! Started logfile: J0751-3331_S_2017_03_27_pus_uvs.log on Sun Apr 28 14:35:24 2019 obs J0751-3331_S_2017_03_27_pus_uva.fits ! Reading UV FITS file: J0751-3331_S_2017_03_27_pus_uva.fits ! AN table 1: 100 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.697556 visibilities/baseline/integration-bin. ! Found source: J0751-3331 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 1684 lines of history. ! ! Reading 12556 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J0751-3331_S_2017_03_27_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 271 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 229 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 272 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 490 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.934186Jy sigma=0.005731 ! Fit after self-cal, rms=0.903346Jy sigma=0.005570 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.62 mas, bmaj=8.293 mas, bpa=2.613 degrees ! Estimated noise=2841.54 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0726272 Jy ! Component: 100 - total flux cleaned = 0.097279 Jy ! Total flux subtracted in 100 components = 0.097279 Jy ! Clean residual min=-0.009382 max=0.012009 Jy/beam ! Clean residual mean=-0.000094 rms=0.002341 Jy/beam ! Combined flux in latest and established models = 0.097279 Jy ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 20 components and 0.097279 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.127016Jy sigma=0.000689 ! Fit after self-cal, rms=0.126817Jy sigma=0.000688 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.176 mas, bmaj=9.08 mas, bpa=2.283 degrees ! Estimated noise=1186.2 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.023061 Jy ! Component: 100 - total flux cleaned = 0.0338967 Jy ! Component: 150 - total flux cleaned = 0.0393183 Jy ! Component: 200 - total flux cleaned = 0.0420618 Jy ! Total flux subtracted in 200 components = 0.0420618 Jy ! Clean residual min=-0.003988 max=0.006420 Jy/beam ! Clean residual mean=-0.000041 rms=0.001281 Jy/beam ! Combined flux in latest and established models = 0.139341 Jy ! Performing phase self-cal ! Adding 43 model components to the UV plane model. ! The established model now contains 58 components and 0.139341 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.123282Jy sigma=0.000659 ! Fit after self-cal, rms=0.123227Jy sigma=0.000658 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.97 FD 0.96 HN 1.48 KP 1.05 ! LA 0.99 MK 1.15 NL 1.14 OV 1.01 ! PT 0.99 SC 0.94 ! ! ! Correcting IF 2. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.97 FD 0.99 HN 1.43 KP 1.01 ! LA 0.94 MK 1.08 NL 1.10 OV 0.99 ! PT 0.97 SC 1.05 ! ! ! Correcting IF 3. ! A total of 6 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.87 FD 1.02 HN 1.69 KP 1.00 ! LA 1.00 MK 1.08 NL 1.02 OV 0.99 ! PT 0.95 SC 1.06 ! ! ! Correcting IF 4. ! A total of 51 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.96 FD 0.97 HN 1.15 KP 1.00* ! LA 0.84 MK 0.92 NL 1.00* OV 0.77 ! PT 0.95 SC 0.85 ! ! ! Fit before self-cal, rms=0.123227Jy sigma=0.000658 ! Fit after self-cal, rms=0.133557Jy sigma=0.000654 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.242 mas, bmaj=9.111 mas, bpa=3.034 degrees ! Estimated noise=1211.69 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000227988 Jy ! Component: 100 - total flux cleaned = -0.0003262 Jy ! Component: 150 - total flux cleaned = -0.000386485 Jy ! Component: 200 - total flux cleaned = -0.000442809 Jy ! Total flux subtracted in 200 components = -0.000442809 Jy ! Clean residual min=-0.003441 max=0.003803 Jy/beam ! Clean residual mean=-0.000013 rms=0.000859 Jy/beam ! Combined flux in latest and established models = 0.138898 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 67 components and 0.138898 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.133536Jy sigma=0.000654 ! Fit after self-cal, rms=0.133759Jy sigma=0.000654 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.133759Jy sigma=0.000654 ! Fit after self-cal, rms=0.138490Jy sigma=0.000652 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.261 mas, bmaj=9.142 mas, bpa=3.2 degrees ! Estimated noise=1215.97 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000194805 Jy ! Component: 100 - total flux cleaned = -0.000249076 Jy ! Component: 150 - total flux cleaned = -0.000323981 Jy ! Component: 200 - total flux cleaned = -0.00034702 Jy ! Total flux subtracted in 200 components = -0.00034702 Jy ! Clean residual min=-0.003227 max=0.003044 Jy/beam ! Clean residual mean=-0.000011 rms=0.000764 Jy/beam ! Combined flux in latest and established models = 0.138551 Jy selfcal ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 72 components and 0.138551 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.138474Jy sigma=0.000652 ! Fit after self-cal, rms=0.138577Jy sigma=0.000652 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -2.63001e-05 Jy ! Component: 100 - total flux cleaned = -7.14707e-05 Jy ! Component: 150 - total flux cleaned = -0.000113505 Jy ! Component: 200 - total flux cleaned = -0.00011362 Jy ! Total flux subtracted in 200 components = -0.00011362 Jy ! Clean residual min=-0.003172 max=0.003109 Jy/beam ! Clean residual mean=-0.000011 rms=0.000764 Jy/beam ! Combined flux in latest and established models = 0.138437 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 73 components and 0.138437 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.138566Jy sigma=0.000652 ! Fit after self-cal, rms=0.138559Jy sigma=0.000652 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.138559Jy sigma=0.000652 ! Fit after self-cal, rms=0.139281Jy sigma=0.000652 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.27 mas, bmaj=9.164 mas, bpa=3.284 degrees ! Estimated noise=1215.93 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000247981 Jy ! Component: 100 - total flux cleaned = -0.000290291 Jy ! Component: 150 - total flux cleaned = -0.000329324 Jy ! Component: 200 - total flux cleaned = -0.000329284 Jy ! Total flux subtracted in 200 components = -0.000329284 Jy ! Clean residual min=-0.003129 max=0.003034 Jy/beam ! Clean residual mean=-0.000011 rms=0.000759 Jy/beam ! Combined flux in latest and established models = 0.138108 Jy selfcal ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 73 components and 0.138108 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.139272Jy sigma=0.000652 ! Fit after self-cal, rms=0.139283Jy sigma=0.000652 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -4.34217e-05 Jy ! Component: 100 - total flux cleaned = -4.26574e-05 Jy ! Component: 150 - total flux cleaned = -6.09036e-05 Jy ! Component: 200 - total flux cleaned = -7.8298e-05 Jy ! Total flux subtracted in 200 components = -7.8298e-05 Jy ! Clean residual min=-0.003104 max=0.003035 Jy/beam ! Clean residual mean=-0.000011 rms=0.000759 Jy/beam ! Combined flux in latest and established models = 0.13803 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 73 components and 0.13803 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.139276Jy sigma=0.000652 ! Fit after self-cal, rms=0.139267Jy sigma=0.000652 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.139267Jy sigma=0.000652 ! Fit after self-cal, rms=0.139450Jy sigma=0.000652 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.838 mas, bmaj=26.4 mas, bpa=6.836 degrees ! Estimated noise=1416.57 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000331908 Jy ! Component: 100 - total flux cleaned = 0.000334613 Jy ! Component: 150 - total flux cleaned = 0.000334891 Jy ! Component: 200 - total flux cleaned = 0.000347105 Jy ! Total flux subtracted in 200 components = 0.000347105 Jy ! Clean residual min=-0.003032 max=0.002453 Jy/beam ! Clean residual mean=-0.000014 rms=0.000833 Jy/beam ! Combined flux in latest and established models = 0.138377 Jy selfcal ! Performing phase self-cal ! Adding 5 model components to the UV plane model. ! The established model now contains 74 components and 0.138377 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.139450Jy sigma=0.000652 ! Fit after self-cal, rms=0.139455Jy sigma=0.000652 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 4.02645e-05 Jy ! Component: 100 - total flux cleaned = 3.89962e-05 Jy ! Component: 150 - total flux cleaned = 3.67963e-05 Jy ! Component: 200 - total flux cleaned = 3.5067e-05 Jy ! Total flux subtracted in 200 components = 3.5067e-05 Jy ! Clean residual min=-0.003025 max=0.002451 Jy/beam ! Clean residual mean=-0.000014 rms=0.000832 Jy/beam ! Combined flux in latest and established models = 0.138412 Jy ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 77 components and 0.138412 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.139455Jy sigma=0.000652 ! Fit after self-cal, rms=0.139455Jy sigma=0.000652 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.276 mas, bmaj=9.179 mas, bpa=3.352 degrees ! Estimated noise=1216.02 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.276 x 9.179 at 3.352 degrees (North through East) ! Clean map min=-0.0029305 max=0.098556 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.676 mas, bmaj=8.372 mas, bpa=3.523 degrees ! Estimated noise=2885.06 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0721482 Jy ! Component: 100 - total flux cleaned = 0.0986785 Jy ! Component: 150 - total flux cleaned = 0.113247 Jy ! Component: 200 - total flux cleaned = 0.121734 Jy ! Total flux subtracted in 200 components = 0.121734 Jy ! Clean residual min=-0.007899 max=0.006463 Jy/beam ! Clean residual mean=-0.000030 rms=0.001708 Jy/beam ! Combined flux in latest and established models = 0.121734 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 36 model components to the UV plane model. ! The established model now contains 36 components and 0.121734 Jy ! Inverting map and beam ! Estimated beam: bmin=3.276 mas, bmaj=9.179 mas, bpa=3.352 degrees ! Estimated noise=1216.02 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00881898 Jy ! Component: 100 - total flux cleaned = 0.0125462 Jy ! Component: 150 - total flux cleaned = 0.0143043 Jy ! Component: 200 - total flux cleaned = 0.0146452 Jy ! Total flux subtracted in 200 components = 0.0146452 Jy ! Clean residual min=-0.003151 max=0.003165 Jy/beam ! Clean residual mean=-0.000014 rms=0.000784 Jy/beam ! Combined flux in latest and established models = 0.13638 Jy ! Adding 14 model components to the UV plane model. ! The established model now contains 45 components and 0.13638 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.838 mas, bmaj=26.4 mas, bpa=6.836 degrees ! Estimated noise=1416.57 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00130362 Jy ! Component: 100 - total flux cleaned = 0.00137101 Jy ! Component: 150 - total flux cleaned = 0.00141123 Jy ! Component: 200 - total flux cleaned = 0.0014486 Jy ! Total flux subtracted in 200 components = 0.0014486 Jy ! Clean residual min=-0.003024 max=0.002599 Jy/beam ! Clean residual mean=-0.000018 rms=0.000850 Jy/beam ! Combined flux in latest and established models = 0.137828 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 3.47464e-05 Jy ! Component: 100 - total flux cleaned = 6.76991e-05 Jy ! Component: 150 - total flux cleaned = 9.70971e-05 Jy ! Component: 200 - total flux cleaned = 0.00012512 Jy ! Total flux subtracted in 200 components = 0.00012512 Jy ! Clean residual min=-0.003023 max=0.002549 Jy/beam ! Clean residual mean=-0.000017 rms=0.000844 Jy/beam ! Combined flux in latest and established models = 0.137953 Jy ! Adding 6 model components to the UV plane model. ! The established model now contains 46 components and 0.137953 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.276 mas, bmaj=9.179 mas, bpa=3.352 degrees ! Estimated noise=1216.02 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000417884 Jy ! Component: 100 - total flux cleaned = -0.000550639 Jy ! Component: 150 - total flux cleaned = -0.00063586 Jy ! Component: 200 - total flux cleaned = -0.000673119 Jy ! Total flux subtracted in 200 components = -0.000673119 Jy ! Clean residual min=-0.003110 max=0.003172 Jy/beam ! Clean residual mean=-0.000012 rms=0.000768 Jy/beam ! Combined flux in latest and established models = 0.13728 Jy selfcal ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 59 components and 0.13728 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.139493Jy sigma=0.000652 ! Fit after self-cal, rms=0.139490Jy sigma=0.000652 wmodel J0751-3331_S_2017_03_27_pus_map.mod ! Writing 59 model components to file: J0751-3331_S_2017_03_27_pus_map.mod wobs J0751-3331_S_2017_03_27_pus_uvs.fits ! Writing UV FITS file: J0751-3331_S_2017_03_27_pus_uvs.fits wwins J0751-3331_S_2017_03_27_pus_map.win ! wwins: Wrote 1 windows to J0751-3331_S_2017_03_27_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000167691 Jy ! Component: 100 - total flux cleaned = -0.000326186 Jy ! Component: 150 - total flux cleaned = -0.000376077 Jy ! Component: 200 - total flux cleaned = -0.000511821 Jy ! Component: 250 - total flux cleaned = -0.000511908 Jy ! Component: 300 - total flux cleaned = -0.000638434 Jy ! Component: 350 - total flux cleaned = -0.000719319 Jy ! Component: 400 - total flux cleaned = -0.000602505 Jy ! Component: 450 - total flux cleaned = -0.000640337 Jy ! Component: 500 - total flux cleaned = -0.000455777 Jy ! Component: 550 - total flux cleaned = -0.000347855 Jy ! Component: 600 - total flux cleaned = -0.000241635 Jy ! Component: 650 - total flux cleaned = -0.000103411 Jy ! Component: 700 - total flux cleaned = 3.24076e-05 Jy ! Component: 750 - total flux cleaned = 3.25636e-05 Jy ! Component: 800 - total flux cleaned = 0.0001643 Jy ! Component: 850 - total flux cleaned = 0.000357275 Jy ! Component: 900 - total flux cleaned = 0.000325492 Jy ! Component: 950 - total flux cleaned = 0.000513657 Jy ! Component: 1000 - total flux cleaned = 0.000606229 Jy ! Component: 1050 - total flux cleaned = 0.000606708 Jy ! Component: 1100 - total flux cleaned = 0.000696966 Jy ! Component: 1150 - total flux cleaned = 0.000755797 Jy ! Component: 1200 - total flux cleaned = 0.000843168 Jy ! Component: 1250 - total flux cleaned = 0.000843229 Jy ! Component: 1300 - total flux cleaned = 0.000928833 Jy ! Component: 1350 - total flux cleaned = 0.000928417 Jy ! Component: 1400 - total flux cleaned = 0.000928372 Jy ! Component: 1450 - total flux cleaned = 0.000928237 Jy ! Component: 1500 - total flux cleaned = 0.0009551 Jy ! Component: 1550 - total flux cleaned = 0.000928107 Jy ! Component: 1600 - total flux cleaned = 0.000928129 Jy ! Component: 1650 - total flux cleaned = 0.000901856 Jy ! Component: 1700 - total flux cleaned = 0.000876061 Jy ! Component: 1750 - total flux cleaned = 0.000953062 Jy ! Component: 1800 - total flux cleaned = 0.00100358 Jy ! Component: 1850 - total flux cleaned = 0.000927483 Jy ! Component: 1900 - total flux cleaned = 0.000827818 Jy ! Component: 1950 - total flux cleaned = 0.00095187 Jy ! Component: 2000 - total flux cleaned = 0.000951955 Jy ! Component: 2050 - total flux cleaned = 0.00102502 Jy ! Component: 2100 - total flux cleaned = 0.00114552 Jy ! Component: 2150 - total flux cleaned = 0.00116905 Jy ! Component: 2200 - total flux cleaned = 0.00114522 Jy ! Component: 2250 - total flux cleaned = 0.00123971 Jy ! Component: 2300 - total flux cleaned = 0.00126327 Jy ! Component: 2350 - total flux cleaned = 0.00130995 Jy ! Component: 2400 - total flux cleaned = 0.00133351 Jy ! Component: 2450 - total flux cleaned = 0.00133364 Jy ! Component: 2500 - total flux cleaned = 0.00140201 Jy ! Component: 2550 - total flux cleaned = 0.0013793 Jy ! Component: 2600 - total flux cleaned = 0.00149129 Jy ! Component: 2650 - total flux cleaned = 0.00137972 Jy ! Component: 2700 - total flux cleaned = 0.00137975 Jy ! Component: 2750 - total flux cleaned = 0.00142378 Jy ! Component: 2800 - total flux cleaned = 0.00138013 Jy ! Component: 2850 - total flux cleaned = 0.00148873 Jy ! Component: 2900 - total flux cleaned = 0.00146721 Jy ! Component: 2950 - total flux cleaned = 0.00151027 Jy ! Component: 3000 - total flux cleaned = 0.0015104 Jy ! Component: 3050 - total flux cleaned = 0.00148919 Jy ! Component: 3100 - total flux cleaned = 0.00151037 Jy ! Component: 3150 - total flux cleaned = 0.00153125 Jy ! Component: 3200 - total flux cleaned = 0.00146871 Jy ! Component: 3250 - total flux cleaned = 0.00132384 Jy ! Component: 3300 - total flux cleaned = 0.00132394 Jy ! Component: 3350 - total flux cleaned = 0.00134466 Jy ! Component: 3400 - total flux cleaned = 0.00130387 Jy ! Component: 3450 - total flux cleaned = 0.00120259 Jy ! Component: 3500 - total flux cleaned = 0.00122286 Jy ! Component: 3550 - total flux cleaned = 0.00122279 Jy ! Component: 3600 - total flux cleaned = 0.00114274 Jy ! Component: 3650 - total flux cleaned = 0.00112292 Jy ! Component: 3700 - total flux cleaned = 0.00112287 Jy ! Component: 3750 - total flux cleaned = 0.00116241 Jy ! Component: 3800 - total flux cleaned = 0.00108371 Jy ! Component: 3850 - total flux cleaned = 0.00114256 Jy ! Component: 3900 - total flux cleaned = 0.00110353 Jy ! Component: 3950 - total flux cleaned = 0.00114248 Jy ! Component: 4000 - total flux cleaned = 0.00110368 Jy ! Component: 4050 - total flux cleaned = 0.00112296 Jy ! Total flux subtracted in 4096 components = 0.00112303 Jy ! Clean residual min=-0.001014 max=0.001145 Jy/beam ! Clean residual mean=-0.000001 rms=0.000349 Jy/beam ! Combined flux in latest and established models = 0.138403 Jy keep ! Adding 280 model components to the UV plane model. ! The established model now contains 339 components and 0.138403 Jy ![Exited script file: muppet] wmap "J0751-3331_S_2017_03_27_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.276 x 9.179 at 3.352 degrees (North through East) ! Clean map min=-0.0028294 max=0.099993 Jy/beam ! Writing clean map to FITS file: J0751-3331_S_2017_03_27_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.0999927 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000344596 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -1.03386 1.03386 2.06773 4.13545 8.2709 16.5418 33.0836 66.1672 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.001 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.099 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.276 x 9.179 at 3.352 degrees (North through East) ! Clean map min=-0.0028294 max=0.099993 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J0751-3331_S_2017_03_27_pus_uvs.log closed on Sun Apr 28 14:35:29 2019