! Started logfile: J0801-3336_S_2017_03_27_pus_uvs.log on Sun Apr 28 14:35:54 2019 obs J0801-3336_S_2017_03_27_pus_uva.fits ! Reading UV FITS file: J0801-3336_S_2017_03_27_pus_uva.fits ! AN table 1: 97 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.502176 visibilities/baseline/integration-bin. ! Found source: J0801-3336 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 1684 lines of history. ! ! Reading 8768 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J0801-3336_S_2017_03_27_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 471 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 442 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 445 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 578 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.968651Jy sigma=0.006011 ! Fit after self-cal, rms=0.915795Jy sigma=0.005689 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.623 mas, bmaj=8.417 mas, bpa=0.9 degrees ! Estimated noise=4154.16 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0735498 Jy ! Component: 100 - total flux cleaned = 0.0991197 Jy ! Total flux subtracted in 100 components = 0.0991197 Jy ! Clean residual min=-0.012171 max=0.017426 Jy/beam ! Clean residual mean=-0.000047 rms=0.003730 Jy/beam ! Combined flux in latest and established models = 0.0991197 Jy ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 25 components and 0.0991197 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.122638Jy sigma=0.000671 ! Fit after self-cal, rms=0.122018Jy sigma=0.000668 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.54 mas, bmaj=10.16 mas, bpa=1.375 degrees ! Estimated noise=1455.8 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (3, 0). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.013644 Jy ! Component: 100 - total flux cleaned = 0.0202624 Jy ! Component: 150 - total flux cleaned = 0.0237814 Jy ! Component: 200 - total flux cleaned = 0.0243121 Jy ! Total flux subtracted in 200 components = 0.0243121 Jy ! Clean residual min=-0.005073 max=0.005193 Jy/beam ! Clean residual mean=-0.000055 rms=0.001271 Jy/beam ! Combined flux in latest and established models = 0.123432 Jy ! Performing phase self-cal ! Adding 38 model components to the UV plane model. ! The established model now contains 63 components and 0.123432 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.120590Jy sigma=0.000658 ! Fit after self-cal, rms=0.120436Jy sigma=0.000656 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! A total of 30 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 1.02 HN 1.23 KP 1.01 ! LA 1.01 MK 1.12 NL 0.85 OV 1.08 ! PT 0.98 SC 0.87 ! ! ! Correcting IF 2. ! A total of 6 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 1.06 HN 1.45 KP 1.01 ! LA 0.97 MK 1.22 NL 1.10 OV 1.05 ! PT 0.94 SC 0.91 ! ! ! Correcting IF 3. ! A total of 24 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.88 FD 1.01 HN 1.33 KP 1.03 ! LA 0.97 MK 1.04 NL 1.07 OV 1.06 ! PT 0.89 SC 1.09 ! ! ! Correcting IF 4. ! A total of 12 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 1.09 HN 1.13 KP 1.00* ! LA 0.89 MK 0.87 NL 1.00* OV 0.71 ! PT 0.96 SC 0.91 ! ! ! Fit before self-cal, rms=0.120436Jy sigma=0.000656 ! Fit after self-cal, rms=0.127365Jy sigma=0.000652 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.603 mas, bmaj=10.11 mas, bpa=2.354 degrees ! Estimated noise=1490.72 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000715121 Jy ! Component: 100 - total flux cleaned = 0.000564088 Jy ! Component: 150 - total flux cleaned = 0.000306702 Jy ! Component: 200 - total flux cleaned = 0.000200974 Jy ! Total flux subtracted in 200 components = 0.000200974 Jy ! Clean residual min=-0.003674 max=0.003380 Jy/beam ! Clean residual mean=0.000004 rms=0.000889 Jy/beam ! Combined flux in latest and established models = 0.123633 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 74 components and 0.123633 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.127275Jy sigma=0.000652 ! Fit after self-cal, rms=0.127419Jy sigma=0.000651 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.127419Jy sigma=0.000651 ! Fit after self-cal, rms=0.130026Jy sigma=0.000650 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.567 mas, bmaj=9.993 mas, bpa=2.023 degrees ! Estimated noise=1485.67 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000393826 Jy ! Component: 100 - total flux cleaned = 0.000495271 Jy ! Component: 150 - total flux cleaned = 0.000498002 Jy ! Component: 200 - total flux cleaned = 0.000498595 Jy ! Total flux subtracted in 200 components = 0.000498595 Jy ! Clean residual min=-0.003511 max=0.003235 Jy/beam ! Clean residual mean=-0.000003 rms=0.000881 Jy/beam ! Combined flux in latest and established models = 0.124131 Jy selfcal ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 83 components and 0.124131 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.129989Jy sigma=0.000650 ! Fit after self-cal, rms=0.129989Jy sigma=0.000650 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000139762 Jy ! Component: 100 - total flux cleaned = 5.50662e-05 Jy ! Component: 150 - total flux cleaned = 1.67201e-05 Jy ! Component: 200 - total flux cleaned = 1.70347e-05 Jy ! Total flux subtracted in 200 components = 1.70347e-05 Jy ! Clean residual min=-0.003532 max=0.003317 Jy/beam ! Clean residual mean=-0.000002 rms=0.000890 Jy/beam ! Combined flux in latest and established models = 0.124148 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 89 components and 0.124148 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.129959Jy sigma=0.000649 ! Fit after self-cal, rms=0.129912Jy sigma=0.000649 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.129912Jy sigma=0.000649 ! Fit after self-cal, rms=0.130095Jy sigma=0.000648 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.532 mas, bmaj=9.913 mas, bpa=1.694 degrees ! Estimated noise=1470.15 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000104842 Jy ! Component: 100 - total flux cleaned = -0.000216937 Jy ! Component: 150 - total flux cleaned = -0.000350754 Jy ! Component: 200 - total flux cleaned = -0.000444548 Jy ! Total flux subtracted in 200 components = -0.000444548 Jy ! Clean residual min=-0.003614 max=0.003251 Jy/beam ! Clean residual mean=-0.000012 rms=0.000871 Jy/beam ! Combined flux in latest and established models = 0.123704 Jy selfcal ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 96 components and 0.123704 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.130073Jy sigma=0.000648 ! Fit after self-cal, rms=0.130093Jy sigma=0.000648 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 2.01733e-05 Jy ! Component: 100 - total flux cleaned = -0.000117038 Jy ! Component: 150 - total flux cleaned = -0.000179309 Jy ! Component: 200 - total flux cleaned = -0.000238469 Jy ! Total flux subtracted in 200 components = -0.000238469 Jy ! Clean residual min=-0.003616 max=0.003273 Jy/beam ! Clean residual mean=-0.000012 rms=0.000873 Jy/beam ! Combined flux in latest and established models = 0.123465 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 99 components and 0.123465 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.130076Jy sigma=0.000648 ! Fit after self-cal, rms=0.130053Jy sigma=0.000648 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.130053Jy sigma=0.000648 ! Fit after self-cal, rms=0.130186Jy sigma=0.000648 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=9.119 mas, bmaj=29.99 mas, bpa=9.878 degrees ! Estimated noise=1675.63 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00056916 Jy ! Component: 100 - total flux cleaned = -0.000552944 Jy ! Component: 150 - total flux cleaned = -0.000552578 Jy ! Component: 200 - total flux cleaned = -0.000536985 Jy ! Total flux subtracted in 200 components = -0.000536985 Jy ! Clean residual min=-0.004135 max=0.003177 Jy/beam ! Clean residual mean=-0.000024 rms=0.000938 Jy/beam ! Combined flux in latest and established models = 0.122928 Jy selfcal ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 117 components and 0.122928 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.130184Jy sigma=0.000648 ! Fit after self-cal, rms=0.130207Jy sigma=0.000648 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000124923 Jy ! Component: 100 - total flux cleaned = -0.000109649 Jy ! Component: 150 - total flux cleaned = -0.000109118 Jy ! Component: 200 - total flux cleaned = -0.000108701 Jy ! Total flux subtracted in 200 components = -0.000108701 Jy ! Clean residual min=-0.004161 max=0.003183 Jy/beam ! Clean residual mean=-0.000024 rms=0.000939 Jy/beam ! Combined flux in latest and established models = 0.12282 Jy ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 120 components and 0.12282 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.130205Jy sigma=0.000648 ! Fit after self-cal, rms=0.130201Jy sigma=0.000648 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.514 mas, bmaj=9.86 mas, bpa=1.571 degrees ! Estimated noise=1461.17 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.514 x 9.86 at 1.571 degrees (North through East) ! Clean map min=-0.0036118 max=0.087145 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.64 mas, bmaj=8.462 mas, bpa=1.047 degrees ! Estimated noise=3841.75 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0670063 Jy ! Component: 100 - total flux cleaned = 0.0917156 Jy ! Component: 150 - total flux cleaned = 0.104882 Jy ! Component: 200 - total flux cleaned = 0.113135 Jy ! Total flux subtracted in 200 components = 0.113135 Jy ! Clean residual min=-0.009794 max=0.008921 Jy/beam ! Clean residual mean=-0.000021 rms=0.002460 Jy/beam ! Combined flux in latest and established models = 0.113135 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 41 model components to the UV plane model. ! The established model now contains 41 components and 0.113135 Jy ! Inverting map and beam ! Estimated beam: bmin=3.514 mas, bmaj=9.86 mas, bpa=1.571 degrees ! Estimated noise=1461.17 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-3.5, 2.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00775874 Jy ! Component: 100 - total flux cleaned = 0.0111772 Jy ! Component: 150 - total flux cleaned = 0.0118883 Jy ! Component: 200 - total flux cleaned = 0.0119879 Jy ! Total flux subtracted in 200 components = 0.0119879 Jy ! Clean residual min=-0.005066 max=0.003467 Jy/beam ! Clean residual mean=0.000005 rms=0.001045 Jy/beam ! Combined flux in latest and established models = 0.125123 Jy ! Adding 35 model components to the UV plane model. ! The established model now contains 76 components and 0.125123 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=9.119 mas, bmaj=29.99 mas, bpa=9.878 degrees ! Estimated noise=1675.63 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00108134 Jy ! Component: 100 - total flux cleaned = -0.0010833 Jy ! Component: 150 - total flux cleaned = -0.00114069 Jy ! Component: 200 - total flux cleaned = -0.0011899 Jy ! Total flux subtracted in 200 components = -0.0011899 Jy ! Clean residual min=-0.003895 max=0.003254 Jy/beam ! Clean residual mean=-0.000006 rms=0.000998 Jy/beam ! Combined flux in latest and established models = 0.123933 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -6.53525e-07 Jy ! Component: 100 - total flux cleaned = -4.41235e-05 Jy ! Component: 150 - total flux cleaned = -8.32093e-05 Jy ! Component: 200 - total flux cleaned = -8.36712e-05 Jy ! Total flux subtracted in 200 components = -8.36712e-05 Jy ! Clean residual min=-0.003872 max=0.003276 Jy/beam ! Clean residual mean=-0.000007 rms=0.000975 Jy/beam ! Combined flux in latest and established models = 0.12385 Jy ! Adding 28 model components to the UV plane model. ! The established model now contains 100 components and 0.12385 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.514 mas, bmaj=9.86 mas, bpa=1.571 degrees ! Estimated noise=1461.17 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000482823 Jy ! Component: 100 - total flux cleaned = 0.000635313 Jy ! Component: 150 - total flux cleaned = 0.000704339 Jy ! Component: 200 - total flux cleaned = 0.000649539 Jy ! Total flux subtracted in 200 components = 0.000649539 Jy ! Clean residual min=-0.003878 max=0.003475 Jy/beam ! Clean residual mean=-0.000002 rms=0.000932 Jy/beam ! Combined flux in latest and established models = 0.124499 Jy selfcal ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 117 components and 0.124499 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.130284Jy sigma=0.000648 ! Fit after self-cal, rms=0.130208Jy sigma=0.000648 wmodel J0801-3336_S_2017_03_27_pus_map.mod ! Writing 117 model components to file: J0801-3336_S_2017_03_27_pus_map.mod wobs J0801-3336_S_2017_03_27_pus_uvs.fits ! Writing UV FITS file: J0801-3336_S_2017_03_27_pus_uvs.fits wwins J0801-3336_S_2017_03_27_pus_map.win ! wwins: Wrote 3 windows to J0801-3336_S_2017_03_27_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000657558 Jy ! Component: 100 - total flux cleaned = -0.00114049 Jy ! Component: 150 - total flux cleaned = -0.00136173 Jy ! Component: 200 - total flux cleaned = -0.00146489 Jy ! Component: 250 - total flux cleaned = -0.0014626 Jy ! Component: 300 - total flux cleaned = -0.00151073 Jy ! Component: 350 - total flux cleaned = -0.00164541 Jy ! Component: 400 - total flux cleaned = -0.00173164 Jy ! Component: 450 - total flux cleaned = -0.00181566 Jy ! Component: 500 - total flux cleaned = -0.00201943 Jy ! Component: 550 - total flux cleaned = -0.00225668 Jy ! Component: 600 - total flux cleaned = -0.00248819 Jy ! Component: 650 - total flux cleaned = -0.00278875 Jy ! Component: 700 - total flux cleaned = -0.00308108 Jy ! Component: 750 - total flux cleaned = -0.0032946 Jy ! Component: 800 - total flux cleaned = -0.00350374 Jy ! Component: 850 - total flux cleaned = -0.00364046 Jy ! Component: 900 - total flux cleaned = -0.0037073 Jy ! Component: 950 - total flux cleaned = -0.00380582 Jy ! Component: 1000 - total flux cleaned = -0.00393497 Jy ! Component: 1050 - total flux cleaned = -0.00403076 Jy ! Component: 1100 - total flux cleaned = -0.00415616 Jy ! Component: 1150 - total flux cleaned = -0.00427948 Jy ! Component: 1200 - total flux cleaned = -0.00434035 Jy ! Component: 1250 - total flux cleaned = -0.00446046 Jy ! Component: 1300 - total flux cleaned = -0.00437248 Jy ! Component: 1350 - total flux cleaned = -0.00443104 Jy ! Component: 1400 - total flux cleaned = -0.00440229 Jy ! Component: 1450 - total flux cleaned = -0.00440244 Jy ! Component: 1500 - total flux cleaned = -0.00434616 Jy ! Component: 1550 - total flux cleaned = -0.00426339 Jy ! Component: 1600 - total flux cleaned = -0.00429122 Jy ! Component: 1650 - total flux cleaned = -0.00426415 Jy ! Component: 1700 - total flux cleaned = -0.00423746 Jy ! Component: 1750 - total flux cleaned = -0.00415795 Jy ! Component: 1800 - total flux cleaned = -0.00413147 Jy ! Component: 1850 - total flux cleaned = -0.00402794 Jy ! Component: 1900 - total flux cleaned = -0.00397663 Jy ! Component: 1950 - total flux cleaned = -0.00390072 Jy ! Component: 2000 - total flux cleaned = -0.00387561 Jy ! Component: 2050 - total flux cleaned = -0.00380105 Jy ! Component: 2100 - total flux cleaned = -0.00372683 Jy ! Component: 2150 - total flux cleaned = -0.00362891 Jy ! Component: 2200 - total flux cleaned = -0.00358038 Jy ! Component: 2250 - total flux cleaned = -0.00341245 Jy ! Component: 2300 - total flux cleaned = -0.0033174 Jy ! Component: 2350 - total flux cleaned = -0.0032702 Jy ! Component: 2400 - total flux cleaned = -0.00312973 Jy ! Component: 2450 - total flux cleaned = -0.00303674 Jy ! Component: 2500 - total flux cleaned = -0.00292118 Jy ! Component: 2550 - total flux cleaned = -0.00280621 Jy ! Component: 2600 - total flux cleaned = -0.00266936 Jy ! Component: 2650 - total flux cleaned = -0.00255602 Jy ! Component: 2700 - total flux cleaned = -0.00239855 Jy ! Component: 2750 - total flux cleaned = -0.00228688 Jy ! Component: 2800 - total flux cleaned = -0.00204276 Jy ! Component: 2850 - total flux cleaned = -0.00195446 Jy ! Component: 2900 - total flux cleaned = -0.0018009 Jy ! Component: 2950 - total flux cleaned = -0.00160434 Jy ! Component: 3000 - total flux cleaned = -0.00147414 Jy ! Component: 3050 - total flux cleaned = -0.00130143 Jy ! Component: 3100 - total flux cleaned = -0.00119397 Jy ! Component: 3150 - total flux cleaned = -0.00106569 Jy ! Component: 3200 - total flux cleaned = -0.000959104 Jy ! Component: 3250 - total flux cleaned = -0.000768335 Jy ! Component: 3300 - total flux cleaned = -0.000641678 Jy ! Component: 3350 - total flux cleaned = -0.000515322 Jy ! Component: 3400 - total flux cleaned = -0.000326434 Jy ! Component: 3450 - total flux cleaned = -0.000200884 Jy ! Component: 3500 - total flux cleaned = -3.40834e-05 Jy ! Component: 3550 - total flux cleaned = 9.06219e-05 Jy ! Component: 3600 - total flux cleaned = 0.00023556 Jy ! Component: 3650 - total flux cleaned = 0.000380123 Jy ! Component: 3700 - total flux cleaned = 0.000524274 Jy ! Component: 3750 - total flux cleaned = 0.000688601 Jy ! Component: 3800 - total flux cleaned = 0.000811467 Jy ! Component: 3850 - total flux cleaned = 0.000995248 Jy ! Component: 3900 - total flux cleaned = 0.00109721 Jy ! Component: 3950 - total flux cleaned = 0.00134121 Jy ! Component: 4000 - total flux cleaned = 0.00146291 Jy ! Component: 4050 - total flux cleaned = 0.00156419 Jy ! Total flux subtracted in 4096 components = 0.00172596 Jy ! Clean residual min=-0.001269 max=0.001193 Jy/beam ! Clean residual mean=0.000001 rms=0.000357 Jy/beam ! Combined flux in latest and established models = 0.126225 Jy keep ! Adding 221 model components to the UV plane model. ! The established model now contains 338 components and 0.126225 Jy ![Exited script file: muppet] wmap "J0801-3336_S_2017_03_27_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.514 x 9.86 at 1.571 degrees (North through East) ! Clean map min=-0.0032793 max=0.082 Jy/beam ! Writing clean map to FITS file: J0801-3336_S_2017_03_27_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.0820004 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000349997 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -1.28047 1.28047 2.56094 5.12188 10.2438 20.4875 40.975 81.9501 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.001 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.082 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.514 x 9.86 at 1.571 degrees (North through East) ! Clean map min=-0.0032793 max=0.082 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J0801-3336_S_2017_03_27_pus_uvs.log closed on Sun Apr 28 14:35:59 2019