! Started logfile: J0754-3842_S_2017_09_26_pus_uvs.log on Sat May 11 12:58:05 2019 obs J0754-3842_S_2017_09_26_pus_uva.fits ! Reading UV FITS file: J0754-3842_S_2017_09_26_pus_uva.fits ! AN table 1: 147 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.1661 visibilities/baseline/integration-bin. ! *** This seems a bit low - see "help observe" on the binwid argument. ! Found source: J0754-3842 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 674 lines of history. ! ! Reading 3516 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J0754-3842_S_2017_09_26_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 736 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 736 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 736 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 1110 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.925740Jy sigma=0.005936 ! Fit after self-cal, rms=0.893605Jy sigma=0.005731 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=13.85 mas, bmaj=136.9 mas, bpa=-10.45 degrees ! Estimated noise=2667.81 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0879766 Jy ! Component: 100 - total flux cleaned = 0.107678 Jy ! Total flux subtracted in 100 components = 0.107678 Jy ! Clean residual min=-0.005313 max=0.007164 Jy/beam ! Clean residual mean=-0.000018 rms=0.002536 Jy/beam ! Combined flux in latest and established models = 0.107678 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 17 components and 0.107678 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.095916Jy sigma=0.000592 ! Fit after self-cal, rms=0.095827Jy sigma=0.000591 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=15.17 mas, bmaj=128 mas, bpa=-11 degrees ! Estimated noise=2083.69 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00574356 Jy ! Component: 100 - total flux cleaned = 0.00893176 Jy ! Component: 150 - total flux cleaned = 0.0100962 Jy ! Component: 200 - total flux cleaned = 0.0103587 Jy ! Total flux subtracted in 200 components = 0.0103587 Jy ! Clean residual min=-0.002237 max=0.002196 Jy/beam ! Clean residual mean=0.000030 rms=0.000907 Jy/beam ! Combined flux in latest and established models = 0.118037 Jy ! Performing phase self-cal ! Adding 88 model components to the UV plane model. ! The established model now contains 105 components and 0.118037 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.095450Jy sigma=0.000589 ! Fit after self-cal, rms=0.095391Jy sigma=0.000589 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.05 ! LA 1.02 MK 1.00* NL 1.00* OV 0.98 ! PT 1.00 ! ! ! Correcting IF 2. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 0.99 ! LA 1.05 MK 1.00* NL 1.00* OV 1.04 ! PT 0.98 ! ! ! Correcting IF 3. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 0.94 ! LA 1.04 MK 1.00* NL 1.00* OV 1.04 ! PT 0.97 ! ! ! Correcting IF 4. ! A total of 213 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.00* FD 0.00* HN 0.00* KP 0.00* ! LA 0.00* MK 0.00* NL 0.00* OV 0.00* ! PT 0.00* ! ! ! Fit before self-cal, rms=0.095391Jy sigma=0.000589 ! Fit after self-cal, rms=0.094428Jy sigma=0.000594 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=15.39 mas, bmaj=125 mas, bpa=-11.08 degrees ! Estimated noise=2155.26 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000651262 Jy ! Component: 100 - total flux cleaned = 0.000298789 Jy ! Component: 150 - total flux cleaned = 0.000127932 Jy ! Component: 200 - total flux cleaned = 6.73867e-05 Jy ! Total flux subtracted in 200 components = 6.73867e-05 Jy ! Clean residual min=-0.000531 max=0.000521 Jy/beam ! Clean residual mean=-0.000011 rms=0.000200 Jy/beam ! Combined flux in latest and established models = 0.118104 Jy ! Performing phase self-cal ! Adding 55 model components to the UV plane model. ! The established model now contains 160 components and 0.118104 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.094398Jy sigma=0.000594 ! Fit after self-cal, rms=0.094484Jy sigma=0.000593 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.094484Jy sigma=0.000593 ! Fit after self-cal, rms=0.094593Jy sigma=0.000593 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=15.41 mas, bmaj=125.1 mas, bpa=-11.08 degrees ! Estimated noise=2153.46 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000306568 Jy ! Component: 100 - total flux cleaned = -0.00030442 Jy ! Component: 150 - total flux cleaned = -0.000324875 Jy ! Component: 200 - total flux cleaned = -0.000216925 Jy ! Total flux subtracted in 200 components = -0.000216925 Jy ! Clean residual min=-0.000373 max=0.000378 Jy/beam ! Clean residual mean=-0.000003 rms=0.000137 Jy/beam ! Combined flux in latest and established models = 0.117887 Jy selfcal ! Performing phase self-cal ! Adding 70 model components to the UV plane model. ! The established model now contains 226 components and 0.117887 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.094584Jy sigma=0.000593 ! Fit after self-cal, rms=0.094616Jy sigma=0.000593 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000153109 Jy ! Component: 100 - total flux cleaned = -0.00021274 Jy ! Component: 150 - total flux cleaned = -0.000267512 Jy ! Component: 200 - total flux cleaned = -0.000341352 Jy ! Total flux subtracted in 200 components = -0.000341352 Jy ! Clean residual min=-0.000311 max=0.000311 Jy/beam ! Clean residual mean=-0.000008 rms=0.000131 Jy/beam ! Combined flux in latest and established models = 0.117546 Jy ! Performing phase self-cal ! Adding 77 model components to the UV plane model. ! The established model now contains 298 components and 0.117546 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.094610Jy sigma=0.000593 ! Fit after self-cal, rms=0.094613Jy sigma=0.000593 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.094613Jy sigma=0.000593 ! Fit after self-cal, rms=0.094709Jy sigma=0.000593 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=15.41 mas, bmaj=125.2 mas, bpa=-11.08 degrees ! Estimated noise=2154.47 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000184116 Jy ! Component: 100 - total flux cleaned = -0.000320221 Jy ! Component: 150 - total flux cleaned = -0.000503614 Jy ! Component: 200 - total flux cleaned = -0.000621651 Jy ! Total flux subtracted in 200 components = -0.000621651 Jy ! Clean residual min=-0.000280 max=0.000280 Jy/beam ! Clean residual mean=-0.000006 rms=0.000119 Jy/beam ! Combined flux in latest and established models = 0.116924 Jy selfcal ! Performing phase self-cal ! Adding 59 model components to the UV plane model. ! The established model now contains 350 components and 0.116924 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.094703Jy sigma=0.000593 ! Fit after self-cal, rms=0.094711Jy sigma=0.000593 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000154183 Jy ! Component: 100 - total flux cleaned = 0.000171152 Jy ! Component: 150 - total flux cleaned = 0.000171096 Jy ! Component: 200 - total flux cleaned = 0.000138411 Jy ! Total flux subtracted in 200 components = 0.000138411 Jy ! Clean residual min=-0.000277 max=0.000277 Jy/beam ! Clean residual mean=-0.000005 rms=0.000115 Jy/beam ! Combined flux in latest and established models = 0.117063 Jy ! Performing phase self-cal ! Adding 54 model components to the UV plane model. ! The established model now contains 397 components and 0.117063 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.094707Jy sigma=0.000593 ! Fit after self-cal, rms=0.094707Jy sigma=0.000593 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.094707Jy sigma=0.000593 ! Fit after self-cal, rms=0.094784Jy sigma=0.000593 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=15.79 mas, bmaj=123.9 mas, bpa=-11.16 degrees ! Estimated noise=2157.48 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000239261 Jy ! Component: 100 - total flux cleaned = -0.000390818 Jy ! Component: 150 - total flux cleaned = -0.0005099 Jy ! Component: 200 - total flux cleaned = -0.000597934 Jy ! Total flux subtracted in 200 components = -0.000597934 Jy ! Clean residual min=-0.000251 max=0.000247 Jy/beam ! Clean residual mean=-0.000006 rms=0.000106 Jy/beam ! Combined flux in latest and established models = 0.116465 Jy selfcal ! Performing phase self-cal ! Adding 54 model components to the UV plane model. ! The established model now contains 428 components and 0.116465 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.094780Jy sigma=0.000593 ! Fit after self-cal, rms=0.094781Jy sigma=0.000593 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -8.52732e-05 Jy ! Component: 100 - total flux cleaned = -0.000201848 Jy ! Component: 150 - total flux cleaned = -0.00034583 Jy ! Component: 200 - total flux cleaned = -0.000374236 Jy ! Total flux subtracted in 200 components = -0.000374236 Jy ! Clean residual min=-0.000248 max=0.000252 Jy/beam ! Clean residual mean=-0.000006 rms=0.000105 Jy/beam ! Combined flux in latest and established models = 0.11609 Jy ! Performing phase self-cal ! Adding 76 model components to the UV plane model. ! The established model now contains 464 components and 0.11609 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.094777Jy sigma=0.000593 ! Fit after self-cal, rms=0.094775Jy sigma=0.000593 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=15.42 mas, bmaj=125.2 mas, bpa=-11.09 degrees ! Estimated noise=2155.53 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 15.42 x 125.2 at -11.09 degrees (North through East) ! Clean map min=-0.002912 max=0.10346 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=14.67 mas, bmaj=132.7 mas, bpa=-10.33 degrees ! Estimated noise=2365.87 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0853693 Jy ! Component: 100 - total flux cleaned = 0.104051 Jy ! Component: 150 - total flux cleaned = 0.108321 Jy ! Component: 200 - total flux cleaned = 0.110219 Jy ! Total flux subtracted in 200 components = 0.110219 Jy ! Clean residual min=-0.003263 max=0.003347 Jy/beam ! Clean residual mean=0.000001 rms=0.001277 Jy/beam ! Combined flux in latest and established models = 0.110219 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 85 model components to the UV plane model. ! The established model now contains 85 components and 0.110219 Jy ! Inverting map and beam ! Estimated beam: bmin=15.42 mas, bmaj=125.2 mas, bpa=-11.09 degrees ! Estimated noise=2155.53 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 4.03137e-05 Jy ! Component: 100 - total flux cleaned = 0.00081223 Jy ! Component: 150 - total flux cleaned = 0.00182544 Jy ! Component: 200 - total flux cleaned = 0.00220167 Jy ! Total flux subtracted in 200 components = 0.00220167 Jy ! Clean residual min=-0.000857 max=0.000859 Jy/beam ! Clean residual mean=-0.000003 rms=0.000363 Jy/beam ! Combined flux in latest and established models = 0.112421 Jy ! Adding 84 model components to the UV plane model. ! The established model now contains 169 components and 0.112421 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=15.79 mas, bmaj=123.9 mas, bpa=-11.16 degrees ! Estimated noise=2157.48 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000715018 Jy ! Component: 100 - total flux cleaned = -0.00127734 Jy ! Component: 150 - total flux cleaned = -0.00143999 Jy ! Component: 200 - total flux cleaned = -0.00138425 Jy ! Total flux subtracted in 200 components = -0.00138425 Jy ! Clean residual min=-0.000480 max=0.000473 Jy/beam ! Clean residual mean=-0.000010 rms=0.000190 Jy/beam ! Combined flux in latest and established models = 0.111036 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -3.07556e-05 Jy ! Component: 100 - total flux cleaned = -0.00010415 Jy ! Component: 150 - total flux cleaned = -0.000193054 Jy ! Component: 200 - total flux cleaned = -0.000301337 Jy ! Total flux subtracted in 200 components = -0.000301337 Jy ! Clean residual min=-0.000955 max=0.000972 Jy/beam ! Clean residual mean=-0.000016 rms=0.000339 Jy/beam ! Combined flux in latest and established models = 0.110735 Jy ! Adding 78 model components to the UV plane model. ! The established model now contains 247 components and 0.110735 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=15.42 mas, bmaj=125.2 mas, bpa=-11.09 degrees ! Estimated noise=2155.53 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 9.28832e-05 Jy ! Component: 100 - total flux cleaned = -9.20698e-05 Jy ! Component: 150 - total flux cleaned = -1.01681e-05 Jy ! Component: 200 - total flux cleaned = 0.000133712 Jy ! Total flux subtracted in 200 components = 0.000133712 Jy ! Clean residual min=-0.000494 max=0.000493 Jy/beam ! Clean residual mean=-0.000011 rms=0.000196 Jy/beam ! Combined flux in latest and established models = 0.110869 Jy selfcal ! Performing phase self-cal ! Adding 46 model components to the UV plane model. ! The established model now contains 293 components and 0.110869 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.094796Jy sigma=0.000593 ! Fit after self-cal, rms=0.094787Jy sigma=0.000593 wmodel J0754-3842_S_2017_09_26_pus_map.mod ! Writing 293 model components to file: J0754-3842_S_2017_09_26_pus_map.mod wobs J0754-3842_S_2017_09_26_pus_uvs.fits ! Writing UV FITS file: J0754-3842_S_2017_09_26_pus_uvs.fits wwins J0754-3842_S_2017_09_26_pus_map.win ! wwins: No CLEAN windows to write. ! Error occured in command: wwins ![Exited script file: muppet] ! wmap "J0754-3842_S_2017_09_26_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 15.42 x 125.2 at -11.09 degrees (North through East) ! Clean map min=-0.0029158 max=0.10243 Jy/beam ! Writing clean map to FITS file: J0754-3842_S_2017_09_26_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.102433 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000185026 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.541895 0.541895 1.08379 2.16758 4.33516 8.67032 17.3406 34.6813 69.3626 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0005 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.102 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 15.42 x 125.2 at -11.09 degrees (North through East) ! Clean map min=-0.0029158 max=0.10243 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J0754-3842_S_2017_09_26_pus_uvs.log closed on Sat May 11 12:58:16 2019