! Started logfile: J0754-3842_S_2017_03_27_pus_uvs.log on Sun Apr 28 14:35:29 2019 obs J0754-3842_S_2017_03_27_pus_uva.fits ! Reading UV FITS file: J0754-3842_S_2017_03_27_pus_uva.fits ! AN table 1: 100 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.452222 visibilities/baseline/integration-bin. ! *** This seems a bit low - see "help observe" on the binwid argument. ! Found source: J0754-3842 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 1684 lines of history. ! ! Reading 8140 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J0754-3842_S_2017_03_27_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 538 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 521 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 496 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 737 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.971362Jy sigma=0.005963 ! Fit after self-cal, rms=0.925751Jy sigma=0.005733 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.601 mas, bmaj=8.254 mas, bpa=3.861 degrees ! Estimated noise=5157.89 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0730937 Jy ! Component: 100 - total flux cleaned = 0.0990338 Jy ! Total flux subtracted in 100 components = 0.0990338 Jy ! Clean residual min=-0.017540 max=0.019606 Jy/beam ! Clean residual mean=0.000018 rms=0.004582 Jy/beam ! Combined flux in latest and established models = 0.0990338 Jy ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 22 components and 0.0990338 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.116389Jy sigma=0.000657 ! Fit after self-cal, rms=0.115668Jy sigma=0.000652 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.33 mas, bmaj=9.198 mas, bpa=3.535 degrees ! Estimated noise=1589.61 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00188579 Jy ! Component: 100 - total flux cleaned = 0.00188865 Jy ! Component: 150 - total flux cleaned = 0.00188636 Jy ! Component: 200 - total flux cleaned = 0.00188959 Jy ! Total flux subtracted in 200 components = 0.00188959 Jy ! Clean residual min=-0.004585 max=0.005030 Jy/beam ! Clean residual mean=-0.000103 rms=0.001263 Jy/beam ! Combined flux in latest and established models = 0.100923 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 33 components and 0.100923 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.115474Jy sigma=0.000650 ! Fit after self-cal, rms=0.115391Jy sigma=0.000650 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.07 FD 1.09 HN 0.54 KP 1.05 ! LA 1.02 MK 1.08 NL 1.00* OV 1.02 ! PT 0.95 SC 0.86 ! ! ! Correcting IF 2. ! A total of 18 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.08 FD 1.00 HN 0.49 KP 0.97 ! LA 0.93 MK 1.27 NL 1.06 OV 1.09 ! PT 1.00 SC 0.90 ! ! ! Correcting IF 3. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 0.98 HN 1.00* KP 1.09 ! LA 0.89 MK 1.12 NL 1.22 OV 0.93 ! PT 0.93 SC 1.20 ! ! ! Correcting IF 4. ! A total of 15 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.20 FD 1.02 HN 1.00* KP 1.00* ! LA 1.20 MK 1.00* NL 1.00* OV 0.96 ! PT 0.88 SC 0.35 ! ! ! Fit before self-cal, rms=0.115391Jy sigma=0.000650 ! Fit after self-cal, rms=0.121594Jy sigma=0.000645 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.391 mas, bmaj=9.359 mas, bpa=5.124 degrees ! Estimated noise=1636.96 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000561575 Jy ! Component: 100 - total flux cleaned = 0.000561936 Jy ! Component: 150 - total flux cleaned = 0.000600098 Jy ! Component: 200 - total flux cleaned = 0.000670348 Jy ! Total flux subtracted in 200 components = 0.000670348 Jy ! Clean residual min=-0.003641 max=0.004887 Jy/beam ! Clean residual mean=-0.000050 rms=0.001134 Jy/beam ! Combined flux in latest and established models = 0.101594 Jy ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 37 components and 0.101594 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.121569Jy sigma=0.000644 ! Fit after self-cal, rms=0.121883Jy sigma=0.000644 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.121883Jy sigma=0.000644 ! Fit after self-cal, rms=0.124239Jy sigma=0.000643 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.358 mas, bmaj=9.29 mas, bpa=5.717 degrees ! Estimated noise=1641.42 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00111201 Jy ! Component: 100 - total flux cleaned = 0.00114499 Jy ! Component: 150 - total flux cleaned = 0.00120557 Jy ! Component: 200 - total flux cleaned = 0.00123636 Jy ! Total flux subtracted in 200 components = 0.00123636 Jy ! Clean residual min=-0.003741 max=0.004923 Jy/beam ! Clean residual mean=-0.000053 rms=0.001140 Jy/beam ! Combined flux in latest and established models = 0.10283 Jy selfcal ! Performing phase self-cal ! Adding 6 model components to the UV plane model. ! The established model now contains 37 components and 0.10283 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.124214Jy sigma=0.000643 ! Fit after self-cal, rms=0.124321Jy sigma=0.000642 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-113, -16). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00341213 Jy ! Component: 100 - total flux cleaned = 0.00387915 Jy ! Component: 150 - total flux cleaned = 0.00425237 Jy ! Component: 200 - total flux cleaned = 0.004307 Jy ! Total flux subtracted in 200 components = 0.004307 Jy ! Clean residual min=-0.003465 max=0.003723 Jy/beam ! Clean residual mean=-0.000040 rms=0.001024 Jy/beam ! Combined flux in latest and established models = 0.107137 Jy ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 61 components and 0.107137 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.124163Jy sigma=0.000642 ! Fit after self-cal, rms=0.124094Jy sigma=0.000641 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.124094Jy sigma=0.000641 ! Fit after self-cal, rms=0.131543Jy sigma=0.000640 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.317 mas, bmaj=9.22 mas, bpa=6.07 degrees ! Estimated noise=1625.55 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0012161 Jy ! Component: 100 - total flux cleaned = 0.00135586 Jy ! Component: 150 - total flux cleaned = 0.00135393 Jy ! Component: 200 - total flux cleaned = 0.00140132 Jy ! Total flux subtracted in 200 components = 0.00140132 Jy ! Clean residual min=-0.003576 max=0.003639 Jy/beam ! Clean residual mean=-0.000039 rms=0.000984 Jy/beam ! Combined flux in latest and established models = 0.108538 Jy selfcal ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 65 components and 0.108538 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.131463Jy sigma=0.000640 ! Fit after self-cal, rms=0.131767Jy sigma=0.000640 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -5.94785e-05 Jy ! Component: 100 - total flux cleaned = -0.000116687 Jy ! Component: 150 - total flux cleaned = -6.96474e-05 Jy ! Component: 200 - total flux cleaned = -7.09952e-05 Jy ! Total flux subtracted in 200 components = -7.09952e-05 Jy ! Clean residual min=-0.003541 max=0.003551 Jy/beam ! Clean residual mean=-0.000035 rms=0.000971 Jy/beam ! Combined flux in latest and established models = 0.108467 Jy ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 66 components and 0.108467 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.131718Jy sigma=0.000639 ! Fit after self-cal, rms=0.131693Jy sigma=0.000639 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.131693Jy sigma=0.000639 ! Fit after self-cal, rms=0.135982Jy sigma=0.000639 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=9.755 mas, bmaj=34.41 mas, bpa=8.64 degrees ! Estimated noise=1963.33 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000558457 Jy ! Component: 100 - total flux cleaned = 0.000588606 Jy ! Component: 150 - total flux cleaned = 0.000588958 Jy ! Component: 200 - total flux cleaned = 0.000566226 Jy ! Total flux subtracted in 200 components = 0.000566226 Jy ! Clean residual min=-0.002833 max=0.003392 Jy/beam ! Clean residual mean=-0.000054 rms=0.001044 Jy/beam ! Combined flux in latest and established models = 0.109034 Jy selfcal ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 79 components and 0.109034 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.135964Jy sigma=0.000639 ! Fit after self-cal, rms=0.136014Jy sigma=0.000639 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 5.64609e-05 Jy ! Component: 100 - total flux cleaned = 3.47668e-05 Jy ! Component: 150 - total flux cleaned = -5.91583e-06 Jy ! Component: 200 - total flux cleaned = -4.28621e-05 Jy ! Total flux subtracted in 200 components = -4.28621e-05 Jy ! Clean residual min=-0.002812 max=0.003391 Jy/beam ! Clean residual mean=-0.000050 rms=0.001040 Jy/beam ! Combined flux in latest and established models = 0.108991 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 83 components and 0.108991 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.136007Jy sigma=0.000639 ! Fit after self-cal, rms=0.135999Jy sigma=0.000639 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.296 mas, bmaj=9.189 mas, bpa=6.387 degrees ! Estimated noise=1621.26 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.296 x 9.189 at 6.387 degrees (North through East) ! Clean map min=-0.0059865 max=0.076026 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.617 mas, bmaj=8.52 mas, bpa=5.279 degrees ! Estimated noise=4556.33 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.06158 Jy ! Component: 100 - total flux cleaned = 0.0821613 Jy ! Component: 150 - total flux cleaned = 0.0867329 Jy ! Component: 200 - total flux cleaned = 0.0909852 Jy ! Total flux subtracted in 200 components = 0.0909852 Jy ! Clean residual min=-0.011148 max=0.011374 Jy/beam ! Clean residual mean=-0.000020 rms=0.003107 Jy/beam ! Combined flux in latest and established models = 0.0909852 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 39 model components to the UV plane model. ! The established model now contains 39 components and 0.0909852 Jy ! Inverting map and beam ! Estimated beam: bmin=3.296 mas, bmaj=9.189 mas, bpa=6.387 degrees ! Estimated noise=1621.26 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-1, -7.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00879033 Jy ! Component: 100 - total flux cleaned = 0.0135759 Jy ! Component: 150 - total flux cleaned = 0.0166403 Jy ! Component: 200 - total flux cleaned = 0.0171917 Jy ! Total flux subtracted in 200 components = 0.0171917 Jy ! Clean residual min=-0.003739 max=0.003303 Jy/beam ! Clean residual mean=-0.000043 rms=0.000979 Jy/beam ! Combined flux in latest and established models = 0.108177 Jy ! Adding 31 model components to the UV plane model. ! The established model now contains 69 components and 0.108177 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=9.755 mas, bmaj=34.41 mas, bpa=8.64 degrees ! Estimated noise=1963.33 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00125369 Jy ! Component: 100 - total flux cleaned = 0.00129891 Jy ! Component: 150 - total flux cleaned = 0.00118407 Jy ! Component: 200 - total flux cleaned = 0.00107578 Jy ! Total flux subtracted in 200 components = 0.00107578 Jy ! Clean residual min=-0.002593 max=0.003142 Jy/beam ! Clean residual mean=-0.000057 rms=0.001004 Jy/beam ! Combined flux in latest and established models = 0.109253 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -6.48291e-05 Jy ! Component: 100 - total flux cleaned = -0.000127181 Jy ! Component: 150 - total flux cleaned = -0.000213412 Jy ! Component: 200 - total flux cleaned = -0.000266622 Jy ! Total flux subtracted in 200 components = -0.000266622 Jy ! Clean residual min=-0.002738 max=0.003130 Jy/beam ! Clean residual mean=-0.000052 rms=0.000981 Jy/beam ! Combined flux in latest and established models = 0.108986 Jy ! Adding 28 model components to the UV plane model. ! The established model now contains 93 components and 0.108986 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.296 mas, bmaj=9.189 mas, bpa=6.387 degrees ! Estimated noise=1621.26 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000649894 Jy ! Component: 100 - total flux cleaned = -0.0008809 Jy ! Component: 150 - total flux cleaned = -0.000985269 Jy ! Component: 200 - total flux cleaned = -0.00108456 Jy ! Total flux subtracted in 200 components = -0.00108456 Jy ! Clean residual min=-0.003673 max=0.003200 Jy/beam ! Clean residual mean=-0.000031 rms=0.000914 Jy/beam ! Combined flux in latest and established models = 0.107901 Jy selfcal ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 106 components and 0.107901 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.135952Jy sigma=0.000639 ! Fit after self-cal, rms=0.135914Jy sigma=0.000639 wmodel J0754-3842_S_2017_03_27_pus_map.mod ! Writing 106 model components to file: J0754-3842_S_2017_03_27_pus_map.mod wobs J0754-3842_S_2017_03_27_pus_uvs.fits ! Writing UV FITS file: J0754-3842_S_2017_03_27_pus_uvs.fits wwins J0754-3842_S_2017_03_27_pus_map.win ! wwins: Wrote 3 windows to J0754-3842_S_2017_03_27_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000967268 Jy ! Component: 100 - total flux cleaned = -0.000646914 Jy ! Component: 150 - total flux cleaned = -0.000244362 Jy ! Component: 200 - total flux cleaned = -5.31405e-05 Jy ! Component: 250 - total flux cleaned = 8.41853e-05 Jy ! Component: 300 - total flux cleaned = 0.000214671 Jy ! Component: 350 - total flux cleaned = 0.000464796 Jy ! Component: 400 - total flux cleaned = 0.000704842 Jy ! Component: 450 - total flux cleaned = 0.000821432 Jy ! Component: 500 - total flux cleaned = 0.000897522 Jy ! Component: 550 - total flux cleaned = 0.00111628 Jy ! Component: 600 - total flux cleaned = 0.00111567 Jy ! Component: 650 - total flux cleaned = 0.00121907 Jy ! Component: 700 - total flux cleaned = 0.00135348 Jy ! Component: 750 - total flux cleaned = 0.00155113 Jy ! Component: 800 - total flux cleaned = 0.00167919 Jy ! Component: 850 - total flux cleaned = 0.00189874 Jy ! Component: 900 - total flux cleaned = 0.00208177 Jy ! Component: 950 - total flux cleaned = 0.00214118 Jy ! Component: 1000 - total flux cleaned = 0.00225883 Jy ! Component: 1050 - total flux cleaned = 0.0022872 Jy ! Component: 1100 - total flux cleaned = 0.00234347 Jy ! Component: 1150 - total flux cleaned = 0.00237089 Jy ! Component: 1200 - total flux cleaned = 0.00242541 Jy ! Component: 1250 - total flux cleaned = 0.00237171 Jy ! Component: 1300 - total flux cleaned = 0.00245035 Jy ! Component: 1350 - total flux cleaned = 0.00242439 Jy ! Component: 1400 - total flux cleaned = 0.00237319 Jy ! Component: 1450 - total flux cleaned = 0.00242291 Jy ! Component: 1500 - total flux cleaned = 0.00244707 Jy ! Component: 1550 - total flux cleaned = 0.00234957 Jy ! Component: 1600 - total flux cleaned = 0.00242183 Jy ! Component: 1650 - total flux cleaned = 0.00244563 Jy ! Component: 1700 - total flux cleaned = 0.00246881 Jy ! Component: 1750 - total flux cleaned = 0.00249164 Jy ! Component: 1800 - total flux cleaned = 0.00255972 Jy ! Component: 1850 - total flux cleaned = 0.0026043 Jy ! Component: 1900 - total flux cleaned = 0.0025825 Jy ! Component: 1950 - total flux cleaned = 0.00271365 Jy ! Component: 2000 - total flux cleaned = 0.0027352 Jy ! Component: 2050 - total flux cleaned = 0.00279911 Jy ! Component: 2100 - total flux cleaned = 0.00292597 Jy ! Component: 2150 - total flux cleaned = 0.00300943 Jy ! Component: 2200 - total flux cleaned = 0.00305095 Jy ! Component: 2250 - total flux cleaned = 0.00311268 Jy ! Component: 2300 - total flux cleaned = 0.00321457 Jy ! Component: 2350 - total flux cleaned = 0.00327507 Jy ! Component: 2400 - total flux cleaned = 0.00337523 Jy ! Component: 2450 - total flux cleaned = 0.00341499 Jy ! Component: 2500 - total flux cleaned = 0.00349425 Jy ! Component: 2550 - total flux cleaned = 0.00355318 Jy ! Component: 2600 - total flux cleaned = 0.00359215 Jy ! Component: 2650 - total flux cleaned = 0.00365061 Jy ! Component: 2700 - total flux cleaned = 0.00366997 Jy ! Component: 2750 - total flux cleaned = 0.00374722 Jy ! Component: 2800 - total flux cleaned = 0.00382402 Jy ! Component: 2850 - total flux cleaned = 0.0038623 Jy ! Component: 2900 - total flux cleaned = 0.00393853 Jy ! Component: 2950 - total flux cleaned = 0.00403353 Jy ! Component: 3000 - total flux cleaned = 0.00409031 Jy ! Component: 3050 - total flux cleaned = 0.00412818 Jy ! Component: 3100 - total flux cleaned = 0.00420368 Jy ! Component: 3150 - total flux cleaned = 0.00427918 Jy ! Component: 3200 - total flux cleaned = 0.00435445 Jy ! Component: 3250 - total flux cleaned = 0.00441086 Jy ! Component: 3300 - total flux cleaned = 0.00446742 Jy ! Component: 3350 - total flux cleaned = 0.00456166 Jy ! Component: 3400 - total flux cleaned = 0.00461819 Jy ! Component: 3450 - total flux cleaned = 0.00461816 Jy ! Component: 3500 - total flux cleaned = 0.00465597 Jy ! Component: 3550 - total flux cleaned = 0.00469377 Jy ! Component: 3600 - total flux cleaned = 0.00473171 Jy ! Component: 3650 - total flux cleaned = 0.00476971 Jy ! Component: 3700 - total flux cleaned = 0.00480793 Jy ! Component: 3750 - total flux cleaned = 0.00480793 Jy ! Component: 3800 - total flux cleaned = 0.00480782 Jy ! Component: 3850 - total flux cleaned = 0.00486556 Jy ! Component: 3900 - total flux cleaned = 0.00486554 Jy ! Component: 3950 - total flux cleaned = 0.00490434 Jy ! Component: 4000 - total flux cleaned = 0.0049045 Jy ! Component: 4050 - total flux cleaned = 0.00492393 Jy ! Total flux subtracted in 4096 components = 0.0049436 Jy ! Clean residual min=-0.001109 max=0.001153 Jy/beam ! Clean residual mean=-0.000004 rms=0.000337 Jy/beam ! Combined flux in latest and established models = 0.112845 Jy keep ! Adding 222 model components to the UV plane model. ! The established model now contains 328 components and 0.112845 Jy ![Exited script file: muppet] wmap "J0754-3842_S_2017_03_27_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.296 x 9.189 at 6.387 degrees (North through East) ! Clean map min=-0.0056789 max=0.073609 Jy/beam ! Writing clean map to FITS file: J0754-3842_S_2017_03_27_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.0736085 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000345389 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -1.40767 1.40767 2.81534 5.63069 11.2614 22.5227 45.0455 90.091 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.001 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.073 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.296 x 9.189 at 6.387 degrees (North through East) ! Clean map min=-0.0056789 max=0.073609 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J0754-3842_S_2017_03_27_pus_uvs.log closed on Sun Apr 28 14:35:34 2019