! Started logfile: J0755-4239_S_2017_09_26_pus_uvs.log on Sat May 11 12:58:16 2019 obs J0755-4239_S_2017_09_26_pus_uva.fits ! Reading UV FITS file: J0755-4239_S_2017_09_26_pus_uva.fits ! AN table 1: 295 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.220621 visibilities/baseline/integration-bin. ! *** This seems a bit low - see "help observe" on the binwid argument. ! Found source: J0755-4239 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 674 lines of history. ! ! Reading 9372 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J0755-4239_S_2017_09_26_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 1333 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 1333 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 1333 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 2304 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.934962Jy sigma=0.005683 ! Fit after self-cal, rms=0.886630Jy sigma=0.005396 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.68 mas, bmaj=21.09 mas, bpa=-24.89 degrees ! Estimated noise=2548.24 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0752457 Jy ! Component: 100 - total flux cleaned = 0.103387 Jy ! Total flux subtracted in 100 components = 0.103387 Jy ! Clean residual min=-0.011020 max=0.013921 Jy/beam ! Clean residual mean=-0.000134 rms=0.003739 Jy/beam ! Combined flux in latest and established models = 0.103387 Jy ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 25 components and 0.103387 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.105918Jy sigma=0.000632 ! Fit after self-cal, rms=0.105506Jy sigma=0.000630 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.931 mas, bmaj=26.1 mas, bpa=-24.05 degrees ! Estimated noise=1360.8 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0251948 Jy ! Component: 100 - total flux cleaned = 0.0344718 Jy ! Component: 150 - total flux cleaned = 0.03925 Jy ! Component: 200 - total flux cleaned = 0.0423871 Jy ! Total flux subtracted in 200 components = 0.0423871 Jy ! Clean residual min=-0.002776 max=0.003267 Jy/beam ! Clean residual mean=-0.000152 rms=0.001046 Jy/beam ! Combined flux in latest and established models = 0.145774 Jy ! Performing phase self-cal ! Adding 75 model components to the UV plane model. ! The established model now contains 89 components and 0.145774 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.100078Jy sigma=0.000599 ! Fit after self-cal, rms=0.099898Jy sigma=0.000598 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! A total of 15 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.05 ! LA 0.99 MK 1.07 NL 1.00* OV 1.01 ! PT 1.02 ! ! ! Correcting IF 2. ! A total of 15 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.01 ! LA 0.97 MK 1.11 NL 1.00* OV 1.06 ! PT 0.96 ! ! ! Correcting IF 3. ! A total of 15 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 0.92 ! LA 0.95 MK 1.05 NL 1.00* OV 1.00 ! PT 0.96 ! ! ! Correcting IF 4. ! A total of 351 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.00* FD 0.00* HN 0.00* KP 0.00* ! LA 0.00* MK 0.00* NL 0.00* OV 0.00* ! PT 0.00* ! ! ! Fit before self-cal, rms=0.099898Jy sigma=0.000598 ! Fit after self-cal, rms=0.100495Jy sigma=0.000602 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=4.172 mas, bmaj=27.24 mas, bpa=-23.6 degrees ! Estimated noise=1398.03 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00159272 Jy ! Component: 100 - total flux cleaned = 0.001927 Jy ! Component: 150 - total flux cleaned = 0.00203146 Jy ! Component: 200 - total flux cleaned = 0.00209135 Jy ! Total flux subtracted in 200 components = 0.00209135 Jy ! Clean residual min=-0.002682 max=0.002671 Jy/beam ! Clean residual mean=-0.000007 rms=0.000748 Jy/beam ! Combined flux in latest and established models = 0.147865 Jy ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 97 components and 0.147865 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.100461Jy sigma=0.000601 ! Fit after self-cal, rms=0.100472Jy sigma=0.000601 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.100472Jy sigma=0.000601 ! Fit after self-cal, rms=0.100641Jy sigma=0.000601 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=4.169 mas, bmaj=27.21 mas, bpa=-23.59 degrees ! Estimated noise=1400.34 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00103654 Jy ! Component: 100 - total flux cleaned = 0.00125532 Jy ! Component: 150 - total flux cleaned = 0.00133567 Jy ! Component: 200 - total flux cleaned = 0.00140581 Jy ! Total flux subtracted in 200 components = 0.00140581 Jy ! Clean residual min=-0.002425 max=0.002579 Jy/beam ! Clean residual mean=-0.000001 rms=0.000689 Jy/beam ! Combined flux in latest and established models = 0.149271 Jy selfcal ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 105 components and 0.149271 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.100623Jy sigma=0.000601 ! Fit after self-cal, rms=0.100620Jy sigma=0.000601 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000127634 Jy ! Component: 100 - total flux cleaned = 0.0001551 Jy ! Component: 150 - total flux cleaned = 0.000179676 Jy ! Component: 200 - total flux cleaned = 0.000202404 Jy ! Total flux subtracted in 200 components = 0.000202404 Jy ! Clean residual min=-0.002391 max=0.002576 Jy/beam ! Clean residual mean=0.000001 rms=0.000677 Jy/beam ! Combined flux in latest and established models = 0.149473 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 111 components and 0.149473 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.100607Jy sigma=0.000601 ! Fit after self-cal, rms=0.100603Jy sigma=0.000601 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.100603Jy sigma=0.000601 ! Fit after self-cal, rms=0.100453Jy sigma=0.000601 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=4.15 mas, bmaj=27.14 mas, bpa=-23.55 degrees ! Estimated noise=1399.19 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000467372 Jy ! Component: 100 - total flux cleaned = 0.000610165 Jy ! Component: 150 - total flux cleaned = 0.000730257 Jy ! Component: 200 - total flux cleaned = 0.000812128 Jy ! Total flux subtracted in 200 components = 0.000812128 Jy ! Clean residual min=-0.002003 max=0.001882 Jy/beam ! Clean residual mean=0.000009 rms=0.000509 Jy/beam ! Combined flux in latest and established models = 0.150286 Jy selfcal ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 116 components and 0.150286 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.100440Jy sigma=0.000601 ! Fit after self-cal, rms=0.100443Jy sigma=0.000600 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 4.83583e-07 Jy ! Component: 100 - total flux cleaned = 2.70257e-05 Jy ! Component: 150 - total flux cleaned = 5.12913e-05 Jy ! Component: 200 - total flux cleaned = 7.13473e-05 Jy ! Total flux subtracted in 200 components = 7.13473e-05 Jy ! Clean residual min=-0.001892 max=0.001981 Jy/beam ! Clean residual mean=0.000012 rms=0.000522 Jy/beam ! Combined flux in latest and established models = 0.150357 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 120 components and 0.150357 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.100432Jy sigma=0.000600 ! Fit after self-cal, rms=0.100428Jy sigma=0.000600 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.100428Jy sigma=0.000600 ! Fit after self-cal, rms=0.100167Jy sigma=0.000600 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=12.35 mas, bmaj=50.41 mas, bpa=-10.42 degrees ! Estimated noise=1589.68 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000373397 Jy ! Component: 100 - total flux cleaned = 0.000556347 Jy ! Component: 150 - total flux cleaned = 0.00057849 Jy ! Component: 200 - total flux cleaned = 0.000593038 Jy ! Total flux subtracted in 200 components = 0.000593038 Jy ! Clean residual min=-0.001729 max=0.001310 Jy/beam ! Clean residual mean=0.000016 rms=0.000426 Jy/beam ! Combined flux in latest and established models = 0.15095 Jy selfcal ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 125 components and 0.15095 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.100166Jy sigma=0.000600 ! Fit after self-cal, rms=0.100168Jy sigma=0.000600 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 4.41619e-05 Jy ! Component: 100 - total flux cleaned = 4.39899e-05 Jy ! Component: 150 - total flux cleaned = 4.89237e-05 Jy ! Component: 200 - total flux cleaned = 4.88752e-05 Jy ! Total flux subtracted in 200 components = 4.88752e-05 Jy ! Clean residual min=-0.001730 max=0.001321 Jy/beam ! Clean residual mean=0.000017 rms=0.000427 Jy/beam ! Combined flux in latest and established models = 0.150999 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 133 components and 0.150999 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.100167Jy sigma=0.000600 ! Fit after self-cal, rms=0.100167Jy sigma=0.000600 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=4.126 mas, bmaj=27.1 mas, bpa=-23.5 degrees ! Estimated noise=1395.83 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.126 x 27.1 at -23.5 degrees (North through East) ! Clean map min=-0.0018471 max=0.10307 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.73 mas, bmaj=21.43 mas, bpa=-24.47 degrees ! Estimated noise=2793.57 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0757144 Jy ! Component: 100 - total flux cleaned = 0.105513 Jy ! Component: 150 - total flux cleaned = 0.122109 Jy ! Component: 200 - total flux cleaned = 0.131999 Jy ! Total flux subtracted in 200 components = 0.131999 Jy ! Clean residual min=-0.007877 max=0.005554 Jy/beam ! Clean residual mean=-0.000048 rms=0.001978 Jy/beam ! Combined flux in latest and established models = 0.131999 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 42 model components to the UV plane model. ! The established model now contains 42 components and 0.131999 Jy ! Inverting map and beam ! Estimated beam: bmin=4.126 mas, bmaj=27.1 mas, bpa=-23.5 degrees ! Estimated noise=1395.83 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00880273 Jy ! Component: 100 - total flux cleaned = 0.0129535 Jy ! Component: 150 - total flux cleaned = 0.0154076 Jy ! Component: 200 - total flux cleaned = 0.0168793 Jy ! Total flux subtracted in 200 components = 0.0168793 Jy ! Clean residual min=-0.002134 max=0.001748 Jy/beam ! Clean residual mean=-0.000017 rms=0.000575 Jy/beam ! Combined flux in latest and established models = 0.148878 Jy ! Adding 33 model components to the UV plane model. ! The established model now contains 75 components and 0.148878 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=12.35 mas, bmaj=50.41 mas, bpa=-10.42 degrees ! Estimated noise=1589.68 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000952379 Jy ! Component: 100 - total flux cleaned = 0.00148408 Jy ! Component: 150 - total flux cleaned = 0.0016955 Jy ! Component: 200 - total flux cleaned = 0.00175678 Jy ! Total flux subtracted in 200 components = 0.00175678 Jy ! Clean residual min=-0.001853 max=0.001333 Jy/beam ! Clean residual mean=0.000008 rms=0.000439 Jy/beam ! Combined flux in latest and established models = 0.150635 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 5.21851e-05 Jy ! Component: 100 - total flux cleaned = 9.01784e-05 Jy ! Component: 150 - total flux cleaned = 0.000117655 Jy ! Component: 200 - total flux cleaned = 0.000142275 Jy ! Total flux subtracted in 200 components = 0.000142275 Jy ! Clean residual min=-0.001844 max=0.001340 Jy/beam ! Clean residual mean=0.000011 rms=0.000433 Jy/beam ! Combined flux in latest and established models = 0.150777 Jy ! Adding 20 model components to the UV plane model. ! The established model now contains 95 components and 0.150777 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=4.126 mas, bmaj=27.1 mas, bpa=-23.5 degrees ! Estimated noise=1395.83 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -3.38773e-05 Jy ! Component: 100 - total flux cleaned = -1.7677e-05 Jy ! Component: 150 - total flux cleaned = 1.51556e-05 Jy ! Component: 200 - total flux cleaned = 2.94089e-05 Jy ! Total flux subtracted in 200 components = 2.94089e-05 Jy ! Clean residual min=-0.001938 max=0.001883 Jy/beam ! Clean residual mean=0.000008 rms=0.000523 Jy/beam ! Combined flux in latest and established models = 0.150807 Jy selfcal ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 104 components and 0.150807 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.100168Jy sigma=0.000600 ! Fit after self-cal, rms=0.100156Jy sigma=0.000600 wmodel J0755-4239_S_2017_09_26_pus_map.mod ! Writing 104 model components to file: J0755-4239_S_2017_09_26_pus_map.mod wobs J0755-4239_S_2017_09_26_pus_uvs.fits ! Writing UV FITS file: J0755-4239_S_2017_09_26_pus_uvs.fits wwins J0755-4239_S_2017_09_26_pus_map.win ! wwins: Wrote 1 windows to J0755-4239_S_2017_09_26_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -4.88196e-05 Jy ! Component: 100 - total flux cleaned = -0.000108081 Jy ! Component: 150 - total flux cleaned = 2.05266e-06 Jy ! Component: 200 - total flux cleaned = 2.74516e-05 Jy ! Component: 250 - total flux cleaned = 0.000102261 Jy ! Component: 300 - total flux cleaned = 0.00022041 Jy ! Component: 350 - total flux cleaned = 0.000289166 Jy ! Component: 400 - total flux cleaned = 0.000443523 Jy ! Component: 450 - total flux cleaned = 0.000572273 Jy ! Component: 500 - total flux cleaned = 0.00071833 Jy ! Component: 550 - total flux cleaned = 0.000800001 Jy ! Component: 600 - total flux cleaned = 0.000760378 Jy ! Component: 650 - total flux cleaned = 0.000799863 Jy ! Component: 700 - total flux cleaned = 0.000799848 Jy ! Component: 750 - total flux cleaned = 0.000819069 Jy ! Component: 800 - total flux cleaned = 0.000856281 Jy ! Component: 850 - total flux cleaned = 0.000874348 Jy ! Component: 900 - total flux cleaned = 0.000892318 Jy ! Component: 950 - total flux cleaned = 0.000927852 Jy ! Component: 1000 - total flux cleaned = 0.000945496 Jy ! Component: 1050 - total flux cleaned = 0.000980134 Jy ! Component: 1100 - total flux cleaned = 0.000980231 Jy ! Component: 1150 - total flux cleaned = 0.0010138 Jy ! Component: 1200 - total flux cleaned = 0.00103041 Jy ! Component: 1250 - total flux cleaned = 0.00103031 Jy ! Component: 1300 - total flux cleaned = 0.0010302 Jy ! Component: 1350 - total flux cleaned = 0.00103029 Jy ! Component: 1400 - total flux cleaned = 0.00104616 Jy ! Component: 1450 - total flux cleaned = 0.00104603 Jy ! Component: 1500 - total flux cleaned = 0.00103036 Jy ! Component: 1550 - total flux cleaned = 0.000984111 Jy ! Component: 1600 - total flux cleaned = 0.000984079 Jy ! Component: 1650 - total flux cleaned = 0.000908182 Jy ! Component: 1700 - total flux cleaned = 0.000908041 Jy ! Component: 1750 - total flux cleaned = 0.000908176 Jy ! Component: 1800 - total flux cleaned = 0.000893274 Jy ! Component: 1850 - total flux cleaned = 0.000878281 Jy ! Component: 1900 - total flux cleaned = 0.00087828 Jy ! Component: 1950 - total flux cleaned = 0.000863433 Jy ! Component: 2000 - total flux cleaned = 0.000848688 Jy ! Component: 2050 - total flux cleaned = 0.000848606 Jy ! Component: 2100 - total flux cleaned = 0.000848594 Jy ! Component: 2150 - total flux cleaned = 0.000863015 Jy ! Component: 2200 - total flux cleaned = 0.000862917 Jy ! Component: 2250 - total flux cleaned = 0.000877458 Jy ! Component: 2300 - total flux cleaned = 0.000935528 Jy ! Component: 2350 - total flux cleaned = 0.000979067 Jy ! Component: 2400 - total flux cleaned = 0.00102271 Jy ! Component: 2450 - total flux cleaned = 0.00108075 Jy ! Component: 2500 - total flux cleaned = 0.00113871 Jy ! Component: 2550 - total flux cleaned = 0.0011822 Jy ! Component: 2600 - total flux cleaned = 0.00122577 Jy ! Component: 2650 - total flux cleaned = 0.0012839 Jy ! Component: 2700 - total flux cleaned = 0.00126938 Jy ! Component: 2750 - total flux cleaned = 0.00129848 Jy ! Component: 2800 - total flux cleaned = 0.00131322 Jy ! Component: 2850 - total flux cleaned = 0.0013133 Jy ! Component: 2900 - total flux cleaned = 0.00134274 Jy ! Component: 2950 - total flux cleaned = 0.00135729 Jy ! Component: 3000 - total flux cleaned = 0.00137201 Jy ! Component: 3050 - total flux cleaned = 0.00134221 Jy ! Component: 3100 - total flux cleaned = 0.00131238 Jy ! Component: 3150 - total flux cleaned = 0.00123719 Jy ! Component: 3200 - total flux cleaned = 0.00119188 Jy ! Component: 3250 - total flux cleaned = 0.00114632 Jy ! Component: 3300 - total flux cleaned = 0.00105465 Jy ! Component: 3350 - total flux cleaned = 0.00100852 Jy ! Component: 3400 - total flux cleaned = 0.000931149 Jy ! Component: 3450 - total flux cleaned = 0.000915719 Jy ! Component: 3500 - total flux cleaned = 0.000837367 Jy ! Component: 3550 - total flux cleaned = 0.000774144 Jy ! Component: 3600 - total flux cleaned = 0.00067851 Jy ! Component: 3650 - total flux cleaned = 0.000614499 Jy ! Component: 3700 - total flux cleaned = 0.00054987 Jy ! Component: 3750 - total flux cleaned = 0.000435712 Jy ! Component: 3800 - total flux cleaned = 0.000419242 Jy ! Component: 3850 - total flux cleaned = 0.000369456 Jy ! Component: 3900 - total flux cleaned = 0.000319449 Jy ! Component: 3950 - total flux cleaned = 0.000269017 Jy ! Component: 4000 - total flux cleaned = 0.000201082 Jy ! Component: 4050 - total flux cleaned = 0.00021811 Jy ! Total flux subtracted in 4096 components = 0.00011477 Jy ! Clean residual min=-0.000960 max=0.000958 Jy/beam ! Clean residual mean=0.000011 rms=0.000308 Jy/beam ! Combined flux in latest and established models = 0.150921 Jy keep ! Adding 171 model components to the UV plane model. ! The established model now contains 275 components and 0.150921 Jy ![Exited script file: muppet] wmap "J0755-4239_S_2017_09_26_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.126 x 27.1 at -23.5 degrees (North through East) ! Clean map min=-0.0020945 max=0.098242 Jy/beam ! Writing clean map to FITS file: J0755-4239_S_2017_09_26_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.0982419 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000350412 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -1.07005 1.07005 2.14009 4.28019 8.56038 17.1208 34.2415 68.483 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.001 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.098 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.126 x 27.1 at -23.5 degrees (North through East) ! Clean map min=-0.0020945 max=0.098242 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J0755-4239_S_2017_09_26_pus_uvs.log closed on Sat May 11 12:58:21 2019