! Started logfile: J0804-1712_S_2017_08_12_pus_uvs.log on Fri May 10 14:55:25 2019 obs J0804-1712_S_2017_08_12_pus_uva.fits ! Reading UV FITS file: J0804-1712_S_2017_08_12_pus_uva.fits ! AN table 1: 96 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.766204 visibilities/baseline/integration-bin. ! Found source: J0804-1712 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 594 lines of history. ! ! Reading 13240 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J0804-1712_S_2017_08_12_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 151 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 116 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 136 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 656 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.953417Jy sigma=0.007140 ! Fit after self-cal, rms=0.930234Jy sigma=0.006987 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.551 mas, bmaj=6.621 mas, bpa=-5.212 degrees ! Estimated noise=1221.6 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0523032 Jy ! Component: 100 - total flux cleaned = 0.0663883 Jy ! Total flux subtracted in 100 components = 0.0663883 Jy ! Clean residual min=-0.005518 max=0.009011 Jy/beam ! Clean residual mean=-0.000026 rms=0.001479 Jy/beam ! Combined flux in latest and established models = 0.0663883 Jy ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 15 components and 0.0663883 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.096009Jy sigma=0.000693 ! Fit after self-cal, rms=0.095849Jy sigma=0.000692 ! Inverting map ! Added new window around map position (-4.5, -2). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00947635 Jy ! Component: 100 - total flux cleaned = 0.0158706 Jy ! Total flux subtracted in 100 components = 0.0158706 Jy ! Clean residual min=-0.004505 max=0.006438 Jy/beam ! Clean residual mean=-0.000020 rms=0.001207 Jy/beam ! Combined flux in latest and established models = 0.082259 Jy ! Performing phase self-cal ! Adding 29 model components to the UV plane model. ! The established model now contains 43 components and 0.082259 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.094115Jy sigma=0.000679 ! Fit after self-cal, rms=0.093989Jy sigma=0.000678 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.092 mas, bmaj=8.033 mas, bpa=-4.951 degrees ! Estimated noise=957.597 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00975572 Jy ! Component: 100 - total flux cleaned = 0.0153814 Jy ! Component: 150 - total flux cleaned = 0.0189358 Jy ! Component: 200 - total flux cleaned = 0.0212514 Jy ! Total flux subtracted in 200 components = 0.0212514 Jy ! Clean residual min=-0.004263 max=0.005023 Jy/beam ! Clean residual mean=-0.000028 rms=0.001280 Jy/beam ! Combined flux in latest and established models = 0.10351 Jy ! Performing phase self-cal ! Adding 40 model components to the UV plane model. ! The established model now contains 72 components and 0.10351 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.092886Jy sigma=0.000670 ! Fit after self-cal, rms=0.092683Jy sigma=0.000669 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.92 HN 1.19 KP 0.99 ! LA 0.92 MK 1.03 NL 0.95 OV 1.11 ! PT 0.98 SC 0.95 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.91 HN 1.22 KP 0.99 ! LA 0.90 MK 1.04 NL 1.13 OV 1.09 ! PT 1.01 SC 0.97 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.99 HN 1.07 KP 0.98 ! LA 0.87 MK 0.97 NL 1.04 OV 0.97 ! PT 1.01 SC 1.02 ! ! ! Correcting IF 4. ! A total of 132 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.82 HN 1.10 KP 1.00* ! LA 1.00* MK 0.74 NL 1.00* OV 1.00* ! PT 0.84 SC 1.00* ! ! ! Fit before self-cal, rms=0.092683Jy sigma=0.000669 ! Fit after self-cal, rms=0.093298Jy sigma=0.000667 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.104 mas, bmaj=8.012 mas, bpa=-4.271 degrees ! Estimated noise=967.852 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00117547 Jy ! Component: 100 - total flux cleaned = 0.00123547 Jy ! Component: 150 - total flux cleaned = 0.00127782 Jy ! Component: 200 - total flux cleaned = 0.0012774 Jy ! Total flux subtracted in 200 components = 0.0012774 Jy ! Clean residual min=-0.003910 max=0.004075 Jy/beam ! Clean residual mean=-0.000015 rms=0.001096 Jy/beam ! Combined flux in latest and established models = 0.104788 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 83 components and 0.104788 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.093237Jy sigma=0.000667 ! Fit after self-cal, rms=0.093287Jy sigma=0.000667 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.093287Jy sigma=0.000667 ! Fit after self-cal, rms=0.095899Jy sigma=0.000662 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.106 mas, bmaj=8.063 mas, bpa=-4.403 degrees ! Estimated noise=970.038 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00028448 Jy ! Component: 100 - total flux cleaned = 0.000107697 Jy ! Component: 150 - total flux cleaned = 2.28185e-05 Jy ! Component: 200 - total flux cleaned = -2.50877e-05 Jy ! Total flux subtracted in 200 components = -2.50877e-05 Jy ! Clean residual min=-0.003350 max=0.003202 Jy/beam ! Clean residual mean=-0.000005 rms=0.000846 Jy/beam ! Combined flux in latest and established models = 0.104763 Jy selfcal ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 87 components and 0.104763 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.095871Jy sigma=0.000662 ! Fit after self-cal, rms=0.096051Jy sigma=0.000661 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0001902 Jy ! Component: 100 - total flux cleaned = 0.000189433 Jy ! Component: 150 - total flux cleaned = 0.000164567 Jy ! Component: 200 - total flux cleaned = 0.000142829 Jy ! Total flux subtracted in 200 components = 0.000142829 Jy ! Clean residual min=-0.003352 max=0.003066 Jy/beam ! Clean residual mean=-0.000005 rms=0.000833 Jy/beam ! Combined flux in latest and established models = 0.104906 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 93 components and 0.104906 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.096033Jy sigma=0.000661 ! Fit after self-cal, rms=0.096030Jy sigma=0.000661 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.096030Jy sigma=0.000661 ! Fit after self-cal, rms=0.096751Jy sigma=0.000661 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.101 mas, bmaj=8.073 mas, bpa=-4.377 degrees ! Estimated noise=968.539 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 3.73155e-05 Jy ! Component: 100 - total flux cleaned = -8.72411e-05 Jy ! Component: 150 - total flux cleaned = -0.000151524 Jy ! Component: 200 - total flux cleaned = -0.000168653 Jy ! Total flux subtracted in 200 components = -0.000168653 Jy ! Clean residual min=-0.003281 max=0.002935 Jy/beam ! Clean residual mean=-0.000004 rms=0.000824 Jy/beam ! Combined flux in latest and established models = 0.104737 Jy selfcal ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 93 components and 0.104737 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.096736Jy sigma=0.000661 ! Fit after self-cal, rms=0.096765Jy sigma=0.000661 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -4.09677e-05 Jy ! Component: 100 - total flux cleaned = -4.16714e-05 Jy ! Component: 150 - total flux cleaned = -6.09511e-05 Jy ! Component: 200 - total flux cleaned = -9.19015e-05 Jy ! Total flux subtracted in 200 components = -9.19015e-05 Jy ! Clean residual min=-0.003271 max=0.002884 Jy/beam ! Clean residual mean=-0.000004 rms=0.000821 Jy/beam ! Combined flux in latest and established models = 0.104645 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 93 components and 0.104645 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.096755Jy sigma=0.000661 ! Fit after self-cal, rms=0.096751Jy sigma=0.000661 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.096751Jy sigma=0.000661 ! Fit after self-cal, rms=0.096863Jy sigma=0.000661 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.565 mas, bmaj=16.63 mas, bpa=-2.558 degrees ! Estimated noise=1247.18 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000158865 Jy ! Component: 100 - total flux cleaned = 0.000158829 Jy ! Component: 150 - total flux cleaned = 0.000158577 Jy ! Component: 200 - total flux cleaned = 0.000158904 Jy ! Total flux subtracted in 200 components = 0.000158904 Jy ! Clean residual min=-0.004226 max=0.003566 Jy/beam ! Clean residual mean=-0.000008 rms=0.001306 Jy/beam ! Combined flux in latest and established models = 0.104804 Jy selfcal ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 99 components and 0.104804 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.096867Jy sigma=0.000661 ! Fit after self-cal, rms=0.096864Jy sigma=0.000661 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 4.2786e-05 Jy ! Component: 100 - total flux cleaned = 6.19526e-05 Jy ! Component: 150 - total flux cleaned = 6.25199e-05 Jy ! Component: 200 - total flux cleaned = 6.31214e-05 Jy ! Total flux subtracted in 200 components = 6.31214e-05 Jy ! Clean residual min=-0.004231 max=0.003626 Jy/beam ! Clean residual mean=-0.000008 rms=0.001308 Jy/beam ! Combined flux in latest and established models = 0.104867 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 103 components and 0.104867 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.096867Jy sigma=0.000661 ! Fit after self-cal, rms=0.096858Jy sigma=0.000661 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.098 mas, bmaj=8.085 mas, bpa=-4.437 degrees ! Estimated noise=967.234 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.098 x 8.085 at -4.437 degrees (North through East) ! Clean map min=-0.0031462 max=0.068932 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.54 mas, bmaj=6.62 mas, bpa=-4.783 degrees ! Estimated noise=1259.86 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.051212 Jy ! Component: 100 - total flux cleaned = 0.0678042 Jy ! Component: 150 - total flux cleaned = 0.0785901 Jy ! Component: 200 - total flux cleaned = 0.0860477 Jy ! Total flux subtracted in 200 components = 0.0860477 Jy ! Clean residual min=-0.004355 max=0.004721 Jy/beam ! Clean residual mean=-0.000013 rms=0.001116 Jy/beam ! Combined flux in latest and established models = 0.0860477 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 23 model components to the UV plane model. ! The established model now contains 23 components and 0.0860477 Jy ! Inverting map and beam ! Estimated beam: bmin=3.098 mas, bmaj=8.085 mas, bpa=-4.437 degrees ! Estimated noise=967.234 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00804874 Jy ! Component: 100 - total flux cleaned = 0.0125921 Jy ! Component: 150 - total flux cleaned = 0.0153216 Jy ! Component: 200 - total flux cleaned = 0.0168781 Jy ! Total flux subtracted in 200 components = 0.0168781 Jy ! Clean residual min=-0.003543 max=0.003327 Jy/beam ! Clean residual mean=-0.000006 rms=0.000862 Jy/beam ! Combined flux in latest and established models = 0.102926 Jy ! Adding 33 model components to the UV plane model. ! The established model now contains 53 components and 0.102926 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.565 mas, bmaj=16.63 mas, bpa=-2.558 degrees ! Estimated noise=1247.18 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00125648 Jy ! Component: 100 - total flux cleaned = 0.00141123 Jy ! Component: 150 - total flux cleaned = 0.00154094 Jy ! Component: 200 - total flux cleaned = 0.00165175 Jy ! Total flux subtracted in 200 components = 0.00165175 Jy ! Clean residual min=-0.004471 max=0.003801 Jy/beam ! Clean residual mean=-0.000009 rms=0.001325 Jy/beam ! Combined flux in latest and established models = 0.104578 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 9.70547e-05 Jy ! Component: 100 - total flux cleaned = 0.000179315 Jy ! Component: 150 - total flux cleaned = 0.00022935 Jy ! Component: 200 - total flux cleaned = 0.000250373 Jy ! Total flux subtracted in 200 components = 0.000250373 Jy ! Clean residual min=-0.004362 max=0.003716 Jy/beam ! Clean residual mean=-0.000008 rms=0.001316 Jy/beam ! Combined flux in latest and established models = 0.104828 Jy ! Adding 19 model components to the UV plane model. ! The established model now contains 70 components and 0.104828 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.098 mas, bmaj=8.085 mas, bpa=-4.437 degrees ! Estimated noise=967.234 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000148846 Jy ! Component: 100 - total flux cleaned = -0.000147964 Jy ! Component: 150 - total flux cleaned = -0.000107719 Jy ! Component: 200 - total flux cleaned = -0.000141896 Jy ! Total flux subtracted in 200 components = -0.000141896 Jy ! Clean residual min=-0.003235 max=0.002952 Jy/beam ! Clean residual mean=-0.000004 rms=0.000834 Jy/beam ! Combined flux in latest and established models = 0.104686 Jy selfcal ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 84 components and 0.104686 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.096890Jy sigma=0.000661 ! Fit after self-cal, rms=0.096894Jy sigma=0.000661 wmodel J0804-1712_S_2017_08_12_pus_map.mod ! Writing 84 model components to file: J0804-1712_S_2017_08_12_pus_map.mod wobs J0804-1712_S_2017_08_12_pus_uvs.fits ! Writing UV FITS file: J0804-1712_S_2017_08_12_pus_uvs.fits wwins J0804-1712_S_2017_08_12_pus_map.win ! wwins: Wrote 2 windows to J0804-1712_S_2017_08_12_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.00103788 Jy ! Component: 100 - total flux cleaned = -0.00150781 Jy ! Component: 150 - total flux cleaned = -0.00150731 Jy ! Component: 200 - total flux cleaned = -0.00145996 Jy ! Component: 250 - total flux cleaned = -0.00128109 Jy ! Component: 300 - total flux cleaned = -0.00106593 Jy ! Component: 350 - total flux cleaned = -0.000942598 Jy ! Component: 400 - total flux cleaned = -0.000903171 Jy ! Component: 450 - total flux cleaned = -0.000903079 Jy ! Component: 500 - total flux cleaned = -0.00090243 Jy ! Component: 550 - total flux cleaned = -0.000902726 Jy ! Component: 600 - total flux cleaned = -0.000938406 Jy ! Component: 650 - total flux cleaned = -0.0011115 Jy ! Component: 700 - total flux cleaned = -0.00127835 Jy ! Component: 750 - total flux cleaned = -0.00124569 Jy ! Component: 800 - total flux cleaned = -0.00130992 Jy ! Component: 850 - total flux cleaned = -0.0012791 Jy ! Component: 900 - total flux cleaned = -0.00140132 Jy ! Component: 950 - total flux cleaned = -0.00155046 Jy ! Component: 1000 - total flux cleaned = -0.0016667 Jy ! Component: 1050 - total flux cleaned = -0.00183723 Jy ! Component: 1100 - total flux cleaned = -0.00197607 Jy ! Component: 1150 - total flux cleaned = -0.00211242 Jy ! Component: 1200 - total flux cleaned = -0.00221942 Jy ! Component: 1250 - total flux cleaned = -0.00240336 Jy ! Component: 1300 - total flux cleaned = -0.00248097 Jy ! Component: 1350 - total flux cleaned = -0.00258231 Jy ! Component: 1400 - total flux cleaned = -0.00263172 Jy ! Component: 1450 - total flux cleaned = -0.00260707 Jy ! Component: 1500 - total flux cleaned = -0.00260716 Jy ! Component: 1550 - total flux cleaned = -0.00253605 Jy ! Component: 1600 - total flux cleaned = -0.00253635 Jy ! Component: 1650 - total flux cleaned = -0.00246758 Jy ! Component: 1700 - total flux cleaned = -0.00244568 Jy ! Component: 1750 - total flux cleaned = -0.00244586 Jy ! Component: 1800 - total flux cleaned = -0.00244567 Jy ! Component: 1850 - total flux cleaned = -0.00242374 Jy ! Component: 1900 - total flux cleaned = -0.00242365 Jy ! Component: 1950 - total flux cleaned = -0.00244472 Jy ! Component: 2000 - total flux cleaned = -0.00238228 Jy ! Component: 2050 - total flux cleaned = -0.0023827 Jy ! Component: 2100 - total flux cleaned = -0.00246411 Jy ! Component: 2150 - total flux cleaned = -0.002464 Jy ! Component: 2200 - total flux cleaned = -0.00252321 Jy ! Component: 2250 - total flux cleaned = -0.00248395 Jy ! Component: 2300 - total flux cleaned = -0.00252313 Jy ! Component: 2350 - total flux cleaned = -0.00259967 Jy ! Component: 2400 - total flux cleaned = -0.00258074 Jy ! Component: 2450 - total flux cleaned = -0.00265545 Jy ! Component: 2500 - total flux cleaned = -0.00265537 Jy ! Component: 2550 - total flux cleaned = -0.00269178 Jy ! Component: 2600 - total flux cleaned = -0.00270964 Jy ! Component: 2650 - total flux cleaned = -0.00276314 Jy ! Component: 2700 - total flux cleaned = -0.00281616 Jy ! Component: 2750 - total flux cleaned = -0.00285099 Jy ! Component: 2800 - total flux cleaned = -0.00285105 Jy ! Component: 2850 - total flux cleaned = -0.00290259 Jy ! Component: 2900 - total flux cleaned = -0.00291975 Jy ! Component: 2950 - total flux cleaned = -0.00298691 Jy ! Component: 3000 - total flux cleaned = -0.00298687 Jy ! Component: 3050 - total flux cleaned = -0.00302001 Jy ! Component: 3100 - total flux cleaned = -0.00316673 Jy ! Component: 3150 - total flux cleaned = -0.00311816 Jy ! Component: 3200 - total flux cleaned = -0.00313413 Jy ! Component: 3250 - total flux cleaned = -0.00316585 Jy ! Component: 3300 - total flux cleaned = -0.0032132 Jy ! Component: 3350 - total flux cleaned = -0.00326 Jy ! Component: 3400 - total flux cleaned = -0.00329096 Jy ! Component: 3450 - total flux cleaned = -0.00335233 Jy ! Component: 3500 - total flux cleaned = -0.00344354 Jy ! Component: 3550 - total flux cleaned = -0.00341332 Jy ! Component: 3600 - total flux cleaned = -0.00345821 Jy ! Component: 3650 - total flux cleaned = -0.00351751 Jy ! Component: 3700 - total flux cleaned = -0.00353188 Jy ! Component: 3750 - total flux cleaned = -0.00350245 Jy ! Component: 3800 - total flux cleaned = -0.00350249 Jy ! Component: 3850 - total flux cleaned = -0.00350262 Jy ! Component: 3900 - total flux cleaned = -0.00351679 Jy ! Component: 3950 - total flux cleaned = -0.00353098 Jy ! Component: 4000 - total flux cleaned = -0.0035447 Jy ! Component: 4050 - total flux cleaned = -0.00354452 Jy ! Total flux subtracted in 4096 components = -0.00353065 Jy ! Clean residual min=-0.000972 max=0.000690 Jy/beam ! Clean residual mean=0.000002 rms=0.000249 Jy/beam ! Combined flux in latest and established models = 0.101155 Jy keep ! Adding 301 model components to the UV plane model. ! The established model now contains 385 components and 0.101155 Jy ![Exited script file: muppet] wmap "J0804-1712_S_2017_08_12_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.098 x 8.085 at -4.437 degrees (North through East) ! Clean map min=-0.0021518 max=0.068845 Jy/beam ! Writing clean map to FITS file: J0804-1712_S_2017_08_12_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.0688447 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000250135 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -1.09 1.09 2.17999 4.35998 8.71996 17.4399 34.8799 69.7597 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0007 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.068 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.098 x 8.085 at -4.437 degrees (North through East) ! Clean map min=-0.0021518 max=0.068845 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J0804-1712_S_2017_08_12_pus_uvs.log closed on Fri May 10 14:55:29 2019