jy ! Component: 200 - total flux cleaned = 0.268408 Jy ! Total flux subtracted in 200 components = 0.268408 Jy ! Clean residual min=-0.073181 max=0.076774 Jy/beam ! Clean residual mean=0.000006 rms=0.023029 Jy/beam ! Combined flux in latest and established models = 0.804578 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 16 components and 0.804578 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.274522Jy sigma=0.006050 ! Fit after self-cal, rms=0.274388Jy sigma=0.006049 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.81 FD 0.86 HN 0.86 KP 0.95 ! LA 0.94 MK 1.00* NL 0.81 OV 0.97 ! PT 1.00 SC 1.00 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 0.85 FD 0.96 HN 0.91 KP 0.91 ! LA 0.91 MK 1.00* NL 10.29 OV 1.03 ! PT 0.93 SC 1.11 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.85 FD 0.90 HN 0.90 KP 0.92 ! LA 0.89 MK 1.00* NL 0.91 OV 0.93 ! PT 0.98 SC 1.07 ! ! ! Correcting IF 4. ! A total of 36 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00 HN 0.69 KP 1.00* ! LA 1.17 MK 1.00* NL 1.00* OV 1.00* ! PT 1.06 SC 1.00* ! ! ! Fit before self-cal, rms=0.274388Jy sigma=0.006049 ! Fit after self-cal, rms=1.567745Jy sigma=0.001778 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=4.943 mas, bmaj=7.701 mas, bpa=-61.46 degrees ! Estimated noise=2371.99 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0472737 Jy ! Component: 100 - total flux cleaned = 0.0397854 Jy ! Component: 150 - total flux cleaned = 0.0339898 Jy ! Component: 200 - total flux cleaned = 0.0294529 Jy ! Total flux subtracted in 200 components = 0.0294529 Jy ! Clean residual min=-0.052538 max=0.033275 Jy/beam ! Clean residual mean=0.000001 rms=0.010140 Jy/beam ! Combined flux in latest and established models = 0.834031 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 23 components and 0.834031 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=1.555850Jy sigma=0.001630 ! Fit after self-cal, rms=1.555951Jy sigma=0.001622 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=1.555951Jy sigma=0.001622 ! Fit after self-cal, rms=0.125380Jy sigma=0.000881 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=4.948 mas, bmaj=7.831 mas, bpa=-61.24 degrees ! Estimated noise=2359.38 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00993935 Jy ! Component: 100 - total flux cleaned = -0.0122469 Jy ! Component: 150 - total flux cleaned = -0.0159127 Jy ! Component: 200 - total flux cleaned = -0.0199996 Jy ! Total flux subtracted in 200 components = -0.0199996 Jy ! Clean residual min=-0.026219 max=0.021915 Jy/beam ! Clean residual mean=-0.000015 rms=0.005712 Jy/beam ! Combined flux in latest and established models = 0.814031 Jy selfcal ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 29 components and 0.814031 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.117245Jy sigma=0.000814 ! Fit after self-cal, rms=0.117079Jy sigma=0.000812 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00357822 Jy ! Component: 100 - total flux cleaned = -0.00652227 Jy ! Component: 150 - total flux cleaned = -0.00873653 Jy ! Component: 200 - total flux cleaned = -0.0109122 Jy ! Total flux subtracted in 200 components = -0.0109122 Jy ! Clean residual min=-0.023694 max=0.022096 Jy/beam ! Clean residual mean=-0.000019 rms=0.005556 Jy/beam ! Combined flux in latest and established models = 0.803119 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 31 components and 0.803119 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.114775Jy sigma=0.000801 ! Fit after self-cal, rms=0.114781Jy sigma=0.000801 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.114781Jy sigma=0.000801 ! Fit after self-cal, rms=0.113537Jy sigma=0.000770 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=4.86 mas, bmaj=8.062 mas, bpa=-61.3 degrees ! Estimated noise=2403.67 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00738611 Jy ! Component: 100 - total flux cleaned = -0.00891774 Jy ! Component: 150 - total flux cleaned = -0.0105182 Jy ! Component: 200 - total flux cleaned = -0.0124453 Jy ! Total flux subtracted in 200 components = -0.0124453 Jy ! Clean residual min=-0.020202 max=0.017416 Jy/beam ! Clean residual mean=-0.000015 rms=0.004470 Jy/beam ! Combined flux in latest and established models = 0.790674 Jy selfcal ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 36 components and 0.790674 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.109529Jy sigma=0.000742 ! Fit after self-cal, rms=0.109474Jy sigma=0.000742 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00198076 Jy ! Component: 100 - total flux cleaned = -0.00343459 Jy ! Component: 150 - total flux cleaned = -0.00492147 Jy ! Component: 200 - total flux cleaned = -0.00604043 Jy ! Total flux subtracted in 200 components = -0.00604043 Jy ! Clean residual min=-0.018709 max=0.017554 Jy/beam ! Clean residual mean=-0.000017 rms=0.004399 Jy/beam ! Combined flux in latest and established models = 0.784633 Jy ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 41 components and 0.784633 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.108371Jy sigma=0.000737 ! Fit after self-cal, rms=0.108376Jy sigma=0.000737 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.108376Jy sigma=0.000737 ! Fit after self-cal, rms=0.107452Jy sigma=0.000721 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=9.192 mas, bmaj=10.78 mas, bpa=-50.17 degrees ! Estimated noise=2775.6 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00377443 Jy ! Component: 100 - total flux cleaned = -0.00463489 Jy ! Component: 150 - total flux cleaned = -0.00519177 Jy ! Component: 200 - total flux cleaned = -0.00584411 Jy ! Total flux subtracted in 200 components = -0.00584411 Jy ! Clean residual min=-0.015515 max=0.011634 Jy/beam ! Clean residual mean=-0.000018 rms=0.003441 Jy/beam ! Combined flux in latest and established models = 0.778789 Jy selfcal ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 48 components and 0.778789 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.106205Jy sigma=0.000713 ! Fit after self-cal, rms=0.106144Jy sigma=0.000713 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000653489 Jy ! Component: 100 - total flux cleaned = -0.00126475 Jy ! Component: 150 - total flux cleaned = -0.00170556 Jy ! Component: 200 - total flux cleaned = -0.00220221 Jy ! Total flux subtracted in 200 components = -0.00220221 Jy ! Clean residual min=-0.014979 max=0.011836 Jy/beam ! Clean residual mean=-0.000019 rms=0.003447 Jy/beam ! Combined flux in latest and established models = 0.776587 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 50 components and 0.776587 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.105624Jy sigma=0.000710 ! Fit after self-cal, rms=0.105620Jy sigma=0.000710 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=4.794 mas, bmaj=8.221 mas, bpa=-61.36 degrees ! Estimated noise=2427.54 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.794 x 8.221 at -61.36 degrees (North through East) ! Clean map min=-0.017276 max=0.58421 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.105620Jy sigma=0.000710 ! Fit after self-cal, rms=0.099295Jy sigma=0.000656 ! Inverting map and beam ! Estimated beam: bmin=4.793 mas, bmaj=8.289 mas, bpa=-61.35 degrees ! Estimated noise=2449.9 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00333808 Jy ! Component: 100 - total flux cleaned = -0.00427493 Jy ! Component: 150 - total flux cleaned = -0.00479042 Jy ! Component: 200 - total flux cleaned = -0.00522708 Jy ! Total flux subtracted in 200 components = -0.00522708 Jy ! Clean residual min=-0.014610 max=0.013755 Jy/beam ! Clean residual mean=-0.000012 rms=0.003398 Jy/beam ! Combined flux in latest and established models = 0.77136 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 56 components and 0.77136 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.097384Jy sigma=0.000645 ! Fit after self-cal, rms=0.097396Jy sigma=0.000645 ! Inverting map ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000568756 Jy ! Component: 100 - total flux cleaned = -0.00137342 Jy ! Component: 150 - total flux cleaned = -0.00196252 Jy ! Component: 200 - total flux cleaned = -0.00250341 Jy ! Total flux subtracted in 200 components = -0.00250341 Jy ! Clean residual min=-0.013610 max=0.013987 Jy/beam ! Clean residual mean=-0.000013 rms=0.003367 Jy/beam ! Combined flux in latest and established models = 0.768857 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 62 components and 0.768857 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.096806Jy sigma=0.000643 ! Fit after self-cal, rms=0.096812Jy sigma=0.000643 ! Inverting map ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.096812Jy sigma=0.000643 ! Fit after self-cal, rms=0.096125Jy sigma=0.000636 print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=4.014 mas, bmaj=7.71 mas, bpa=-61.67 degrees ! Estimated noise=3112.72 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.496724 Jy ! Component: 100 - total flux cleaned = 0.621368 Jy ! Component: 150 - total flux cleaned = 0.682296 Jy ! Component: 200 - total flux cleaned = 0.71938 Jy ! Total flux subtracted in 200 components = 0.71938 Jy ! Clean residual min=-0.017455 max=0.026718 Jy/beam ! Clean residual mean=-0.000012 rms=0.005234 Jy/beam ! Combined flux in latest and established models = 0.71938 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 22 model components to the UV plane model. ! The established model now contains 22 components and 0.71938 Jy ! Inverting map and beam ! Estimated beam: bmin=4.742 mas, bmaj=8.379 mas, bpa=-61.41 degrees ! Estimated noise=2460.86 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-88, 21.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0287633 Jy ! Component: 100 - total flux cleaned = 0.0398687 Jy ! Component: 150 - total flux cleaned = 0.0421306 Jy ! Component: 200 - total flux cleaned = 0.0428341 Jy ! Total flux subtracted in 200 components = 0.0428341 Jy ! Clean residual min=-0.013095 max=0.015908 Jy/beam ! Clean residual mean=-0.000012 rms=0.003495 Jy/beam ! Combined flux in latest and established models = 0.762214 Jy ! Adding 27 model components to the UV plane model. ! The established model now contains 40 components and 0.762214 Jy ! Inverting map ! Added new window around map position (-20.5, 27.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00844434 Jy ! Component: 100 - total flux cleaned = 0.00776336 Jy ! Component: 150 - total flux cleaned = 0.00587316 Jy ! Component: 200 - total flux cleaned = 0.00531478 Jy ! Total flux subtracted in 200 components = 0.00531478 Jy ! Clean residual min=-0.011016 max=0.012168 Jy/beam ! Clean residual mean=-0.000008 rms=0.002835 Jy/beam ! Combined flux in latest and established models = 0.767529 Jy ! Adding 21 model components to the UV plane model. ! The established model now contains 60 components and 0.767529 Jy ! Inverting map ! Added new window around map position (21, -28.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00527564 Jy ! Component: 100 - total flux cleaned = 0.00233669 Jy ! Component: 150 - total flux cleaned = 0.00121082 Jy ! Component: 200 - total flux cleaned = 0.00120656 Jy ! Total flux subtracted in 200 components = 0.00120656 Jy ! Clean residual min=-0.009239 max=0.008840 Jy/beam ! Clean residual mean=-0.000009 rms=0.002356 Jy/beam ! Combined flux in latest and established models = 0.768735 Jy ! Adding 26 model components to the UV plane model. ! The established model now contains 83 components and 0.768735 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=9.149 mas, bmaj=11.05 mas, bpa=-51.87 degrees ! Estimated noise=2808.08 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000889968 Jy ! Component: 100 - total flux cleaned = -0.002362 Jy ! Component: 150 - total flux cleaned = -0.00335042 Jy ! Component: 200 - total flux cleaned = -0.00411411 Jy ! Total flux subtracted in 200 components = -0.00411411 Jy ! Clean residual min=-0.008084 max=0.009362 Jy/beam ! Clean residual mean=-0.000018 rms=0.002334 Jy/beam ! Combined flux in latest and established models = 0.764621 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000573128 Jy ! Component: 100 - total flux cleaned = -0.00111645 Jy ! Component: 150 - total flux cleaned = -0.00150255 Jy ! Component: 200 - total flux cleaned = -0.00187375 Jy ! Total flux subtracted in 200 components = -0.00187375 Jy ! Clean residual min=-0.007771 max=0.008777 Jy/beam ! Clean residual mean=-0.000021 rms=0.002207 Jy/beam ! Combined flux in latest and established models = 0.762747 Jy ! Adding 34 model components to the UV plane model. ! The established model now contains 111 components and 0.762747 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=4.742 mas, bmaj=8.379 mas, bpa=-61.41 degrees ! Estimated noise=2460.86 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000206941 Jy ! Component: 100 - total flux cleaned = 0.000565641 Jy ! Component: 150 - total flux cleaned = 0.000402523 Jy ! Component: 200 - total flux cleaned = 0.000101542 Jy ! Total flux subtracted in 200 components = 0.000101542 Jy ! Clean residual min=-0.007846 max=0.007731 Jy/beam ! Clean residual mean=-0.000013 rms=0.001958 Jy/beam ! Combined flux in latest and established models = 0.762849 Jy selfcal ! Performing phase self-cal ! Adding 30 model components to the UV plane model. ! The established model now contains 133 components and 0.762849 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.088935Jy sigma=0.000594 ! Fit after self-cal, rms=0.088699Jy sigma=0.000592 wmodel J0805+6144_S_2017_05_27_pus_map.mod ! Writing 133 model components to file: J0805+6144_S_2017_05_27_pus_map.mod wobs J0805+6144_S_2017_05_27_pus_uvs.fits ! Writing UV FITS file: J0805+6144_S_2017_05_27_pus_uvs.fits wwins J0805+6144_S_2017_05_27_pus_map.win ! wwins: Wrote 4 windows to J0805+6144_S_2017_05_27_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.00161505 Jy ! Component: 100 - total flux cleaned = -0.0018729 Jy ! Component: 150 - total flux cleaned = -0.00187333 Jy ! Component: 200 - total flux cleaned = -0.00165003 Jy ! Component: 250 - total flux cleaned = -0.00154063 Jy ! Component: 300 - total flux cleaned = -0.00143726 Jy ! Component: 350 - total flux cleaned = -0.00133941 Jy ! Component: 400 - total flux cleaned = -0.00106029 Jy ! Component: 450 - total flux cleaned = -0.00088174 Jy ! Component: 500 - total flux cleaned = -0.000535483 Jy ! Component: 550 - total flux cleaned = -0.000282794 Jy ! Component: 600 - total flux cleaned = 0.000120274 Jy ! Component: 650 - total flux cleaned = 0.000123519 Jy ! Component: 700 - total flux cleaned = 0.000350656 Jy ! Component: 750 - total flux cleaned = 0.000423007 Jy ! Component: 800 - total flux cleaned = 0.000562851 Jy ! Component: 850 - total flux cleaned = 0.000633189 Jy ! Component: 900 - total flux cleaned = 0.00102949 Jy ! Component: 950 - total flux cleaned = 0.00109308 Jy ! Component: 1000 - total flux cleaned = 0.00109227 Jy ! Component: 1050 - total flux cleaned = 0.00109285 Jy ! Component: 1100 - total flux cleaned = 0.00103339 Jy ! Component: 1150 - total flux cleaned = 0.000975909 Jy ! Component: 1200 - total flux cleaned = 0.000976006 Jy ! Component: 1250 - total flux cleaned = 0.000866713 Jy ! Component: 1300 - total flux cleaned = 0.000814195 Jy ! Component: 1350 - total flux cleaned = 0.000972641 Jy ! Component: 1400 - total flux cleaned = 0.000919275 Jy ! Component: 1450 - total flux cleaned = 0.000816803 Jy ! Component: 1500 - total flux cleaned = 0.000916232 Jy ! Component: 1550 - total flux cleaned = 0.000866991 Jy ! Component: 1600 - total flux cleaned = 0.000770999 Jy ! Component: 1650 - total flux cleaned = 0.000818433 Jy ! Component: 1700 - total flux cleaned = 0.000864237 Jy ! Component: 1750 - total flux cleaned = 0.000953602 Jy ! Component: 1800 - total flux cleaned = 0.000819961 Jy ! Component: 1850 - total flux cleaned = 0.000776797 Jy ! Component: 1900 - total flux cleaned = 0.000819581 Jy ! Component: 1950 - total flux cleaned = 0.000650038 Jy ! Component: 2000 - total flux cleaned = 0.000690402 Jy ! Component: 2050 - total flux cleaned = 0.00056776 Jy ! Component: 2100 - total flux cleaned = 0.000607795 Jy ! Component: 2150 - total flux cleaned = 0.000488239 Jy ! Component: 2200 - total flux cleaned = 0.000487658 Jy ! Component: 2250 - total flux cleaned = 0.000526265 Jy ! Component: 2300 - total flux cleaned = 0.000449959 Jy ! Component: 2350 - total flux cleaned = 0.000374703 Jy ! Component: 2400 - total flux cleaned = 0.000374216 Jy ! Component: 2450 - total flux cleaned = 0.0002287 Jy ! Component: 2500 - total flux cleaned = 0.000372637 Jy ! Component: 2550 - total flux cleaned = 0.00040754 Jy ! Component: 2600 - total flux cleaned = 0.000407589 Jy ! Component: 2650 - total flux cleaned = 0.000545427 Jy ! Component: 2700 - total flux cleaned = 0.000510828 Jy ! Component: 2750 - total flux cleaned = 0.000544683 Jy ! Component: 2800 - total flux cleaned = 0.000677883 Jy ! Component: 2850 - total flux cleaned = 0.000644761 Jy ! Component: 2900 - total flux cleaned = 0.000709395 Jy ! Component: 2950 - total flux cleaned = 0.000838036 Jy ! Component: 3000 - total flux cleaned = 0.000806907 Jy ! Component: 3050 - total flux cleaned = 0.000900591 Jy ! Component: 3100 - total flux cleaned = 0.000714087 Jy ! Component: 3150 - total flux cleaned = 0.000806549 Jy ! Component: 3200 - total flux cleaned = 0.00059302 Jy ! Component: 3250 - total flux cleaned = 0.000593303 Jy ! Component: 3300 - total flux cleaned = 0.000473687 Jy ! Component: 3350 - total flux cleaned = 0.000384858 Jy ! Component: 3400 - total flux cleaned = 0.000326399 Jy ! Component: 3450 - total flux cleaned = 0.000297163 Jy ! Component: 3500 - total flux cleaned = 0.000210509 Jy ! Component: 3550 - total flux cleaned = 9.64517e-05 Jy ! Component: 3600 - total flux cleaned = 0.000124885 Jy ! Component: 3650 - total flux cleaned = 9.68155e-05 Jy ! Component: 3700 - total flux cleaned = -1.40345e-05 Jy ! Component: 3750 - total flux cleaned = -0.000123874 Jy ! Component: 3800 - total flux cleaned = -0.000123354 Jy ! Component: 3850 - total flux cleaned = -0.000123139 Jy ! Component: 3900 - total flux cleaned = -0.000150015 Jy ! Component: 3950 - total flux cleaned = -0.000229595 Jy ! Component: 4000 - total flux cleaned = -0.00028281 Jy ! Component: 4050 - total flux cleaned = -0.000387511 Jy ! Total flux subtracted in 4096 components = -0.000465601 Jy ! Clean residual min=-0.001376 max=0.001542 Jy/beam ! Clean residual mean=0.000011 rms=0.000475 Jy/beam ! Combined flux in latest and established models = 0.762383 Jy keep ! Adding 282 model components to the UV plane model. ! The established model now contains 415 components and 0.762383 Jy ![Exited script file: muppet] wmap "J0805+6144_S_2017_05_27_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.742 x 8.379 at -61.41 degrees (North through East) ! Clean map min=-0.00918 max=0.62406 Jy/beam ! Writing clean map to FITS file: J0805+6144_S_2017_05_27_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.624058 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000477777 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.229679 0.229679 0.459358 0.918716 1.83743 3.67486 7.34973 14.6995 29.3989 58.7978 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0014 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.624 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.742 x 8.379 at -61.41 degrees (North through East) ! Clean map min=-0.00918 max=0.62406 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J0805+6144_S_2017_05_27_pus_uvs.log closed on Fri May 3 11:01:49 2019