! Started logfile: J0802-3810_S_2017_09_26_pus_uvs.log on Sat May 11 12:58:33 2019 obs J0802-3810_S_2017_09_26_pus_uva.fits ! Reading UV FITS file: J0802-3810_S_2017_09_26_pus_uva.fits ! AN table 1: 147 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.29195 visibilities/baseline/integration-bin. ! *** This seems a bit low - see "help observe" on the binwid argument. ! Found source: J0802-3810 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 674 lines of history. ! ! Reading 6180 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J0802-3810_S_2017_09_26_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 662 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 662 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 588 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 871 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.970444Jy sigma=0.005934 ! Fit after self-cal, rms=0.917633Jy sigma=0.005648 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.627 mas, bmaj=28.34 mas, bpa=-32.43 degrees ! Estimated noise=3286.92 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0625802 Jy ! Component: 100 - total flux cleaned = 0.0788474 Jy ! Total flux subtracted in 100 components = 0.0788474 Jy ! Clean residual min=-0.008157 max=0.009875 Jy/beam ! Clean residual mean=0.000000 rms=0.002651 Jy/beam ! Combined flux in latest and established models = 0.0788474 Jy ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 15 components and 0.0788474 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.101445Jy sigma=0.000588 ! Fit after self-cal, rms=0.100805Jy sigma=0.000585 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.974 mas, bmaj=34.53 mas, bpa=-32.5 degrees ! Estimated noise=1738.65 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0119579 Jy ! Component: 100 - total flux cleaned = 0.0164318 Jy ! Component: 150 - total flux cleaned = 0.0179326 Jy ! Component: 200 - total flux cleaned = 0.0185697 Jy ! Total flux subtracted in 200 components = 0.0185697 Jy ! Clean residual min=-0.003105 max=0.003171 Jy/beam ! Clean residual mean=0.000011 rms=0.000818 Jy/beam ! Combined flux in latest and established models = 0.0974171 Jy ! Performing phase self-cal ! Adding 45 model components to the UV plane model. ! The established model now contains 57 components and 0.0974171 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.099491Jy sigma=0.000577 ! Fit after self-cal, rms=0.099446Jy sigma=0.000577 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 0.96 ! LA 1.05 MK 0.98 NL 1.00* OV 1.10 ! PT 1.09 ! ! ! Correcting IF 2. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 0.99 ! LA 0.98 MK 1.07 NL 1.00* OV 1.06 ! PT 0.97 ! ! ! Correcting IF 3. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 0.96 ! LA 1.03 MK 1.06 NL 0.95 OV 1.00 ! PT 0.93 ! ! ! Correcting IF 4. ! A total of 216 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.00* ! LA 0.90 MK 0.98 NL 1.00* OV 0.99 ! PT 0.89 ! ! ! Fit before self-cal, rms=0.099446Jy sigma=0.000577 ! Fit after self-cal, rms=0.097924Jy sigma=0.000577 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.948 mas, bmaj=34.49 mas, bpa=-32.43 degrees ! Estimated noise=1782.59 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000435113 Jy ! Component: 100 - total flux cleaned = 0.000493104 Jy ! Component: 150 - total flux cleaned = 0.000542034 Jy ! Component: 200 - total flux cleaned = 0.00049874 Jy ! Total flux subtracted in 200 components = 0.00049874 Jy ! Clean residual min=-0.001882 max=0.001966 Jy/beam ! Clean residual mean=0.000003 rms=0.000568 Jy/beam ! Combined flux in latest and established models = 0.0979159 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 73 components and 0.0979158 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.097858Jy sigma=0.000577 ! Fit after self-cal, rms=0.097882Jy sigma=0.000576 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.097882Jy sigma=0.000576 ! Fit after self-cal, rms=0.098071Jy sigma=0.000576 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.942 mas, bmaj=34.49 mas, bpa=-32.42 degrees ! Estimated noise=1784.99 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000272856 Jy ! Component: 100 - total flux cleaned = 0.000431453 Jy ! Component: 150 - total flux cleaned = 0.000478985 Jy ! Component: 200 - total flux cleaned = 0.000479734 Jy ! Total flux subtracted in 200 components = 0.000479734 Jy ! Clean residual min=-0.002045 max=0.001933 Jy/beam ! Clean residual mean=0.000002 rms=0.000568 Jy/beam ! Combined flux in latest and established models = 0.0983956 Jy selfcal ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 81 components and 0.0983956 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.098017Jy sigma=0.000576 ! Fit after self-cal, rms=0.097987Jy sigma=0.000576 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000422131 Jy ! Component: 100 - total flux cleaned = 0.000553221 Jy ! Component: 150 - total flux cleaned = 0.000475576 Jy ! Component: 200 - total flux cleaned = 0.000439791 Jy ! Total flux subtracted in 200 components = 0.000439791 Jy ! Clean residual min=-0.001881 max=0.001859 Jy/beam ! Clean residual mean=0.000005 rms=0.000551 Jy/beam ! Combined flux in latest and established models = 0.0988354 Jy ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 89 components and 0.0988354 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.097950Jy sigma=0.000576 ! Fit after self-cal, rms=0.097918Jy sigma=0.000575 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.097918Jy sigma=0.000575 ! Fit after self-cal, rms=0.097769Jy sigma=0.000575 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.918 mas, bmaj=34.41 mas, bpa=-32.43 degrees ! Estimated noise=1783.82 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000428167 Jy ! Component: 100 - total flux cleaned = 0.000541977 Jy ! Component: 150 - total flux cleaned = 0.000541417 Jy ! Component: 200 - total flux cleaned = 0.000478974 Jy ! Total flux subtracted in 200 components = 0.000478974 Jy ! Clean residual min=-0.001890 max=0.001626 Jy/beam ! Clean residual mean=0.000001 rms=0.000522 Jy/beam ! Combined flux in latest and established models = 0.0993143 Jy selfcal ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 95 components and 0.0993143 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.097741Jy sigma=0.000575 ! Fit after self-cal, rms=0.097713Jy sigma=0.000575 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -2.03172e-05 Jy ! Component: 100 - total flux cleaned = 0.000192208 Jy ! Component: 150 - total flux cleaned = 0.000194067 Jy ! Component: 200 - total flux cleaned = 0.000165648 Jy ! Total flux subtracted in 200 components = 0.000165648 Jy ! Clean residual min=-0.001736 max=0.001592 Jy/beam ! Clean residual mean=0.000002 rms=0.000514 Jy/beam ! Combined flux in latest and established models = 0.09948 Jy ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 101 components and 0.09948 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.097688Jy sigma=0.000575 ! Fit after self-cal, rms=0.097682Jy sigma=0.000575 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.097682Jy sigma=0.000575 ! Fit after self-cal, rms=0.097529Jy sigma=0.000575 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=11.44 mas, bmaj=52.37 mas, bpa=-19.11 degrees ! Estimated noise=2036.8 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000141001 Jy ! Component: 100 - total flux cleaned = 0.000115566 Jy ! Component: 150 - total flux cleaned = 6.77637e-05 Jy ! Component: 200 - total flux cleaned = 5.59974e-05 Jy ! Total flux subtracted in 200 components = 5.59974e-05 Jy ! Clean residual min=-0.001406 max=0.001243 Jy/beam ! Clean residual mean=-0.000001 rms=0.000413 Jy/beam ! Combined flux in latest and established models = 0.099536 Jy selfcal ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 110 components and 0.099536 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.097522Jy sigma=0.000575 ! Fit after self-cal, rms=0.097515Jy sigma=0.000575 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -1.96612e-06 Jy ! Component: 100 - total flux cleaned = -6.07992e-05 Jy ! Component: 150 - total flux cleaned = -7.14489e-05 Jy ! Component: 200 - total flux cleaned = -7.09531e-05 Jy ! Total flux subtracted in 200 components = -7.09531e-05 Jy ! Clean residual min=-0.001400 max=0.001242 Jy/beam ! Clean residual mean=-0.000001 rms=0.000412 Jy/beam ! Combined flux in latest and established models = 0.099465 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 118 components and 0.099465 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.097510Jy sigma=0.000575 ! Fit after self-cal, rms=0.097511Jy sigma=0.000575 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.9 mas, bmaj=34.36 mas, bpa=-32.44 degrees ! Estimated noise=1782.47 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.9 x 34.36 at -32.44 degrees (North through East) ! Clean map min=-0.0047476 max=0.070077 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.697 mas, bmaj=27.2 mas, bpa=-32.17 degrees ! Estimated noise=2838.71 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0608512 Jy ! Component: 100 - total flux cleaned = 0.0793391 Jy ! Component: 150 - total flux cleaned = 0.0866061 Jy ! Component: 200 - total flux cleaned = 0.0898433 Jy ! Total flux subtracted in 200 components = 0.0898433 Jy ! Clean residual min=-0.006274 max=0.005340 Jy/beam ! Clean residual mean=-0.000004 rms=0.001872 Jy/beam ! Combined flux in latest and established models = 0.0898433 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 35 model components to the UV plane model. ! The established model now contains 35 components and 0.0898433 Jy ! Inverting map and beam ! Estimated beam: bmin=3.9 mas, bmaj=34.36 mas, bpa=-32.44 degrees ! Estimated noise=1782.47 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0051167 Jy ! Component: 100 - total flux cleaned = 0.00713101 Jy ! Component: 150 - total flux cleaned = 0.00759505 Jy ! Component: 200 - total flux cleaned = 0.00793151 Jy ! Total flux subtracted in 200 components = 0.00793151 Jy ! Clean residual min=-0.002073 max=0.002146 Jy/beam ! Clean residual mean=-0.000005 rms=0.000604 Jy/beam ! Combined flux in latest and established models = 0.0977748 Jy ! Adding 45 model components to the UV plane model. ! The established model now contains 78 components and 0.0977748 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=11.44 mas, bmaj=52.37 mas, bpa=-19.11 degrees ! Estimated noise=2036.8 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000610738 Jy ! Component: 100 - total flux cleaned = 0.000659633 Jy ! Component: 150 - total flux cleaned = 0.000747084 Jy ! Component: 200 - total flux cleaned = 0.000824726 Jy ! Total flux subtracted in 200 components = 0.000824726 Jy ! Clean residual min=-0.001458 max=0.001121 Jy/beam ! Clean residual mean=-0.000005 rms=0.000393 Jy/beam ! Combined flux in latest and established models = 0.0985996 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 8.28242e-05 Jy ! Component: 100 - total flux cleaned = 0.000167855 Jy ! Component: 150 - total flux cleaned = 0.000207036 Jy ! Component: 200 - total flux cleaned = 0.000235419 Jy ! Total flux subtracted in 200 components = 0.000235419 Jy ! Clean residual min=-0.001404 max=0.001145 Jy/beam ! Clean residual mean=-0.000004 rms=0.000388 Jy/beam ! Combined flux in latest and established models = 0.098835 Jy ! Adding 22 model components to the UV plane model. ! The established model now contains 100 components and 0.098835 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.9 mas, bmaj=34.36 mas, bpa=-32.44 degrees ! Estimated noise=1782.47 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 8.06255e-05 Jy ! Component: 100 - total flux cleaned = 0.000160309 Jy ! Component: 150 - total flux cleaned = 0.000197517 Jy ! Component: 200 - total flux cleaned = 0.000263686 Jy ! Total flux subtracted in 200 components = 0.000263686 Jy ! Clean residual min=-0.002072 max=0.001841 Jy/beam ! Clean residual mean=-0.000002 rms=0.000524 Jy/beam ! Combined flux in latest and established models = 0.0990987 Jy selfcal ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 112 components and 0.0990987 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.097526Jy sigma=0.000575 ! Fit after self-cal, rms=0.097523Jy sigma=0.000575 wmodel J0802-3810_S_2017_09_26_pus_map.mod ! Writing 112 model components to file: J0802-3810_S_2017_09_26_pus_map.mod wobs J0802-3810_S_2017_09_26_pus_uvs.fits ! Writing UV FITS file: J0802-3810_S_2017_09_26_pus_uvs.fits wwins J0802-3810_S_2017_09_26_pus_map.win ! wwins: Wrote 1 windows to J0802-3810_S_2017_09_26_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000247025 Jy ! Component: 100 - total flux cleaned = -0.000127128 Jy ! Component: 150 - total flux cleaned = 1.67794e-05 Jy ! Component: 200 - total flux cleaned = 7.08359e-05 Jy ! Component: 250 - total flux cleaned = 0.000122443 Jy ! Component: 300 - total flux cleaned = 0.000272436 Jy ! Component: 350 - total flux cleaned = 0.000442332 Jy ! Component: 400 - total flux cleaned = 0.000582985 Jy ! Component: 450 - total flux cleaned = 0.000673965 Jy ! Component: 500 - total flux cleaned = 0.00073975 Jy ! Component: 550 - total flux cleaned = 0.000695898 Jy ! Component: 600 - total flux cleaned = 0.000674797 Jy ! Component: 650 - total flux cleaned = 0.000715387 Jy ! Component: 700 - total flux cleaned = 0.00065467 Jy ! Component: 750 - total flux cleaned = 0.000536146 Jy ! Component: 800 - total flux cleaned = 0.000593834 Jy ! Component: 850 - total flux cleaned = 0.000669372 Jy ! Component: 900 - total flux cleaned = 0.000780883 Jy ! Component: 950 - total flux cleaned = 0.000873044 Jy ! Component: 1000 - total flux cleaned = 0.000927934 Jy ! Component: 1050 - total flux cleaned = 0.0010373 Jy ! Component: 1100 - total flux cleaned = 0.00101916 Jy ! Component: 1150 - total flux cleaned = 0.0010192 Jy ! Component: 1200 - total flux cleaned = 0.00101904 Jy ! Component: 1250 - total flux cleaned = 0.00101903 Jy ! Component: 1300 - total flux cleaned = 0.00105511 Jy ! Component: 1350 - total flux cleaned = 0.00105522 Jy ! Component: 1400 - total flux cleaned = 0.00105509 Jy ! Component: 1450 - total flux cleaned = 0.00105502 Jy ! Component: 1500 - total flux cleaned = 0.00107316 Jy ! Component: 1550 - total flux cleaned = 0.00103681 Jy ! Component: 1600 - total flux cleaned = 0.00103689 Jy ! Component: 1650 - total flux cleaned = 0.00100058 Jy ! Component: 1700 - total flux cleaned = 0.0010006 Jy ! Component: 1750 - total flux cleaned = 0.000944996 Jy ! Component: 1800 - total flux cleaned = 0.000963397 Jy ! Component: 1850 - total flux cleaned = 0.000888099 Jy ! Component: 1900 - total flux cleaned = 0.000792509 Jy ! Component: 1950 - total flux cleaned = 0.000714821 Jy ! Component: 2000 - total flux cleaned = 0.000616131 Jy ! Component: 2050 - total flux cleaned = 0.000495455 Jy ! Component: 2100 - total flux cleaned = 0.000393235 Jy ! Component: 2150 - total flux cleaned = 0.000268769 Jy ! Component: 2200 - total flux cleaned = 0.000141761 Jy ! Component: 2250 - total flux cleaned = 3.39088e-05 Jy ! Component: 2300 - total flux cleaned = -5.42088e-05 Jy ! Component: 2350 - total flux cleaned = -0.00018886 Jy ! Component: 2400 - total flux cleaned = -0.000303601 Jy ! Component: 2450 - total flux cleaned = -0.000467967 Jy ! Component: 2500 - total flux cleaned = -0.000588896 Jy ! Component: 2550 - total flux cleaned = -0.000663247 Jy ! Component: 2600 - total flux cleaned = -0.000739947 Jy ! Component: 2650 - total flux cleaned = -0.000740046 Jy ! Component: 2700 - total flux cleaned = -0.000794107 Jy ! Component: 2750 - total flux cleaned = -0.000822659 Jy ! Component: 2800 - total flux cleaned = -0.000851761 Jy ! Component: 2850 - total flux cleaned = -0.000851098 Jy ! Component: 2900 - total flux cleaned = -0.000882172 Jy ! Component: 2950 - total flux cleaned = -0.000882829 Jy ! Component: 3000 - total flux cleaned = -0.00088306 Jy ! Component: 3050 - total flux cleaned = -0.000883492 Jy ! Component: 3100 - total flux cleaned = -0.000884036 Jy ! Component: 3150 - total flux cleaned = -0.000884758 Jy ! Component: 3200 - total flux cleaned = -0.00088531 Jy ! Component: 3250 - total flux cleaned = -0.000886208 Jy ! Component: 3300 - total flux cleaned = -0.000842178 Jy ! Component: 3350 - total flux cleaned = -0.000841504 Jy ! Component: 3400 - total flux cleaned = -0.000840197 Jy ! Component: 3450 - total flux cleaned = -0.000839756 Jy ! Component: 3500 - total flux cleaned = -0.000840549 Jy ! Component: 3550 - total flux cleaned = -0.000841957 Jy ! Component: 3600 - total flux cleaned = -0.00084221 Jy ! Component: 3650 - total flux cleaned = -0.000842762 Jy ! Component: 3700 - total flux cleaned = -0.000842963 Jy ! Component: 3750 - total flux cleaned = -0.00084345 Jy ! Component: 3800 - total flux cleaned = -0.000845414 Jy ! Component: 3850 - total flux cleaned = -0.000846579 Jy ! Component: 3900 - total flux cleaned = -0.000848295 Jy ! Component: 3950 - total flux cleaned = -0.000848563 Jy ! Component: 4000 - total flux cleaned = -0.000848468 Jy ! Component: 4050 - total flux cleaned = -0.00085033 Jy ! Total flux subtracted in 4096 components = -0.000851352 Jy ! Clean residual min=-0.005341 max=0.005179 Jy/beam ! Clean residual mean=-0.000019 rms=0.001408 Jy/beam ! Combined flux in latest and established models = 0.0982473 Jy keep ! Adding 171 model components to the UV plane model. ! The established model now contains 283 components and 0.0982473 Jy ![Exited script file: muppet] wmap "J0802-3810_S_2017_09_26_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.9 x 34.36 at -32.44 degrees (North through East) ! Clean map min=-0.0068014 max=0.065539 Jy/beam ! Writing clean map to FITS file: J0802-3810_S_2017_09_26_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.0655386 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.00154847 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -7.08807 7.08807 14.1761 28.3523 56.7045 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0046 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.065 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.9 x 34.36 at -32.44 degrees (North through East) ! Clean map min=-0.0068014 max=0.065539 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J0802-3810_S_2017_09_26_pus_uvs.log closed on Sat May 11 12:58:38 2019