! Started logfile: J0755+6312_S_2017_08_12_pus_uvs.log on Fri May 10 14:55:11 2019 obs J0755+6312_S_2017_08_12_pus_uva.fits ! Reading UV FITS file: J0755+6312_S_2017_08_12_pus_uva.fits ! AN table 1: 144 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.969753 visibilities/baseline/integration-bin. ! Found source: J0755+6312 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 594 lines of history. ! ! Reading 25136 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J0755+6312_S_2017_08_12_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 25 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 40 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 40 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 817 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.923121Jy sigma=0.008332 ! Fit after self-cal, rms=0.914642Jy sigma=0.008264 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.302 mas, bmaj=3.608 mas, bpa=28.17 degrees ! Estimated noise=924.796 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0695222 Jy ! Component: 100 - total flux cleaned = 0.0847073 Jy ! Total flux subtracted in 100 components = 0.0847073 Jy ! Clean residual min=-0.003023 max=0.004371 Jy/beam ! Clean residual mean=-0.000005 rms=0.000759 Jy/beam ! Combined flux in latest and established models = 0.0847073 Jy ! Performing phase self-cal ! Adding 3 model components to the UV plane model. ! The established model now contains 3 components and 0.0847073 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.080289Jy sigma=0.000675 ! Fit after self-cal, rms=0.080274Jy sigma=0.000675 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=4.028 mas, bmaj=4.441 mas, bpa=30.2 degrees ! Estimated noise=567.122 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00333052 Jy ! Component: 100 - total flux cleaned = 0.00457395 Jy ! Component: 150 - total flux cleaned = 0.00519431 Jy ! Component: 200 - total flux cleaned = 0.00542215 Jy ! Total flux subtracted in 200 components = 0.00542215 Jy ! Clean residual min=-0.002370 max=0.002137 Jy/beam ! Clean residual mean=-0.000001 rms=0.000537 Jy/beam ! Combined flux in latest and established models = 0.0901295 Jy ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 20 components and 0.0901295 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.080129Jy sigma=0.000674 ! Fit after self-cal, rms=0.080136Jy sigma=0.000674 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 0.91 HN 0.95 KP 1.08 ! LA 1.04 MK 1.09 NL 0.89 OV 1.05 ! PT 1.05 SC 0.94 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 0.95 HN 0.98 KP 1.01 ! LA 1.01 MK 1.02 NL 1.03 OV 1.10 ! PT 1.02 SC 1.11 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.89 FD 1.03 HN 1.00 KP 0.98 ! LA 1.01 MK 1.05 NL 0.98 OV 0.95 ! PT 0.99 SC 1.03 ! ! ! Correcting IF 4. ! A total of 72 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.19 HN 0.92 KP 1.00* ! LA 0.94 MK 0.85 NL 1.00* OV 1.00* ! PT 1.03 SC 1.00* ! ! ! Fit before self-cal, rms=0.080136Jy sigma=0.000674 ! Fit after self-cal, rms=0.079572Jy sigma=0.000671 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=4.057 mas, bmaj=4.453 mas, bpa=29.05 degrees ! Estimated noise=569.081 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000100604 Jy ! Component: 100 - total flux cleaned = 0.000124428 Jy ! Component: 150 - total flux cleaned = 0.000134615 Jy ! Component: 200 - total flux cleaned = 0.000134388 Jy ! Total flux subtracted in 200 components = 0.000134388 Jy ! Clean residual min=-0.001752 max=0.001992 Jy/beam ! Clean residual mean=-0.000005 rms=0.000479 Jy/beam ! Combined flux in latest and established models = 0.0902639 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 29 components and 0.0902638 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.079568Jy sigma=0.000671 ! Fit after self-cal, rms=0.079562Jy sigma=0.000671 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.079562Jy sigma=0.000671 ! Fit after self-cal, rms=0.079631Jy sigma=0.000668 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=4.056 mas, bmaj=4.449 mas, bpa=29.79 degrees ! Estimated noise=568.118 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000101541 Jy ! Component: 100 - total flux cleaned = -0.000100739 Jy ! Component: 150 - total flux cleaned = -8.38345e-05 Jy ! Component: 200 - total flux cleaned = -6.88853e-05 Jy ! Total flux subtracted in 200 components = -6.88853e-05 Jy ! Clean residual min=-0.001548 max=0.001588 Jy/beam ! Clean residual mean=0.000001 rms=0.000360 Jy/beam ! Combined flux in latest and established models = 0.090195 Jy selfcal ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 36 components and 0.090195 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.079629Jy sigma=0.000668 ! Fit after self-cal, rms=0.079662Jy sigma=0.000668 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-78, -90.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00133892 Jy ! Component: 100 - total flux cleaned = 0.00152713 Jy ! Component: 150 - total flux cleaned = 0.0015261 Jy ! Component: 200 - total flux cleaned = 0.00149856 Jy ! Total flux subtracted in 200 components = 0.00149856 Jy ! Clean residual min=-0.001571 max=0.001447 Jy/beam ! Clean residual mean=-0.000001 rms=0.000349 Jy/beam ! Combined flux in latest and established models = 0.0916935 Jy ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 51 components and 0.0916935 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.079625Jy sigma=0.000668 ! Fit after self-cal, rms=0.079624Jy sigma=0.000668 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.079624Jy sigma=0.000668 ! Fit after self-cal, rms=0.079602Jy sigma=0.000668 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=4.055 mas, bmaj=4.452 mas, bpa=29.97 degrees ! Estimated noise=567.19 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0002621 Jy ! Component: 100 - total flux cleaned = 0.000215271 Jy ! Component: 150 - total flux cleaned = 0.000171933 Jy ! Component: 200 - total flux cleaned = 0.000132186 Jy ! Total flux subtracted in 200 components = 0.000132186 Jy ! Clean residual min=-0.001538 max=0.001406 Jy/beam ! Clean residual mean=0.000000 rms=0.000344 Jy/beam ! Combined flux in latest and established models = 0.0918257 Jy selfcal ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 54 components and 0.0918257 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.079589Jy sigma=0.000668 ! Fit after self-cal, rms=0.079593Jy sigma=0.000668 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 1.41098e-06 Jy ! Component: 100 - total flux cleaned = -3.44688e-05 Jy ! Component: 150 - total flux cleaned = -5.08579e-05 Jy ! Component: 200 - total flux cleaned = -6.60365e-05 Jy ! Total flux subtracted in 200 components = -6.60365e-05 Jy ! Clean residual min=-0.001516 max=0.001393 Jy/beam ! Clean residual mean=0.000000 rms=0.000342 Jy/beam ! Combined flux in latest and established models = 0.0917597 Jy ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 61 components and 0.0917597 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.079586Jy sigma=0.000668 ! Fit after self-cal, rms=0.079586Jy sigma=0.000668 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.079586Jy sigma=0.000668 ! Fit after self-cal, rms=0.079588Jy sigma=0.000668 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.008 mas, bmaj=8.843 mas, bpa=59.86 degrees ! Estimated noise=719.192 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00010006 Jy ! Component: 100 - total flux cleaned = 0.000132359 Jy ! Component: 150 - total flux cleaned = 0.000168839 Jy ! Component: 200 - total flux cleaned = 0.000215185 Jy ! Total flux subtracted in 200 components = 0.000215185 Jy ! Clean residual min=-0.001862 max=0.001677 Jy/beam ! Clean residual mean=0.000000 rms=0.000454 Jy/beam ! Combined flux in latest and established models = 0.0919749 Jy selfcal ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 70 components and 0.0919749 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.079587Jy sigma=0.000668 ! Fit after self-cal, rms=0.079588Jy sigma=0.000668 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 4.75984e-05 Jy ! Component: 100 - total flux cleaned = 5.33891e-05 Jy ! Component: 150 - total flux cleaned = 6.43313e-05 Jy ! Component: 200 - total flux cleaned = 7.90546e-05 Jy ! Total flux subtracted in 200 components = 7.90546e-05 Jy ! Clean residual min=-0.001851 max=0.001666 Jy/beam ! Clean residual mean=0.000000 rms=0.000453 Jy/beam ! Combined flux in latest and established models = 0.0920539 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 72 components and 0.0920539 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.079588Jy sigma=0.000668 ! Fit after self-cal, rms=0.079588Jy sigma=0.000668 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=4.054 mas, bmaj=4.452 mas, bpa=30.11 degrees ! Estimated noise=567.08 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.054 x 4.452 at 30.11 degrees (North through East) ! Clean map min=-0.0014554 max=0.087987 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.32 mas, bmaj=3.631 mas, bpa=29.38 degrees ! Estimated noise=922.128 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0691741 Jy ! Component: 100 - total flux cleaned = 0.084281 Jy ! Component: 150 - total flux cleaned = 0.0881153 Jy ! Component: 200 - total flux cleaned = 0.089249 Jy ! Total flux subtracted in 200 components = 0.089249 Jy ! Clean residual min=-0.002636 max=0.002320 Jy/beam ! Clean residual mean=0.000001 rms=0.000610 Jy/beam ! Combined flux in latest and established models = 0.089249 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 16 model components to the UV plane model. ! The established model now contains 16 components and 0.089249 Jy ! Inverting map and beam ! Estimated beam: bmin=4.054 mas, bmaj=4.452 mas, bpa=30.11 degrees ! Estimated noise=567.08 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00102395 Jy ! Component: 100 - total flux cleaned = 0.00157239 Jy ! Component: 150 - total flux cleaned = 0.00188605 Jy ! Component: 200 - total flux cleaned = 0.00194613 Jy ! Total flux subtracted in 200 components = 0.00194613 Jy ! Clean residual min=-0.001549 max=0.001388 Jy/beam ! Clean residual mean=-0.000000 rms=0.000350 Jy/beam ! Combined flux in latest and established models = 0.0911951 Jy ! Adding 19 model components to the UV plane model. ! The established model now contains 33 components and 0.0911951 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.008 mas, bmaj=8.843 mas, bpa=59.86 degrees ! Estimated noise=719.192 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000243123 Jy ! Component: 100 - total flux cleaned = 0.000373469 Jy ! Component: 150 - total flux cleaned = 0.000465107 Jy ! Component: 200 - total flux cleaned = 0.000554293 Jy ! Total flux subtracted in 200 components = 0.000554293 Jy ! Clean residual min=-0.001873 max=0.001669 Jy/beam ! Clean residual mean=-0.000000 rms=0.000453 Jy/beam ! Combined flux in latest and established models = 0.0917494 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 6.38675e-05 Jy ! Component: 100 - total flux cleaned = 0.000118139 Jy ! Component: 150 - total flux cleaned = 0.000165021 Jy ! Component: 200 - total flux cleaned = 0.000205957 Jy ! Total flux subtracted in 200 components = 0.000205957 Jy ! Clean residual min=-0.001858 max=0.001675 Jy/beam ! Clean residual mean=0.000000 rms=0.000452 Jy/beam ! Combined flux in latest and established models = 0.0919554 Jy ! Adding 34 model components to the UV plane model. ! The established model now contains 65 components and 0.0919554 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=4.054 mas, bmaj=4.452 mas, bpa=30.11 degrees ! Estimated noise=567.08 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -8.90938e-05 Jy ! Component: 100 - total flux cleaned = -1.44902e-05 Jy ! Component: 150 - total flux cleaned = 8.26698e-06 Jy ! Component: 200 - total flux cleaned = 9.43126e-06 Jy ! Total flux subtracted in 200 components = 9.43126e-06 Jy ! Clean residual min=-0.001500 max=0.001382 Jy/beam ! Clean residual mean=0.000001 rms=0.000343 Jy/beam ! Combined flux in latest and established models = 0.0919648 Jy selfcal ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 71 components and 0.0919648 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.079595Jy sigma=0.000668 ! Fit after self-cal, rms=0.079594Jy sigma=0.000668 wmodel J0755+6312_S_2017_08_12_pus_map.mod ! Writing 71 model components to file: J0755+6312_S_2017_08_12_pus_map.mod wobs J0755+6312_S_2017_08_12_pus_uvs.fits ! Writing UV FITS file: J0755+6312_S_2017_08_12_pus_uvs.fits wwins J0755+6312_S_2017_08_12_pus_map.win ! wwins: Wrote 2 windows to J0755+6312_S_2017_08_12_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000198407 Jy ! Component: 100 - total flux cleaned = -0.000124555 Jy ! Component: 150 - total flux cleaned = -7.09259e-06 Jy ! Component: 200 - total flux cleaned = 6.14371e-05 Jy ! Component: 250 - total flux cleaned = 0.000127484 Jy ! Component: 300 - total flux cleaned = 0.000147727 Jy ! Component: 350 - total flux cleaned = 0.000167478 Jy ! Component: 400 - total flux cleaned = 0.000167411 Jy ! Component: 450 - total flux cleaned = 0.000226699 Jy ! Component: 500 - total flux cleaned = 0.000265131 Jy ! Component: 550 - total flux cleaned = 0.000283882 Jy ! Component: 600 - total flux cleaned = 0.000394985 Jy ! Component: 650 - total flux cleaned = 0.000376307 Jy ! Component: 700 - total flux cleaned = 0.000376367 Jy ! Component: 750 - total flux cleaned = 0.000341029 Jy ! Component: 800 - total flux cleaned = 0.000358783 Jy ! Component: 850 - total flux cleaned = 0.000393116 Jy ! Component: 900 - total flux cleaned = 0.000392942 Jy ! Component: 950 - total flux cleaned = 0.000443138 Jy ! Component: 1000 - total flux cleaned = 0.000442708 Jy ! Component: 1050 - total flux cleaned = 0.000410471 Jy ! Component: 1100 - total flux cleaned = 0.000458543 Jy ! Component: 1150 - total flux cleaned = 0.000442882 Jy ! Component: 1200 - total flux cleaned = 0.000489942 Jy ! Component: 1250 - total flux cleaned = 0.000489905 Jy ! Component: 1300 - total flux cleaned = 0.000520144 Jy ! Component: 1350 - total flux cleaned = 0.000415305 Jy ! Component: 1400 - total flux cleaned = 0.000445417 Jy ! Component: 1450 - total flux cleaned = 0.000431026 Jy ! Component: 1500 - total flux cleaned = 0.000488927 Jy ! Component: 1550 - total flux cleaned = 0.000503302 Jy ! Component: 1600 - total flux cleaned = 0.00050322 Jy ! Component: 1650 - total flux cleaned = 0.00048923 Jy ! Component: 1700 - total flux cleaned = 0.000489446 Jy ! Component: 1750 - total flux cleaned = 0.000503258 Jy ! Component: 1800 - total flux cleaned = 0.000503204 Jy ! Component: 1850 - total flux cleaned = 0.000489655 Jy ! Component: 1900 - total flux cleaned = 0.000463066 Jy ! Component: 1950 - total flux cleaned = 0.000489418 Jy ! Component: 2000 - total flux cleaned = 0.000463158 Jy ! Component: 2050 - total flux cleaned = 0.00041125 Jy ! Component: 2100 - total flux cleaned = 0.000449901 Jy ! Component: 2150 - total flux cleaned = 0.000437269 Jy ! Component: 2200 - total flux cleaned = 0.00047493 Jy ! Component: 2250 - total flux cleaned = 0.000424666 Jy ! Component: 2300 - total flux cleaned = 0.000399888 Jy ! Component: 2350 - total flux cleaned = 0.000461343 Jy ! Component: 2400 - total flux cleaned = 0.000436887 Jy ! Component: 2450 - total flux cleaned = 0.000412796 Jy ! Component: 2500 - total flux cleaned = 0.000388797 Jy ! Component: 2550 - total flux cleaned = 0.000448261 Jy ! Component: 2600 - total flux cleaned = 0.000448037 Jy ! Component: 2650 - total flux cleaned = 0.00038952 Jy ! Component: 2700 - total flux cleaned = 0.000436039 Jy ! Component: 2750 - total flux cleaned = 0.00047061 Jy ! Component: 2800 - total flux cleaned = 0.000436182 Jy ! Component: 2850 - total flux cleaned = 0.000447526 Jy ! Component: 2900 - total flux cleaned = 0.000447496 Jy ! Component: 2950 - total flux cleaned = 0.000458629 Jy ! Component: 3000 - total flux cleaned = 0.000525251 Jy ! Component: 3050 - total flux cleaned = 0.000525349 Jy ! Component: 3100 - total flux cleaned = 0.000536338 Jy ! Component: 3150 - total flux cleaned = 0.000569098 Jy ! Component: 3200 - total flux cleaned = 0.000590749 Jy ! Component: 3250 - total flux cleaned = 0.00062298 Jy ! Component: 3300 - total flux cleaned = 0.000623033 Jy ! Component: 3350 - total flux cleaned = 0.000654812 Jy ! Component: 3400 - total flux cleaned = 0.000633752 Jy ! Component: 3450 - total flux cleaned = 0.000633859 Jy ! Component: 3500 - total flux cleaned = 0.000685599 Jy ! Component: 3550 - total flux cleaned = 0.000675243 Jy ! Component: 3600 - total flux cleaned = 0.000654673 Jy ! Component: 3650 - total flux cleaned = 0.000685117 Jy ! Component: 3700 - total flux cleaned = 0.000664869 Jy ! Component: 3750 - total flux cleaned = 0.000685034 Jy ! Component: 3800 - total flux cleaned = 0.000615031 Jy ! Component: 3850 - total flux cleaned = 0.000674812 Jy ! Component: 3900 - total flux cleaned = 0.000684681 Jy ! Component: 3950 - total flux cleaned = 0.000655195 Jy ! Component: 4000 - total flux cleaned = 0.000655081 Jy ! Component: 4050 - total flux cleaned = 0.000606428 Jy ! Total flux subtracted in 4096 components = 0.000635455 Jy ! Clean residual min=-0.000490 max=0.000555 Jy/beam ! Clean residual mean=-0.000002 rms=0.000173 Jy/beam ! Combined flux in latest and established models = 0.0926002 Jy keep ! Adding 303 model components to the UV plane model. ! The established model now contains 374 components and 0.0926002 Jy ![Exited script file: muppet] wmap "J0755+6312_S_2017_08_12_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.054 x 4.452 at 30.11 degrees (North through East) ! Clean map min=-0.001146 max=0.087995 Jy/beam ! Writing clean map to FITS file: J0755+6312_S_2017_08_12_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.0879952 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000172561 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.588307 0.588307 1.17661 2.35323 4.70646 9.41291 18.8258 37.6516 75.3033 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0005 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.087 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.054 x 4.452 at 30.11 degrees (North through East) ! Clean map min=-0.001146 max=0.087995 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J0755+6312_S_2017_08_12_pus_uvs.log closed on Fri May 10 14:55:16 2019