! Started logfile: J0801+1153_S_2017_09_26_pus_uvs.log on Sat May 11 12:58:21 2019 obs J0801+1153_S_2017_09_26_pus_uva.fits ! Reading UV FITS file: J0801+1153_S_2017_09_26_pus_uva.fits ! AN table 1: 295 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.674011 visibilities/baseline/integration-bin. ! Found source: J0801+1153 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 674 lines of history. ! ! Reading 28632 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J0801+1153_S_2017_09_26_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 454 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 602 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 589 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 1805 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.973188Jy sigma=0.008591 ! Fit after self-cal, rms=0.950108Jy sigma=0.008405 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.26 mas, bmaj=11.48 mas, bpa=-26.49 degrees ! Estimated noise=1143.4 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.039841 Jy ! Component: 100 - total flux cleaned = 0.0487045 Jy ! Total flux subtracted in 100 components = 0.0487045 Jy ! Clean residual min=-0.003735 max=0.003422 Jy/beam ! Clean residual mean=-0.000007 rms=0.000909 Jy/beam ! Combined flux in latest and established models = 0.0487045 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 10 components and 0.0487045 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.083372Jy sigma=0.000685 ! Fit after self-cal, rms=0.082963Jy sigma=0.000681 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=4.215 mas, bmaj=12.73 mas, bpa=-23.56 degrees ! Estimated noise=563.444 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00438752 Jy ! Component: 100 - total flux cleaned = 0.00483974 Jy ! Component: 150 - total flux cleaned = 0.00477511 Jy ! Component: 200 - total flux cleaned = 0.00465802 Jy ! Total flux subtracted in 200 components = 0.00465802 Jy ! Clean residual min=-0.002695 max=0.002396 Jy/beam ! Clean residual mean=-0.000006 rms=0.000792 Jy/beam ! Combined flux in latest and established models = 0.0533625 Jy ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 30 components and 0.0533625 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.082622Jy sigma=0.000679 ! Fit after self-cal, rms=0.082514Jy sigma=0.000678 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.87 FD 1.00* HN 1.04 KP 1.02 ! LA 0.90 MK 0.97 NL 0.99 OV 1.14 ! PT 1.08 ! ! ! Correcting IF 2. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.93 FD 1.00* HN 1.05 KP 0.98 ! LA 0.91 MK 0.96 NL 1.06 OV 1.09 ! PT 1.06 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.90 FD 1.00* HN 0.99 KP 0.96 ! LA 0.92 MK 1.15 NL 1.00 OV 1.01 ! PT 1.02 ! ! ! Correcting IF 4. ! A total of 102 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 0.87 KP 1.00* ! LA 0.90 MK 0.99 NL 1.00* OV 0.64 ! PT 0.94 ! ! ! Fit before self-cal, rms=0.082514Jy sigma=0.000678 ! Fit after self-cal, rms=0.077829Jy sigma=0.000677 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=4.275 mas, bmaj=12.48 mas, bpa=-23.14 degrees ! Estimated noise=556.763 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 5.36463e-05 Jy ! Component: 100 - total flux cleaned = -1.27382e-05 Jy ! Component: 150 - total flux cleaned = -9.65807e-05 Jy ! Component: 200 - total flux cleaned = -0.000142821 Jy ! Total flux subtracted in 200 components = -0.000142821 Jy ! Clean residual min=-0.001873 max=0.002564 Jy/beam ! Clean residual mean=-0.000001 rms=0.000644 Jy/beam ! Combined flux in latest and established models = 0.0532197 Jy ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 51 components and 0.0532197 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.077799Jy sigma=0.000677 ! Fit after self-cal, rms=0.077719Jy sigma=0.000676 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.077719Jy sigma=0.000676 ! Fit after self-cal, rms=0.076574Jy sigma=0.000675 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=4.276 mas, bmaj=12.41 mas, bpa=-23.49 degrees ! Estimated noise=558.183 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000124461 Jy ! Component: 100 - total flux cleaned = -9.22286e-05 Jy ! Component: 150 - total flux cleaned = -4.84501e-05 Jy ! Component: 200 - total flux cleaned = -2.16731e-05 Jy ! Total flux subtracted in 200 components = -2.16731e-05 Jy ! Clean residual min=-0.001746 max=0.002356 Jy/beam ! Clean residual mean=-0.000001 rms=0.000583 Jy/beam ! Combined flux in latest and established models = 0.053198 Jy selfcal ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 58 components and 0.053198 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.076570Jy sigma=0.000675 ! Fit after self-cal, rms=0.076582Jy sigma=0.000675 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00012264 Jy ! Component: 100 - total flux cleaned = -0.000122123 Jy ! Component: 150 - total flux cleaned = -0.000135457 Jy ! Component: 200 - total flux cleaned = -0.000135038 Jy ! Total flux subtracted in 200 components = -0.000135038 Jy ! Clean residual min=-0.001716 max=0.002320 Jy/beam ! Clean residual mean=-0.000001 rms=0.000580 Jy/beam ! Combined flux in latest and established models = 0.053063 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 59 components and 0.053063 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.076578Jy sigma=0.000675 ! Fit after self-cal, rms=0.076563Jy sigma=0.000675 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.076563Jy sigma=0.000675 ! Fit after self-cal, rms=0.076800Jy sigma=0.000675 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=4.273 mas, bmaj=12.39 mas, bpa=-23.54 degrees ! Estimated noise=560.322 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000111563 Jy ! Component: 100 - total flux cleaned = 0.000152479 Jy ! Component: 150 - total flux cleaned = 0.00019008 Jy ! Component: 200 - total flux cleaned = 0.000212801 Jy ! Total flux subtracted in 200 components = 0.000212801 Jy ! Clean residual min=-0.001729 max=0.002362 Jy/beam ! Clean residual mean=-0.000001 rms=0.000576 Jy/beam ! Combined flux in latest and established models = 0.0532758 Jy selfcal ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 64 components and 0.0532758 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.076796Jy sigma=0.000675 ! Fit after self-cal, rms=0.076818Jy sigma=0.000675 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 4.00502e-05 Jy ! Component: 100 - total flux cleaned = 2.88205e-05 Jy ! Component: 150 - total flux cleaned = 3.96625e-05 Jy ! Component: 200 - total flux cleaned = 3.97582e-05 Jy ! Total flux subtracted in 200 components = 3.97582e-05 Jy ! Clean residual min=-0.001723 max=0.002359 Jy/beam ! Clean residual mean=-0.000000 rms=0.000573 Jy/beam ! Combined flux in latest and established models = 0.0533156 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 66 components and 0.0533156 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.076815Jy sigma=0.000675 ! Fit after self-cal, rms=0.076813Jy sigma=0.000675 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.076813Jy sigma=0.000675 ! Fit after self-cal, rms=0.077057Jy sigma=0.000675 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.353 mas, bmaj=13.81 mas, bpa=-21.67 degrees ! Estimated noise=642.846 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 7.03233e-05 Jy ! Component: 100 - total flux cleaned = 8.29499e-05 Jy ! Component: 150 - total flux cleaned = 7.12252e-05 Jy ! Component: 200 - total flux cleaned = 6.02499e-05 Jy ! Total flux subtracted in 200 components = 6.02499e-05 Jy ! Clean residual min=-0.001855 max=0.002748 Jy/beam ! Clean residual mean=-0.000004 rms=0.000691 Jy/beam ! Combined flux in latest and established models = 0.0533758 Jy selfcal ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 76 components and 0.0533758 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.077057Jy sigma=0.000675 ! Fit after self-cal, rms=0.077066Jy sigma=0.000675 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -5.38538e-05 Jy ! Component: 100 - total flux cleaned = -7.54433e-05 Jy ! Component: 150 - total flux cleaned = -8.51553e-05 Jy ! Component: 200 - total flux cleaned = -8.49868e-05 Jy ! Total flux subtracted in 200 components = -8.49868e-05 Jy ! Clean residual min=-0.001867 max=0.002744 Jy/beam ! Clean residual mean=-0.000003 rms=0.000686 Jy/beam ! Combined flux in latest and established models = 0.0532908 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 79 components and 0.0532908 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.077066Jy sigma=0.000675 ! Fit after self-cal, rms=0.077067Jy sigma=0.000675 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=4.267 mas, bmaj=12.38 mas, bpa=-23.57 degrees ! Estimated noise=562.125 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.267 x 12.38 at -23.57 degrees (North through East) ! Clean map min=-0.0029762 max=0.051647 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.268 mas, bmaj=11.15 mas, bpa=-26.31 degrees ! Estimated noise=1135.16 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0400279 Jy ! Component: 100 - total flux cleaned = 0.0489345 Jy ! Component: 150 - total flux cleaned = 0.0504543 Jy ! Component: 200 - total flux cleaned = 0.0507942 Jy ! Total flux subtracted in 200 components = 0.0507942 Jy ! Clean residual min=-0.002876 max=0.002738 Jy/beam ! Clean residual mean=-0.000001 rms=0.000738 Jy/beam ! Combined flux in latest and established models = 0.0507942 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 23 model components to the UV plane model. ! The established model now contains 23 components and 0.0507942 Jy ! Inverting map and beam ! Estimated beam: bmin=4.267 mas, bmaj=12.38 mas, bpa=-23.57 degrees ! Estimated noise=562.125 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0019315 Jy ! Component: 100 - total flux cleaned = 0.00212095 Jy ! Component: 150 - total flux cleaned = 0.00216039 Jy ! Component: 200 - total flux cleaned = 0.0021601 Jy ! Total flux subtracted in 200 components = 0.0021601 Jy ! Clean residual min=-0.001884 max=0.002420 Jy/beam ! Clean residual mean=-0.000002 rms=0.000603 Jy/beam ! Combined flux in latest and established models = 0.0529543 Jy ! Adding 26 model components to the UV plane model. ! The established model now contains 43 components and 0.0529543 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.353 mas, bmaj=13.81 mas, bpa=-21.67 degrees ! Estimated noise=642.846 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000448192 Jy ! Component: 100 - total flux cleaned = 0.000448703 Jy ! Component: 150 - total flux cleaned = 0.000426499 Jy ! Component: 200 - total flux cleaned = 0.000426322 Jy ! Total flux subtracted in 200 components = 0.000426322 Jy ! Clean residual min=-0.001899 max=0.002676 Jy/beam ! Clean residual mean=-0.000004 rms=0.000703 Jy/beam ! Combined flux in latest and established models = 0.0533806 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -1.66018e-05 Jy ! Component: 100 - total flux cleaned = -1.67347e-05 Jy ! Component: 150 - total flux cleaned = -1.70581e-05 Jy ! Component: 200 - total flux cleaned = -2.94992e-05 Jy ! Total flux subtracted in 200 components = -2.94992e-05 Jy ! Clean residual min=-0.001875 max=0.002721 Jy/beam ! Clean residual mean=-0.000004 rms=0.000693 Jy/beam ! Combined flux in latest and established models = 0.0533511 Jy ! Adding 25 model components to the UV plane model. ! The established model now contains 57 components and 0.0533511 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=4.267 mas, bmaj=12.38 mas, bpa=-23.57 degrees ! Estimated noise=562.125 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000234783 Jy ! Component: 100 - total flux cleaned = -0.000236969 Jy ! Component: 150 - total flux cleaned = -0.000237225 Jy ! Component: 200 - total flux cleaned = -0.000210704 Jy ! Total flux subtracted in 200 components = -0.000210704 Jy ! Clean residual min=-0.001796 max=0.002350 Jy/beam ! Clean residual mean=-0.000002 rms=0.000575 Jy/beam ! Combined flux in latest and established models = 0.0531404 Jy selfcal ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 64 components and 0.0531404 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.077069Jy sigma=0.000675 ! Fit after self-cal, rms=0.077063Jy sigma=0.000675 wmodel J0801+1153_S_2017_09_26_pus_map.mod ! Writing 64 model components to file: J0801+1153_S_2017_09_26_pus_map.mod wobs J0801+1153_S_2017_09_26_pus_uvs.fits ! Writing UV FITS file: J0801+1153_S_2017_09_26_pus_uvs.fits wwins J0801+1153_S_2017_09_26_pus_map.win ! wwins: Wrote 1 windows to J0801+1153_S_2017_09_26_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.00106535 Jy ! Component: 100 - total flux cleaned = 0.00198515 Jy ! Component: 150 - total flux cleaned = 0.00281309 Jy ! Component: 200 - total flux cleaned = 0.00345084 Jy ! Component: 250 - total flux cleaned = 0.00395632 Jy ! Component: 300 - total flux cleaned = 0.0042718 Jy ! Component: 350 - total flux cleaned = 0.00454418 Jy ! Component: 400 - total flux cleaned = 0.0048726 Jy ! Component: 450 - total flux cleaned = 0.00500697 Jy ! Component: 500 - total flux cleaned = 0.00517778 Jy ! Component: 550 - total flux cleaned = 0.00527961 Jy ! Component: 600 - total flux cleaned = 0.00531882 Jy ! Component: 650 - total flux cleaned = 0.00526205 Jy ! Component: 700 - total flux cleaned = 0.00528161 Jy ! Component: 750 - total flux cleaned = 0.00533594 Jy ! Component: 800 - total flux cleaned = 0.00538857 Jy ! Component: 850 - total flux cleaned = 0.0054396 Jy ! Component: 900 - total flux cleaned = 0.00542335 Jy ! Component: 950 - total flux cleaned = 0.00542378 Jy ! Component: 1000 - total flux cleaned = 0.00547138 Jy ! Component: 1050 - total flux cleaned = 0.00548659 Jy ! Component: 1100 - total flux cleaned = 0.00548588 Jy ! Component: 1150 - total flux cleaned = 0.00547073 Jy ! Component: 1200 - total flux cleaned = 0.00547061 Jy ! Component: 1250 - total flux cleaned = 0.00545628 Jy ! Component: 1300 - total flux cleaned = 0.00547013 Jy ! Component: 1350 - total flux cleaned = 0.00545622 Jy ! Component: 1400 - total flux cleaned = 0.00540112 Jy ! Component: 1450 - total flux cleaned = 0.00538794 Jy ! Component: 1500 - total flux cleaned = 0.00538779 Jy ! Component: 1550 - total flux cleaned = 0.00537457 Jy ! Component: 1600 - total flux cleaned = 0.00536175 Jy ! Component: 1650 - total flux cleaned = 0.0054131 Jy ! Component: 1700 - total flux cleaned = 0.00546352 Jy ! Component: 1750 - total flux cleaned = 0.00551369 Jy ! Component: 1800 - total flux cleaned = 0.00560015 Jy ! Component: 1850 - total flux cleaned = 0.00563682 Jy ! Component: 1900 - total flux cleaned = 0.00572168 Jy ! Component: 1950 - total flux cleaned = 0.00584167 Jy ! Component: 2000 - total flux cleaned = 0.00590118 Jy ! Component: 2050 - total flux cleaned = 0.00598374 Jy ! Component: 2100 - total flux cleaned = 0.00607711 Jy ! Component: 2150 - total flux cleaned = 0.00614639 Jy ! Component: 2200 - total flux cleaned = 0.00619225 Jy ! Component: 2250 - total flux cleaned = 0.00624905 Jy ! Component: 2300 - total flux cleaned = 0.00630538 Jy ! Component: 2350 - total flux cleaned = 0.00638371 Jy ! Component: 2400 - total flux cleaned = 0.00643917 Jy ! Component: 2450 - total flux cleaned = 0.00648317 Jy ! Component: 2500 - total flux cleaned = 0.00652693 Jy ! Component: 2550 - total flux cleaned = 0.00659216 Jy ! Component: 2600 - total flux cleaned = 0.0066461 Jy ! Component: 2650 - total flux cleaned = 0.00671038 Jy ! Component: 2700 - total flux cleaned = 0.00673173 Jy ! Component: 2750 - total flux cleaned = 0.0067953 Jy ! Component: 2800 - total flux cleaned = 0.00684806 Jy ! Component: 2850 - total flux cleaned = 0.0069109 Jy ! Component: 2900 - total flux cleaned = 0.00695262 Jy ! Component: 2950 - total flux cleaned = 0.00699408 Jy ! Component: 3000 - total flux cleaned = 0.00703532 Jy ! Component: 3050 - total flux cleaned = 0.00707635 Jy ! Component: 3100 - total flux cleaned = 0.00711716 Jy ! Component: 3150 - total flux cleaned = 0.00715778 Jy ! Component: 3200 - total flux cleaned = 0.00718823 Jy ! Component: 3250 - total flux cleaned = 0.00723867 Jy ! Component: 3300 - total flux cleaned = 0.00728886 Jy ! Component: 3350 - total flux cleaned = 0.00733893 Jy ! Component: 3400 - total flux cleaned = 0.00737894 Jy ! Component: 3450 - total flux cleaned = 0.00744856 Jy ! Component: 3500 - total flux cleaned = 0.00749818 Jy ! Component: 3550 - total flux cleaned = 0.00753777 Jy ! Component: 3600 - total flux cleaned = 0.00759704 Jy ! Component: 3650 - total flux cleaned = 0.00765617 Jy ! Component: 3700 - total flux cleaned = 0.00770527 Jy ! Component: 3750 - total flux cleaned = 0.00774452 Jy ! Component: 3800 - total flux cleaned = 0.00781297 Jy ! Component: 3850 - total flux cleaned = 0.00786174 Jy ! Component: 3900 - total flux cleaned = 0.0079104 Jy ! Component: 3950 - total flux cleaned = 0.00795898 Jy ! Component: 4000 - total flux cleaned = 0.00798806 Jy ! Component: 4050 - total flux cleaned = 0.00801707 Jy ! Total flux subtracted in 4096 components = 0.00810396 Jy ! Clean residual min=-0.000500 max=0.000583 Jy/beam ! Clean residual mean=-0.000002 rms=0.000192 Jy/beam ! Combined flux in latest and established models = 0.0612444 Jy keep ! Adding 397 model components to the UV plane model. ! The established model now contains 461 components and 0.0612444 Jy ![Exited script file: muppet] wmap "J0801+1153_S_2017_09_26_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.267 x 12.38 at -23.57 degrees (North through East) ! Clean map min=-0.0030214 max=0.051726 Jy/beam ! Writing clean map to FITS file: J0801+1153_S_2017_09_26_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.0517261 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000203381 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -1.17957 1.17957 2.35914 4.71827 9.43654 18.8731 37.7462 75.4923 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0006 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.051 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.267 x 12.38 at -23.57 degrees (North through East) ! Clean map min=-0.0030214 max=0.051726 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J0801+1153_S_2017_09_26_pus_uvs.log closed on Sat May 11 12:58:27 2019