! Started logfile: J0805+6144_S_2017_01_16_pus_uvs.log on Sun Apr 7 15:08:49 2019 obs J0805+6144_S_2017_01_16_pus_uva.fits ! Reading UV FITS file: J0805+6144_S_2017_01_16_pus_uva.fits ! AN table 1: 16 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.604167 visibilities/baseline/integration-bin. ! Found source: J0805+6144 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 622 lines of history. ! ! Reading 1740 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J0805+6144_S_2017_01_16_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 36 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 36 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 36 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 66 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.497944Jy sigma=0.003165 ! Fit after self-cal, rms=0.494387Jy sigma=0.003136 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.82 mas, bmaj=9.853 mas, bpa=89.08 degrees ! Estimated noise=3137.64 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.433186 Jy ! Component: 100 - total flux cleaned = 0.556424 Jy ! Total flux subtracted in 100 components = 0.556424 Jy ! Clean residual min=-0.029585 max=0.051038 Jy/beam ! Clean residual mean=-0.000006 rms=0.009949 Jy/beam ! Combined flux in latest and established models = 0.556423 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 14 components and 0.556423 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.190036Jy sigma=0.001159 ! Fit after self-cal, rms=0.190100Jy sigma=0.001158 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=4.553 mas, bmaj=10.89 mas, bpa=-89.71 degrees ! Estimated noise=2629.36 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0528672 Jy ! Component: 100 - total flux cleaned = 0.0761876 Jy ! Component: 150 - total flux cleaned = 0.0891977 Jy ! Component: 200 - total flux cleaned = 0.0969652 Jy ! Total flux subtracted in 200 components = 0.0969652 Jy ! Clean residual min=-0.026299 max=0.034383 Jy/beam ! Clean residual mean=0.000068 rms=0.009388 Jy/beam ! Combined flux in latest and established models = 0.653389 Jy ! Performing phase self-cal ! Adding 52 model components to the UV plane model. ! The established model now contains 63 components and 0.653389 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.182177Jy sigma=0.001012 ! Fit after self-cal, rms=0.182140Jy sigma=0.001011 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 0.92 HN 0.98 KP 0.96 ! LA 0.98 MK 1.00* NL 0.85 OV 0.94 ! PT 1.10 SC 0.91 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.02 FD 0.98 HN 1.02 KP 0.92 ! LA 0.93 MK 1.00* NL 0.98 OV 0.95 ! PT 1.14 SC 0.96 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.07 FD 0.99 HN 0.99 KP 0.91 ! LA 0.99 MK 1.00* NL 0.97 OV 0.91 ! PT 1.14 SC 0.96 ! ! ! Correcting IF 4. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.10 FD 1.01 HN 1.04 KP 1.00* ! LA 1.11 MK 1.00* NL 1.00* OV 0.94 ! PT 1.14 SC 1.64 ! ! ! Fit before self-cal, rms=0.182140Jy sigma=0.001011 ! Fit after self-cal, rms=0.183562Jy sigma=0.000916 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=4.528 mas, bmaj=11 mas, bpa=-89.74 degrees ! Estimated noise=2575.78 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00822879 Jy ! Component: 100 - total flux cleaned = -0.00941014 Jy ! Component: 150 - total flux cleaned = -0.0102264 Jy ! Component: 200 - total flux cleaned = -0.0100931 Jy ! Total flux subtracted in 200 components = -0.0100931 Jy ! Clean residual min=-0.024935 max=0.029477 Jy/beam ! Clean residual mean=0.000085 rms=0.008115 Jy/beam ! Combined flux in latest and established models = 0.643296 Jy ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 83 components and 0.643296 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.181952Jy sigma=0.000915 ! Fit after self-cal, rms=0.182105Jy sigma=0.000914 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.182105Jy sigma=0.000914 ! Fit after self-cal, rms=0.189329Jy sigma=0.000668 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=4.519 mas, bmaj=10.95 mas, bpa=-89.75 degrees ! Estimated noise=2577.97 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00350738 Jy ! Component: 100 - total flux cleaned = 0.00339399 Jy ! Component: 150 - total flux cleaned = 0.0033018 Jy ! Component: 200 - total flux cleaned = 0.00306525 Jy ! Total flux subtracted in 200 components = 0.00306525 Jy ! Clean residual min=-0.006582 max=0.006990 Jy/beam ! Clean residual mean=-0.000056 rms=0.001802 Jy/beam ! Combined flux in latest and established models = 0.646361 Jy selfcal ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 93 components and 0.646361 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.189083Jy sigma=0.000665 ! Fit after self-cal, rms=0.189704Jy sigma=0.000664 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 1.19002e-05 Jy ! Component: 100 - total flux cleaned = -0.000223248 Jy ! Component: 150 - total flux cleaned = -0.000269643 Jy ! Component: 200 - total flux cleaned = -0.00031466 Jy ! Total flux subtracted in 200 components = -0.00031466 Jy ! Clean residual min=-0.006606 max=0.006733 Jy/beam ! Clean residual mean=-0.000056 rms=0.001781 Jy/beam ! Combined flux in latest and established models = 0.646046 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 101 components and 0.646046 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.189653Jy sigma=0.000664 ! Fit after self-cal, rms=0.189650Jy sigma=0.000664 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.189650Jy sigma=0.000664 ! Fit after self-cal, rms=0.193840Jy sigma=0.000662 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=4.506 mas, bmaj=10.92 mas, bpa=-89.93 degrees ! Estimated noise=2576.39 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00247862 Jy ! Component: 100 - total flux cleaned = 0.00240125 Jy ! Component: 150 - total flux cleaned = 0.00234312 Jy ! Component: 200 - total flux cleaned = 0.0022984 Jy ! Total flux subtracted in 200 components = 0.0022984 Jy ! Clean residual min=-0.006402 max=0.006467 Jy/beam ! Clean residual mean=-0.000052 rms=0.001681 Jy/beam ! Combined flux in latest and established models = 0.648345 Jy selfcal ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 103 components and 0.648345 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.193738Jy sigma=0.000661 ! Fit after self-cal, rms=0.193753Jy sigma=0.000661 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -7.84818e-05 Jy ! Component: 100 - total flux cleaned = -3.90876e-05 Jy ! Component: 150 - total flux cleaned = -5.42212e-06 Jy ! Component: 200 - total flux cleaned = -5.58217e-06 Jy ! Total flux subtracted in 200 components = -5.58217e-06 Jy ! Clean residual min=-0.006404 max=0.006339 Jy/beam ! Clean residual mean=-0.000052 rms=0.001673 Jy/beam ! Combined flux in latest and established models = 0.648339 Jy ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 107 components and 0.648339 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.193727Jy sigma=0.000661 ! Fit after self-cal, rms=0.193727Jy sigma=0.000661 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.193727Jy sigma=0.000661 ! Fit after self-cal, rms=0.193453Jy sigma=0.000660 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.365 mas, bmaj=13.61 mas, bpa=86.11 degrees ! Estimated noise=2946.04 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0014823 Jy ! Component: 100 - total flux cleaned = 0.00157779 Jy ! Component: 150 - total flux cleaned = 0.00175331 Jy ! Component: 200 - total flux cleaned = 0.00184159 Jy ! Total flux subtracted in 200 components = 0.00184159 Jy ! Clean residual min=-0.006362 max=0.005877 Jy/beam ! Clean residual mean=-0.000080 rms=0.001818 Jy/beam ! Combined flux in latest and established models = 0.650181 Jy selfcal ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 110 components and 0.650181 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.193459Jy sigma=0.000660 ! Fit after self-cal, rms=0.193453Jy sigma=0.000660 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -3.05954e-06 Jy ! Component: 100 - total flux cleaned = -2.53161e-06 Jy ! Component: 150 - total flux cleaned = 2.98321e-05 Jy ! Component: 200 - total flux cleaned = 5.56614e-05 Jy ! Total flux subtracted in 200 components = 5.56614e-05 Jy ! Clean residual min=-0.006417 max=0.005885 Jy/beam ! Clean residual mean=-0.000080 rms=0.001812 Jy/beam ! Combined flux in latest and established models = 0.650236 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 112 components and 0.650236 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.193446Jy sigma=0.000660 ! Fit after self-cal, rms=0.193441Jy sigma=0.000660 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=4.497 mas, bmaj=10.9 mas, bpa=89.94 degrees ! Estimated noise=2575.67 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.497 x 10.9 at 89.94 degrees (North through East) ! Clean map min=-0.0064191 max=0.54903 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.193441Jy sigma=0.000660 ! Fit after self-cal, rms=0.251535Jy sigma=0.000603 ! Inverting map and beam ! Estimated beam: bmin=4.5 mas, bmaj=10.9 mas, bpa=89.85 degrees ! Estimated noise=2576.11 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00152067 Jy ! Component: 100 - total flux cleaned = 0.00152773 Jy ! Component: 150 - total flux cleaned = 0.00139482 Jy ! Component: 200 - total flux cleaned = 0.00121103 Jy ! Total flux subtracted in 200 components = 0.00121103 Jy ! Clean residual min=-0.006333 max=0.006008 Jy/beam ! Clean residual mean=-0.000045 rms=0.001588 Jy/beam ! Combined flux in latest and established models = 0.651447 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 116 components and 0.651447 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.251450Jy sigma=0.000603 ! Fit after self-cal, rms=0.251453Jy sigma=0.000603 ! Inverting map ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -2.76461e-05 Jy ! Component: 100 - total flux cleaned = 5.28822e-06 Jy ! Component: 150 - total flux cleaned = 4.00892e-06 Jy ! Component: 200 - total flux cleaned = 4.6086e-06 Jy ! Total flux subtracted in 200 components = 4.6086e-06 Jy ! Clean residual min=-0.006299 max=0.005937 Jy/beam ! Clean residual mean=-0.000045 rms=0.001585 Jy/beam ! Combined flux in latest and established models = 0.651452 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 116 components and 0.651452 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.251427Jy sigma=0.000603 ! Fit after self-cal, rms=0.251426Jy sigma=0.000603 ! Inverting map ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.251426Jy sigma=0.000603 ! Fit after self-cal, rms=0.249190Jy sigma=0.000602 print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.789 mas, bmaj=9.88 mas, bpa=88.87 degrees ! Estimated noise=3017.56 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.416452 Jy ! Component: 100 - total flux cleaned = 0.539061 Jy ! Component: 150 - total flux cleaned = 0.594669 Jy ! Component: 200 - total flux cleaned = 0.621191 Jy ! Total flux subtracted in 200 components = 0.621191 Jy ! Clean residual min=-0.008742 max=0.011929 Jy/beam ! Clean residual mean=-0.000008 rms=0.002449 Jy/beam ! Combined flux in latest and established models = 0.621191 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 27 model components to the UV plane model. ! The established model now contains 27 components and 0.621191 Jy ! Inverting map and beam ! Estimated beam: bmin=4.492 mas, bmaj=10.89 mas, bpa=89.79 degrees ! Estimated noise=2574.46 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0142671 Jy ! Component: 100 - total flux cleaned = 0.0217137 Jy ! Component: 150 - total flux cleaned = 0.0262127 Jy ! Component: 200 - total flux cleaned = 0.0289823 Jy ! Total flux subtracted in 200 components = 0.0289823 Jy ! Clean residual min=-0.006377 max=0.006803 Jy/beam ! Clean residual mean=-0.000041 rms=0.001625 Jy/beam ! Combined flux in latest and established models = 0.650173 Jy ! Adding 29 model components to the UV plane model. ! The established model now contains 53 components and 0.650173 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.342 mas, bmaj=13.61 mas, bpa=85.88 degrees ! Estimated noise=2950.44 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00157025 Jy ! Component: 100 - total flux cleaned = 0.0018583 Jy ! Component: 150 - total flux cleaned = 0.00213746 Jy ! Component: 200 - total flux cleaned = 0.00235233 Jy ! Total flux subtracted in 200 components = 0.00235233 Jy ! Clean residual min=-0.006631 max=0.005666 Jy/beam ! Clean residual mean=-0.000073 rms=0.001802 Jy/beam ! Combined flux in latest and established models = 0.652525 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000105429 Jy ! Component: 100 - total flux cleaned = 0.000168431 Jy ! Component: 150 - total flux cleaned = 0.000199407 Jy ! Component: 200 - total flux cleaned = 0.00022707 Jy ! Total flux subtracted in 200 components = 0.00022707 Jy ! Clean residual min=-0.006625 max=0.005664 Jy/beam ! Clean residual mean=-0.000073 rms=0.001792 Jy/beam ! Combined flux in latest and established models = 0.652753 Jy ! Adding 19 model components to the UV plane model. ! The established model now contains 69 components and 0.652752 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=4.492 mas, bmaj=10.89 mas, bpa=89.79 degrees ! Estimated noise=2574.46 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00049188 Jy ! Component: 100 - total flux cleaned = 0.000420383 Jy ! Component: 150 - total flux cleaned = 0.000417812 Jy ! Component: 200 - total flux cleaned = 0.000418167 Jy ! Total flux subtracted in 200 components = 0.000418167 Jy ! Clean residual min=-0.006150 max=0.006136 Jy/beam ! Clean residual mean=-0.000045 rms=0.001573 Jy/beam ! Combined flux in latest and established models = 0.653171 Jy selfcal ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 79 components and 0.653171 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.249223Jy sigma=0.000602 ! Fit after self-cal, rms=0.249203Jy sigma=0.000602 wmodel J0805+6144_S_2017_01_16_pus_map.mod ! Writing 79 model components to file: J0805+6144_S_2017_01_16_pus_map.mod wobs J0805+6144_S_2017_01_16_pus_uvs.fits ! Writing UV FITS file: J0805+6144_S_2017_01_16_pus_uvs.fits wwins J0805+6144_S_2017_01_16_pus_map.win ! wwins: Wrote 1 windows to J0805+6144_S_2017_01_16_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000319831 Jy ! Component: 100 - total flux cleaned = -0.00113754 Jy ! Component: 150 - total flux cleaned = -0.00210538 Jy ! Component: 200 - total flux cleaned = -0.00275168 Jy ! Component: 250 - total flux cleaned = -0.00354172 Jy ! Component: 300 - total flux cleaned = -0.00404892 Jy ! Component: 350 - total flux cleaned = -0.00437593 Jy ! Component: 400 - total flux cleaned = -0.00461428 Jy ! Component: 450 - total flux cleaned = -0.00484323 Jy ! Component: 500 - total flux cleaned = -0.00484023 Jy ! Component: 550 - total flux cleaned = -0.00483849 Jy ! Component: 600 - total flux cleaned = -0.00504801 Jy ! Component: 650 - total flux cleaned = -0.00525325 Jy ! Component: 700 - total flux cleaned = -0.00545264 Jy ! Component: 750 - total flux cleaned = -0.00564693 Jy ! Component: 800 - total flux cleaned = -0.00571021 Jy ! Component: 850 - total flux cleaned = -0.00571101 Jy ! Component: 900 - total flux cleaned = -0.00595398 Jy ! Component: 950 - total flux cleaned = -0.00631082 Jy ! Component: 1000 - total flux cleaned = -0.0065444 Jy ! Component: 1050 - total flux cleaned = -0.00694621 Jy ! Component: 1100 - total flux cleaned = -0.00711567 Jy ! Component: 1150 - total flux cleaned = -0.00733855 Jy ! Component: 1200 - total flux cleaned = -0.00739374 Jy ! Component: 1250 - total flux cleaned = -0.00771711 Jy ! Component: 1300 - total flux cleaned = -0.00787516 Jy ! Component: 1350 - total flux cleaned = -0.00787391 Jy ! Component: 1400 - total flux cleaned = -0.00797699 Jy ! Component: 1450 - total flux cleaned = -0.00792656 Jy ! Component: 1500 - total flux cleaned = -0.00817806 Jy ! Component: 1550 - total flux cleaned = -0.00822713 Jy ! Component: 1600 - total flux cleaned = -0.0083725 Jy ! Component: 1650 - total flux cleaned = -0.00842032 Jy ! Component: 1700 - total flux cleaned = -0.00837326 Jy ! Component: 1750 - total flux cleaned = -0.0086093 Jy ! Component: 1800 - total flux cleaned = -0.00884263 Jy ! Component: 1850 - total flux cleaned = -0.00907308 Jy ! Component: 1900 - total flux cleaned = -0.00898191 Jy ! Component: 1950 - total flux cleaned = -0.00943341 Jy ! Component: 2000 - total flux cleaned = -0.00952284 Jy ! Component: 2050 - total flux cleaned = -0.00978855 Jy ! Component: 2100 - total flux cleaned = -0.00996385 Jy ! Component: 2150 - total flux cleaned = -0.0102234 Jy ! Component: 2200 - total flux cleaned = -0.0105231 Jy ! Component: 2250 - total flux cleaned = -0.0106497 Jy ! Component: 2300 - total flux cleaned = -0.0108175 Jy ! Component: 2350 - total flux cleaned = -0.0110255 Jy ! Component: 2400 - total flux cleaned = -0.01119 Jy ! Component: 2450 - total flux cleaned = -0.0113531 Jy ! Component: 2500 - total flux cleaned = -0.0115152 Jy ! Component: 2550 - total flux cleaned = -0.0117559 Jy ! Component: 2600 - total flux cleaned = -0.0118749 Jy ! Component: 2650 - total flux cleaned = -0.0120324 Jy ! Component: 2700 - total flux cleaned = -0.0121107 Jy ! Component: 2750 - total flux cleaned = -0.0122657 Jy ! Component: 2800 - total flux cleaned = -0.0123044 Jy ! Component: 2850 - total flux cleaned = -0.0125712 Jy ! Component: 2900 - total flux cleaned = -0.0125711 Jy ! Component: 2950 - total flux cleaned = -0.0127586 Jy ! Component: 3000 - total flux cleaned = -0.0129449 Jy ! Component: 3050 - total flux cleaned = -0.0129814 Jy ! Component: 3100 - total flux cleaned = -0.0129083 Jy ! Component: 3150 - total flux cleaned = -0.0129449 Jy ! Component: 3200 - total flux cleaned = -0.0128726 Jy ! Component: 3250 - total flux cleaned = -0.0129088 Jy ! Component: 3300 - total flux cleaned = -0.0129445 Jy ! Component: 3350 - total flux cleaned = -0.0129443 Jy ! Component: 3400 - total flux cleaned = -0.012909 Jy ! Component: 3450 - total flux cleaned = -0.012909 Jy ! Component: 3500 - total flux cleaned = -0.0128743 Jy ! Component: 3550 - total flux cleaned = -0.0127361 Jy ! Component: 3600 - total flux cleaned = -0.0128392 Jy ! Component: 3650 - total flux cleaned = -0.0128052 Jy ! Component: 3700 - total flux cleaned = -0.012907 Jy ! Component: 3750 - total flux cleaned = -0.0128397 Jy ! Component: 3800 - total flux cleaned = -0.0129068 Jy ! Component: 3850 - total flux cleaned = -0.01284 Jy ! Component: 3900 - total flux cleaned = -0.0127405 Jy ! Component: 3950 - total flux cleaned = -0.0128064 Jy ! Component: 4000 - total flux cleaned = -0.0126747 Jy ! Component: 4050 - total flux cleaned = -0.0126749 Jy ! Total flux subtracted in 4096 components = -0.0127727 Jy ! Clean residual min=-0.001855 max=0.001915 Jy/beam ! Clean residual mean=-0.000004 rms=0.000615 Jy/beam ! Combined flux in latest and established models = 0.640398 Jy keep ! Adding 311 model components to the UV plane model. ! The established model now contains 390 components and 0.640398 Jy ![Exited script file: muppet] wmap "J0805+6144_S_2017_01_16_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.492 x 10.89 at 89.79 degrees (North through East) ! Clean map min=-0.0052001 max=0.54897 Jy/beam ! Writing clean map to FITS file: J0805+6144_S_2017_01_16_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.548967 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.00059338 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.324271 0.324271 0.648542 1.29708 2.59417 5.18834 10.3767 20.7533 41.5067 83.0134 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0017 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.548 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.492 x 10.89 at 89.79 degrees (North through East) ! Clean map min=-0.0052001 max=0.54897 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J0805+6144_S_2017_01_16_pus_uvs.log closed on Sun Apr 7 15:08:55 2019