! Started logfile: J0802+1809_S_2017_01_16_pus_uvs.log on Sun Apr 7 15:08:33 2019 obs J0802+1809_S_2017_01_16_pus_uva.fits ! Reading UV FITS file: J0802+1809_S_2017_01_16_pus_uva.fits ! AN table 1: 8 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.533333 visibilities/baseline/integration-bin. ! Found source: J0802+1809 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 622 lines of history. ! ! Reading 768 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J0802+1809_S_2017_01_16_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 21 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 21 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 21 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 37 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.664517Jy sigma=0.004348 ! Fit after self-cal, rms=0.660668Jy sigma=0.004323 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=6.716 mas, bmaj=10.93 mas, bpa=-7.807 degrees ! Estimated noise=4916.51 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.281691 Jy ! Component: 100 - total flux cleaned = 0.343221 Jy ! Total flux subtracted in 100 components = 0.343221 Jy ! Clean residual min=-0.021102 max=0.034294 Jy/beam ! Clean residual mean=-0.000031 rms=0.007148 Jy/beam ! Combined flux in latest and established models = 0.343221 Jy ! Performing phase self-cal ! Adding 6 model components to the UV plane model. ! The established model now contains 6 components and 0.343221 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.116882Jy sigma=0.000723 ! Fit after self-cal, rms=0.116865Jy sigma=0.000723 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=7.876 mas, bmaj=12.04 mas, bpa=-16.94 degrees ! Estimated noise=4172.33 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0062337 Jy ! Component: 100 - total flux cleaned = 0.00484405 Jy ! Component: 150 - total flux cleaned = 0.0038028 Jy ! Component: 200 - total flux cleaned = 0.00302113 Jy ! Total flux subtracted in 200 components = 0.00302113 Jy ! Clean residual min=-0.015445 max=0.027325 Jy/beam ! Clean residual mean=0.000071 rms=0.005951 Jy/beam ! Combined flux in latest and established models = 0.346242 Jy ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 31 components and 0.346242 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.115400Jy sigma=0.000708 ! Fit after self-cal, rms=0.115407Jy sigma=0.000708 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.02 FD 0.89 HN 0.97 KP 0.92 ! LA 1.00 MK 1.00* NL 0.86 OV 0.96 ! PT 1.25 SC 1.00* ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.04 FD 0.97 HN 1.03 KP 0.92 ! LA 0.95 MK 1.00* NL 0.96 OV 0.98 ! PT 1.32 SC 1.00* ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.01 FD 0.96 HN 1.01 KP 0.95 ! LA 1.00 MK 1.00* NL 0.99 OV 0.88 ! PT 1.27 SC 1.00* ! ! ! Correcting IF 4. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.03 FD 1.01 HN 0.96 KP 1.00* ! LA 1.08 MK 1.00* NL 1.00* OV 0.96 ! PT 1.28 SC 1.00* ! ! ! Fit before self-cal, rms=0.115407Jy sigma=0.000708 ! Fit after self-cal, rms=0.111777Jy sigma=0.000640 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=7.836 mas, bmaj=12.07 mas, bpa=-16.39 degrees ! Estimated noise=4145.07 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (108.5, -99.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00618057 Jy ! Component: 100 - total flux cleaned = 0.00594272 Jy ! Component: 150 - total flux cleaned = 0.0056188 Jy ! Component: 200 - total flux cleaned = 0.00546112 Jy ! Total flux subtracted in 200 components = 0.00546112 Jy ! Clean residual min=-0.005902 max=0.004979 Jy/beam ! Clean residual mean=-0.000001 rms=0.001663 Jy/beam ! Combined flux in latest and established models = 0.351703 Jy ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 59 components and 0.351703 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.110760Jy sigma=0.000632 ! Fit after self-cal, rms=0.111073Jy sigma=0.000632 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.111073Jy sigma=0.000632 ! Fit after self-cal, rms=0.110719Jy sigma=0.000632 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.831 mas, bmaj=12.07 mas, bpa=-16.31 degrees ! Estimated noise=4131.44 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000491578 Jy ! Component: 100 - total flux cleaned = 0.000484398 Jy ! Component: 150 - total flux cleaned = 0.000779865 Jy ! Component: 200 - total flux cleaned = 0.0012283 Jy ! Total flux subtracted in 200 components = 0.0012283 Jy ! Clean residual min=-0.005274 max=0.004761 Jy/beam ! Clean residual mean=0.000005 rms=0.001503 Jy/beam ! Combined flux in latest and established models = 0.352932 Jy selfcal ! Performing phase self-cal ! Adding 29 model components to the UV plane model. ! The established model now contains 83 components and 0.352932 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.110527Jy sigma=0.000630 ! Fit after self-cal, rms=0.110519Jy sigma=0.000630 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000254189 Jy ! Component: 100 - total flux cleaned = 0.000629474 Jy ! Component: 150 - total flux cleaned = 0.00083559 Jy ! Component: 200 - total flux cleaned = 0.00102678 Jy ! Total flux subtracted in 200 components = 0.00102678 Jy ! Clean residual min=-0.005165 max=0.004597 Jy/beam ! Clean residual mean=0.000006 rms=0.001443 Jy/beam ! Combined flux in latest and established models = 0.353958 Jy ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 92 components and 0.353958 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.110430Jy sigma=0.000629 ! Fit after self-cal, rms=0.110428Jy sigma=0.000629 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.110428Jy sigma=0.000629 ! Fit after self-cal, rms=0.110674Jy sigma=0.000629 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.823 mas, bmaj=12.07 mas, bpa=-16.22 degrees ! Estimated noise=4134.1 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000421117 Jy ! Component: 100 - total flux cleaned = 0.000736813 Jy ! Component: 150 - total flux cleaned = 0.000965651 Jy ! Component: 200 - total flux cleaned = 0.00117753 Jy ! Total flux subtracted in 200 components = 0.00117753 Jy ! Clean residual min=-0.005126 max=0.004610 Jy/beam ! Clean residual mean=0.000006 rms=0.001400 Jy/beam ! Combined flux in latest and established models = 0.355136 Jy selfcal ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 102 components and 0.355136 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.110613Jy sigma=0.000629 ! Fit after self-cal, rms=0.110618Jy sigma=0.000629 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 4.12537e-05 Jy ! Component: 100 - total flux cleaned = 0.000134398 Jy ! Component: 150 - total flux cleaned = 0.000267042 Jy ! Component: 200 - total flux cleaned = 0.000394911 Jy ! Total flux subtracted in 200 components = 0.000394911 Jy ! Clean residual min=-0.005066 max=0.004529 Jy/beam ! Clean residual mean=0.000006 rms=0.001377 Jy/beam ! Combined flux in latest and established models = 0.355531 Jy ! Performing phase self-cal ! Adding 35 model components to the UV plane model. ! The established model now contains 121 components and 0.355531 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.110582Jy sigma=0.000629 ! Fit after self-cal, rms=0.110580Jy sigma=0.000629 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.110580Jy sigma=0.000629 ! Fit after self-cal, rms=0.110803Jy sigma=0.000629 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=9.472 mas, bmaj=13.46 mas, bpa=-24.77 degrees ! Estimated noise=4369.14 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00106106 Jy ! Component: 100 - total flux cleaned = 0.00151376 Jy ! Component: 150 - total flux cleaned = 0.0017198 Jy ! Component: 200 - total flux cleaned = 0.0017967 Jy ! Total flux subtracted in 200 components = 0.0017967 Jy ! Clean residual min=-0.005280 max=0.004580 Jy/beam ! Clean residual mean=0.000002 rms=0.001444 Jy/beam ! Combined flux in latest and established models = 0.357327 Jy selfcal ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 136 components and 0.357327 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.110771Jy sigma=0.000628 ! Fit after self-cal, rms=0.110780Jy sigma=0.000628 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000161947 Jy ! Component: 100 - total flux cleaned = 0.000308481 Jy ! Component: 150 - total flux cleaned = 0.00041424 Jy ! Component: 200 - total flux cleaned = 0.000481379 Jy ! Total flux subtracted in 200 components = 0.000481379 Jy ! Clean residual min=-0.005229 max=0.004530 Jy/beam ! Clean residual mean=0.000002 rms=0.001424 Jy/beam ! Combined flux in latest and established models = 0.357809 Jy ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 141 components and 0.357809 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.110761Jy sigma=0.000628 ! Fit after self-cal, rms=0.110760Jy sigma=0.000628 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=7.815 mas, bmaj=12.07 mas, bpa=-16.15 degrees ! Estimated noise=4137.78 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 7.815 x 12.07 at -16.15 degrees (North through East) ! Clean map min=-0.0068826 max=0.35211 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=6.655 mas, bmaj=11.06 mas, bpa=-7.098 degrees ! Estimated noise=4846.36 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.277267 Jy ! Component: 100 - total flux cleaned = 0.33773 Jy ! Component: 150 - total flux cleaned = 0.351182 Jy ! Component: 200 - total flux cleaned = 0.354275 Jy ! Total flux subtracted in 200 components = 0.354275 Jy ! Clean residual min=-0.010199 max=0.008940 Jy/beam ! Clean residual mean=0.000009 rms=0.002646 Jy/beam ! Combined flux in latest and established models = 0.354275 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 13 model components to the UV plane model. ! The established model now contains 13 components and 0.354275 Jy ! Inverting map and beam ! Estimated beam: bmin=7.815 mas, bmaj=12.07 mas, bpa=-16.15 degrees ! Estimated noise=4137.78 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000345715 Jy ! Component: 100 - total flux cleaned = -8.03751e-05 Jy ! Component: 150 - total flux cleaned = 7.74655e-05 Jy ! Component: 200 - total flux cleaned = 0.000657779 Jy ! Total flux subtracted in 200 components = 0.000657779 Jy ! Clean residual min=-0.006255 max=0.005273 Jy/beam ! Clean residual mean=0.000005 rms=0.001669 Jy/beam ! Combined flux in latest and established models = 0.354933 Jy ! Adding 36 model components to the UV plane model. ! The established model now contains 46 components and 0.354933 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=9.472 mas, bmaj=13.46 mas, bpa=-24.77 degrees ! Estimated noise=4369.14 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000796902 Jy ! Component: 100 - total flux cleaned = 0.0012813 Jy ! Component: 150 - total flux cleaned = 0.00154535 Jy ! Component: 200 - total flux cleaned = 0.00171173 Jy ! Total flux subtracted in 200 components = 0.00171173 Jy ! Clean residual min=-0.005516 max=0.004851 Jy/beam ! Clean residual mean=0.000003 rms=0.001593 Jy/beam ! Combined flux in latest and established models = 0.356644 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000235607 Jy ! Component: 100 - total flux cleaned = 0.000454203 Jy ! Component: 150 - total flux cleaned = 0.000657587 Jy ! Component: 200 - total flux cleaned = 0.000846956 Jy ! Total flux subtracted in 200 components = 0.000846956 Jy ! Clean residual min=-0.005372 max=0.004707 Jy/beam ! Clean residual mean=0.000004 rms=0.001527 Jy/beam ! Combined flux in latest and established models = 0.357491 Jy ! Adding 42 model components to the UV plane model. ! The established model now contains 82 components and 0.357491 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=7.815 mas, bmaj=12.07 mas, bpa=-16.15 degrees ! Estimated noise=4137.78 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000248102 Jy ! Component: 100 - total flux cleaned = -0.00059622 Jy ! Component: 150 - total flux cleaned = -0.00072649 Jy ! Component: 200 - total flux cleaned = -0.000666259 Jy ! Total flux subtracted in 200 components = -0.000666259 Jy ! Clean residual min=-0.005104 max=0.004823 Jy/beam ! Clean residual mean=0.000007 rms=0.001408 Jy/beam ! Combined flux in latest and established models = 0.356825 Jy selfcal ! Performing phase self-cal ! Adding 29 model components to the UV plane model. ! The established model now contains 100 components and 0.356825 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.110832Jy sigma=0.000629 ! Fit after self-cal, rms=0.110833Jy sigma=0.000629 wmodel J0802+1809_S_2017_01_16_pus_map.mod ! Writing 100 model components to file: J0802+1809_S_2017_01_16_pus_map.mod wobs J0802+1809_S_2017_01_16_pus_uvs.fits ! Writing UV FITS file: J0802+1809_S_2017_01_16_pus_uvs.fits wwins J0802+1809_S_2017_01_16_pus_map.win ! wwins: Wrote 2 windows to J0802+1809_S_2017_01_16_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.00130852 Jy ! Component: 100 - total flux cleaned = -0.00211069 Jy ! Component: 150 - total flux cleaned = -0.00262596 Jy ! Component: 200 - total flux cleaned = -0.00324871 Jy ! Component: 250 - total flux cleaned = -0.00318135 Jy ! Component: 300 - total flux cleaned = -0.00311808 Jy ! Component: 350 - total flux cleaned = -0.00299743 Jy ! Component: 400 - total flux cleaned = -0.00305555 Jy ! Component: 450 - total flux cleaned = -0.00305604 Jy ! Component: 500 - total flux cleaned = -0.00300148 Jy ! Component: 550 - total flux cleaned = -0.00273881 Jy ! Component: 600 - total flux cleaned = -0.00258609 Jy ! Component: 650 - total flux cleaned = -0.00253557 Jy ! Component: 700 - total flux cleaned = -0.00253578 Jy ! Component: 750 - total flux cleaned = -0.00268001 Jy ! Component: 800 - total flux cleaned = -0.00282078 Jy ! Component: 850 - total flux cleaned = -0.00295882 Jy ! Component: 900 - total flux cleaned = -0.00309432 Jy ! Component: 950 - total flux cleaned = -0.00327202 Jy ! Component: 1000 - total flux cleaned = -0.00344572 Jy ! Component: 1050 - total flux cleaned = -0.00370309 Jy ! Component: 1100 - total flux cleaned = -0.00383102 Jy ! Component: 1150 - total flux cleaned = -0.00403947 Jy ! Component: 1200 - total flux cleaned = -0.00416257 Jy ! Component: 1250 - total flux cleaned = -0.00436564 Jy ! Component: 1300 - total flux cleaned = -0.00444507 Jy ! Component: 1350 - total flux cleaned = -0.00456377 Jy ! Component: 1400 - total flux cleaned = -0.00464266 Jy ! Component: 1450 - total flux cleaned = -0.00483681 Jy ! Component: 1500 - total flux cleaned = -0.00495203 Jy ! Component: 1550 - total flux cleaned = -0.00506642 Jy ! Component: 1600 - total flux cleaned = -0.00521726 Jy ! Component: 1650 - total flux cleaned = -0.00525472 Jy ! Component: 1700 - total flux cleaned = -0.00536634 Jy ! Component: 1750 - total flux cleaned = -0.00540325 Jy ! Component: 1800 - total flux cleaned = -0.00544027 Jy ! Component: 1850 - total flux cleaned = -0.00540386 Jy ! Component: 1900 - total flux cleaned = -0.00551353 Jy ! Component: 1950 - total flux cleaned = -0.00547707 Jy ! Component: 2000 - total flux cleaned = -0.00540437 Jy ! Component: 2050 - total flux cleaned = -0.00544057 Jy ! Component: 2100 - total flux cleaned = -0.00551288 Jy ! Component: 2150 - total flux cleaned = -0.00551268 Jy ! Component: 2200 - total flux cleaned = -0.00547665 Jy ! Component: 2250 - total flux cleaned = -0.00551311 Jy ! Component: 2300 - total flux cleaned = -0.00544071 Jy ! Component: 2350 - total flux cleaned = -0.00547742 Jy ! Component: 2400 - total flux cleaned = -0.0054408 Jy ! Component: 2450 - total flux cleaned = -0.00544093 Jy ! Component: 2500 - total flux cleaned = -0.00544118 Jy ! Component: 2550 - total flux cleaned = -0.0054413 Jy ! Component: 2600 - total flux cleaned = -0.00544104 Jy ! Component: 2650 - total flux cleaned = -0.00540424 Jy ! Component: 2700 - total flux cleaned = -0.00536707 Jy ! Component: 2750 - total flux cleaned = -0.00532961 Jy ! Component: 2800 - total flux cleaned = -0.00529226 Jy ! Component: 2850 - total flux cleaned = -0.00525464 Jy ! Component: 2900 - total flux cleaned = -0.005141 Jy ! Component: 2950 - total flux cleaned = -0.00529308 Jy ! Component: 3000 - total flux cleaned = -0.00536983 Jy ! Component: 3050 - total flux cleaned = -0.00540813 Jy ! Component: 3100 - total flux cleaned = -0.00556235 Jy ! Component: 3150 - total flux cleaned = -0.00548484 Jy ! Component: 3200 - total flux cleaned = -0.00560198 Jy ! Component: 3250 - total flux cleaned = -0.00564142 Jy ! Component: 3300 - total flux cleaned = -0.0055621 Jy ! Component: 3350 - total flux cleaned = -0.00564213 Jy ! Component: 3400 - total flux cleaned = -0.00556164 Jy ! Component: 3450 - total flux cleaned = -0.00560217 Jy ! Component: 3500 - total flux cleaned = -0.00552057 Jy ! Component: 3550 - total flux cleaned = -0.00556232 Jy ! Component: 3600 - total flux cleaned = -0.00552127 Jy ! Component: 3650 - total flux cleaned = -0.00543729 Jy ! Component: 3700 - total flux cleaned = -0.00539478 Jy ! Component: 3750 - total flux cleaned = -0.00530882 Jy ! Component: 3800 - total flux cleaned = -0.00530853 Jy ! Component: 3850 - total flux cleaned = -0.00526534 Jy ! Component: 3900 - total flux cleaned = -0.00522131 Jy ! Component: 3950 - total flux cleaned = -0.00513176 Jy ! Component: 4000 - total flux cleaned = -0.00517729 Jy ! Component: 4050 - total flux cleaned = -0.00504037 Jy ! Total flux subtracted in 4096 components = -0.00494797 Jy ! Clean residual min=-0.002572 max=0.002590 Jy/beam ! Clean residual mean=-0.000001 rms=0.000751 Jy/beam ! Combined flux in latest and established models = 0.351877 Jy keep ! Adding 279 model components to the UV plane model. ! The established model now contains 379 components and 0.351877 Jy ![Exited script file: muppet] wmap "J0802+1809_S_2017_01_16_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 7.815 x 12.07 at -16.15 degrees (North through East) ! Clean map min=-0.0079989 max=0.35099 Jy/beam ! Writing clean map to FITS file: J0802+1809_S_2017_01_16_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.35099 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000716474 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.612389 0.612389 1.22478 2.44955 4.89911 9.79822 19.5964 39.1929 78.3857 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0021 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.35 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 7.815 x 12.07 at -16.15 degrees (North through East) ! Clean map min=-0.0079989 max=0.35099 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J0802+1809_S_2017_01_16_pus_uvs.log closed on Sun Apr 7 15:08:38 2019