! Started logfile: J0800-3959_S_2017_05_27_pus_uvs.log on Fri May 3 11:01:06 2019 obs J0800-3959_S_2017_05_27_pus_uva.fits ! Reading UV FITS file: J0800-3959_S_2017_05_27_pus_uva.fits ! AN table 1: 98 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.327891 visibilities/baseline/integration-bin. ! *** This seems a bit low - see "help observe" on the binwid argument. ! Found source: J0800-3959 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 1211 lines of history. ! ! Reading 5784 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J0800-3959_S_2017_05_27_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 397 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 495 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 495 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 698 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.885972Jy sigma=0.005081 ! Fit after self-cal, rms=0.860841Jy sigma=0.004960 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=10.94 mas, bmaj=90.36 mas, bpa=-2.912 degrees ! Estimated noise=8444 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.122209 Jy ! Component: 100 - total flux cleaned = 0.155726 Jy ! Total flux subtracted in 100 components = 0.155726 Jy ! Clean residual min=-0.015609 max=0.015532 Jy/beam ! Clean residual mean=-0.000740 rms=0.006956 Jy/beam ! Combined flux in latest and established models = 0.155726 Jy ! Performing phase self-cal ! Adding 38 model components to the UV plane model. ! The established model now contains 38 components and 0.155726 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.126483Jy sigma=0.000624 ! Fit after self-cal, rms=0.126403Jy sigma=0.000623 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=12.49 mas, bmaj=93.11 mas, bpa=-1.371 degrees ! Estimated noise=2065.22 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00860254 Jy ! Component: 100 - total flux cleaned = 0.0121156 Jy ! Component: 150 - total flux cleaned = 0.0147087 Jy ! Component: 200 - total flux cleaned = 0.0175273 Jy ! Total flux subtracted in 200 components = 0.0175273 Jy ! Clean residual min=-0.002488 max=0.002489 Jy/beam ! Clean residual mean=-0.000001 rms=0.001025 Jy/beam ! Combined flux in latest and established models = 0.173253 Jy ! Performing phase self-cal ! Adding 84 model components to the UV plane model. ! The established model now contains 122 components and 0.173253 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.125499Jy sigma=0.000618 ! Fit after self-cal, rms=0.125379Jy sigma=0.000618 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.94 HN 1.00* KP 1.00 ! LA 1.00 MK 1.00* NL 0.99 OV 1.01 ! PT 1.05 SC 1.00* ! ! ! Correcting IF 2. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.96 HN 1.00* KP 0.92 ! LA 0.95 MK 1.00* NL 1.00* OV 1.12 ! PT 1.02 SC 1.00* ! ! ! Correcting IF 3. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.03 HN 1.00* KP 1.08 ! LA 0.96 MK 1.00* NL 1.00* OV 0.94 ! PT 0.94 SC 1.00* ! ! ! Correcting IF 4. ! A total of 282 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.00* FD 0.00* HN 0.00* KP 0.00* ! LA 0.00* MK 0.00* NL 0.00* OV 0.00* ! PT 0.00* SC 0.00* ! ! ! Fit before self-cal, rms=0.125379Jy sigma=0.000618 ! Fit after self-cal, rms=0.125831Jy sigma=0.000621 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=12.04 mas, bmaj=94.71 mas, bpa=-1.629 degrees ! Estimated noise=2152.02 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00138734 Jy ! Component: 100 - total flux cleaned = 0.00181113 Jy ! Component: 150 - total flux cleaned = 0.00203061 Jy ! Component: 200 - total flux cleaned = 0.0023121 Jy ! Total flux subtracted in 200 components = 0.0023121 Jy ! Clean residual min=-0.001174 max=0.001138 Jy/beam ! Clean residual mean=-0.000002 rms=0.000479 Jy/beam ! Combined flux in latest and established models = 0.175565 Jy ! Performing phase self-cal ! Adding 77 model components to the UV plane model. ! The established model now contains 199 components and 0.175565 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.125678Jy sigma=0.000620 ! Fit after self-cal, rms=0.125702Jy sigma=0.000620 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.125702Jy sigma=0.000620 ! Fit after self-cal, rms=0.125388Jy sigma=0.000620 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=12.04 mas, bmaj=94.61 mas, bpa=-1.64 degrees ! Estimated noise=2151.21 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0010132 Jy ! Component: 100 - total flux cleaned = 0.0012264 Jy ! Component: 150 - total flux cleaned = 0.00162711 Jy ! Component: 200 - total flux cleaned = 0.00209943 Jy ! Total flux subtracted in 200 components = 0.00209943 Jy ! Clean residual min=-0.001129 max=0.001144 Jy/beam ! Clean residual mean=-0.000009 rms=0.000431 Jy/beam ! Combined flux in latest and established models = 0.177665 Jy selfcal ! Performing phase self-cal ! Adding 61 model components to the UV plane model. ! The established model now contains 250 components and 0.177665 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.125281Jy sigma=0.000620 ! Fit after self-cal, rms=0.125322Jy sigma=0.000620 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000853048 Jy ! Component: 100 - total flux cleaned = 0.00100112 Jy ! Component: 150 - total flux cleaned = 0.000646293 Jy ! Component: 200 - total flux cleaned = 0.000197668 Jy ! Total flux subtracted in 200 components = 0.000197668 Jy ! Clean residual min=-0.001308 max=0.001311 Jy/beam ! Clean residual mean=0.000005 rms=0.000450 Jy/beam ! Combined flux in latest and established models = 0.177862 Jy ! Performing phase self-cal ! Adding 47 model components to the UV plane model. ! The established model now contains 290 components and 0.177863 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.125209Jy sigma=0.000619 ! Fit after self-cal, rms=0.125227Jy sigma=0.000619 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.125227Jy sigma=0.000619 ! Fit after self-cal, rms=0.124727Jy sigma=0.000619 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=12.03 mas, bmaj=94.5 mas, bpa=-1.656 degrees ! Estimated noise=2152.72 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00037503 Jy ! Component: 100 - total flux cleaned = 0.000500098 Jy ! Component: 150 - total flux cleaned = 0.00063013 Jy ! Component: 200 - total flux cleaned = 0.00087696 Jy ! Total flux subtracted in 200 components = 0.00087696 Jy ! Clean residual min=-0.001029 max=0.001085 Jy/beam ! Clean residual mean=0.000007 rms=0.000377 Jy/beam ! Combined flux in latest and established models = 0.178739 Jy selfcal ! Performing phase self-cal ! Adding 36 model components to the UV plane model. ! The established model now contains 320 components and 0.17874 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.124636Jy sigma=0.000619 ! Fit after self-cal, rms=0.124670Jy sigma=0.000619 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000254513 Jy ! Component: 100 - total flux cleaned = 0.000486845 Jy ! Component: 150 - total flux cleaned = 0.000649424 Jy ! Component: 200 - total flux cleaned = 0.000803523 Jy ! Total flux subtracted in 200 components = 0.000803523 Jy ! Clean residual min=-0.000884 max=0.000860 Jy/beam ! Clean residual mean=0.000006 rms=0.000340 Jy/beam ! Combined flux in latest and established models = 0.179543 Jy ! Performing phase self-cal ! Adding 41 model components to the UV plane model. ! The established model now contains 345 components and 0.179543 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.124594Jy sigma=0.000619 ! Fit after self-cal, rms=0.124617Jy sigma=0.000619 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.124617Jy sigma=0.000619 ! Fit after self-cal, rms=0.124110Jy sigma=0.000619 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=13.05 mas, bmaj=94.28 mas, bpa=-1.411 degrees ! Estimated noise=2130.24 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00021162 Jy ! Component: 100 - total flux cleaned = 0.000253252 Jy ! Component: 150 - total flux cleaned = 5.65668e-05 Jy ! Component: 200 - total flux cleaned = -7.69485e-05 Jy ! Total flux subtracted in 200 components = -7.69485e-05 Jy ! Clean residual min=-0.000784 max=0.000785 Jy/beam ! Clean residual mean=0.000002 rms=0.000272 Jy/beam ! Combined flux in latest and established models = 0.179466 Jy selfcal ! Performing phase self-cal ! Adding 46 model components to the UV plane model. ! The established model now contains 376 components and 0.179466 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.124067Jy sigma=0.000619 ! Fit after self-cal, rms=0.124068Jy sigma=0.000619 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 3.21419e-06 Jy ! Component: 100 - total flux cleaned = 4.36064e-05 Jy ! Component: 150 - total flux cleaned = 4.40514e-05 Jy ! Component: 200 - total flux cleaned = -1.50564e-05 Jy ! Total flux subtracted in 200 components = -1.50564e-05 Jy ! Clean residual min=-0.000966 max=0.001018 Jy/beam ! Clean residual mean=0.000008 rms=0.000289 Jy/beam ! Combined flux in latest and established models = 0.179451 Jy ! Performing phase self-cal ! Adding 36 model components to the UV plane model. ! The established model now contains 400 components and 0.179451 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.124030Jy sigma=0.000619 ! Fit after self-cal, rms=0.124048Jy sigma=0.000619 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=12.02 mas, bmaj=94.45 mas, bpa=-1.669 degrees ! Estimated noise=2152.82 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 12.02 x 94.45 at -1.669 degrees (North through East) ! Clean map min=-0.0046506 max=0.13252 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=10.54 mas, bmaj=87.12 mas, bpa=-2.968 degrees ! Estimated noise=2671.32 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.112385 Jy ! Component: 100 - total flux cleaned = 0.145322 Jy ! Component: 150 - total flux cleaned = 0.155809 Jy ! Component: 200 - total flux cleaned = 0.154697 Jy ! Total flux subtracted in 200 components = 0.154697 Jy ! Clean residual min=-0.009809 max=0.009753 Jy/beam ! Clean residual mean=-0.000074 rms=0.003180 Jy/beam ! Combined flux in latest and established models = 0.154697 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 36 model components to the UV plane model. ! The established model now contains 36 components and 0.154697 Jy ! Inverting map and beam ! Estimated beam: bmin=12.02 mas, bmaj=94.45 mas, bpa=-1.669 degrees ! Estimated noise=2152.82 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00135899 Jy ! Component: 100 - total flux cleaned = -0.0031092 Jy ! Component: 150 - total flux cleaned = -0.00428777 Jy ! Component: 200 - total flux cleaned = -0.00358452 Jy ! Total flux subtracted in 200 components = -0.00358452 Jy ! Clean residual min=-0.002270 max=0.002224 Jy/beam ! Clean residual mean=-0.000027 rms=0.001007 Jy/beam ! Combined flux in latest and established models = 0.151113 Jy ! Adding 94 model components to the UV plane model. ! The established model now contains 129 components and 0.151113 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=13.05 mas, bmaj=94.28 mas, bpa=-1.411 degrees ! Estimated noise=2130.24 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -4.05946e-05 Jy ! Component: 100 - total flux cleaned = -0.000316975 Jy ! Component: 150 - total flux cleaned = -0.000653294 Jy ! Component: 200 - total flux cleaned = -0.000968135 Jy ! Total flux subtracted in 200 components = -0.000968135 Jy ! Clean residual min=-0.001256 max=0.001254 Jy/beam ! Clean residual mean=-0.000016 rms=0.000569 Jy/beam ! Combined flux in latest and established models = 0.150145 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000144742 Jy ! Component: 100 - total flux cleaned = 7.40114e-05 Jy ! Component: 150 - total flux cleaned = 0.000144633 Jy ! Component: 200 - total flux cleaned = 0.000140839 Jy ! Total flux subtracted in 200 components = 0.000140839 Jy ! Clean residual min=-0.001438 max=0.001425 Jy/beam ! Clean residual mean=-0.000021 rms=0.000529 Jy/beam ! Combined flux in latest and established models = 0.150286 Jy ! Adding 155 model components to the UV plane model. ! The established model now contains 276 components and 0.150286 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=12.02 mas, bmaj=94.45 mas, bpa=-1.669 degrees ! Estimated noise=2152.82 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00026375 Jy ! Component: 100 - total flux cleaned = -7.45816e-05 Jy ! Component: 150 - total flux cleaned = -0.000420937 Jy ! Component: 200 - total flux cleaned = -0.000799018 Jy ! Total flux subtracted in 200 components = -0.000799018 Jy ! Clean residual min=-0.001332 max=0.001348 Jy/beam ! Clean residual mean=0.000003 rms=0.000480 Jy/beam ! Combined flux in latest and established models = 0.149487 Jy selfcal ! Performing phase self-cal ! Adding 41 model components to the UV plane model. ! The established model now contains 313 components and 0.149487 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.124115Jy sigma=0.000619 ! Fit after self-cal, rms=0.124070Jy sigma=0.000619 wmodel J0800-3959_S_2017_05_27_pus_map.mod ! Writing 313 model components to file: J0800-3959_S_2017_05_27_pus_map.mod wobs J0800-3959_S_2017_05_27_pus_uvs.fits ! Writing UV FITS file: J0800-3959_S_2017_05_27_pus_uvs.fits wwins J0800-3959_S_2017_05_27_pus_map.win ! wwins: No CLEAN windows to write. ! Error occured in command: wwins ![Exited script file: muppet] ! wmap "J0800-3959_S_2017_05_27_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 12.02 x 94.45 at -1.669 degrees (North through East) ! Clean map min=-0.0050798 max=0.12816 Jy/beam ! Writing clean map to FITS file: J0800-3959_S_2017_05_27_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.128158 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000411961 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.964343 0.964343 1.92869 3.85737 7.71474 15.4295 30.859 61.7179 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0012 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.128 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 12.02 x 94.45 at -1.669 degrees (North through East) ! Clean map min=-0.0050798 max=0.12816 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J0800-3959_S_2017_05_27_pus_uvs.log closed on Fri May 3 11:01:15 2019