! Started logfile: J0750-3759_S_2017_09_26_pus_uvs.log on Sat May 11 12:57:59 2019 obs J0750-3759_S_2017_09_26_pus_uva.fits ! Reading UV FITS file: J0750-3759_S_2017_09_26_pus_uva.fits ! AN table 1: 294 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.302816 visibilities/baseline/integration-bin. ! *** This seems a bit low - see "help observe" on the binwid argument. ! Found source: J0750-3759 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 674 lines of history. ! ! Reading 12820 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J0750-3759_S_2017_09_26_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 1378 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 1693 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 1619 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 2409 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.986020Jy sigma=0.006338 ! Fit after self-cal, rms=0.923945Jy sigma=0.005932 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.008 mas, bmaj=15.59 mas, bpa=-18.82 degrees ! Estimated noise=2275.02 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0553923 Jy ! Component: 100 - total flux cleaned = 0.0699696 Jy ! Total flux subtracted in 100 components = 0.0699696 Jy ! Clean residual min=-0.008605 max=0.007946 Jy/beam ! Clean residual mean=-0.000641 rms=0.003027 Jy/beam ! Combined flux in latest and established models = 0.0699696 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 10 components and 0.0699696 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.104429Jy sigma=0.000650 ! Fit after self-cal, rms=0.103579Jy sigma=0.000645 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=4.281 mas, bmaj=21.33 mas, bpa=-17.93 degrees ! Estimated noise=1407.03 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0160452 Jy ! Component: 100 - total flux cleaned = 0.023826 Jy ! Component: 150 - total flux cleaned = 0.0279165 Jy ! Component: 200 - total flux cleaned = 0.0300814 Jy ! Total flux subtracted in 200 components = 0.0300814 Jy ! Clean residual min=-0.014361 max=0.012407 Jy/beam ! Clean residual mean=-0.001730 rms=0.006688 Jy/beam ! Combined flux in latest and established models = 0.100051 Jy ! Performing phase self-cal ! Adding 41 model components to the UV plane model. ! The established model now contains 49 components and 0.100051 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.101365Jy sigma=0.000629 ! Fit after self-cal, rms=0.101214Jy sigma=0.000628 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.36 ! LA 0.81 MK 1.06 NL 1.00* OV 1.38 ! PT 0.86 ! ! ! Correcting IF 2. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.42 ! LA 0.71 MK 1.19 NL 1.00* OV 1.43 ! PT 0.79 ! ! ! Correcting IF 3. ! A total of 213 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.01 FD 1.00* HN 1.00* KP 1.19 ! LA 0.85 MK 1.02 NL 0.90 OV 1.23 ! PT 0.93 ! ! ! Correcting IF 4. ! A total of 177 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.00* ! LA 0.97 MK 1.10 NL 1.00* OV 1.34 ! PT 0.93 ! ! ! Fit before self-cal, rms=0.101214Jy sigma=0.000628 ! Fit after self-cal, rms=0.108734Jy sigma=0.000613 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=4.161 mas, bmaj=21.1 mas, bpa=-17.61 degrees ! Estimated noise=1504.49 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000942903 Jy ! Component: 100 - total flux cleaned = 0.00106763 Jy ! Component: 150 - total flux cleaned = 0.00117957 Jy ! Component: 200 - total flux cleaned = 0.00122987 Jy ! Total flux subtracted in 200 components = 0.00122987 Jy ! Clean residual min=-0.011865 max=0.014379 Jy/beam ! Clean residual mean=-0.000788 rms=0.004228 Jy/beam ! Combined flux in latest and established models = 0.101281 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 60 components and 0.101281 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.108639Jy sigma=0.000613 ! Fit after self-cal, rms=0.111105Jy sigma=0.000608 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.111105Jy sigma=0.000608 ! Fit after self-cal, rms=0.129268Jy sigma=0.000584 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=4.215 mas, bmaj=20.95 mas, bpa=-17.9 degrees ! Estimated noise=1589.75 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00220625 Jy ! Component: 100 - total flux cleaned = 0.00236971 Jy ! Component: 150 - total flux cleaned = 0.00255952 Jy ! Component: 200 - total flux cleaned = 0.00268607 Jy ! Total flux subtracted in 200 components = 0.00268607 Jy ! Clean residual min=-0.005934 max=0.008813 Jy/beam ! Clean residual mean=-0.000239 rms=0.001914 Jy/beam ! Combined flux in latest and established models = 0.103967 Jy selfcal ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 71 components and 0.103967 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.129153Jy sigma=0.000584 ! Fit after self-cal, rms=0.130537Jy sigma=0.000582 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (7, 125.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00640812 Jy ! Component: 100 - total flux cleaned = 0.00777012 Jy ! Component: 150 - total flux cleaned = 0.00792473 Jy ! Component: 200 - total flux cleaned = 0.00798472 Jy ! Total flux subtracted in 200 components = 0.00798472 Jy ! Clean residual min=-0.004830 max=0.005728 Jy/beam ! Clean residual mean=-0.000111 rms=0.001415 Jy/beam ! Combined flux in latest and established models = 0.111952 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 82 components and 0.111952 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.130164Jy sigma=0.000579 ! Fit after self-cal, rms=0.129207Jy sigma=0.000578 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.129207Jy sigma=0.000578 ! Fit after self-cal, rms=0.129546Jy sigma=0.000577 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=4.211 mas, bmaj=20.81 mas, bpa=-17.82 degrees ! Estimated noise=1582.78 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0030349 Jy ! Component: 100 - total flux cleaned = 0.00288052 Jy ! Component: 150 - total flux cleaned = 0.00256565 Jy ! Component: 200 - total flux cleaned = 0.00261662 Jy ! Total flux subtracted in 200 components = 0.00261662 Jy ! Clean residual min=-0.004050 max=0.004188 Jy/beam ! Clean residual mean=-0.000004 rms=0.001112 Jy/beam ! Combined flux in latest and established models = 0.114568 Jy selfcal ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 96 components and 0.114568 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.129305Jy sigma=0.000576 ! Fit after self-cal, rms=0.128694Jy sigma=0.000576 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00230466 Jy ! Component: 100 - total flux cleaned = 0.00224647 Jy ! Component: 150 - total flux cleaned = 0.00230547 Jy ! Component: 200 - total flux cleaned = 0.00230464 Jy ! Total flux subtracted in 200 components = 0.00230464 Jy ! Clean residual min=-0.003445 max=0.003939 Jy/beam ! Clean residual mean=0.000039 rms=0.001079 Jy/beam ! Combined flux in latest and established models = 0.116873 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 106 components and 0.116873 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.128521Jy sigma=0.000575 ! Fit after self-cal, rms=0.128005Jy sigma=0.000575 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.128005Jy sigma=0.000575 ! Fit after self-cal, rms=0.123324Jy sigma=0.000575 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=12.04 mas, bmaj=41.05 mas, bpa=-2.558 degrees ! Estimated noise=1753.11 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00204813 Jy ! Component: 100 - total flux cleaned = 0.00190564 Jy ! Component: 150 - total flux cleaned = 0.00175544 Jy ! Component: 200 - total flux cleaned = 0.00175268 Jy ! Total flux subtracted in 200 components = 0.00175268 Jy ! Clean residual min=-0.003649 max=0.003549 Jy/beam ! Clean residual mean=-0.000014 rms=0.001207 Jy/beam ! Combined flux in latest and established models = 0.118626 Jy selfcal ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 120 components and 0.118626 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.123239Jy sigma=0.000574 ! Fit after self-cal, rms=0.122617Jy sigma=0.000574 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00124445 Jy ! Component: 100 - total flux cleaned = 0.00125232 Jy ! Component: 150 - total flux cleaned = 0.00135034 Jy ! Component: 200 - total flux cleaned = 0.00143882 Jy ! Total flux subtracted in 200 components = 0.00143882 Jy ! Clean residual min=-0.003605 max=0.003634 Jy/beam ! Clean residual mean=0.000012 rms=0.001205 Jy/beam ! Combined flux in latest and established models = 0.120064 Jy ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 124 components and 0.120064 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.122537Jy sigma=0.000574 ! Fit after self-cal, rms=0.122157Jy sigma=0.000574 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=4.205 mas, bmaj=20.8 mas, bpa=-17.52 degrees ! Estimated noise=1561.37 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.205 x 20.8 at -17.52 degrees (North through East) ! Clean map min=-0.0070579 max=0.071456 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.065 mas, bmaj=15.43 mas, bpa=-18.14 degrees ! Estimated noise=2578.26 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0598237 Jy ! Component: 100 - total flux cleaned = 0.081608 Jy ! Component: 150 - total flux cleaned = 0.0946054 Jy ! Component: 200 - total flux cleaned = 0.102484 Jy ! Total flux subtracted in 200 components = 0.102484 Jy ! Clean residual min=-0.007848 max=0.007957 Jy/beam ! Clean residual mean=-0.000129 rms=0.002112 Jy/beam ! Combined flux in latest and established models = 0.102484 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 23 model components to the UV plane model. ! The established model now contains 23 components and 0.102484 Jy ! Inverting map and beam ! Estimated beam: bmin=4.205 mas, bmaj=20.8 mas, bpa=-17.52 degrees ! Estimated noise=1561.37 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00991162 Jy ! Component: 100 - total flux cleaned = 0.0115891 Jy ! Component: 150 - total flux cleaned = 0.0125418 Jy ! Component: 200 - total flux cleaned = 0.0130581 Jy ! Total flux subtracted in 200 components = 0.0130581 Jy ! Clean residual min=-0.005127 max=0.004854 Jy/beam ! Clean residual mean=-0.000082 rms=0.001305 Jy/beam ! Combined flux in latest and established models = 0.115542 Jy ! Adding 49 model components to the UV plane model. ! The established model now contains 67 components and 0.115542 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=12.04 mas, bmaj=41.05 mas, bpa=-2.558 degrees ! Estimated noise=1753.11 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000806865 Jy ! Component: 100 - total flux cleaned = 0.0013491 Jy ! Component: 150 - total flux cleaned = 0.00188296 Jy ! Component: 200 - total flux cleaned = 0.00232604 Jy ! Total flux subtracted in 200 components = 0.00232604 Jy ! Clean residual min=-0.004452 max=0.004133 Jy/beam ! Clean residual mean=-0.000055 rms=0.001280 Jy/beam ! Combined flux in latest and established models = 0.117868 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000310031 Jy ! Component: 100 - total flux cleaned = 0.000574512 Jy ! Component: 150 - total flux cleaned = 0.000755194 Jy ! Component: 200 - total flux cleaned = 0.000869994 Jy ! Total flux subtracted in 200 components = 0.000869994 Jy ! Clean residual min=-0.003887 max=0.004096 Jy/beam ! Clean residual mean=-0.000033 rms=0.001211 Jy/beam ! Combined flux in latest and established models = 0.118738 Jy ! Adding 47 model components to the UV plane model. ! The established model now contains 111 components and 0.118738 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=4.205 mas, bmaj=20.8 mas, bpa=-17.52 degrees ! Estimated noise=1561.37 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00029089 Jy ! Component: 100 - total flux cleaned = -0.000293718 Jy ! Component: 150 - total flux cleaned = -0.00024422 Jy ! Component: 200 - total flux cleaned = -6.43056e-05 Jy ! Total flux subtracted in 200 components = -6.43056e-05 Jy ! Clean residual min=-0.003543 max=0.004100 Jy/beam ! Clean residual mean=-0.000038 rms=0.001036 Jy/beam ! Combined flux in latest and established models = 0.118674 Jy selfcal ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 127 components and 0.118674 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.121945Jy sigma=0.000573 ! Fit after self-cal, rms=0.121635Jy sigma=0.000573 wmodel J0750-3759_S_2017_09_26_pus_map.mod ! Writing 127 model components to file: J0750-3759_S_2017_09_26_pus_map.mod wobs J0750-3759_S_2017_09_26_pus_uvs.fits ! Writing UV FITS file: J0750-3759_S_2017_09_26_pus_uvs.fits wwins J0750-3759_S_2017_09_26_pus_map.win ! wwins: Wrote 2 windows to J0750-3759_S_2017_09_26_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.000163103 Jy ! Component: 100 - total flux cleaned = 9.96995e-05 Jy ! Component: 150 - total flux cleaned = 0.000412289 Jy ! Component: 200 - total flux cleaned = 0.000649223 Jy ! Component: 250 - total flux cleaned = 0.000822862 Jy ! Component: 300 - total flux cleaned = 0.000943101 Jy ! Component: 350 - total flux cleaned = 0.000942836 Jy ! Component: 400 - total flux cleaned = 0.000977539 Jy ! Component: 450 - total flux cleaned = 0.00107571 Jy ! Component: 500 - total flux cleaned = 0.00122916 Jy ! Component: 550 - total flux cleaned = 0.00137528 Jy ! Component: 600 - total flux cleaned = 0.00145918 Jy ! Component: 650 - total flux cleaned = 0.00148614 Jy ! Component: 700 - total flux cleaned = 0.00145902 Jy ! Component: 750 - total flux cleaned = 0.00156095 Jy ! Component: 800 - total flux cleaned = 0.00170913 Jy ! Component: 850 - total flux cleaned = 0.00190256 Jy ! Component: 900 - total flux cleaned = 0.00204437 Jy ! Component: 950 - total flux cleaned = 0.00216027 Jy ! Component: 1000 - total flux cleaned = 0.00229622 Jy ! Component: 1050 - total flux cleaned = 0.00240712 Jy ! Component: 1100 - total flux cleaned = 0.00249385 Jy ! Component: 1150 - total flux cleaned = 0.00257917 Jy ! Component: 1200 - total flux cleaned = 0.00266308 Jy ! Component: 1250 - total flux cleaned = 0.00274557 Jy ! Component: 1300 - total flux cleaned = 0.00280638 Jy ! Component: 1350 - total flux cleaned = 0.00286649 Jy ! Component: 1400 - total flux cleaned = 0.00292578 Jy ! Component: 1450 - total flux cleaned = 0.00300348 Jy ! Component: 1500 - total flux cleaned = 0.00304196 Jy ! Component: 1550 - total flux cleaned = 0.00306094 Jy ! Component: 1600 - total flux cleaned = 0.00307963 Jy ! Component: 1650 - total flux cleaned = 0.00311675 Jy ! Component: 1700 - total flux cleaned = 0.00313499 Jy ! Component: 1750 - total flux cleaned = 0.00317124 Jy ! Component: 1800 - total flux cleaned = 0.00317129 Jy ! Component: 1850 - total flux cleaned = 0.003207 Jy ! Component: 1900 - total flux cleaned = 0.0032246 Jy ! Component: 1950 - total flux cleaned = 0.00324224 Jy ! Component: 2000 - total flux cleaned = 0.00327746 Jy ! Component: 2050 - total flux cleaned = 0.00331241 Jy ! Component: 2100 - total flux cleaned = 0.00332997 Jy ! Component: 2150 - total flux cleaned = 0.00345176 Jy ! Component: 2200 - total flux cleaned = 0.0035908 Jy ! Component: 2250 - total flux cleaned = 0.00371239 Jy ! Component: 2300 - total flux cleaned = 0.00378191 Jy ! Component: 2350 - total flux cleaned = 0.0037992 Jy ! Component: 2400 - total flux cleaned = 0.0038515 Jy ! Component: 2450 - total flux cleaned = 0.00386905 Jy ! Component: 2500 - total flux cleaned = 0.00388637 Jy ! Component: 2550 - total flux cleaned = 0.00395698 Jy ! Component: 2600 - total flux cleaned = 0.00399242 Jy ! Component: 2650 - total flux cleaned = 0.00402794 Jy ! Component: 2700 - total flux cleaned = 0.00402797 Jy ! Component: 2750 - total flux cleaned = 0.0040815 Jy ! Component: 2800 - total flux cleaned = 0.00408145 Jy ! Component: 2850 - total flux cleaned = 0.0040994 Jy ! Component: 2900 - total flux cleaned = 0.00408097 Jy ! Component: 2950 - total flux cleaned = 0.00408093 Jy ! Component: 3000 - total flux cleaned = 0.00402545 Jy ! Component: 3050 - total flux cleaned = 0.00400687 Jy ! Component: 3100 - total flux cleaned = 0.00395036 Jy ! Component: 3150 - total flux cleaned = 0.0039122 Jy ! Component: 3200 - total flux cleaned = 0.00387332 Jy ! Component: 3250 - total flux cleaned = 0.00383449 Jy ! Component: 3300 - total flux cleaned = 0.00379495 Jy ! Component: 3350 - total flux cleaned = 0.00373504 Jy ! Component: 3400 - total flux cleaned = 0.00367409 Jy ! Component: 3450 - total flux cleaned = 0.00365386 Jy ! Component: 3500 - total flux cleaned = 0.0036541 Jy ! Component: 3550 - total flux cleaned = 0.00367515 Jy ! Component: 3600 - total flux cleaned = 0.00367534 Jy ! Component: 3650 - total flux cleaned = 0.00365361 Jy ! Component: 3700 - total flux cleaned = 0.0036533 Jy ! Component: 3750 - total flux cleaned = 0.0036535 Jy ! Component: 3800 - total flux cleaned = 0.00363029 Jy ! Component: 3850 - total flux cleaned = 0.00363008 Jy ! Component: 3900 - total flux cleaned = 0.00363012 Jy ! Component: 3950 - total flux cleaned = 0.00363029 Jy ! Component: 4000 - total flux cleaned = 0.00363039 Jy ! Component: 4050 - total flux cleaned = 0.00363053 Jy ! Total flux subtracted in 4096 components = 0.00365679 Jy ! Clean residual min=-0.001453 max=0.001550 Jy/beam ! Clean residual mean=0.000033 rms=0.000484 Jy/beam ! Combined flux in latest and established models = 0.12233 Jy keep ! Adding 216 model components to the UV plane model. ! The established model now contains 339 components and 0.12233 Jy ![Exited script file: muppet] wmap "J0750-3759_S_2017_09_26_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.205 x 20.8 at -17.52 degrees (North through East) ! Clean map min=-0.0097261 max=0.079085 Jy/beam ! Writing clean map to FITS file: J0750-3759_S_2017_09_26_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.0790846 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000572101 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -2.17021 2.17021 4.34042 8.68084 17.3617 34.7234 69.4467 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0017 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.079 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.205 x 20.8 at -17.52 degrees (North through East) ! Clean map min=-0.0097261 max=0.079085 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J0750-3759_S_2017_09_26_pus_uvs.log closed on Sat May 11 12:58:05 2019