! Started logfile: J0754-3842_S_2017_05_27_pus_uvs.log on Fri May 3 11:00:47 2019 obs J0754-3842_S_2017_05_27_pus_uva.fits ! Reading UV FITS file: J0754-3842_S_2017_05_27_pus_uva.fits ! AN table 1: 78 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.349288 visibilities/baseline/integration-bin. ! *** This seems a bit low - see "help observe" on the binwid argument. ! Found source: J0754-3842 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 1211 lines of history. ! ! Reading 4904 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J0754-3842_S_2017_05_27_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 351 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 344 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 344 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 780 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.980446Jy sigma=0.004962 ! Fit after self-cal, rms=0.912682Jy sigma=0.004672 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.272 mas, bmaj=6.677 mas, bpa=-2.081 degrees ! Estimated noise=4557.29 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0696937 Jy ! Component: 100 - total flux cleaned = 0.090042 Jy ! Total flux subtracted in 100 components = 0.090042 Jy ! Clean residual min=-0.013813 max=0.012209 Jy/beam ! Clean residual mean=-0.000004 rms=0.003876 Jy/beam ! Combined flux in latest and established models = 0.090042 Jy ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 7 components and 0.090042 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.141180Jy sigma=0.000628 ! Fit after self-cal, rms=0.140646Jy sigma=0.000625 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.156 mas, bmaj=9.053 mas, bpa=-0.0644 degrees ! Estimated noise=2523.07 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0135434 Jy ! Component: 100 - total flux cleaned = 0.0191731 Jy ! Component: 150 - total flux cleaned = 0.021618 Jy ! Component: 200 - total flux cleaned = 0.022682 Jy ! Total flux subtracted in 200 components = 0.022682 Jy ! Clean residual min=-0.007499 max=0.007269 Jy/beam ! Clean residual mean=-0.000020 rms=0.001733 Jy/beam ! Combined flux in latest and established models = 0.112724 Jy ! Performing phase self-cal ! Adding 30 model components to the UV plane model. ! The established model now contains 36 components and 0.112724 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.139446Jy sigma=0.000619 ! Fit after self-cal, rms=0.139218Jy sigma=0.000618 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.96 HN 1.00* KP 1.09 ! LA 0.85 MK 1.00* NL 0.87 OV 1.10 ! PT 1.00* SC 0.96 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.98 HN 1.00* KP 1.00 ! LA 1.02 MK 1.03 NL 0.98 OV 1.05 ! PT 1.00* SC 1.08 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.99 HN 1.00* KP 1.00 ! LA 1.04 MK 1.07 NL 0.87 OV 1.02 ! PT 1.00* SC 1.03 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 0.00* FD 0.00* HN 0.00* KP 0.00* ! LA 0.00* MK 0.00* NL 0.00* OV 0.00* ! PT 0.00* SC 0.00* ! ! ! Fit before self-cal, rms=0.139218Jy sigma=0.000618 ! Fit after self-cal, rms=0.133977Jy sigma=0.000616 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.224 mas, bmaj=9.181 mas, bpa=0.1787 degrees ! Estimated noise=2527.7 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 6.5257e-05 Jy ! Component: 100 - total flux cleaned = -1.03663e-05 Jy ! Component: 150 - total flux cleaned = -4.25981e-05 Jy ! Component: 200 - total flux cleaned = -6.97413e-05 Jy ! Total flux subtracted in 200 components = -6.97413e-05 Jy ! Clean residual min=-0.005761 max=0.005297 Jy/beam ! Clean residual mean=-0.000010 rms=0.001493 Jy/beam ! Combined flux in latest and established models = 0.112654 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 43 components and 0.112654 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.133961Jy sigma=0.000616 ! Fit after self-cal, rms=0.133839Jy sigma=0.000615 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.133839Jy sigma=0.000615 ! Fit after self-cal, rms=0.133268Jy sigma=0.000615 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.23 mas, bmaj=9.177 mas, bpa=0.1241 degrees ! Estimated noise=2520.09 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 1.31472e-05 Jy ! Component: 100 - total flux cleaned = -6.20658e-05 Jy ! Component: 150 - total flux cleaned = -9.57003e-05 Jy ! Component: 200 - total flux cleaned = -0.000125981 Jy ! Total flux subtracted in 200 components = -0.000125981 Jy ! Clean residual min=-0.005884 max=0.005438 Jy/beam ! Clean residual mean=-0.000011 rms=0.001532 Jy/beam ! Combined flux in latest and established models = 0.112528 Jy selfcal ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 43 components and 0.112528 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.133250Jy sigma=0.000615 ! Fit after self-cal, rms=0.133244Jy sigma=0.000615 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 6.18741e-05 Jy ! Component: 100 - total flux cleaned = 2.92764e-05 Jy ! Component: 150 - total flux cleaned = 2.67086e-05 Jy ! Component: 200 - total flux cleaned = 2.51778e-05 Jy ! Total flux subtracted in 200 components = 2.51778e-05 Jy ! Clean residual min=-0.005610 max=0.005227 Jy/beam ! Clean residual mean=-0.000012 rms=0.001486 Jy/beam ! Combined flux in latest and established models = 0.112553 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 46 components and 0.112553 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.133229Jy sigma=0.000615 ! Fit after self-cal, rms=0.133232Jy sigma=0.000615 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.133232Jy sigma=0.000615 ! Fit after self-cal, rms=0.132870Jy sigma=0.000615 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.221 mas, bmaj=9.152 mas, bpa=0.1684 degrees ! Estimated noise=2509.9 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000107451 Jy ! Component: 100 - total flux cleaned = 6.64382e-06 Jy ! Component: 150 - total flux cleaned = -5.12076e-05 Jy ! Component: 200 - total flux cleaned = -5.15195e-05 Jy ! Total flux subtracted in 200 components = -5.15195e-05 Jy ! Clean residual min=-0.005535 max=0.005147 Jy/beam ! Clean residual mean=-0.000011 rms=0.001477 Jy/beam ! Combined flux in latest and established models = 0.112502 Jy selfcal ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 47 components and 0.112502 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.132858Jy sigma=0.000615 ! Fit after self-cal, rms=0.132890Jy sigma=0.000615 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -4.76798e-06 Jy ! Component: 100 - total flux cleaned = -6.17588e-05 Jy ! Component: 150 - total flux cleaned = -6.3e-05 Jy ! Component: 200 - total flux cleaned = -3.81907e-05 Jy ! Total flux subtracted in 200 components = -3.81907e-05 Jy ! Clean residual min=-0.005520 max=0.005142 Jy/beam ! Clean residual mean=-0.000011 rms=0.001474 Jy/beam ! Combined flux in latest and established models = 0.112464 Jy ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 48 components and 0.112464 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.132880Jy sigma=0.000615 ! Fit after self-cal, rms=0.132884Jy sigma=0.000615 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.132884Jy sigma=0.000615 ! Fit after self-cal, rms=0.132664Jy sigma=0.000615 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.84 mas, bmaj=32.09 mas, bpa=0.8496 degrees ! Estimated noise=3021.79 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000321355 Jy ! Component: 100 - total flux cleaned = 0.000345595 Jy ! Component: 150 - total flux cleaned = 0.000356664 Jy ! Component: 200 - total flux cleaned = 0.000367723 Jy ! Total flux subtracted in 200 components = 0.000367723 Jy ! Clean residual min=-0.006295 max=0.004951 Jy/beam ! Clean residual mean=-0.000020 rms=0.001836 Jy/beam ! Combined flux in latest and established models = 0.112831 Jy selfcal ! Performing phase self-cal ! Adding 4 model components to the UV plane model. ! The established model now contains 50 components and 0.112831 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.132664Jy sigma=0.000615 ! Fit after self-cal, rms=0.132688Jy sigma=0.000615 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -2.79867e-05 Jy ! Component: 100 - total flux cleaned = -1.59502e-05 Jy ! Component: 150 - total flux cleaned = -4.7695e-06 Jy ! Component: 200 - total flux cleaned = 6.35116e-06 Jy ! Total flux subtracted in 200 components = 6.35116e-06 Jy ! Clean residual min=-0.006288 max=0.004944 Jy/beam ! Clean residual mean=-0.000020 rms=0.001835 Jy/beam ! Combined flux in latest and established models = 0.112838 Jy ! Performing phase self-cal ! Adding 5 model components to the UV plane model. ! The established model now contains 51 components and 0.112838 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.132688Jy sigma=0.000615 ! Fit after self-cal, rms=0.132691Jy sigma=0.000615 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.213 mas, bmaj=9.133 mas, bpa=0.2257 degrees ! Estimated noise=2501.46 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.213 x 9.133 at 0.2257 degrees (North through East) ! Clean map min=-0.0052411 max=0.090073 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.323 mas, bmaj=6.74 mas, bpa=-1.777 degrees ! Estimated noise=4551.31 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0673705 Jy ! Component: 100 - total flux cleaned = 0.0917316 Jy ! Component: 150 - total flux cleaned = 0.10351 Jy ! Component: 200 - total flux cleaned = 0.106168 Jy ! Total flux subtracted in 200 components = 0.106168 Jy ! Clean residual min=-0.011995 max=0.012133 Jy/beam ! Clean residual mean=-0.000003 rms=0.003639 Jy/beam ! Combined flux in latest and established models = 0.106168 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 15 model components to the UV plane model. ! The established model now contains 15 components and 0.106168 Jy ! Inverting map and beam ! Estimated beam: bmin=3.213 mas, bmaj=9.133 mas, bpa=0.2257 degrees ! Estimated noise=2501.46 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.005237 Jy ! Component: 100 - total flux cleaned = 0.00551294 Jy ! Component: 150 - total flux cleaned = 0.00565764 Jy ! Component: 200 - total flux cleaned = 0.00577377 Jy ! Total flux subtracted in 200 components = 0.00577377 Jy ! Clean residual min=-0.005678 max=0.005231 Jy/beam ! Clean residual mean=-0.000011 rms=0.001524 Jy/beam ! Combined flux in latest and established models = 0.111942 Jy ! Adding 7 model components to the UV plane model. ! The established model now contains 22 components and 0.111942 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.84 mas, bmaj=32.09 mas, bpa=0.8496 degrees ! Estimated noise=3021.79 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000649245 Jy ! Component: 100 - total flux cleaned = 0.000647356 Jy ! Component: 150 - total flux cleaned = 0.00064667 Jy ! Component: 200 - total flux cleaned = 0.00064643 Jy ! Total flux subtracted in 200 components = 0.00064643 Jy ! Clean residual min=-0.006366 max=0.005087 Jy/beam ! Clean residual mean=-0.000020 rms=0.001860 Jy/beam ! Combined flux in latest and established models = 0.112589 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 1.22614e-05 Jy ! Component: 100 - total flux cleaned = 3.55957e-05 Jy ! Component: 150 - total flux cleaned = 4.65324e-05 Jy ! Component: 200 - total flux cleaned = 5.8114e-05 Jy ! Total flux subtracted in 200 components = 5.8114e-05 Jy ! Clean residual min=-0.006335 max=0.005077 Jy/beam ! Clean residual mean=-0.000020 rms=0.001853 Jy/beam ! Combined flux in latest and established models = 0.112647 Jy ! Adding 8 model components to the UV plane model. ! The established model now contains 30 components and 0.112647 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.213 mas, bmaj=9.133 mas, bpa=0.2257 degrees ! Estimated noise=2501.46 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000552032 Jy ! Component: 100 - total flux cleaned = -0.000474932 Jy ! Component: 150 - total flux cleaned = -0.000372533 Jy ! Component: 200 - total flux cleaned = -0.000309697 Jy ! Total flux subtracted in 200 components = -0.000309697 Jy ! Clean residual min=-0.005602 max=0.005230 Jy/beam ! Clean residual mean=-0.000011 rms=0.001502 Jy/beam ! Combined flux in latest and established models = 0.112337 Jy selfcal ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 40 components and 0.112337 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.132735Jy sigma=0.000615 ! Fit after self-cal, rms=0.132735Jy sigma=0.000615 wmodel J0754-3842_S_2017_05_27_pus_map.mod ! Writing 40 model components to file: J0754-3842_S_2017_05_27_pus_map.mod wobs J0754-3842_S_2017_05_27_pus_uvs.fits ! Writing UV FITS file: J0754-3842_S_2017_05_27_pus_uvs.fits wwins J0754-3842_S_2017_05_27_pus_map.win ! wwins: Wrote 1 windows to J0754-3842_S_2017_05_27_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.00113427 Jy ! Component: 100 - total flux cleaned = -0.000802703 Jy ! Component: 150 - total flux cleaned = -0.00026912 Jy ! Component: 200 - total flux cleaned = 0.000353755 Jy ! Component: 250 - total flux cleaned = 0.000419457 Jy ! Component: 300 - total flux cleaned = 0.000300334 Jy ! Component: 350 - total flux cleaned = 0.000187552 Jy ! Component: 400 - total flux cleaned = 0.000134234 Jy ! Component: 450 - total flux cleaned = 8.31014e-05 Jy ! Component: 500 - total flux cleaned = 3.59061e-05 Jy ! Component: 550 - total flux cleaned = 3.66836e-05 Jy ! Component: 600 - total flux cleaned = -0.000103171 Jy ! Component: 650 - total flux cleaned = -0.000283561 Jy ! Component: 700 - total flux cleaned = -0.000328049 Jy ! Component: 750 - total flux cleaned = -0.000457961 Jy ! Component: 800 - total flux cleaned = -0.000373539 Jy ! Component: 850 - total flux cleaned = -0.000499074 Jy ! Component: 900 - total flux cleaned = -0.000540234 Jy ! Component: 950 - total flux cleaned = -0.000662589 Jy ! Component: 1000 - total flux cleaned = -0.000864608 Jy ! Component: 1050 - total flux cleaned = -0.000984878 Jy ! Component: 1100 - total flux cleaned = -0.00114382 Jy ! Component: 1150 - total flux cleaned = -0.00118344 Jy ! Component: 1200 - total flux cleaned = -0.00118345 Jy ! Component: 1250 - total flux cleaned = -0.00118355 Jy ! Component: 1300 - total flux cleaned = -0.00122261 Jy ! Component: 1350 - total flux cleaned = -0.00122272 Jy ! Component: 1400 - total flux cleaned = -0.00114471 Jy ! Component: 1450 - total flux cleaned = -0.00118343 Jy ! Component: 1500 - total flux cleaned = -0.0011448 Jy ! Component: 1550 - total flux cleaned = -0.00118378 Jy ! Component: 1600 - total flux cleaned = -0.00122257 Jy ! Component: 1650 - total flux cleaned = -0.00130009 Jy ! Component: 1700 - total flux cleaned = -0.00133926 Jy ! Component: 1750 - total flux cleaned = -0.00137815 Jy ! Component: 1800 - total flux cleaned = -0.00130006 Jy ! Component: 1850 - total flux cleaned = -0.00122188 Jy ! Component: 1900 - total flux cleaned = -0.00122207 Jy ! Component: 1950 - total flux cleaned = -0.00126181 Jy ! Component: 2000 - total flux cleaned = -0.00122193 Jy ! Component: 2050 - total flux cleaned = -0.0013018 Jy ! Component: 2100 - total flux cleaned = -0.00122206 Jy ! Component: 2150 - total flux cleaned = -0.00118163 Jy ! Component: 2200 - total flux cleaned = -0.00118165 Jy ! Component: 2250 - total flux cleaned = -0.00118154 Jy ! Component: 2300 - total flux cleaned = -0.00130732 Jy ! Component: 2350 - total flux cleaned = -0.00139139 Jy ! Component: 2400 - total flux cleaned = -0.00147658 Jy ! Component: 2450 - total flux cleaned = -0.00164962 Jy ! Component: 2500 - total flux cleaned = -0.00182688 Jy ! Component: 2550 - total flux cleaned = -0.00196274 Jy ! Component: 2600 - total flux cleaned = -0.0021014 Jy ! Component: 2650 - total flux cleaned = -0.00219615 Jy ! Component: 2700 - total flux cleaned = -0.0023403 Jy ! Component: 2750 - total flux cleaned = -0.0025366 Jy ! Component: 2800 - total flux cleaned = -0.00268763 Jy ! Component: 2850 - total flux cleaned = -0.00284069 Jy ! Component: 2900 - total flux cleaned = -0.00299753 Jy ! Component: 2950 - total flux cleaned = -0.0031577 Jy ! Component: 3000 - total flux cleaned = -0.00332155 Jy ! Component: 3050 - total flux cleaned = -0.00348943 Jy ! Component: 3100 - total flux cleaned = -0.00366233 Jy ! Component: 3150 - total flux cleaned = -0.00372136 Jy ! Component: 3200 - total flux cleaned = -0.00384394 Jy ! Component: 3250 - total flux cleaned = -0.00384399 Jy ! Component: 3300 - total flux cleaned = -0.00397195 Jy ! Component: 3350 - total flux cleaned = -0.00403697 Jy ! Component: 3400 - total flux cleaned = -0.00410436 Jy ! Component: 3450 - total flux cleaned = -0.00417297 Jy ! Component: 3500 - total flux cleaned = -0.00431596 Jy ! Component: 3550 - total flux cleaned = -0.00438892 Jy ! Component: 3600 - total flux cleaned = -0.00454114 Jy ! Component: 3650 - total flux cleaned = -0.00461964 Jy ! Component: 3700 - total flux cleaned = -0.00469806 Jy ! Component: 3750 - total flux cleaned = -0.00486302 Jy ! Component: 3800 - total flux cleaned = -0.00503347 Jy ! Component: 3850 - total flux cleaned = -0.00512003 Jy ! Component: 3900 - total flux cleaned = -0.00530019 Jy ! Component: 3950 - total flux cleaned = -0.00530042 Jy ! Component: 4000 - total flux cleaned = -0.00549219 Jy ! Component: 4050 - total flux cleaned = -0.00549254 Jy ! Total flux subtracted in 4096 components = -0.00549149 Jy ! Clean residual min=-0.006067 max=0.005404 Jy/beam ! Clean residual mean=0.000017 rms=0.001570 Jy/beam ! Combined flux in latest and established models = 0.106846 Jy keep ! Adding 199 model components to the UV plane model. ! The established model now contains 239 components and 0.106846 Jy ![Exited script file: muppet] wmap "J0754-3842_S_2017_05_27_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.213 x 9.133 at 0.2257 degrees (North through East) ! Clean map min=-0.0074567 max=0.090337 Jy/beam ! Writing clean map to FITS file: J0754-3842_S_2017_05_27_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.0903367 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.00166476 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -5.52852 5.52852 11.057 22.1141 44.2282 88.4564 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0049 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.09 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.213 x 9.133 at 0.2257 degrees (North through East) ! Clean map min=-0.0074567 max=0.090337 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J0754-3842_S_2017_05_27_pus_uvs.log closed on Fri May 3 11:00:52 2019